Electric Chain Hoist Er2 And Ner 2 Series Cylinder Control-PDF Free Download

5. NOT use hoist with twisted, kinked, damaged, or worn load chain. 6. NOT use the hoist to lift, support, or transport people. 7. NOT lift loads over people. 8. NOT operate a hoist unless all persons are and remain clear of the supported load. 9. NOT operate unless load is centered under hoist. 10. NOT attempt to lengthen the load chain or .

Normal Headroom Hoist, MT Series (4/1) Normal Headroom Hoist, M Series (4/1) Low Headroom Hoist, MT Series (2/1) Low Headroom Hoist, M Series (2/1) Low Headroom Hoist, MT Series (4/1) Low Headroom Hoist, M Series (4/1) Explosion-proof Electric Wire Rope Hoist Double Girder Trolleys. Lifting & Travel Electr

(Paragraph 2-2) in area to be used; connect hoist to nearest air supply (paragraph 2-3); and check and adjust hoist speed (paragraph 2-4). 2-2. SUSPENDING HOIST. a. On hook suspended hoists, select a suitable overhead support in area hoist is to be used (one capable of holding combined weight of hoist and its rated load) and hang hoist up.

nb-m-04 trolley; double girder medium, 4 rope falls d002081-a nb-v-m1 hoist; machinery hoist 1 rope fall d002083-a nb-v-m2 hoist; machinery hoist 2 rope falls, opposite direct d002084-a nb-v-m2 hoist; machinery hoist 2 rope falls

nc-m-08 trolley; double girder medium, 8 rope falls d002103-a nc-v-m1 hoist; machinery hoist 1 rope fall d002108-a nc-v-m2 hoist; machinery hoist 2 rope falls, opposite direct d002109-a nc-v-m2 hoist; machinery hoist 2 rope falls

support structure has the sufficient strength to support the hoist and the rated working load. 2. Connect the hoist to the appropriate power supply. 3. Before using the hoist, apply oil to the chain for easier operation and to prolong the life span. 4. To attach the chain bag/ container run the hoist until it is fully extended (DOWN) and then .

6 DO NOT ECEED WORKING OAD IMIT. LE ALLS A 00-216-213 3 Ton Lift Lever Hoist 6 Ton Lift Lever Hoist STOCK NUMBER DESCRIPTION CAPACITY WEIGHT MLH30005 3 Ton, 5' Lift Lever Hoist 6,600 lbs. 36 lbs. MLH30010 3 Ton, 10' Lift Lever Hoist 6,600 lbs. 42 lbs. MLH30015 3 Ton, 15' Lift Lever Hoist 6,600 lbs. 48 lbs. MLH30020 3 Ton, 20' Lift Lever Hoist 6,600 lbs. 54 lbs.

26. Never weld or cut on a load suspended by the hoist. 27. Never use the hoist chain as a welding electrode. 28. Do not operate hoist if chain jumping, excessive noise, jamming, overloading, or binding occurs. 29. Only operate the hoist with manual power. 30. After use, or when in a non-operational mode the chain hoist should be secured against

hoist to air service (Paragraph 2-4). 2-2. SUSPENDING HOIST. a.On hook suspended hoists, select a suitable overhead support in area hoist is to be used (one capable of holding combined weight of hoist and its capacity load) and hang hoist up. Be certain that upper hook is firmly seated

NOT attempt to "free-chain" the hoist while a load is applied. 9. NOT use the hoist to lift, support, or transport people. 10. NOT lift loads over people and make sure all personnel remain clear of the supported load. 11. NOT attempt to lengthen the load chain or repair damaged load chain. 12. Protect the hoist's load chain from weld .

Hoist. This added I-ton single chain, 2-ton double chain and 3-ton triple chain models to the BUDGIT@ Air Hoist family. Series 6000 hoists are based on the same dependable BUDGIT@ Electric Hoist frame and feature many interchangeable parts. A need

from the hoist at 9 positions in accordance with DIN 45635, precision class 2. 2. OPERATING INSTRUCTIONS 2.1Correct operation Maximum capacity The Yale electric chain hoist model CPE is designed to lift and lower loads up to the rated capacity. The lifting capacity indicated on the hoist / trolley is the maximum safe working

HITACHI Electric Chain Hoist S series Outline F series Others 1 2. Operating time and load ratio Standard Specifications Specifications When selecting an electric chain hoist, the operating environment, operating time, and operating frequency must be taken into consideration. Operation Method 2(3) Standard model CE Making model

ROBERT HARWOOD TRADING SUPPLIERS OF LASHING SYSTEMS AND LIFTING EQUIPMENT (EAST ANGLIA) LTD o Ratchet Lever Hoists Economy Ratchet Lever Hoist Able Economy Ratchet Lever Hoist Gunnebo Ratchet Lever Hoists Tiger Lever Hoist PROLH Lever Hoist Tiger Lever Hoist Yale Pul-Lifts D85 Pul-Lift with Zinc Plated Link Chain C85 Pul-Lift with

Never use the hoist to lift, support, or transport people. Never lift loads over or near people. Before lifting a load, confirm that the lever hoist is in good condition and functioning properly. Inspect the lever hoist regularly. Never use a lever hoist when malfunction, unusual performance, damage, or extensive wear are found.

OPERATOR OR NEARBY PERSONNEL BY RELEASED LOAD OR BROKEN HOIST COMPONENTS. ! WARNING -DO NOT LIFT MORE THAN RATED LOAD. 2 INSPECT -DO NOT OPERATE DAMAGED OR MALFUNCTIONING HOIST. -DO NOT OPERATE WITH TWISTED, KINKED OR DAMAGED CHAIN. 3 USE HOIST PROPERLY Be sure hoist is solidly held in the uppermost part of the support hook arc.

10. Obvious signs of damage to the hoist slack end chain anchor. 11. General damage to the hoist body, this can be an indicator of neglect throughout the hoist. 12. The load chain wheel should be checked for damage or debris 13. Chain guides and strippers should be free of debris and in good condition. 14. Operating instructions should be .

7. Do not strike the lever handle with a hammer or any other object. 8. Do not use the load chain as a sling. This may cause damage to the chain. 9. Always inspect the lever hoist for damage prior to use. If hoist is damaged, do not use until it has been repaired or replaced. 10. Do not use more than one lever hoist to lift or move a load.

DO NOT operate hoist with other than manual power. DO NOT permit more than one operator to pull on a single hand chain at one time. DO NOT allow your attention to be diverted from operating the hoist. DO NOT operate hoist beyond limits of load chain travel. DO NOT use hoist to lift, sup

15 Tonne Chain Hoists - 6m Fall 9 Tonne Lever Hoist - 1.5m Fall 15 Tonne Chain Hoists - 12m Fall northernstrands.com 20 Tonne Chain Hoists - 3m fall 20 Tonne Chain Hoists - 6m fall LEVER HOISTS 0.25 Tonne Lever Hoist - 1.5m Fall 0.5 Tonne Lever Hoist - 1.5m Fall

push button station. If the hoist moves in the wrong direction shut off incoming power to the hoist. Switch wires connected to terminals 5 and 8 in the control box. c. DC Motor: Test to see if the hoist moves up or down when pressing the corresponding buttons on the push button station. If the hoist moves in the wrong direction shut off .

models wire rope hoist monorail hoist crab hoist wire rope hoist varients type lifting capacity up to (kg) rope reeving monorail crab clh 03 3000 4/1 ü clx 03 2500 4/1 ü clh / clhd 05 5000 2/1 , 4/1 ü ü clx / clxd 05 3000 2/1, 4/1 ü ü clh / clhd 7.5 7500 4/1 ü ü clx / clxd 7.5 6000 4/1 ü ü clh / clhd 1

All pulls or lifts must be made with straight chain that is free of obstacles. 14. If the lever is difficult to operate, then the load exceeds the capacity of the hoist. Select a hoist of larger capacity. 15. Do not use hoist if the chain is twisted, kinked or damaged. 16. Do not operate hoist unless load is centered between top and bottom .

hoist rated load (setting on the unit would be the individual rope load which corresponds to the required hoist trip load). The unit is only “seeing” the load on the individual rope or chain, which should be equally shared by all the falls of rope, or chain. For example: a hoist with 4

This lever hoist should not be installed, operated, or maintained by any person who has not read all the contents of these instructions, and ASMe B30.21, Safety Standard for lever Hoists. . Remove chain with hoist in free-wheeling mode. 3. Inspect chain, end ring, warning label, and load hook. CHaIN Inspect chain at least once a month .

chain. 7.NOT operate with any lever extension (cheater bar). 8.NOT attempt to fifree-chainfl the hoist while load is applied. 9.NOT use the hoist to lift, support, or transport people. 10.NOT lift loads over people and make sure all personnel remain clear of supported load. 11.NOT attempt to lengthen the load chain or repair damaged load chain.

Kettenzug "stationär" "Stationary" chain hoist Palan à chaîne "fixe accroché" Kettenzug mit Rollfahrwerk Chain hoist with push trolley Palan à chaîne avec chariot de direction par poussée Kettenzug mit Elektrofahrwerk Chain hoist with electric trolley Palan à chaîne avec chariot électrique Gewicht [kg] Weight [kg] Poids [kg]

ASME B30.11 Safety Standard for Monorails and Underhung Cranes ASME B30.17 Safety Standard for Overhead and Gantry Cranes, Top Running Bridge, Single Girder, Underhung Hoist. Electric Chain Hoist

3. Subject each hoist to a regular inspection and maintenance procedure. 4. Be aware of hoist capacity and weight of load at all times. WARNING The hoist is not designed or suitable for lifting, lowering or moving persons. Never lift loads over people. Positioning Unloaded Hook (Neutral Position) Refer to Dwg. MHP0830 on page 4.

malfunctioning hoist. Inspect hoist carefully and test operation before every use. 4. Do not lift people or lift loads over people. Falling loads can injure or kill people. 5. Do not operate hoist with anything other than manual power (by hand). 6. Do not remove or cover warning labels and/ or tags. These carry important safety information.

Model REMA YA ratchet hoist is a robust ratchet lever hoist suitable for lifting, pulling, tensioning and lashing in any directions. Properties-Grade 10 Galvanized load chain with high tensile strength (EN 818/7). - Compact construction and very low self-weight. - Reliable self-locked brake which will retain the load at every required height.

Do not use this hoist if the cable is frayed, kinked, or wrapped incorrectly on the reel. Replace only with a similar cable. Be sure the plug and power cord are in good working order. Do not use this hoist if there is damage to the power cord. If the cord or remote control becomes damaged, replace before using this hoist.

A robust and heavy duty chain hoist for heavy and intesive lifting jobs. High security (double pawl system), ergonomic and low operating force. Equipped with a double chain guide. Standard ligting height of 3 meter. . Hand-Lever Hoist Estil EPT Standard lifting height 1,5 meter. Can be used in all directions. Top and bottom hook with swivel .

Note: Ingersoll Rand VL2, MCH5, SMB, THV and ULM2/S series manual chain hoist meet or exceed ANSI B30.16 standards. Lever Chain Hoist Model Rated Capacity Shipping Weight Pull to Lift metric Chain with 10' of Lift Rated Load Page lb tons Falls lb kglb No. L5H PReMiuM SeRieS L5H150 1,650 0.

5. Do not exceed the rated capacity of the hoist. 6. Do not attempt to extend the lever handle using a "cheater pipe" or any other such device. 7. Do not strike the lever handle with a hammer or any other object. 8. Do not use the chain as a sling. This may cause damage to the chain. 9. Always inspect the lever hoist for damage prior to use.

R619.) 4-ton, 40' Lift Yale aluminum suspension manual chain hoist R620.) 2-ton, 12' Lift Coffering aluminum suspension manual chain hoist R621.) 2-ton, 38' Lift Peerless aluminum suspension manual chain hoist R622.) Lot of (2) - 1-ton, 20' Lift CM Seri

Electrical equipment described herein is designed and built in compliance with Vulcan Hoist’s interpretation of ANSI / NFPA 70,”National Electric Code” and CSA C22.1, “Canadian Electric Code”. The system designer, system manufactur

Custom-designed fall protection bridge crane system sharing a runway with a Mass Crane and Hoist built . 15 Ton Double Girder Bridge Crane Individual and group crane and hoist operational and . . Spanco Shaw-Box TC/American Tractel Yale. Mass Crane & Hoist Tyngsboro, MA. p 800-909-2299 i

9. Every time the hoist is to be rigged or used, check that the hoist, wire rope and other components of the suspended scaffold system are complete and in good working condition, prior to proceeding. 10. A careful and regular inspection of the TIRAK hoist, its wire rope and other components of the installa-tion is part of the safety .

10. Never leave or store the lever hoist with the brake system locked.Loosen the brake system by operating the lever hoist as if lowering a load. 11. Always service and repair the lever hoist after use.Thoroughly clean the dust or if used in the rain, wipe off the dirt and moisture and lubricate the lever hoist to prevent rust. 12.