Flanges Ameritube-PDF Free Download

707 SW 19th Ave. Williston, FL 32696 1-800-FLANGE1 352-528-4100 www.ancorp.com 5 QF63 Flanges QF80 Flanges QF100 Flanges QF160 Flanges QF200 Flanges ANCORP now offers quick flanges up to size QF200 (8 inch tube outer diameter). ISO standards only

Flanges CL150 ASME B16.5 Note 1: Socket weld flanges up to 3" in this pressure rating. Note 2: For Lapped flanges, add 1.6mm to tf dimension. Note 3: Threaded Flanges shall have a taper pipe thread conforming to ASME B1.20.1 Pipe Refer to ASME B36 - 10 / B36 - 19 or as specified by purchaser No counter bore required on threaded flanges .

RF GORE DIN Swivel flanges Fixed flanges Flange gasket Swivel flanges Fixed flanges Flange gasket. FLANGES DIMENSIONS EN-DIN PN ASTM EN-DIN PN 6 EN-DIN PN 10 EN-DIN PN 16 EN-DIN PN 25 EN-DIN PN 40 ND D K N D2 D K N D2 D K N D2 D K N D2 D K N D2 1/2" 15 80 55 4 11 95 65 4 14 95 65 4 14 95 65 4 14 95 65 4 14

Metallic butterfly valves BS EN 1092-1:2007 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Steel flanges BS EN 1092-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated. Copper alloy flanges BS EN 12516:2005 Series Industrial Valves .

FLANGES AND FITTINGS ISO-KF Flanges and Fittings Easy and reliable ISO-KF Flanges and Fittings allow quick release and tight connections from 10 to 50 mm nominal diameters. With 2 flanges coupled together by a cente-ring ring with a O-ring and a clamp (Fig. 1 & 2), this kind of connection provides many advantages such as: Easy and quick .

SQUARE FLANGES Square Flanges Specifications: JIS B2291 - Socket Welding Pipe Flanges to be used for Pressures of 210 kg/cm² JIS F7806 - Socket Welding Pipe Flanges to be used for Pressures of 280 kg/cm² and 350 kg/cm² Material Specifications: (SF440A) Hydraulic Steel (SS316) Stainless Steel Size Range:

JIS B2291 SQUARE FLANGES Our Brands: Both-Well Pipe Fittings Inteva Quick Couplings, Non Return Check Valves KPL Industry Co., Ltd Compression Fittings, Square Flanges LAME Pipe Fittings MHA-Zentgraf High Pressure Ball Valves Nibco Copper Fittings Oleo Tecnica SAE Flanges Stauff Clamps and Hydraulic Accessories Eaton Walterscheid

CLASS 300 FLANGES ANSI B16.5 FORGED FLANGES 10 Unit : mm Notes: (1) For the ‘Bore’(B1) other than Standard Wall Thickness, refer to page 52. (2) Class 300 flanges except Lap Joint will be furnished with 0.06″(1.6mm)raised face, which is included in ‘Thickness’(t) and ‘Length through Hub’(T1),(T2). (3)For Slip-on, Threaded, Socket Welding an

STAUFF Corperation Call us today 201.444.7800 or visit www.stauff.com CLAMPS TEST FILTRATION DIAGTRONICS ACCESSORIES VALVES FLANGES ACCUMULATORS Flanges stauff.com The STAUFF range of flanges gives you extensive product diversity, whether it is the DIN ISO 6162-1/2 range or SAEJ518 complian

The STAUFF range of flanges gives you extensive product diversity, whether it is the DIN ISO 6162-1/2 range or SAEJ518 compliant SAE flanges, as well as the range of gear pump flanges. The standard pressure series of

Steel Pipe, Buttweld Fittings & Flanges To ASME Standards 8 Bolts & studs for ASME B16.5 Flanges 9 Flange Identification Chart 10-11 Australian Standard Flanges 12 I.S.O. Metric Hexagon Steel Bolts For Use With AS.2129 Flanges 13 Light/Extra Light Pipe To Australian Standards 14 Medium &am

1 ISO-K flanges 2 Vacuum sealing disk consisting of centering ring and O-ring with outer support ring 3 Retaining rings 4 ISO-F collar flanges 5 Bolt with nut ISO-F / DIN Fixed Bolted Flange Fittings With the appropriate collar flanges, the clamp flange can be connected to various fixed bolted flange systems (

Check API Flanges Dimensions, View Our API Flanges Standard Inventory In India, We Have A Complete Range Of API 5000 Rtj Flange & API 6A Integral Flange, API Plate Flanges At Affordable Price, Renown Suppliers Of API 6A Flange Studs And API Type 6b Fl

Lens ring and grayloc flanges Heat exchanger faces Rtj groove flanges Swivel ring flanges Mirage manufacture and sell a range of precision flange facing machines, complete ready to operate, on a wide range of applications including:- Compact flanges and hub profiles Weld preps and seal grooves Flange facing 0 –3000mm (0 –

Nordic Flanges AB manufacture standard and special flanges. We manufacture and distribute flanges, welding necks and welding rings in stainless steel, carbon steel, titanium and different special alloys. Over 40 years of experience has given us a unique know-how and experience of forging and machining. A wide and extensive stock of raw material .

For WTS meters, standard flanges are 150 lb. ANSI drilling. PVC meters can be installed with optional flanges according to pipe manufacturer's recommendations. For PVC a bolt torque of 20-30 ft-lb for 3" and 4" flanges, and 35-50 ft-lb for 6" flanges is recommended. Either partial or full-face gaskets can be used. Tighten the bolts evenly.

Flanges HYDRAULIC SAE FLANGES Hydraulic SAE Flanges Specifications: SAE-J518/ISO 6162, Hydraulic flanged tube, pipe and hose connections, . Metric screws according to DIN 912-10.9 (Optional) SAE Flange Recommended Torque Values Code 61 (Series 3000) Code 62 (Series 6000) Flange Size Recommended Torque Range

the rubber expansion joints. Mating flanges with and without projec-tion according to EN 1092-1:2001 Form A or B must be used for expansi-on joints with rotatable flanges. Only smooth mating flanges should be used for expansion joints with solid flanges. Other types are available on request.

ANSI FLANGES DIMENSIONS . Flanges are commonly used to connect valves into pipework making it easier for removal and maintenance. There are many common flange standards and flanges within the same standard can etiher be flat (commonly cast iron, ductile iron) or raised face (commonly cast steel and stainless steel). Below is a reference table for

JIS B2291 - Socket Welding Pipe Flanges to be used for Pressures of 210 kgf/cm² JIS F7806 - Socket Welding Pipe Flanges to be used for . Metric screws according to DIN 912-8.8 (Standard) SHAB Oring and Flat Square Blind Flanges SSAB . 3 SQUARE FLANGES . DIMENSIONS A B D H I BOLT LENGTH

4 1These flanges are also valid for ductile iron flanges type 21-2 2Flange thicknesses for copper alloy are from BS 450 3Copper alloy flanges are always flat-faced Please Note - All dimensions have been given in millimetres. Where imperial flanges are detailed, the dimensions have been converted to the nearest mm. For measurements in inches, please refer to the Hattersley Flange Tables

JIS B2291, Hydraulic pipe and hose connections, four-bolt Material Specifications: (SF440A) Hydraulic Steel (SS316) Stainless Steel . JIS B2291 SQUARE FLANGES BLIND SQUARE FLANGES SHAB (210 KG/CM²) SIZE ORING PART NUMBER (ORING SIDE) PART NUMBER (FLAT SIDE) DIMENSIONS A B D H I BOLT

Flanges Endress Hauser 3 Overview Specifications The material of the flanges delivered is AISI 316L with the material number 1.4404 or 1.4435. With regard to their stability-temperature property, the material s 1.4404 and 1.4435 are grouped in DIN EN 1092-1 table 18

Used to connect vacuum chambers, tubing and vacuum pumps to each other. Quick release flanges (QF, KF, LF) – up to 10-8 . Torr, 150 C – Flanges are connected by an elastometer ring and held together by a ring clamp. Con-Flat flanges – Knife edged rims inside create grooves on the gasket for the seal. – up to 10-13 . Torr .

LOCK-O-RING Flanges are drilled and faced to match ASME Class 150, 300 or 600 flanges. ASME Class 300 Maximum allowable operating pressure (in psi) per ASME B31.8 at -20 to 100º F Size Approx. Weight Design Factor Inches DN Lbs. Kg. 0.72 0.6 0.5

BS10/BS4504 & SABS 1123 CS,SO,FF,Plate Flanges (HIC) BS10/SABS 1123 Forged,Bossed Flanges (HIC) Backing Rings/Flanges Galvanised (HIC) x EN 1092 Carb

BS 10 : 1962 SABS/SANS 1123 AWWA C228 Italian standard UNI FLANGES Norwegian Standard (NS) Flanges to VSM (Swiss) Standards AS 4087 AS 2129 GOST ASME/ANSI B 16.9 MASS SP-43 ASTM A182/182M ASME SA182/182M ASTM A403/403M JIS G3214 NF

Class 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A ASME B16.5 Flanges Weld Neck, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges are available in all types and pressures. To order

astm a182 flanges ansi b16.5 class 300 stainless steel flanges ansi b16.5 1/16" h x 37.5 y f b1 q o.d 1/16" y x b3 q o.d. r x q f o.d. b2 y 1/16" welding neck lap joint slip-on n pipe size om. flange diameter (o.d.) flange thickness (q) min. (1) hub dia. at base (x) raised face dia. (f) hu

ANSI B16.5 300lb Forged Steel Flanges Material Conforms to ASTM A105 300lb. Threaded Flanges Size - OD" Bolt Boles Dia. Of Holes "C" Thickness "X" Diameter "T" Thread Length "Y" Length Thru Hub Class 300 Item Number Approx Weight Ea. lbs. 1/2" - 3.750"

DIMENSIONS OF SLIP ON FLANGES ANSI 816.5-1988 CLASS 300 Nominal Pipe Size Outisde Diameter of Flange 0 Thickness of Flange (min) Q Diameter of Raised Face R Diameter of Bore J Length . DIMENSIONS OF SLIP ON FLANGES ANSI B16.5-1988 CLASS 600 Nominal Pipe Size Outisde Diameter of Fl

the flanges during multiple bolt-ups. The test was also performed to investigate the ability of one (1) HCS coated washer per nut to maintain electrical isolation. Test Procedure: 6” Class 300# ASME B16.5 carbon steel flanges with a bore diameter of 6” was used for the testing. The flanges

C207 and ANSI B16.1 and B16.42 flanges. Toruseal gaskets may be used with steel pipe flanges in the 14"-54" sizes in some cases. Check AMERICAN for details, or when connecting to any flange configured differently than flanges per AWWA C110 or C115. Bolts and Nuts Size, length and number o

Flanges according to DIN - EN - ASME - JIS - GOST - Supplementary instructions 3 47574-EN-140206 2 Dimensions 2.1 DIN flanges (DIN 2501) d K D b f L Fig. 1: Dimensions - DIN flan

with ISO-KF flanges - Right-angle valves with a nominal width of DN 63 to DN 250 with ISO-K flanges - Gate valves with a nominal width of DN 16 to DN 250 with various flanges - Ball valves - Special valves Bellow Vacuum Housing Valve disk with vacuum seal Valve Type of -stepped rotary knob-electropneum

sizes of blind, target, threaded, weld-neck and adapter flanges. Specialty flanges can also be fabricated to your requirements. . sure control equipment used by drilling contractors and rental companies, world-wide. Our products include new manufactured and remanufactured: API 6A A

MSS-SP-6 MSS-SP-44 MSS-SP-61 MSS-SP-72 MSS-SP-96 NACE MR01-75 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings Steel Pipe Line Flanges Pressure Testing of Steel Valves Flanged or Butt and Weld End Ball Valves Having Full or Reduced Bor

8-13 Flare Fittings, SAE J514 Steel and Stainless Steel Fittings 14 DBS Gaskets, Thread Tape and High pressure Swivels 15 Plastic Plugs for Hydraulic Fittings 16-21 Steel and Stainless Steel SAE Flanges. 3000/6000 psi Split Flanges 22 O-rings and Bolts for Steel and Stainless Steel SAE Flanges. 3000/6000psi 2

Flat gasket dimensional tables for flanges according to Standard ASME B16.21 (ANSI B16.5) Raised Face flanges RF Nominal diameter Øin Rating 150 Rating 300 Rating 400 Rating 600 Rating 900 Rating 1500 1/2" 21,4 47,6

Below is a summary of pressure and temperature options for carbon steel flanges from the ANSI/ASME B16.5 specification and the AWWA C207 specifications at “atmospheric” temperatures (-20 to 100 degrees F). There is a more detailed pressure temperature chart available i