ARCHITECTURAL TESTING, INC. (AN INTERTEK COMPANY)
This is to attest thatARCHITECTURAL TESTING, INC. (AN INTERTEK COMPANY)130 DERRY COURTYORK, PENNSYLVANIA 17406-8405, U.S.A.Testing Laboratory TL-144has met the requirements of AC89, IAS Accreditation Criteria for Testing Laboratories, and has demonstrated compliancewith ISO/IEC Standard 17025:2017, General requirements for the competence of testing and calibration laboratories. Thisorganization is accredited to provide the services specified in the scope of accreditation.Effective Date April 29, 2021President
ARCHITECTURAL TESTING, INC. (AN INTERTEKCOMPANY)www.intertek.com/buildingContact Name Vinu Abraham, P.E.Contact Phone 1-717-764-7700Accredited to ISO/IEC 17025:2017Effective Date April 29, 2021Conformity SpecificationsASTM E329Standard specification for agencies engaged in construction inspection,testing, or special inspection (sections 8-12)ASTM E699Standard specification for agencies involved in testing, quality assurance andevaluating of manufactured building components (part A)AcousticalAAMA 1801Voluntary specification for the acoustical rating of exterior windows, doors,skylights and glazed wall sectionsANSI/ASA S12.51Acoustics – determination of sound power levels and sound energy levels ofnoise sources using sound pressure – precision methods for reverberation testroomsASTM C423Standard test method for sound absorption and sound absorption coefficientsby the reverberation room methodASTM C522Standard test method for airflow resistance of acoustical materialsASTM C635Standard specification for the manufacture, performance, and testing of metalsuspension systems for acoustical tile and lay-in panel ceilingsASTM E90Standard test method for laboratory measurement of airborne soundtransmission loss of building partitions and elementsASTM E336Standard test method for measurement of airborne sound attenuation betweenrooms in buildingsASTM E413Classification for rating sound insulationASTM E492Standard test method for laboratory measurement of impact soundtransmission through floor-ceiling assemblies using the tapping machineStandard test method for laboratory measurement of noise reduction of soundisolating enclosuresASTM E596ASTM E795Standard practices for mounting test specimens during sound absorption testsASTM E966Standard guide for field measurements of airborne sound insulation of buildingfacades and facade elementsASTM E989Standard classification for determination of impact insulation class (IIC)ASTM E1007Standard test method for field measurement of tapping machine impact soundtransmission through floor-ceiling assemblies and associated supportstructuresTL-144ARCHITECTURAL TESTING, INC.(AN INTERTEK COMPANY)Page 2 of 20
ASTM E1050Standard test method for impedance and absorption of acoustical materialsusing a tube, two microphones and a digital frequency analysis systemASTM E1110Standard classification for determination of articulation classASTM E1111/E1111MStandard test method for measuring the interzone attenuation of open officecomponentsStandard test method for laboratory measurement of the insertion loss of pipelagging systemsASTM E1222ASTM E1332Standard classification for rating outdoor-indoor sound attenuationASTM E1414/E1414MStandard test method for airborne sound attenuation between rooms sharing acommon ceiling plenumASTM E1425Standard practice for determining the acoustical performance of windows,doors, skylight, and glazed wall systemsASTM E2179Standard test method for laboratory measurement of the effectiveness of floorcoverings in reducing impact sound transmission through concrete floorsASTM E2235Standard test method for determination of decay rates for use in soundinsulation test methodsASTM E3222Standard Classification for Determination of High-frequency Impact SoundRatingsISO 354Acoustics - Measurement of sound absorption in a reverberation roomAcoustics - Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulationISO 717-1ISO 717-2Acoustics - Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulationISO 3741Acoustics -- determination of sound power levels and sound energy levels ofnoise sources using sound pressure -- precision methods for reverberation testroomsISO 10140-1 Annex KAcoustics -- Laboratory Measurement of Sound Insulation Of BuildingElements; Annex K -- Roofs, roof/ceiling systems, roof windows and skylights Rainfall SoundISO 10140-2Acoustics - Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulationISO 10140-3Acoustics - Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulationISO 10140-5Acoustics - Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipmentISO 15665Acoustics -- acoustic insulation for pipes, valves and flangesCMTASTM C90Standard specification for loadbearing concrete masonry unitsASTM C1019Standard test method for sampling and testing groutASTM C1185Standard test methods for sampling and testing non-asbestos fiber-cement flatsheet, roofing and siding shingles, and clapboardsASTM C1186Standard specification for flat fiber-cement sheetsStandard Test Methods for Emulsified Bitumens Used as Protective Coatings(excluding Section 12)ASTM D2939TL-144ARCHITECTURAL TESTING, INC.(AN INTERTEK COMPANY)Page 3 of 20
ASTM D6904Standard Practice for Resistance to Wind-Driven Rain for Exterior CoatingsApplied on MasonryICC ES AC51Precast stone veneer (test methods referenced in section 4.0)ICC ES AC90Fiber cement siding used as exterior wall siding (test methods referenced insection 4.0)TAS 112Standard requirements for concrete roof tilesEnergy StarENERGY STAR Program Requirements for Exterior and Interior Storm Windows (Version 1.0)ENERGY STAR program requirements for residential windows, doors and skylights – version 5.0NFRC 100: NFRC procedures for U-factorNFRC 200: solar heat gain coefficientSkylight U-Factor criteria using U-factor ratings certified under the NFRC computer simulation procedure(for tubular daylighting devices only)10 CFR Part 431 Subpart R: Walk-in Coolers and Walk-in Freezers, Appendices A and B onlyFireASTM C1166Standard test method for flame propagation of dense and cellular elastomericgaskets and accessoriesASTM D635Standard test method for rate of burning and/or extent and time of burning ofplastics in a horizontal positionASTM D1929Standard test method for determining ignition temperature of plasticsASTM D2843Standard test method for density of smoke from the burning or decompositionof plasticsASTM D3801Standard test method for measuring the comparative burning characteristics ofsolid plastics in a vertical positionStandard test method for determining the flammability characteristics of nonrigid solid plasticsASTM D4804ASTM E84Standard test method for surface burning characteristics of building materialsASTM E108Standard test methods for fire tests of roof coveringsASTM E119Standard test methods for fire tests of building construction and materialsASTM E136Standard test method for behavior of materials in a vertical tube furnace at750 CASTM E603Standard guide for room fire experimentsASTM E814Standard test method for fire tests of penetration firestop systemsASTM E1966Standard test method for fire-resistive joint systemsASTM E2067Standard practice for full-scale oxygen consumption calorimetry fire testsASTM E2226Standard practice for application of hose streamCAN/ULC-S102Standard method of test for surface burning characteristics of buildingmaterials and assembliesICC-ES AC66Acceptance Criteria for Fire Retardant Wood - Test methods referenced inSection 3 and 4 (except Sections 3.1.3 and 3.2.3)NFPA 251Standard methods of tests of fire resistance of building construction andmaterialsNFPA 252Standard methods of fire tests of door assembliesTL-144ARCHITECTURAL TESTING, INC.(AN INTERTEK COMPANY)Page 4 of 20
NFPA 255Standard method of test of surface burning characteristics of building materialsNFPA 256Standard methods of fire tests of roof coveringsNFPA 257Standard on fire test for window and glass block assembliesNFPA 265Standard methods of fire tests for evaluating room fire growth contribution oftextile or expanded vinyl wall coverings on full height panels and wallsNFPA 268Standard Test Method for Determining Ignitability of Exterior Wall Assembliesusing Radian Heat Energy source.NFPA 275Standard method of fire tests for the evaluation of thermal barriersStandard fire test method for evaluation of fire propagation characteristics ofexterior non-load-bearing wall assemblies containing combustible componentsNFPA 285NFPA 286Standard methods of fire tests for evaluating contribution of wall and ceilinginterior finish to room fire growthNFPA 701Standard methods of fire tests for flame propagation of textiles and filmsSFM 12-7A-1Materials and construction methods for exterior wildfire exposure – exteriorwall siding and sheathingSFM 12-7A-2Materials and construction methods for exterior wildfire exposure - exteriorwindowsSFM 12-7A-3Materials and construction methods for exterior wildfire exposure - horizontalprojection undersideSFM 12-7A-4SFM 12-7A-4AMaterials and construction methods for exterior wildfire exposure - deckingMaterials and construction methods for exterior wildfire exposure - deckingalternate method AUL 9Standard for fire tests of window assembliesUL 10BStandard for fire tests of door assembliesUL 10CStandard for positive pressure fire tests of door assembliesUL 263Standard for fire tests of building construction and materialsUL 723Standard for test for surface burning characteristics of building materialsUL 790Standard for standard test methods for fire tests of roof coveringsUL 1715Standard for fire test of interior finish materialUL 1975Standard for fire tests for foamed plastics used for decorative purposesMechanicalAAMA 712Voluntary specification for mechanically attached flexible flashingAAMA 920Specification for operating cycle performance of active side-hinged exteriordoor slabsAISI S905Test methods for mechanically fastened cold-formed steel connections (allsections except 8.2 and 9.2)ANSI/ASSE Z359.18Safety Requirements for Anchorage Connectors for Active Fall ProtectionSystemsANSI/BHMA A156.2Bored & preassembled locks and latchesANSI/BHMA A156.4Door controls-closersANSI/BHMA A156.11Cabinet locksANSI/BHMA A156.12Interconnected locks & latchesANSI/BHMA A156.13Mortise locksTL-144ARCHITECTURAL TESTING, INC.(AN INTERTEK COMPANY)Page 5 of 20
ANSI/BHMA A156.14Sliding and folding hardwareANSI/BHMA A156.15Release devicesANSI/BHMA A156.17Self closing hingesANSI/BHMA A156.19Power assist & low energy power operated doorsANSI/BHMA A156.23Electromagnetic locksANSI/BHMA A156.24Delayed egress locksANSI/BHMA A156.31Electric strikes and frame mounted actuatorsANSI/BHMA A156.32Integrated door opening assembliesANSI/BHMA A156.36Auxiliary locksASTM A370Standard test methods and definitions for mechanical testing of steel products(sections 5 through 13)ASTM C39Standard Test Method for Compressive Strength of Cylindrical ConcreteSpecimensStandard Test Methods for Sampling and Testing Brick and Structural ClayTileASTM C67ASTM C143Standard Test Method for Slump of Hydraulic-Cement ConcreteASTM C170/C170MStandard test method for compressive strength of dimension stoneASTM C173Standard Test Method for Air Content of Freshly Mixed Concrete by theVolume MethodASTM C270Standard Specification for Mortar for Unit MasonryASTM C348Standard test method for flexural strength of hydraulic-cement mortarsASTM C469/C469MStandard test method for static modulus of elasticity and Poisson’s ratio ofconcrete in compressionASTM C495/C495MStandard test method for compressive strength of lightweight insulatingconcreteASTM C496/C496MStandard test method for splitting tensile strength of cylindrical concretespecimensStandard specification for mixing rooms, moist cabinets, moist rooms, andwater storage tanks used in the testing of hydraulic cements and concretesASTM C511ASTM C880/C880MStandard test method for flexural strength of dimension stoneASTM C1064Standard Test Method for Temperature of Freshly Mixed Hydraulic-CementConcreteASTM C1314Standard test method for compressive strength of masonry prismsASTM C1353/C1353MStandard test method for abrasion resistance of dimension stone subjected tofoot traffic using a rotary platform abraserASTM C1609/C1609MStandard test method for flexural performance of fiber-reinforced concrete(using beam with third-point loading)ASTM D953Standard Test Method for Bearing Strength of PlasticsASTM D1400Standard test method for nondestructive measurement of dry film thickness ofnonconductive coatings applied to a nonferrous metal baseASTM D4761Standard test methods for mechanical properties of lumber and wood-basestructural materialTL-144ARCHITECTURAL TESTING, INC.(AN INTERTEK COMPANY)Page 6 of 20
ASTM D5035Standard test method for breaking force and elongation of textile fabrics (stripmethod)ASTM D6132Standard test method for nondestructive measurement of dry film thickness ofapplied organic coatings using an ultrasonic coating thickness gageStandard guide for evaluating mechanical and physical properties of woodplastic composite productsASTM D7031ASTM D7091Standard practice for nondestructive measurement of dry film thickness ofnonmagnetic coatings applied to ferrous metals and nonmagnetic,nonconductive coatings applied to non-ferrous metalsASTM E2649Standard test method for determining argon concentration in sealed insulatingglass units using spark emission spectroscopyASTM F606/F606MStandard test methods for determining the mechanical properties of externallyand internally threaded fasteners, washers, direct tension indicators, and rivetsASTM F1575Standard Test Method for Determining Bending Yield Moment of NailsASTM F2090Standard specification for window fall prevention devices with emergencyescape (egress) release mechanismsICC ES AC132Attic Vents (test methods referenced in section 4.0)ICC ES AC364ICC ES AC365Mechanically operated flood vents (test methods referenced in section 3.0)Building integrated photovoltaic roof modules (test methods referenced insection 4.0 (except UL 1703))UL 608Standard for emergency vault ventilators and vault-ventilating portsPhysicalAAMA 101Standard/specification for windows, doors, and skylightsAAMA 711Specification for self-adhering flashing for exterior wall fenestration installationAAMA 925Specification for determining the vertical loading resistance of side-hingeddoor leavesAAMA 1304Voluntary specification for forced entry resistance of side-hinged door systemsAATCC 127Water resistance - hydrostatic pressure testABNT NBR 10821-3Exterior door and window frames for buildings Part 3: Test methodsANSI/BHMA A156.1Butts and hingesANSI/BHMA A156.3Exit devicesANSI/BHMA A156.5Cylinders and input devices for locksANSI/BHMA A156.6Architectural door trimANSI/BHMA A156.8Overhead stops & holdersANSI/BHMA A156.9Cabinet hardwareANSI/BHMA A156.16Auxiliary hardwareANSI/BHMA A156.18Materials and finishesANSI/BHMA A156.20Strap and tee hinges, and haspsANSI/BHMA A156.21ThresholdsANSI/BHMA A156.26Continuous hingesAS 4586Slip Resistance Classification of New Pedestrian Surface Materials. (ExcludingAppendices B, C and D)TL-144ARCHITECTURAL TESTING, INC.(AN INTERTEK COMPANY)Page 7 of 20
ASTM A90/A90MStandard test method for weight [mass] of coating on iron and steel articleswith zinc or zinc-alloy coatingsASTM B117Standard practice for operating salt spray (fog) apparatusASTM B499Standard test method for measurement of coating thicknesses by the magneticmethod: nonmagnetic coatings on magnetic basis metalsStandard test methods for absorption and bulk specific gravity of dimensionstoneASTM C97/C97MASTM C99/C99MStandard test method for modulus of rupture of dimension stoneASTM C109/C109MStandard test method for compressive strength of hydraulic cement mortars(using 2-in. or [50-mm] cube specimens)ASTM C140/C140MStandard test methods for sampling and testing concrete masonry units andrelated unitsASTM C203Standard test methods for breaking load and flexural properties of block-typethermal insulationASTM C209Standard test methods for cellulosic fiber insulating board (sections 13 and 14)ASTM C297/C297MStandard test method for flatwise tensile strength of sandwich constructionsASTM C303Standard test method for dimensions and density of preformed block andboard–type thermal insulationASTM C393/C393MStandard test method for core shear properties of sandwich constructions bybeam flexureStandard Test Methods for Physical Testing of Gypsum, Gypsum Plasters andGypsum ConcreteASTM C472ASTM C473Standard test methods for physical testing of gypsum panel productsASTM C474Standard Test Methods for Joint Treatment Materials for Gypsum BoardConstructionASTM C550Standard test method for measuring trueness and squareness of rigid blockand board thermal insulationASTM C567/C567MStandard test method for determining density of structural lightweight concreteASTM C645Standard specification for nonstructural steel framing membersASTM C661Standard test method for indentation hardness of elastomeric-type sealants bymeans of a durometerASTM C666/C666MStandard test method for resistance of concrete to rapid freezing and thawingASTM C672/C672MStandard test method for scaling resistance of concrete surfaces exposed todeicing chemicals (section 9 only)Standard test method for adhesion and cohesion of elastomeric joint sealantsunder cyclic movement (Hockman cycle)ASTM C719ASTM C864Standard specification for dense elastomeric compression seal gaskets,setting blocks, and spacersASTM C1021Standard practice for laboratories engaged in testing of building sealants (forperformance of ASTM C661 and ASTM C719)ASTM C1289Standard specification for faced rigid cellular polyisocyanurate thermalinsulation boardASTM C1305Standard test method for crack bridging ability of liquid-applied waterproofingmembraneTL-144ARCHITECTURAL TESTING, INC.(AN INTERTEK COMPANY)Page 8 of 20
ASTM C1354/C1354MStandard test method for strength of individual stone anchorages in dimensionstoneASTM C1401Standard guide for structural sealant glazingASTM C1521Standard practice for evaluating adhesion of installed weatherproofing sealantjointsStandard test method for extensibility after heat aging of cold liquid-appliedelastomeric waterproofing membranesASTM C1522ASTM C1523Standard test method for determining modulus, tear and adhesion propertiesof precured elastomeric joint sealantsASTM D95Standard Test Method for Water in Petroleum Products and BituminousMaterials by DistillationASTM D143Standard test methods for small clear specimens of timberASTM D198Standard test methods of static tests of lumber in structural sizesASTM D256Standard test methods for determining the Izod pendulum impact resistance ofplasticsASTM D395Standard test methods for rubber property—compression setASTM D412Standard test methods for vulcanized rubber and thermoplastic elastomers—tensionASTM D471Standard test method for rubber property—effect of liquidsASTM D522/D522MStandard test methods for mandrel bend test of attached organic coatingsASTM D570Standard test method for water absorption of plasticsASTM D610Standard Practice for Evaluating Degree of Rusting on Painted Steel SurfacesASTM D618ASTM D624Standard practice for conditioning plastics for testingStandard test method for tear strength of conventional vulcanized rubber andthermoplastic elastomersASTM D638Standard test method for tensile properties of plasticsASTM D695Standard test method for compressive properties of rigid plasticsASTM D746Standard test method for brittleness temperature of plastics and elastomers byimpactASTM D751Standard test methods for coated fabricsASTM D790Standard test methods for flexural properties of unreinforced and reinforcedplastics and electrical insulati
ARCHITECTURAL TESTING, INC. (AN INTERTEK COMPANY) 130 DERRY COURT . YORK, PENNSYLVANIA 17406-8405, U.S.A. Testing Laboratory TL-144 . has met the requirements of AC89, IAS Accreditation Criteria for Testi
1] Intertek is a brand name representing the Intertek Group plc legal entities, including but not limited to, Intertek Testing Services NA Inc., Professional Service Industries, Inc. (“INTERTEK‐PSI”), Architectural Testing Inc. (“INTERTEK‐ ATI”), and MT Grou
Apr 25, 2018 · 1] Intertek is a brand name representing the Intertek Group plc legal entities, including but not limited to, Intertek Testing Services NA Inc., Professional Service Industries, Inc. (“INTERTEK‐PSI”), Architectural Testing Inc. (“INTERTEK‐ ATI”), and MT Grou
(Jeffrey.Fullerton@intertek.com or Alexander.Maurer@Intertek.com) or phone (857‐523‐6576 or 603‐ 560‐4614) should you have any questions or require further information. Sincerely, Architectural Testing, Inc., an Intertek company Jeff
Intertek/ATI (QUA1844) Quality Assurance Inspection Report 05/28/2020 Intertek/ATI (QUA1844) Quality Assurance Florida BCIS Current 4. PRODUCT DESCRIPTION: Product Material Standard Plant(s) . Architectural Testing, Inc., and Intertek Company – QUA1844; (84
to a Chinese company called Reecon M&E Co., Ltd. that would manufacture the Thermablasters. Reecon, in turn, suggested that Brand use Intertek to test the heaters to ensure they met U.S. safety standards. Intertek, an international product-testing company with more than 35,000 employees,
Project Summary: Architectural Testing, Inc., an Intertek company, ("Intertek-ATI"), was contracted by NAAMM to evaluate the load performance of their metal bar gratings. Test Methods: The test specimens were evaluated in accordance with Load Test Procedures for MGB 531 Grating T
5541 Central Ave., Ste. 110 Boulder, CO 80301 Email: Bryant.hart@intertek.com www.intertek.com Intertek is a global leader in testing, inspection, and certification services, which o
PGT Commerce HOD Commerce Professor, Department of Commercial Senior East Point School KMPG, Badalpur Social Sciences & Humanities Secondary School, Delhi NCERT, New Delhi 16 Daryaganj, New Delhi Dr. Piyush Prasad Dr. Neha Agarwal Sh. Sanjeev Kumar Smt. Alka Rani Dr. Amit Agarwal Academic Officer Financial Expert V ice Principal PGT, Commerce Lecturer (Accountancy) GAIL Town Ship Govt. Co-edu .
