ARREL HINGES HEAVY DUTY - Topper Industries

products@topperfloats.comToll Free: 800-332-3625Phone: 360-841-8320PO Box 2050 Woodland, WA 98674BARREL HINGES HEAVY DUTYH702FFemale Half, 2 BarrelsH702MMale Half, 2 BarrelsH702PPair with PinH756L4Four Barrel UHMW, Sleeved SteelHinge PinB704Inside Hinge Back PlateTopper Industries pioneered this time proven hinge design in the early 70’s to hinge docksin the heavy weather conditions encountered in Puget Sound and Alaska. The hinge pinhas a large surface area, eight inches long, which reduces wear and maintenance. TheUHMW bushed hinge pin is quieter than steel hinge designs. Used in conjunction with thematching back plate, this unit is nearly indestructible. The wrap-around design ties thecorners of the dock together in a strong, functional joint. This hinge requires a lumber endcap on the deck.All steel meets ASTM A36.The hot dip galvanizing meets ASTM A123.All welding meets AWS D1.1.Bolt holes are punched for 1/2 ” bolts. Larger holes can be ordered.The pins are ASTM A307 3/4” blank bolts, bushed to 1-1/4” with UHMWThe hinge size is nominally 6”x14”x17”The matching back plate is punched to fit 4X lumberThe H756L4 pin is used with H702 hinges.H702F & H702M15 lbs. eachH702P32 lbs.H756L41.5 lbs.B70411 lbs.

products@topperfloats.comToll Free: 800-332-3625Phone: 360-841-8320PO Box 2050 Woodland, WA 98674FLAT FACE HINGES HEAVY DUTYH706PPair Male/Female & PinH706FFemale, 2 BarrelH706MMale, 1 BarrelH756L33 Barrel UHMW Hinge PinH756L44 Barrel UHMW Hinge PinB708Inside Hinge Back PlateThis hinge is fully compatible with all Topper Heavy-Duty Barrel Hinge designs. Used inconjunction with the heavy duty corner barrel hinge, this unit is used where the dockconfiguration forms a hinged “T” or “L”. The optional back plate can be added to provideadditional strength.All steel meets ASTM A36.The hot dip galvanizing meets ASTM A123.All welding meets AWS D1.1.Bolt holes are punched for 1/2 ” bolts. Larger holes can be ordered.The pins are ASTM A307 3/4” bolts, bushed to 1-1/4” with UHMWThe hinge size is nominally ¼” x 6” x6-1/2”.H706P8.25lbs.H706F4.00 lbs.H706M3.25 lbs.H756L31.00 lbs.H756L41.50 lbs.B7082.50 lbs.

products@topperfloats.comToll Free: 800-332-3625Phone: 360-841-8320PO Box 2050 Woodland, WA 98674CORNER ANGLESB705Outside CornerB704Inside Back PlateThis angle can be used in a variety of applications. It can be used on new construction toreinforce areas of heavy stress, or to upgrade existing dock systems. The legs are longenough to allow 4 bolts in each leg, spreading the attachment load over a larger surfacearea. For more strength, malleable washers or the B704 back plate can be used.*Please specify member size, and include drawings of your project when you order.TECHNICAL:All steel meets ASTM A36.The hot dip galvanizing meets ASTM A123.Bolt holes are punched for 1/2 ” bolts. Larger holes can be ordered.The matching back plate (B704) is punched to fit 4X lumber.NOMINAL SHIPPING WEIGHT:B705 14.5 lbs.B704 11.0 lbs.

products@topperfloats.comToll Free: 800-332-3625Phone: 360-841-8320PO Box 2050 Woodland, WA 98674DOCK REINFORCING ANGLESD7315” High Standard AngleD7328” High Standard AngleD7343” High Clip AngleThese angles can be used when the 90 degree corners require bolted steel reinforcement.The height of the angle corresponds to the height of the structural members which are being attached. These easy-to-install angles can add rigidity to any dock system, whetherfixed or floating. They can be an inexpensive solution for adding years to an older existingsystem.TECHNICAL:All steel meets ASTM A36.The hot dip galvanizing meets ASTM A123.Bolt holes are punched for 1/2 ” bolts. Larger holes can be special ordered.NOMINAL SIZE AND SHIPPING WEIGHT:SizeWeightD7311/4”x 3-1/2”x 5”x 5”3.5 lbs.D7321/4”x 3-1/2”x 5x 8”4.0 lbs.D7341/4” x 3”x 3” x 3”1.0 lbs.

products@topperfloats.comToll Free: 800-332-3625Phone: 360-841-8320PO Box 2050 Woodland, WA 98674FILLET ANGLESD748 Standard Weight Fillet AnglesD749 Light Weight Fillet Angles(D749 Custom Order)Many dock designs use a triangular area between the finger walk and the finger, called a“fillet”, that requires a reinforced connection. The fillet angle provides a bolted steel connection that attaches and stabilizes the fingers. Topper Industries offers two sizes tomatch your environmental conditions. The most common angles are 30, 45 and 60 degrees.TECHNICAL:All steel meets ASTM A36.The hot dip galvanizing meets ASTM A123.Bolt holes are punched for 1/2 ” bolts. Larger holes can be special ordered.Specify angle size.NOMINAL SIZE AND SHIPPING WEIGHT:SizeWeightD7481/4”X6”X12”X12”10 lbs.D7493/16”X6”X3”X5”3 lbs. (custom order)

products@topperfloats.comToll Free: 800-332-3625Phone: 360-841-8320PO Box 2050 Woodland, WA 98674INTERNAL BRACE ANGLED718 Internal, Center StringerD719 Internal, Outside WaleInternal brace angles, “spiders”, are designed for heavy duty systems where internal structuralmembers must be tied together with bolted steel plates. The combination of “spiders” andtimber or glue laminated beams create a tremendously strong floating dock system built tostand up to the toughest storms. In combination with other Topper hardware each timber totimber connection in a dock can be connected with steel members. Topper has standardizedthese parts or can supply custom size or shapes.TECHNICAL:All steel meets ASTM A36.The hot dip galvanizing meets ASTM A123.All welding meets AWS D1.1.Bolt holes are punched for 1/2 ” bolts. Larger holes can be ordered.Inside and outside plates are punched to match 4X members.*Please specify member size, and include drawings of your project when you order.NOMINAL SIZE AND SHIPPING WEIGHT:D7189.5 lbs.D71911.0 lbs.

products@topperfloats.comToll Free: 800-332-3625Phone: 360-841-8320PO Box 2050 Woodland, WA 98674PILE RETAINERSPipe -182”18”P714-202”20”Topper Pile Rings are designed to effectively hold floating structures in position regardless ofweather and environmental conditions. They are constructed from 1-1/4”; 1-1/2” or 2”schedule 40 pipe, giving the customers many sizes to choose from. Because the rings areavailable in a variety of sizes and strengths they will accommodate a wide range of applications. The two large 6” x 6” x 1/4” mounting plates allow the pile rings to be easily installedon both new and existing docks.A UHMW wear plate (catalog no. W715) or a pile roller (catalog no. P720) is compatible withthese rings.TECHNICAL:The pipe is 1-1/4”, 1-1/2” or 2” diameter ASTM A36 schedule 40.All rings are hot dip galvanized and meet ASTM A123.Fastener holes are punched 9/16” to accommodate 1/2” fasteners.Larger holes sizes are available on request.NOMINAL SIZE AND SHIPPING WEIGHT:P712-1417 lbs.P712-1820 lbs.P714-1822 lbs.P712-1618 lbs.P712-2224 lbs.P714-2024 lbs.

products@topperfloats.comToll Free: 800-332-3625Phone: 360-841-8320PO Box 2050 Woodland, WA 98674REMOVABLE PILE RETAINERSPipe Size Width/LengthP713-14/181-1/4”14”& 18”P713-15/18/221-1/2”15”&18”& 22”P713-17/212”17” & 21”These retainers function the same as the standard Topper Pile Retainers, but are designed sothe retainer can be removed from the mounting feet to facilitate dock relocation. This is accomplished by a bolted slip fitting that does not detract from the structural integrity of theunit.A UHMW wear plate (catalog no. W715) or a pile roller (catalog no. P720) is compatible withthese rings.TECHNICAL:The pipe is 1-1/4”, 1-1/2” or 2” diameter ASTM A36 schedule 40 pipe.All rings are hot dip galvanized and meet ASTM A123.Fastener holes are punched 9/16” to accommodate 1/2 ” fasteners.Larger holes sizes are available on request.NOMINAL SIZE AND SHIPPING WEIGHT:P713-14/1817 lbs./21 lbs.P713-15/18/2218 lbs./21 lbs./25 lbs.P713-17/2121 lbs./25 lbs.

products@topperfloats.comToll Free: 800-332-3625Phone: 360-841-8320PO Box 2050 Woodland, WA 98674PILE WEAR PLATESW715UHMW Pile Wear PlatesThese UHMW plates can be used on new construction or for upgrading existing systems toprovide a wear surface for internal pile retainers, where rings or rollers are not appropriate.They can be used with pile retainers to prevent wear on the dock. The UHMW wear platesare mounted to the side of the dock to eliminate premature failure of structural members dueto abrasion caused by rubbing on the piling.TECHNICAL:Size 3/4” x 4” x 14”Fastener hole size is 3/8” with a 1-1/8” countersink.NOMINAL SIZE AND SHIPPING WEIGHT:W7152 lbs.

products@topperfloats.comToll Free: 800-332-3625Phone: 360-841-8320PO Box 2050 Woodland, WA 98674PILE ROLLERP720SPile Rollerome pile retaining applications require rollers to reduce the sliding friction on the piling. Thisis particularly important on concrete pile to reduce wear. Pile rollers will also eliminate thenoise of metal banging on steel. Using a space age ultra high molecular weight polyethylene(UHMW-PE) plastic for the roller and galvanized steel for the mounting bracket, Topper Industries has designed this unit to mount between the dock and the piling, or to bolt through thedeck surface.TECHNICAL:The roller is machined from UHMW-PE.The roller bracket is fabricated A36 steel, and is hot dip galvanized after fabrication.The galvanizing meets ASTM A1213.The roller axle bolt meets ASTM A307.NOMINAL SIZE AND SHIPPING WEIGHT:P7206.5 lbs.Roller is 3” in diameter and 4-1/2” long

products@topperfloats.comToll Free: 800-332-3625Phone: 360-841-8320PO Box 2050 Woodland, WA 98674SQUARE PILE RETAINERP- 725-163” Channel 16” x 16”Lined with UHMWFits a 12”-16” pileOther sizes available upon requestTopper Square Pile Retainers are designed to effectively hold floating structures in position regardless of weather and environmental conditions. Designed for steel or concretepile, they are constructed from 3” Channel, the 16” size allows for 12”-16” diameter pile.Retainers are available in a variety of sizes and strengths that will accommodate a widerange of applications. The two large 6” x 6” x 1/4” mounting plates allow the pile rings tobe easily installed on both new and existing docks.A UHMW wear plate (catalog no. W715) lines the inside of the retainer to minimize wearon your piling.Custom sizes available.TECHNICAL:The frame is 3” ‘C’ Channel ASTM A36.All rings are hot dip galvanized and meet ASTM A123.Fastener holes are punched 9/16” to accommodate 1/2 ” fasteners.Larger holes sizes are available on request.NOMINAL SIZE AND SHIPPING WEIGHT:Approx. 30 lbs

products@topperfloats.comToll Free: 800-332-3625Phone: 360-841-8320PO Box 2050 Woodland, WA 98674MOORING SPUDS & BRACKETSD760-SSide Mount BracketD760-CCorner Mount BracketD760-103” x 10’ SpudD760-153” x 15’ SpudD760-203” x 21’ SpudSpuds are a successful mooring method in shallow water areas that have a soft mud or sandbottom. They have the advantage of being removable and can be installed without a piledriver. The spud brackets can be mounted on the side or corner of a new or existingfloating dock. Once the bracket is in place and the dock is in the right location the appropriatelength spud can be dropped through the bracket to moor the dock in place.TECHNICAL:All steel meets ASTM A36.All pipe meets ASTM A53.The hot dip galvanizing meets ASTM A123.All welding meets AWS D1.1.Bolt holes are punched for 1/2 ” bolts. Larger holes can be ordered.The spuds are 3” schedule 40 pipe and are not galvanizedNOMINAL SHIPPING WEIGHT:SizeWeightD760-S4” pipe50 lbs.D760-C4” pipe50 lbs.D760-103”x10.5’80 lbs.D760-153”x15’116 lbs.D760-203”x21’160 lbs.