1201 Hiossen ET III SA & Prosthetic Brochure:Layout

ET III SAImplant System &ProstheticComponentsET III SA Implant

SA surfaceSA SurfaceSA SurfaceSA : Sand blasted and Acid etched surface Optimal morphology : Combination of crater and micro-pit Early cell response : 20% faster than RBM Early bone healing : 20% faster than RBM Early loading possible after 6 weeks of placement.HIOSSEN SA surface morphology and roughness increased by 45% compared to RBM treatment.RBMx 2Kx 2Kx 4Kx 4KSASEM (Scanning Electron Microscope) image2ET III SA Implant System Catalog & Manual

ET III SA ImplantET III SA implantET III SA implant, developed with extensive R&D experiences of Hiossen Implant, features an SA surfacetreatment that fully exploits the excellent pluri-potential capacity of osteoblastic cells. It shortens thebone healing time, and improves the secondary attachment force. In addition, SA surface is adopted tohave a convenient placement and initial stability due to its optimal body design.Open Thread Prevents bone necrosisSingle Pitch Thread Optimized design for SA surface Reinforce fixture strengthCorkscrew Thread Powerful self threadingHelix Cutting Edge Keep implant path Easy to change the path Powerful self threading High initial stability Easy path change Decrease sensitivity on drill sizeApical design Self drilling ability Increased initial stability at freshextraction socketHiossenAbutmentsTaper KIT,Taper Mini KITET III SA Implant3

ET III SA ImplantET III SA Fixture Line UpET III SA Fixture can be specified by four different diameters (3.5, 4.0, 4.5 and 5.0mm), and by packaging forNo-mount fixture and Pre-mounted fixture (Fixture Mount Cover screw).Pre-mounted Fixture (Simple Mount)Fixture Mount Cover Screw : A Product Code (Ex:AET3R4011S)ET III SA Fixture 3.5(Yellow/Purple)ET III SA Fixture 4.0/4.5/5.0(Green/Green)NoMount Fixture*Fixture : Cover Screw : C Product Code (Ex:CET3R4011S)* Not available until March 2011.Ø 3.7Ø 4.2Ø 2.5Ø 4.6Ø 2.83.5Ø 3.14.0The following labeled dimension may differ from the actual dimension.4ET III SA Implant System Catalog & ManualØ 5.1For moreinformation,please contactyour salesrepresentative.Ø 3.74.55.0

ET III SA ImplantET III SA Fixture Line UpM* The following labeled dimension may differ from the actual dimension.ConnectionSMiniConnectionDiameter 3R4013S15ET3R4015S15ConnectionDiameter tionDL1011.513Ø4.515Diameter onnectionDiameter 0ET3R5010S11.5ET3R5011S13ET3R5013S15ET3R5015S15ET III SA Implant5

ET III SA ImplantET III SA Fixture Line UpET III SA Fixture has two types of abutment connection specifications: one is the Mini Connection for the Ø3.5fixture, and the other is the Standard Connection for other diameters. The Mini Connection must be used withseparate abutment; in contrast, the Standard Connection can be used with the same abutment for fixtures morethan Ø4.0 regardless of the diameter.Mini (3.5)Cover ScrewStandard SØ4.0, Ø4.5, Ø5.0ETCSMLETCSRSETCSRLPacking unit: Cover ScrewUse a long cover screw when fixture implanted under the bone level1.2 Hex Driver usedTightening torque: 5 8Ncm2.0mm0.4mmMini connection6ET III SA Implant System Catalog & ManualStandard connection

ET III SA ImplantET III SA Packing SystemET SystemMini : YellowStandard : GreenNew Ampoule User's Guide- Applying: Grip type ampoule to protect ET III SA surface1. Remove the back of blister(sterilized condition is notguaranteed once the blisteris removed).2. Remove the Capsule byrotating3. Connect Driver; clicks whenproperly connected4. Remove Fixture from gripholdingET III SA Implant7

Healing M4505MØ5.55503MHDØ4.5Ø5.5H4507M5506M (C:3.0, H:6.0) Order code : HGHLA item codeex) HGHLA 4503M HGHLA4503MCFixture S7507SDØ4.51.07.0 Maintains tissue opening for establishing proper emergence profile Use the 1.2 hex driver Tightening torque : 5 8NcmSlim1.21.21.2SlimH(Mini)Ø4.0StandardFixture LevelH(Standard)MiniFixture Level8ET III SA Implant System Catalog & 006 Order code : HGHLA item codeex) HGHLA 4002 HGHLA4002 Slim abutment, special-purpose Healing abutment Use the 1.2 hex driver Tightening torque : 5 8Ncm

ET & HG Prosthetic componentsRigid Abutment ComponentsRigid abutmentCement retained restorationMiniHØ4.0D4.0HG/HFixture 04047MP4547MPØ4.5DHG/HFixture Level4.05.57.0 Order code : HGRGA item codeex) HGRGA 4014MP HGRGA4014MP Use for making general cement-type prosthesis Abutment and screw in one 11 taper connection for excellent safety Gingival gold color for aesthetic effect Cross-section design for the prevention of prosthesis rotation Ø4.0 : use the outer driverØ4.5, Ø5.0, Ø6.0 : use the outer driver and 1.2 hex driverØ7.0 : Use the 1.2 hex driver Tightening torque : 30Ncm※ Includes Protect cap※ Protect cap can be purchased separatelyET III SA Implant9

Rigid abutmentCement retained restorationStandardDHØ4.0H4.0G/HFixture Level4.05.57.05.5DØ4.5HG/H7.0Fixture --5057SPD7.0Ø5.04.0Ø4.0G/HET III SA Implant System Catalog & 7SP-2.06027SP-3.06037SP-4.06047SP-5.06057SP-G/HD Order code : HGRGA item codeex) HGRGA 4014SP HGRGA4014SP

ET & HG Prosthetic componentsRigid protect capMini / 4S6004S-5.55005S6005S7005S7.05007S6007S-H Order code : HGRPC item codeex) HGRPC 4004 HGRPC4004 Use for the protection of the rigid abutment on the oral cavity and tominimize the patient’s discomfort Applicable as a substructure of temporary prosthesis Convenient lockingRigid impression copingMini / 5SS6005SS7005SS7.0(Blue)5007SS6007SS-HØ7.0 Order code : HGRIC item codeex) HGRIC 4004S HGRIC4004S Use for taking an impression of Rigid abutments Color indication enables the easy identification of abutments ofvaryinglengths - 4mm(Yellow), 5.5mm(Gray), 7.0mm(Blue) Convenient lockingET III SA Implant11

Rigid burn-out cylinderMini / SS60SS70SSBridge50SB60SB70SB Order code : HGRBC item codeex) HGRBC 40S HGRBC40S Use as a prosthetic framework by connecting to Rigid lab analogs Color indication facilitates the identification of different casesSingle (red color), Bridge (white color) After prosthetic casting, the margin may be adjusted by a specialpurpose reamera. Snapped on the shoulder due to the burnout cylinder’s elasticity before castingb. Unfit due to metal inelasticity aftercastingc. Fit after reaming using a reamerRigid lab analogMini / lue)5007S6007S-HH : 4.0H : 5.5H : 7.0 Order code : HGRLA item codeex) HGRLA 4004 HGRLA4004 Make Rigid abutment on a working model Color indication enables the easy identification of abutments ofvaryinglengths - 4mm(yellow), 5.5mm(gray), 7.0mm(blue)12ET III SA Implant System Catalog & Manual

ET & HG Prosthetic componentsTransfer Abutment ComponentsTransfer abutmentCement retained restorationMini1.2HDØ4.5TypeG/HHG/H5.5Fixture LevelHexNon-Hex1.2HDØ5.0HG/H5.5Fixture W5045MNW5.0--TypeG/H Order code : HGTFA item codeex) HGTFA 4515MHW HGTFA4515MHW Use for making general cement-type prosthesis 11 taper connection for excellent safety Gingival gold color for aesthetic effect Cross-section design for the prevention of prosthesis rotation Use the 1.2 hex driver Tightening torque: 20Ncm (mini), 30Ncm (standard)※※Includes EbonyGold abutment screwEbonyGold abutment screw can be purchased separately (Mini :HGATSM, Standard : HGATSS)ET III SA Implant13

Transfer abutmentCement retained restorationStandardH1.2Ø4.5DH5.5G/HFixture 047SHW5047SNW5.05057SHW5057SNW4.0DFixture LevelHexHex1.0Hex1.2Ø5.0Ø4.5DG/HNon-Hex5.57.0 Order code : HGTFA item codeex) HGTFA 4515SHW HGTFA4515SHW14ET III SA Implant System Catalog & Manual

ET & HG Prosthetic componentsTransfer abutmentCement retained 7055SNW Order code : HGTFA item codeex) HGTFA 6014SHW HGTFA6014SHWET III SA Implant15

Fixture lab analogMiniStandardCodeMiniSandardHGFLAMHGFLAS Replicates the implant for use by the dental laboratory Locked to impression coping after the impression has been takenand fixed to the working modelBite indexMiniStandardDLDLFixture LevelNot available until SS Order code : HGBTI item codeex) HGBTI 4504MS HGBTI4504MS Use to take a bite at fixture level impression After final impression, taking the bite with connecting it to oral Use the 1.2 hex driver※ Includes two Bite indexes per packing unitBite index characteristics1 2mm161. The hospital visits are decreased for the patients by easily and exactly registering the bite right afterimpression taking.2. Extra jig fabrication is unnecessary by using a reusable bite exclusive component.3. Easy and rapid connection possible free from limitations of the gingival tissue.4. Applicable to various oral environments of patients with 4, 6, 8, 10, 12 mm features.ET III SA Implant System Catalog & Manual

ET & HG Prosthetic componentsFixture pick-up impression ex4015MHNon-Hex4015MNFixture LevelDL : 11L : 15StandardLH1115LDL : 11L : SN5015SN6015SN Order code : HGFPI item codeex) HGFPI 4011MH HGFPI4011MH Pick-up type for taking an impression using a customized tray Impression coping designed with Hole-in-one ; no need for resinfixation) Asymmetrical structure minimizing contact interference ( Long and short types enhance convenience.※※Includes pick-up coping and guide pinGuide pin can be purchased separatelyFixture pick-up impression copingYou can take an exact impression even when the conventional patternresin connecting procedure is omitted since the fixture pick-up impressioncoping has a hole () structure that allows stable impression materialfixation in the rotation/vertical direction. We overcame the interferencecaused by upper part asymmetry () and interference between trayand opposing tooth.You should be careful to align the coping parallel to the ridge in free endcases to prevent the interference with the tray.Fixation by the holeET III SA Implant17

Fixture pick-up guide pinMiniStandardGuide pin helght1118ET III SA Implant System Catalog & ManualL15MiniDLGuidePin (H)GuidePin SL0.505ML*05SL* Order code : HGFPG item codeex) HGFPG 00M HGFPG00M Use the 1.2 hex driver * Order packageØ6.0

ET & HG Prosthetic componentsFixture transfer impression copingMiniL11L14Fixture Hex4014MNDHexNon-HexHexL : 11Non-HexL : 14StandardL11L14DHexNon-HexL : 11HexNon-HexL : SN5014SN6014SN Order code : HGFTI item codeex) HGFTI 4011MH HGFTI4011MH Transfer type for taking an impression using a ready-made tray) design improves markability following Triangular arc (impression Long and short types enhance convenience The hex type is designed as a two-piece, and the non-hex type, as aone-piece※※Includes transfer coping and guide pinCannot be sold guide pin onlyFixture transfer impression copingRegistered triangle-circleThe fixture transfer impression coping allows easy and exact coping repositioning after impression taking by using thetriangle-circle structure () for superior direction and position identification. And also the long/ short (12.5mm /9.5mm) twofeatures overcome path and intermaxillary interference. The vertical impression error can be prevented by blocking out thedriver hex hole after connecting the coping.ET III SA Implant19

Temporary 401MNTHex403MHTNon-Hex403MNTG/HFixture 3SNT Order code : HGTPA item codeex) HGTPA 401MHT HGFPA401MHT Use to make temporary prosthesis (material : Ti Gr-3) Easy to customize ; designed to minimize indication constraints Use the 1.2 hex driver Tightening torque : 20Ncm (mini / standard)Includes TiN abutment screwTiN abutment screw can be purchased separately(Mini : HGATSMT, Standard : HGATSST)※※20ET III SA Implant System Catalog & Manual