SMP - Cristek Interconnects, Inc.

2y ago
44 Views
2 Downloads
1.24 MB
28 Pages
Last View : Today
Last Download : 2m ago
Upload by : Halle Mcleod
Transcription

SMPSMP

SMPApplication NotesSMP High Frequency Push-onconnector that can be adaptable for use in wide variety of high reliabilityapplications. This connector is suitable for applications ranging fromhermetic modules to backplanes. The multitude of configurations and stylesprovide specifically tailored solutions for a wide range of cabled and moduleto module assemblies. A unique feature of this connector is the ability toinstall cable assemblies with minimal movement. The floating connectorfeature provide a maximum allowance for misalignment. Unlike other pushon type connectors, the frequency range of the connector is not self limitedby its push-on, blind mate features. These robust connectors are designed tomate tightly and maintain performance through 40 GHz.Module to Module (board to board)One of the benefits of the SMP connector is its ability to join two RF/Microwave Modules or PC Boards to each other without the use of cablesand the attendant insertion loss penalty. In the past, this was difficult andcostly due to the necessary tolerances to ensure good alignment betweenmodules or boards. The key component used in these applications is aninseries, female to female, SMP adapter called a “Bullet”. The bullet isa unique connector, when placed between two SMP male connectorsor shrouds, is used to join two microwave modules or boards. Thismethod produces a tight compact arrangement with good performancecharacteristics from DC to 40 GHz.MisalignmentThe SMP’s ability to tolerate axial and radial misalignment while maintainingmicrowave performance is one of the driving forces behind its widespreadindustry success. The SMP allows for axial and radial misalignment withoutthe use of bulky springs or other alignment tools. This is why it is possibleto use these connectors in module to module (board to board) applications.Although the bullet fits tightly into the shroud, by design it has the ability tomove slightly while maintaining its performance. This slight radial and axialmovement gives the SMP bullet its “Float”. When installed properly, the SMPbullet/shroud combination can withstand .010”(.25mm) axial and .010”(.25mm) radial float.888.265.9162 CRISTEK.COMSMPThe SMP connector is a multi-functional, miniature, high frequency, push-on

SMPApplication NotesSMPDetentsThe SMP male connector is available in three standard detents specified inMIL-STD-348 to provide the proper amount of mating and retention forcefor its selected applications. These are defined as the “full”, “limited”, and“smooth bore”. The full detent provides the highest insertion and withdrawalforces and the smooth bore, the least. The user selects the detent mostFull Detentsuitable for his or her application. The smooth bore is used on manyblindmate applications where increased axial and radial float is needed. Toensure the bullet will stay on one of the modules, the limited or full detentSMP male shroud is used on one module and a smooth bore shroud is usedon the other. When the modules are taken apart the bullet will then remaincaptivated within limited or full detent shroud. The limited detent shroud isLimited Detentoften used when some captivation of the bullet is needed but there is riskthat the higher forces may damaged the component. One example is thepotential risk of cracking a printed circuit board and damaging the solderjoints on the mating, PCB mounted connector. Full detents are used whenSmooth Boreretention forces need to be high, such as in a cable applicationHermetic SealsIn some case it is necessary to have a hermetic module, thus creating highexpense and extreme difficulties for most connectors. In the case of theSMP, it is an easy process to create a hermetic module. All that is neededis an .015” glass feed through and shroud. The glass feed through is firedor soldered in the housing just as any other feed through, then the shroudis placed around the feed through, creating the SMP male connector. Awide variety of shrouds are available to suit many customer preferences.Performance is improved over other hermetic seals since the center pin ofthe feed through is the male contact and no additional contacts or insulators are needed.Cable ConnectorsThe SMP also can be used for cable assemblies. These assemblies have the advantage of being quick disconnectswhile still maintaining performance at frequency ranges higher that other push on type connectors. The full detent isused when mating an SMP cable assembly so than it will maintain the maximum retention. Since a cable assemblydoes not need to have axial or radial float, several small changes are made to SMP female interface as defined byMIL-STD-348. This includes adding an anti-rock ring and EMI ring to improve performance of the connector andreduce RF leakage. The SMP connectors are available for use on both semi-rigid and flexible cable types.CRISTEK.COM 888.265.9162

SMPSMP Connector Performance SpecificationsElectrical50 OhmsDC to 40 GHz6.0 milliohmsSMPImpedanceOperating FrequencyCenter Contact ResistanceDielectric Withstanding Voltage (60 Hz)Sea level70,000 ftCorona Extinction Voltage (70,000ft)RF High Potential Voltage (5MHz)Insulation ResistanceVoltage RatingSea level70,000 ftRF leakage500 Volts RMS Min.125 Volts RMS Min.190 Volts RMS Min.325 Volts RMS Min.5000 Megohms335 Volts RMS Max.65 Volts RMS Max.-80 dB to 3 GHz-65 dB to 26.5 GHzMechanicalAxial MisalignmentRadial MisalignmentDurabilityFull DetentLimited DetentSmooth BoreForce to EngageFull DetentLimited DetentSmooth BoreForce to DisengageFull DetentLimited DetentSmooth BorePermeability.010” (.25mm) Max. .010” (.25mm)100 Cycle500 Cycles1000 Cycles15 lbs (66.7N) Max.10 lbs (44.5 N) Max.2 lbs (8.9N) Max.5 lbs (22.2N) Min.2 lbs (8.9N) Min.0.5 (2.2N) Min. 2.0MuEnvironmentalOperating TemperatureStorage TemperatureCorrosionVibrationRandom VibrationMechanical ShockThermal Shock-65 C to 165 C-65 C to 200 CMIL-STD-202, Method 101 Test Condition B, 5% Salt SolutionMIL-STD-202, Method 204 Test Condition B, 15 min/axisMIL-STD-202, Method 214 Test Condition F, 15 min/axisMIL-STD-202, Method 213 Test Condition I, 100g’s Sawtooth AxisMIL-STD-202, Method 107 Test Condition B, 165 C High Temp.* Individual connector may vary consult factory for specific specification888.265.9162 CRISTEK.COM

SMPSMPSMP Connector Interfaces & MaterialsMaterialsBeryllium Copper (BeCu)Stainless Steel 303PTFEBrassKovarGlassPer ASTM B 196Per ASTM A 484, ASTM A 582, ASTM A 555or ASTM A 581Per ASTM D 1710Per ASTM B 36, ASTM B 121, ASTM B 16or ASTM B 16MPer ASTM F 15Corning 7070Standard FinishGoldNickelPassivateCRISTEK.COM 888.265.9162Per MIL-DTL-45204, Type III, Grade C, Class 1Per SAE ASM 2404 or MIL-DLT-38999 Class 1Per ASTM A967 or SAE AMS 2700

SMP BULLETSSMPSMP BulletsSMP INTERCONNECT (BULLET)Dim AMB1-S254-S1.254SMPCristek Part NumberSMP INTERCONNECT (BULLET)Cristek Part NumberDim AMB1-S395-S1.395SMP INTERCONNECT (BULLET)Cristek Part NumberMD-SFSF-S-001Page 8Dim A.224www.cristek.com714-696-5200888.265.9162 CRISTEK.COM

SMP BULLETSSMPSMP BulletsSMPSMP INTERCONNECT (SPRING LOADED BULLET)MD-SFSF-L-001Dim AOPEN.500Dim istek Part NumberCRISTEK.COM 888.265.9162714-696-5200www.cristek.comPage 9

SMP SEMI-RIGID CABLE CONNECTORSSMPSMP Semi-rigid Cable ConnectorsSMP FEMALE, STRAIGHT, SEMI-RIGID CABLECristek Part NumberDim ADIM BSR .086SR -002MA1-SFCS-002SMPCable TypeSMP FEMALE, RIGHT ANGLE, SEMI-RIGID CABLECable TypeCristek Part NumberSR .086SR .047MA1-SFCR-01-001MA1-SFCR-02-001Page 10www.cristek.com714-696-5200888.265.9162 CRISTEK.COM

SMP SEMI-RIGID CABLE CONNECTORSSMPSMP Semi-rigid Cable ConnectorsSMPSMP FEMALE, RIGHT ANGLE, SEMI-RIGID CABLECable TypeCristek Part NumberDim ADim BSR .086SR .047MA1-SFCR-003MA1-SFCR-004.265.230210.192SMP FEMALE, RIGHT ANGLE, SEMI-RIGID CABLE, 26 GHzCable TypeCristek Part NumberDim ASR .086SR 00CRISTEK.COM 888.265.9162www.cristek.comPage 11

SMP SEMI-RIGID CABLE CONNECTORSSMPSMP Semi-rigid Cable ConnectorsSMP STRAIGHT SHROUD, SEMI-RIGID CABLECristek Part NumberDim ASR .086SR CS-002.300.285SMPCable TypeSMP FEMALE, SNAP IN FLOAT MOUNT, SEMI RIGID CABLECable TypeCristek Part NumberDim ASR .086SR .047SR .086SR FCM-02-002.093.093.125.125Page 12www.cristek.com714-696-5200888.265.9162 CRISTEK.COM

SMP SEMI RIGID CABLE CONNECTORSSMPSMP Semi-rigid Cable ConnectorsSMPSMP FLANGE MOUNT SHROUDS, SEMI-RIGID CABLE, NON HERMETICCable TypeCristek Part NumberDetentDim ADim BDim CDim DDim ESR .086MA-SMCF-01-001-FDFDØ.400.282.165Ø.073.135SR .086MA-SMCF-01-001-LDLDØ.400.282.165Ø.073.135SR .086MA-SMCF-01-001-SBSBØ.400.282.165Ø.073.135SR .047MA-SMCF-02-001-FDFDØ.400.282.165Ø.073.095SR .047MA-SMCF-02-001-LDLDØ.400.282.165Ø.073.095SR .047MA-SMCF-02-001-SBSBØ.400.282.165Ø.073.095SR .086MA-SMCF-01-002-FDFDØ.480.328.186Ø.098.135SR .086MA-SMCF-01-002-FDLDØ.480.328.186Ø.098.135SR .086MA-SMCF-01-002-FDSBØ.480.328.186Ø.098.135SR .047MA-SMCF-02-002-FDFDØ.480.328.186Ø.098.095SR .047MA-SMCF-02-002-LDLDØ.480.328.186Ø.098.095SR .047MA-SMCF-02-002-SBSBØ.480.328.186Ø.098.095SR .086MA-SMCF-01-003-FDFDØ.625.481.223Ø.102.135SR .086MA-SMCF-01-003-LDLDØ.625.481.223Ø.102.135SR .086MA-SMCF-01-003-SBSBØ.625.481.223Ø.102.135SR .047MA-SMCF-02-003-FDFDØ.625.481.223Ø.102.095SR .047MA-SMCF-02-003-LDLDØ.625.481.223Ø.102.095SR -696-5200CRISTEK.COM 888.265.9162www.cristek.comPage 13

SMP SEMI-RIGID CABLE CONNECTORSSMPSMP Semi-rigid Cable ConnectorsSMP SNAP IN SHROUD, PANEL MOUNT, SEMI-RIGID CABLECristek Part NumberDetentDim ASR .086SR .047SR .086SR .047SR .086SR .047MA-SMCJ 01-001-FDMA-SMCJ-02-001-FDMA-SMCJ 01-001-LDMA-SMCJ-02-001-LDMA-SMCJ .310.350.310SMPCable TypeSMP THREADED SHROUD, BULKHEAD MOUNT, SEMI-RIGID CABLECable TypeCristek Part NumberDetentDim ASR .086SR .047SR .086SR .047SR .086SR .047SR .086SR SBCMCM.323.283.323.283.323.283.323.283888.265.9162 CRISTEK.COMPage 14www.cristek.com714-696-5200

SMP FLEXIBLE CABLE CONNECTORSSMPSMP Flexible Cable ConnectorsSMPSMP FEMALE, STRAIGHT, FLEXIBLE CABLECable TypeCristek Part NumberDim ARG178RG316MA-SFCS-05-001MA-SFCS-06-001.300.300SMP FEMALE, RIGHT ANGLE, FLEXIBLE CABLECable TypeCristek Part NumberDim STEK.COM 888.265.9162714-696-5200www.cristek.comPage 15

SMP FLEXIBLE CABLE CONNECTORSSMPSMP Flexible Cable ConnectorsSMP FEMALE, SNAP IN FLOAT MOUNT, FLEXIBLE CABLECristek Part NumberDim e TypeSMP STRAIGHT SHROUD, FLEXIBLE CABLECable TypeCristek Part NumberDim 285FDFDPage 16www.cristek.com714-696-5200888.265.9162 CRISTEK.COM

SMP FLEXIBLE CABLE CONNECTORSSMPSMP Flexible Cable ConnectorsSMPSMP SNAP IN SHROUD, PANEL MOUNT, FLEXIBLE CABLECable TypeCristek Part NumberDim 0.400.400.400FDLDCMFDLDCMSMP THREADED SHROUD, BULKHEAD MOUNT, FLEXIBLE CABLECable TypeCristek Part NumberDim 10.450.450.450FDLDCMFDLDCM714-696-5200CRISTEK.COM 888.265.9162www.cristek.comPage 17

SMP HERMETIC SOLUTIONSSMPSMP Hermetic SolutionsSMP FLANGE MOUNT SHROUDDetentDim ADim BDim CDim DDIM EMA1-SMMF-001-FDFDØ.400.282.165Ø.073.170 MAXMA1-SMMF-001-LDLDØ.400.282.165Ø.073.170 MAXMA1-SMMF-001-SBSBØ.400.282.165Ø.073.170 MAXMA1-SMMF-002-FDFDØ.480.328.186Ø.098.170 MAXMA1-SMMF-002-LDLDØ.480.328.186Ø.098.170 MAXMA1-SMMF-002-SBSBØ.480.328.186Ø.098.170 MAXMA1-SMMF-003-FDFDØ.625.481.223Ø.102.170 MAXMA1-SMMF-003-LDLDØ.625.481.223Ø.102.170 MAXMA1-SMMF-003-SBSBØ.625.481.223Ø.102.170 MAXMA1-SMMF-007-CMCMØ.470.352.235Ø.073.240 MAXPage 18www.cristek.com714-696-5200888.265.9162 CRISTEK.COMSMPCristek Part Number

SMP HERMETIC SOLUTIONSSMPSMP Hermetic SolutionsSMPSMP PRESS IN SHROUDCristek Part MMP-001-SBMA1FDLDSBSMP THREAD IN SHROUDCristek Part 1-SBMA1DetentFDLDSB714-696-5200CRISTEK.COM 888.265.9162www.cristek.comPage 19

SMP HERMETIC SOLUTIONSSMPSMP Hermetic SolutionsSMP HERMETIC FEED THRU, .015 DIAMETER PINSMPCristek Part -001-150“L”.070.090.120.150SMP HERMETIC FEED THRU SHROUDED, STANDARD PROFILECristek Part SBFDLDSB.050.050.050.070.070.070.090.090.090Page 20www.cristek.com888.265.9162 CRISTEK.COM714-696-5200

SMP HERMETIC SOLUTIONSSMPSMP Hermetic SolutionsSMPSMP HERMETIC FEED THRU, SHROUDED, LOW PROFILE .120Cristek Part B“L”.050.050.050.070.070.070.090.090.090SMP HERMETIC FEEDTHRU, SHROUDED LOW PROFILE .140Cristek Part 3-LD-090MA1-SMZH-003-SB-090CRISTEK.COM ek.comPage 21

SMP FEED THRU CONNECTORS, NON HERMETICSMPSMP Feed Thru Connectors, Non HermeticSMP PRESS IN “SPARK PLUG”, NON 001-SBMA1SMPCristek Part NumberDetentFDLDSBSMP THREAD IN, “SPARK PLUG”, NON HERMETICCristek Part 1-SBFDLDSBPage 22www.cristek.com714-696-5200888.265.9162 CRISTEK.COM

SMP FEED THRU CONNECTORS, NON HERMETICSMPSMP Feed Thru Connectors, Non HermeticSMPSMP FEED THRU, FLANGE MOUNT, SHROUDED LAUNCHCristek Part 003-SBMA1714-696-5200DetentDim ADim BDim CDim RISTEK.COM 888.265.9162www.cristek.comPage 23

SMP PRINTED CIRCUIT BOARD CONNECTORSSMPSMP Printed Circuit Board ConnectorsSMP MALE, RIGHT ANGLE, THRU HOLE, SBMA1Dim tek Part NumberSMP MALE, VERTICAL, THRU HOLE, PCBCristek Part S-002-SBPage 24Dim stek.com714-696-5200888.265.9162 CRISTEK.COM

SMP PRINTED CIRCUIT BOARD CONNECTORSSMPSMP Printed Circuit Board ConnectorsSMPSMP MALE, VERTICAL, SURFACE MOUNT, PCBCristek Part NumberDim SMUN-001-SB.100SBSMP MALE, VERTICAL, SURFACE MOUNT WITH THRULEGS, PCBCristek Part NumberDim SMUN-004-SB.140SB714-696-5200CRISTEK.COM 888.265.9162www.cristek.comPage 25

SMP PRINTED CIRCUIT BOARD CONNECTORSSMPSMP Printed Circuit Board ConnectorsSMP MALE, VERTICAL, SURFACE MOUNT, 02-SBSBSMPCristek PNSMP MALE, EDGE LAUNCH, PCBCristek A-SMZE-001-SBSBPage 26www.cristek.com888.265.9162 CRISTEK.COM714-696-5200

SMP PRINTED CIRCUIT BOARD CONNECTORSSMPSMP Printed Circuit Board ConnectorsSMPSMP MALE, NOTCH EDGE LAUNCH, PCBCristek PNDim SMZE-002-SB.090SBSMP MALE, SOLDERLESS EDGE LAUNCH, NJ-002-LD.030LDMA-SMNJ-002-SB.030SBCristek PN714-696-5200CRISTEK.COM 888.265.9162DetentFDwww.cristek.comPage 27

SMP TERMINATIONSSMPSMP TerminationsSMP FEMALE, 50 OHM, FIELD GRADE CYRANGEDC to 18 GHz18 to 40 GHzSMPCristek PNPOWERMAX.25 WattsSMP MALE, 50 OHM, FIELD GRADE TERMINATIONCristek A1-SMTS-002-SBSmoothPage 28VSWRMAXFREQUENCYRANGEPOWERMAX.1.15:11.30:1DC TO 18 GHZ18 TO 40 GHZ.25WATTSwww.cristek.com888.265.9162 CRISTEK.COM714-696-5200

SMP BETWEEN SERIES ADAPTERSSMPSMP Between Series AdaptersSMPSMP MALE TO 2.4MM JACK ADAPTERCristek Part 1-FJSL-SS-0011.2:11.2:1DC TO 40 GHZDC TO 40 GHZFullLimitedMD1-FJSS-SS-0011.2:1DC TO 40 GHZSmoothSMP FEMALE TO 2.4MM JACK ADAPTERCristek Part NumberMD1-FJSF-SS-001VSWRMAX1.2:1CRISTEK.COM 888.265.9162714-696-5200FREQUENCYRANGEDC TO 40 GHZwww.cristek.comPage 29

SMP BETWEEN SERIES ADAPTERSSMPSMP Between Series AdaptersSMP MALE TO 2.4MM PLUG ADAPTERVSWR MAXFREQUENCY 1DC TO 40 GHZDC TO 40 GHZFullLimitedMD1-FPSS-SS-0011.2:1DC TO 40 GHZSmoothSMP FEMALE TO 2.4MM PLUG ADAPTERCristek Part NumberVSWRMAXFREQUENCYRANGEMD1-FPSF-SS-0011.2:1DC TO 40 GHZPage 30www.cristek.com714-696-5200888.265.9162 CRISTEK.COMSMPCristek Part Number

SMP 888.265.9162 CRISTEK.COM SMP SMP High Frequency Push-on The SMP connector is a multi-functi

Related Documents:

MA1 MA1 MA1 MA1. 888.265.9162 CRISTEK.COM SMPM SMPM Page 42 www.cristek.com 714-696-5200 Cristek Part Number Detent MA-MMMP-001-FD FD MA-MMMP-001-SB SB Cristek Part Number Detent MA-MMMT-001-FD FD MA-MMMT-001-SB SB SMPM THREAD IN SHROUD SMPM PRE

SMP 888.265.9162 CRISTEK.COM SMP SMP High Frequency Push-on The SMP connector is a multi-functional, miniature, high frequency, push-on connector that can be adaptable for use in wide variety of high reliability

Algebra I MS Exemplar Unit Mathematics Algebra I Edition 1 Lesson 1: Introducing Quadratic Functions Focus Standard(s): F-IF.7a Additional Standard(s):F-IF.1, F-IF.4 Standards for Mathematical Practice:SMP.1, SMP.2, SMP.3, SMP.4, SMP.5, SMP. 6, SMP.7, SMP.8 Estimated Time: 60 minutes - 180 minutes Resources and Materials:

SMP SERIES Microminiature Connectors INTERFACE MATING DIMENSIONS FEATURES The SMP has a subminiature interface suitable for miniaturized high frequency coaxial modules up to 40Ghz. SMP’s can be used as PC board to board interconnects by connecting a male SMP on each of the PC boards by a female-to-female adapter.

priced misalignment RF coaxial interconnect solutions on the market today. . The SMP series meets MIL STD 348 specifications the . spacing as low as 4.8 mm. Radiall also offers multi-way connectors with SMP interface to optimize the positioning of connectors, increasing density and misalignment tolerances

connectors like SMP or SMP-spring while offering lower cost. Featuring an optimized interface, SMP-MAX can work up to 6 GHz board to board distance misalignment at least 2.0 mm and radial misalignment 3 minimum. The SMP-MAX series offers 2 levels of retention provided by the receptacles: Slide-on, for the lowest retention

SMP Connectors The SMP push-on connector family, originally designed by CarlisleIT, is the ideal solution for board-to-board and cable-to-board connections within RF/Microwave systems operating up to 40 GHz. PCB Board Mount SMP Assembly 2-Port SMP Connector Block (Hermetic available) Spring-Loaded SMP Bullets (PCB) (PCB) P757-2 P922-2CC P703-4 .

the ASTM D 4255/D 4255M The standard test method for in-plane shear properties of polymer matrix composite materials by the rail shear method. For the latter, however, a modified design of the three-rail shear test, as proposed by the authors in Ref. 22 is used. The authors have already modelled the nonlinear shear stress–strain behavior of a glass fibre-reinforced epoxy, by performing [þ .