Technical Data Sheet OPTO INTERRUPTER
Technical Data SheetOPTO INTERRUPTERITR8105 Features․Wide gap between light emitter and detector(2.6 mm)․High sensing accuracy․Pb free․The product itself will remain within RoHS compliant version. DescriptionsThe ITR8105 is a gallium arsenic infrared emitting diodewhich is coupled with a silicon photo transistor in a plastichousing. The packaging system is designed to optimizes themechanical resolution, coupling efficiency, and insulates ambientlight. The slot in the housing a provides a means of interruptingthe signal with printer, scanner, copier, or other opaque material,switching the output from an ” ON” to” OFF” state. et vending machine․Opto-electronic switch Device Selection GuideDevice No.Chip MaterialLENS COLORIRGaAsWater clearPTSiliconWater clearEverlight Electronics Co., Ltd.http:\\www.everlight.comRev 3Page: 1 of 8Device No：DRX-081-003Prepared date：07-21-2005Prepared by：Eric Chen
Technical Data SheetOPTO INTERRUPTERITR8105Package DimensionsNotes: 1.All dimensions are in millimeters2.The tolerance not marked is 0.20 mm in the drawing.Everlight Electronics Co., Ltd.http:\\www.everlight.comRev 3Page: 2 of 8Device No：DRX-081-003Prepared date：07-21-2005Prepared by：Eric Chen
Technical Data SheetOPTO INTERRUPTER Absolute Maximum Ratings (Ta 25 )ITR8105ParameterPower Dissipation at(or below) 25 FreeSymbolRatingsUnitPd75mWReverse VoltageVR5VForward CurrentIF50mAPeak Forward CurrentPulse width 100μs, Duty cycle 1%IFP1ACollector Power DissipationPC75mWCollector CurrentIC20mACollector-Emitter VoltageVCEO30VEmitter-Collector VoltageOperating TemperatureVECO5VTopr-25 85ºCStorage TemperatureTstg-40 85ºCLead Soldering Temperature(1/16 inch from body for 5 seconds)Tsol260ºCAir TemperatureInputOutputElectro-Optical Characteristics (Ta 25 Min.Typ. Max.UnitConditionForward VoltageVF--1.21.6VIF 20mAReverse Current-Peak WavelengthIRλP-10μAVR 5V-940-nmIF 20mADark CurrentICEO--100nAVCE 10VC-E SaturationVoltageVCE(sat)--0.4VIC 0.5mA, IF 20mACollector CurrentIC(ON)1415mAVCE 5V,IF 10mARise TimetR-20-μsFall TimetF-20-μsVCE 5V,IC 1 mA,RL 1 KΩEverlight Electronics Co., Ltd.http:\\www.everlight.comRev 3Page: 3 of 8Device No：DRX-081-003Prepared date：07-21-2005Prepared by：Eric Chen
Technical Data SheetOPTO INTERRUPTERITR8105 Typical Electrical/Optical/Characteristics Curves for IREverlight Electronics Co., Ltd.http:\\www.everlight.comRev 3Page: 4 of 8Device No：DRX-081-003Prepared date：07-21-2005Prepared by：Eric Chen
Technical Data SheetOPTO INTERRUPTERTypical Electrical/Optical/Characteristics Curves for PTITR8105Typical Electro-Optical Characteristics CurvesEverlight Electronics Co., Ltd.http:\\www.everlight.comRev 3Page: 5 of 8Device No：DRX-081-003Prepared date：07-21-2005Prepared by：Eric Chen
Technical Data SheetOPTO INTERRUPTERITR8105Reliability Test Item And ConditionThe reliability of products shall be satisfied with items listed below.Confidence level：90%、LTPD：10%NO. ItemTest ConditionsTest Hours/CyclesTa 260 3 C10 1 sec15mins 50Cycles2 Temperature Cycle H : 85 5minsL : -55 15mins1 Solder Resistance3 Thermal ShockH : 85 5mins4 High TemperatureStorageTEMP.： 100 5 Low TemperatureStorageTEMP.：-55 6 DC Operating Life VCE 5V7 High Temperature/ 85 / 85% R.HAc/Re22pcs0/122pcs VF U 1.2IC(ON) L 0.80/10/11000hrs22pcs U：UpperSpecificationLimit22pcs L：Lower0/11000hrsSpecification22pcs cs5minsL :-55 Sample FailureSizes JudgementCriteriaHigh HumidityEverlight Electronics Co., Ltd.http:\\www.everlight.comRev 3Page: 6 of 8Device No：DRX-081-003Prepared date：07-21-2005Prepared by：Eric Chen
Technical Data SheetOPTO INTERRUPTERITR8105 Packing Specifications4.53.5Label4.05.519 0.51.Bag15 LabelCPN: Customer’s Production NumberP/N : Production NumberQTY: Packing QuantityCAT: RanksHUE: Peak WavelengthREF: ReferenceLOT No: Lot NumberMADE IN TAIWAN: Production PlaceUNIT：cmEverlight Electronics Co., Ltd.http:\\www.everlight.comRev 3Page: 7 of 8Device No：DRX-081-003Prepared date：07-21-2005Prepared by：Eric Chen
Technical Data SheetOPTO INTERRUPTERITR8105 Packing Quantity Specification1. 150Pcs/1Bag，4Bags/1Box2. 10Boxes/1CartonNotesAbove specification may be changed without notice. EVERLIGHT will reserve authority onmaterial change for above specification.When using this product, please observe the absolute maximum ratings and the instructionsfor using outlined in these specification sheets. EVERLIGHT assumes no responsibility forany damage resulting from use of the product which does not comply with the absolutemaximum ratings and the instructions included in these specification sheets.These specification sheets include materials protected under copyright of EVERLIGHT CO.Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT consent.EVERLIGHT ELECTRONICS CO., LTD.Office: No 25, Lane 76, Sec 3, Chung Yang Rd,Tucheng, Taipei 236, Taiwan, R.O.CTel: 886-2-2267-2000, 2267-9936Fax: 886-2267-6244, 2267-6189, 2267-6306http:\\www.everlight.comEverlight Electronics Co., Ltd.http:\\www.everlight.comRev 3Page: 8 of 8Device No：DRX-081-003Prepared date：07-21-2005Prepared by：Eric Chen
OPTO INTERRUPTER Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 3 Page: 6 of 8 Device No：DRX-081-003 Prepared date：07-21-2005 Prepared by：Eric Chen ITR8105 Reliability Test Item And Condition The reliabilit
Trident is available in any combination of load break switch and fault interrupter ways and configurations. The fault interrupter features a trip-free mechanism, providing . 12 4 way with 1 load break, 3 fault interrupter 13 3 way with 3 load break, 0 fault interrupter For all other configurations, model is same as digit 4 and 5
The optical electronics are mounted on an opto-board. We produce opto-boards of two flavours. For outer barrel layer and the disk system each module requires one link for transmitting data, therefore each opto-board contains two 4-channel VDC chips plus one 8-ch
1 Opto Electronics PG (Opto Electronics & Communication Systems) 2 Fibre Optics PG (Opto Electronics & Communication Systems) 3 Optical Communication Technology PG (Opto Electronics & Communication Systems) 4 Power Electronics B Tech Electrical & Electronics Engg. (CUSAT) 5 DC Machines and Transformers B Tech
GE's BreakMaster Load Interrupter Switch consists of an air insulated, three pole, gang-operated, quick-make, quick-break, load interrupter switch in a floor mounted metal enclosure. It can be applied with power fuses and many other protective devices to provide safe, economical switching and circuit protection where infrequent
The switch consists of two two-position (open closed) air-interrupter switches connected in parallel on the load side, key-interlocked so both incoming line switches cannot be closed at the same time. The LVPD double break interrupter switch has the advantage of isolat ing two lines permitting maintenance of one
Auto-blast Interrupter and Transfer Switch GEH-2007 1. Insulator 8. Arc Clwte 2. Arc Chute Younting 9. Arc Runner Bolts 10. Arcing Tip 3. Contact Block 11. Trip Latch 4. Piston 12. Trip Roller s. Puffer Cylinder 13. Auxiliary Blade 6. Insulator 14. Primary Blade 7. Hinge Block 15. Hinge Stud Fig. Cut-away View Of SE-5 Interrupter Switch and the .
The Best Engineered Switch An important design feature is the HVL load interrupter's direct-drive operating mechanism. Our engineers concluded that chain-drive systems were simply too unreliable, so they created a chainless direct drive. The result is one of the most dependable and consistent load interrupter switches in the industry.
America’s Problem-Solving Courts: The Criminal Costs of Treatment and the Case for Reform CYNTHIA HUJAR ORR President, NACDL San Antonio, TX JOHN WESLEY HALL Immediate Past President, NACDL Little Rock, AR NORMAN L. R EIMER Executive Director, NACDL Washington, DC EDWARD A. M ALLETT President, FCJ Houston, TX KYLE O’D OWD Associate Executive Director For Policy, NACDL Washington, DC .
