CS10 CS15 UserManual En - GEFOS Leica
Leica CS10/CS15User ManualVersion 1.0English
2CS10/CS15, IntroductionIntroductionPurchaseCongratulations on the purchase of a Leica CS10/CS15.This manual contains important safety directions as well as instructions for settingup the product and operating it. Refer to "5 Safety Directions" for further information.Read carefully through the User Manual before you switch on the product.ProductidentificationThe type and serial number of your product are indicated on the type plate.Enter the type and serial number in your manual and always refer to this informationwhen you need to contact your agency or Leica Geosystems authorised service workshop.Type:Serial No.:
SymbolsThe symbols used in this manual have the following meanings:Type Danger Warning Caution)CS10/CS15, IntroductionDescriptionIndicates an imminently hazardous situation which, if notavoided, will result in death or serious injury.Indicates a potentially hazardous situation or an unintendeduse which, if not avoided, could result in death or seriousinjury.Indicates a potentially hazardous situation or an unintendeduse which, if not avoided, may result in minor or moderateinjury and/or appreciable material, financial and environmentaldamage.Important paragraphs which must be adhered to in practice asthey enable the product to be used in a technically correct andefficient manner.3
4CS10/CS15, IntroductionTrademarks AllValidity of thismanualAvailabledocumentationWindows is a registered trademark of Microsoft Corporation in the United Statesand other countriesCompactFlash and CF are trademarks of SanDisk CorporationBluetooth is a registered trademark of Bluetooth SIG, Inc.SD is a trademark of the SD Card Associationother trademarks are the property of their respective owners.This manual applies to the CS10 and CS15 field controllers. Differences between thevarious models are marked and described.NameDescription/FormatCS10/CS15User ManualAll instructions required in order to operate the product 9to a basic level are contained in the User Manual.Provides an overview of the product together with technical data and safety directions.NameDescription/FormatViva GNSSGettingStarted GuideDescribes the general working of the product in9standard use. Intended as a quick reference field guide.99
NameDescription/FormatViva TPSGettingStarted GuideDescribes the general working of the product in9standard use. Intended as a quick reference field guide.9Viva SeriesTechnicalReferenceManualOverall comprehensive guide to the product and application functions. Included are detailed descriptions ofspecial software/hardware settings and software/hardware functions intended for technical specialists.9Refer to the following resources for all CS10/CS15 documentation/software: the Leica Viva Series DVD https://myworld.leica-geosystems.commyWorld@Leica Geosystems (https://myworld.leica-geosystems.com) offers awide range of services, information and training material.With direct access to myWorld, you are able to access all relevant services wheneverit is convenient for you, 24 hours a day, 7 days per week. This increases your efficiency and keeps you and your equipment instantly updated with the latest information from Leica Geosystems.CS10/CS15, Introduction5
6CS10/CS15, IntroductionServiceDescriptionmyProductsSimply add all Leica Geosystems products that you and your companyown. View detailed information on your products, buy additionaloptions or Customer Care Packages (CCPs), update your productswith the latest software and keep up-to-date with the latest documentation.myServiceView the service history of your products in Leica Geosystems ServiceCenters and detailed information on the services performed on yourproducts. For your products that are currently in Leica GeosystemsService Centers view the current service status and the expected enddate of service.mySupportCreate new support requests for your products that will be answeredby your local Leica Geosystems Support Team. View the completehistory of your Support and view detailed information on eachrequest in case you want to refer to previous support requests.myTrainingEnhance your product knowledge with the Leica Geosystems Campus- Information, Knowledge, Training. Study the latest online trainingmaterial or download training material on your products. Keep up-todate with the latest News on your products and register for Seminarsor Courses in your country.
Table of ContentsIn this manualChapter1Description of the System1.11.21.31.41.52OverviewTerminologySystem Concept1.3.1Software Concept1.3.2Power Concept1.3.3Data Storage ConceptCS Components1.4.1CS101.4.2CS15Docking Station ComponentsUser Interface2.12.23PageKeyboardOperating PrinciplesOperation3.1CS10/CS15, Table of ContentsEquipment Setup101011131315161818202223232728287
8CS10/CS15, Table of Contents3.23.33.43.53.64Care and Transport4.14.24.353.1.1Fixing the Display Foil to the CS3.1.2Fixing a Hand Strap to the CS3.1.3Fixing the Slot Cover to the CS3.1.4Setting up as Handheld GNSS3.1.5Setting up the Docking Station3.1.6Connecting to a Personal ComputerPower FunctionsBatteries3.3.1Operating Principles3.3.2Changing the Battery3.3.3Charging the BatteryWorking with the Memory DeviceLED Indicators on CS10/CS15Using the Digital CameraTransportStorageCleaning and DryingSafety Directions5.1General 60
5.25.35.45.55.65.76Technical Data6.16.26.36.47Intended UseLimits of UseResponsibilitiesHazards of UseElectromagnetic Compatibility EMCFCC Statement, Applicable in U.S.CS10/CS15 Technical DataGS05/GS06 Technical Data6.2.1Tracking Characteristics6.2.2Accuracy6.2.3Technical DataAntennas Technical DataConformity to National Regulations6.4.1CS106.4.2CS15International Limited Warranty, Software Licence AgreementAppendix AIndexCS10/CS15, Table of ContentsPin Assignments and Sockets6163646672757979838385868992929597991029
10CS10/CS15, Description of the System1Description of the System1.1OverviewSystemcomponentsGS06GS05CS 028CS10CS15
1.2TerminologyCS generaldescriptionCS is a collective term describing the various models (CS10/CS15) of the multipurpose field controller which is used with GNSS and TPS instruments.Colour displayInternal radio modem*1Internal battery*2SD cardCompactFlash cardBluetoothWireless LAN999999999999999999CS15)Windows CETouch screenCS10IEEE 802.11b/g*1ModelCS availablemodelsUse the supplied stylus on the screens of the touch screen.*1 optional*2 removableCS10/CS15, Description of the System11
12CS10/CS15, Description of the SystemCS available radiosRadios for remote control (RCS) are available for the following devices:Radio ModemDescriptionCS10Field controller with an integrated radio modem. This fieldcontroller has a colour display.CS15Field controller with an integrated radio modem. This fieldcontroller has a colour display.)All devices contain the same spread spectrum transceiver radio modem.
1.3System Concept1.3.1Software ConceptSoftware for all CSmodelsSoftware typeDescriptionCS firmwareThis software includes:(CS xx.fw)- The language-specific version of Windows CE.- The basic functionality of the CS.Software upload)Uploading CS firmware can take some time. Ensure that the battery is at least75% full before beginning the upload, and do not remove the battery duringthe upload process.Software for DescriptionAll CS modelsThe software is stored in the flash RAM of the CS field controller.The software can be uploaded onto an Leica SD card, LeicaCompactFlash card or a USB stick.CS10/CS15, Description of the System13
CS10/CS15, Description of the System14Software for DescriptionCS firmware update instructions Download the most recent CS firmware file fromhttps://myworld.leica-geosystems.com. Refer to "Introduction". Connect the CS field controller to your PC. Refer to "3.1.6Connecting to a Personal Computer". Copy CS firmware file onto a folder on the Leica SD card, LeicaCompactFlash card or USB stick. Tap the Loader icon from the desktop, to run the Loader application. Browse to the directory into which you copied CS firmware file,select it and start the upload. A message will appear when the upload is complete.Ensure that a Leica SD card or a Leica CF card is insertedinto the CS field controller before starting the upload.)
1.3.2Power ConceptGeneralUse the Leica Geosystems batteries, chargers and accessories or accessories recommended by Leica Geosystems to ensure the correct functionality of the instrument.Power optionsModelPower supplyall CS modelsInternally via GEB211/GEB212 battery, orExternally via docking station, orExternally via GEV235 cable, orExternally via GDC221 car adapterIf an external power supply is connected and the internalbattery is inserted, then the external power is used.CS10/CS15, Description of the System15
16CS10/CS15, Description of the System1.3.3Data Storage ConceptDescriptionData is stored on a memory device. The memory device can be an SD card, CompactFlash card, USB stick or internal memory.Memory deviceSD card:CompactFlash card:USB stick:Internal memory:))All CS field controllers have an SD card slot fitted as standard.An SD card can be inserted and removed. Available capacity:256 MB, 1 GB.All CS field controllers have a CF card slot fitted as standard.A CompactFlash card can be inserted and removed. Availablecapacity: 256 MB, 1 GB.All CS field controllers have a USB port fitted as standard.All CS field controllers have an internal memory fitted asstandard. Available capacity: 1 GB.While other SD cards or CompactFlash cards can be used, Leica Geosystemsrecommends to only use Leica SD cards or Leica CompactFlash cards and isnot responsible for data loss or any other error that can occur while using anon-Leica card.Removing the SD card, CompactFlash card or USB stick while the CS field controller isturned on can cause loss of data. Only remove the SD card, CompactFlash card or USBstick or unplug connecting cables when the CS field controller is switched off.
Transfer data)Data can be transferred in various ways. Refer to "3.1.6 Connecting to a PersonalComputer".CompactFlash cards and SD cards can directly be used in an OMNI drive as suppliedby Leica Geosystems. Other PC card drives can require an adaptor.CS10/CS15, Description of the System17
18CS10/CS15, Description of the System1.4CS Components1.4.1CS10Upside of CS10abcdefghCS 001ija)b)c)d)e)f)g)h)i)j)Slot CoverScreenKeyboardPort coverPower socketUSB A Host portDocking station contactsLEMO port (USB and serial)USB Mini portDSUB9 port
Underside of CS10abcdefghCFSDCS 008)ijka)b)c)d)e)f)g)h)i)j)k)Hand strap bottom clipsHand strapBattery compartmentDigital cameraHand strap top clipsSlotsSlot coverStylusGS05 contactsCompactFlash card slotSD card slotA Bluetooth port is included inside to facilitate connectivity to a digitalcellular phone.CS10/CS15, Description of the System19
20CS10/CS15, Description of the System1.4.2CS15Upside of CS15abcdefghCS 002ija)b)c)d)e)f)g)h)i)j)Slot coverScreenKeyboardPort coverPower socketUSB A Host portDocking station contactsLEMO port (USB and serial)USB Mini portDSUB9 port
Underside of CS15abcdefghCFSDCS 007)ijka)b)c)d)e)f)g)h)i)j)k)Hand strap bottom clipsHand strapBattery compartmentDigital cameraHand strap top clipsSlotsSlot coverStylusGS06 contactsCompactFlash card slotSD card slotA Bluetooth port is included inside to facilitate connectivity to a digitalcellular phone.CS10/CS15, Description of the System21
22CS10/CS15, Description of the System1.5Docking Station ComponentsDocking stationabcdCS 020ea)b)c)d)e)Power socketUSB portDocking station bracketDocking station contactsGEV223 data cable
2User Interface2.1KeyboardKeyboard 15, User Interface2ABCJKL7PQRSCS w keys, OKFn ric keys23
24CS10/CS15, User InterfaceKeyboard 2F8F11F9QWAiESZRDXF10TFCo9.0F7VBKJHNMPOIUYGLpqrCS 006a)b)c)d)e)f)g)h)i)j)k)l)m)n)o)p)q)r)HomeArrow keys, OKON/OFFFn keyNumeric keysBrightnessFunction keys F7 - F12CAPS LockFunction keys F1 - F6FavouritesESCENTERBackspaceVolumeAlpha keysENTERSPACE
KeysKeyFunctionFunction keysF1 - F6F1Correspond to six softkeys that appear on the bottomof the screen when the screen is activated.Function keysF7 - F12F7User definable keys to execute chosen commands oraccess chosen screens.Alpha keysNumeric keysX1To type letters.To type numbers.Caps LockSwitches between upper case and lower case letters.BackspaceClears all entry at the beginning of user input.Clears the last character during user input.EscFnSpaceCS10/CS15, User InterfaceLeaves the current screen without storing any changes.FnSwitches between the first and second level of functionkeys.Enters a blank.25
26CS10/CS15, User InterfaceKeyFunctionEnterSelects the highlighted line and leads to the next logicalmenu / dialog.Starts the edit mode for editable fields.Opens a selectable list.ON/OFFIf CS10/CS15 already off: Turns on CS10/CS15 whenheld for 2 s.If CS10/CS15 already on: Turns to Power Options menuwhen held for 2 s.FavouritesGoes to a website by simply clicking its name.HomeSwitches to the Windows CE Start Menu.Arrow keysMove the focus on the screen.OKOKOKSelects the highlighted line and leads to the next logicalmenu / dialog.Starts the edit mode for editable fields.Opens a selectable list.
2.2Operating PrinciplesKeyboard andtouch screenThe user interface is operated either by the keyboard or by the touch screen withsupplied stylus. The workflow is the same for keyboard and touch screen entry, theonly difference lies in the way information is selected and entered.Operation by keyboardInformation is selected and entered using the keys. Refer to "2.1 Keyboard" for adetailed description of the keys on the keyboard and their function.Operation by touch screenInformation is selected and entered on the screen using the supplied stylus.OperationDescriptionTo select an itemTap on the item.To start the edit mode in editable fieldsTap on the editable field.To highlight an item or parts of it foreditingDrag the supplied stylus from the left tothe right.To accept data entered into an editablefield and exit the edit modeTap on the screen outside of the editablefield.To open a context-sensitive menuTap on the item and hold for 2 s.CS10/CS15, User Interface27
28CS10/CS15, Operation3Operation3.1Equipment Setup3.1.1Fixing the Display Foil to the CSFixing the displayfoil to the CSstep-by-step2134CS 029Step))1.DescriptionEnsure that the display of the CS is free of dust and grease.The non-reflecting display foil has a silver-coloured sticker to peel awaythe carrier foil from the actual display foil.Touch the silver-coloured sticker with two fingers and pull it slowlyupwards. The carrier foil is peeling away.Do not peel the carrier foil more than 2 cm - 3 cm away.)
StepDescription2.Fix the laid open adhesive underside of the display foil at the displayborder.Pay attention that the display foil is not fixed between display anddisplay frame.)3.Peel away the carrier foil bit by bit and smooth it out slowly onto thedisplay.4.Potential air bubbles between display and display foil have to be smoothedout using the included microfibre cloth.Do not use sharp objects!)CS10/CS15, Operation29
30CS10/CS15, Operation3.1.2Fixing a Hand Strap to the CSFixing the CS to ahand strapstep-by-step4123CS 009Step)DescriptionTurn the CS field controller over.1.Take the end of the hand strap and clip it to the base of CS field controller.2.Compress the clips of the main hook.3.Lower the main hook onto the pivot knob of the CS field controller.A click can be felt when the clip is secure.
CS10/CS15, OperationStepDescription4.Adjust the length of the hand strap.31
32CS10/CS15, Operation3.1.3Fixing the Slot Cover to the CSFixing the slotcover to the CSstep-by-step21CS 016StepDescription1.Press the screwdriver end of the supplied stylus on the quarter-turn screwsand loosen them.2.Remove the slot cover.)Reattach the slot cover with the stylus, making sure the quarter-turnscrews are seated.
3.1.4Setting up as Handheld GNSS)The setup GS05/CS10 is identical to the setup GS06/CS15. For simplicity, the setupGS05/CS10 is used in the following.Attaching theGS05 to the CS10step-by-step1243CS 011Step)1.CS10/CS15, OperationDescriptionDetach the slot cover from the CS10. Refer to "3.1.3 Fixing the Slot Coverto the CS".Check the position of the contacts in the inner surface of the GS05.33
34CS10/CS15, OperationStepDescription2.Attach the GS05 to the CS10.3.Press the screwdriver end of the supplied stylus on the quarter-turn screwsand tighten them.4.To achieve the optimal satellite tracking performance, mount the AS05(external GNSS antenna) on the GS05.
3.1.5Setting up the Docking StationMounting components of thedocking stationstep-by-step1122CS 027CS10/CS15, OperationStepDescription1.Hold the docking station bracket as shown in the illustration in relation tothe docking station rack.2.Slightly press the holder into the docking station rack. A click can be feltwhen the holder is secure.35
36CS10/CS15, Operation3.1.6)Connecting to a Personal ComputerMicrosoft ActiveSync (for PCs with Windows XP operating system) or Windows MobileDevice Center (for PCs with Windows Vista operating system) is the synchronisationsoftware for Windows mobile-based pocket PCs. Microsoft ActiveSync or WindowsMobile Device Center enables a PC and a Windows mobile-based pocket PC tocommunicate.Connect USB cableto PC for the firsttime step-by-step7DVD34CS 025StepDescription1.Start the PC.2
CS10/CS15, OperationStepDescription2.Plug the GEV234 cable into CS field controller.For CS field controllers with DSUB9 connector, the GEV223 cablehas to be used.Ensure that the CS field controller is turned off.)))3.Plug the GEV234 cable into the USB port of the PC.If the CS field controller is already turned on, the new hardwarewizard starts up automatically. Click Cancel to quit the new hardware wizard if it starts.4.Insert the Leica Viva Series DVD.5.Run the SetupCS.exe to install the drivers necessary for your instrument.6.The Welcome to InstallShield Wizard for Remote NDIS based LGSdevice connection window appears.7.Turn on the CS field controller.8.Next .9.The Ready to Install the Program window appears.10.Install. The drivers will be installed on your PC.11.The InstallShield Wizard Completed window appears.12.Click Finish to exit the wizard.37
38CS10/CS15, OperationStepDescriptionFor PCs with Windows XP operating system:13.Run the ActiveSync installation program if not already installed.14.Allow USB connections inside the Connection Settings window ofActiveSync.For PCs with Windows Vista operating system:15.Run the Windows Mobile Device Center installation if not already installed.Connect to PCvia USB cablestep-by-step35CS 0262
StepDescription1.Start the PC.2.Plug the GEV234 cable into CS field controller.For CS field controllers with DSUB9 connector, the GEV223 cablehas to be used.)3.Turn the CS field controller on.4.Plug the GEV234 cable into the USB port of the PC.For PCs with Windows XP operating system:)ActiveSync starts up automatically. If does not start automatically,start ActiveSync. If not already installed, run the ActiveSync installation program.5.Allow USB connections inside the Connection Settings window ofActiveSync.6.Click Explore in ActiveSync.)The folders on the CS field controller are displayed under MobileDevices. The folders of the data storage device can be found inStorageCard.For PCs with Windows Vista operating system:CS10/CS15, Operation39
40CS10/CS15, OperationStepDescription)Windows Mobile Device Center starts up automatically. If does notstart automatically, start Windows Mobile Device Center. If notalready installed, run th
https://myworld.leica-geosystems.com myWorld@Leica Geosystems (https://myworld.leica-geosystems.com) offers a wide range of services, information and training material. With direct access to myWorld, you are able to access all relevant services whenever it is convenient for you, 2
UserManual AOMEIBackupper 1 1GettingStarted hesystemrequirements, supportedfilesystems .
USERMANUAL boss 0300088EN-ENG Uptodateversionavailableon www.carel.com boss Localsupervisorformediumandlargesystems ENG LEGGIECONSERVA QUESTEISTRUZIONI
1.2 Part B) Importing the Track Design with LEICA Geo Office 8 1.3 Part C) Loading the Track Design onto the Receiver/Instrument 13 1.4 Part D) Turning on and Starting the Program 14 1.5 Part E) RoadRunner Begin 15 1.6 Part F) RoadRunner Setup 18 2 Checking a Track with Rail Check 20 2.1 Step 1) Positionin
Leica DISTOTM X310 788479 17 Technické údaje CS * platí pro 100% odrazivost ter če (bílá natřená stěna), nízké osvětlení pozadí, 25 C ** platí pro 10 až 500 % odrazivost terče, vysoké osvětlení pozadí, - 10 ºC až 50 ºC *** Tolerance platí od 0,05 do 10 m s 95% úrovní spolehli-
(mounting card and sample) when tested according to TAPPI T-476 with a #CS10 . size and number of corrugated paperboard packed in the container. IV. Quality Assurance Provisions Tests Test procedures and controls specified in this document shall be used to determine the quality of the product. Other procedures and controls must be approved by .
Guía para preparar el examen de selección para ingresar a la licenciatura UNAM-2010 A06 Págs blancas CS10:06a Págs. blancas CS 23/10/09 01:39 p.m. Página 48 Á rea de las C iencias S ociales 52
extra, you may order them, no charge, by phone, email, or mail. They are available through your nearest Muncie Power Products distributor, or at the number and address below: 1-800-FOR-PTOS (367-7867) Muncie Power Products, Inc. P.O. Box 548 Muncie, IN 47308-0548 i
ASME A17.1-2019/CSA B44:19 (Revision of ASME A17.1-2016/CSA B44-16) Safety Code for Elevators and Escalators. Includes Requirements for Elevators, Escalators, Dumbwaiters, Moving Walks, Material Lifts, and Dumbwaiters With Automatic Transfer Devices. AN AMERICAN NATIONAL STANDARD. ASME A17.1-2019/CSA B44:19 (Revision of ASME A17.1-2016/CSA B44-16) Safety Code for Elevators and Escalators x .
