South S82-V GPS GSM Profile And Bluetooth Guide

Creating a South S82-V GPS GSMNetwork Rover Profile andConnecting to a GPS Network DataCorrection Service Using SouthFieldGeniusMay 4, 2012

Creating a South S82-V GPS GSM Network Rover ProfileIntroductionThis guide describes how to create a GPS GSM network roverprofile for your South S82V GNSS receiver.Although this guide describes using a South S82V GPS receiver, theprocedure in this guide can also be followed for connecting to otherSouth receivers such as the S82-T and the S86-T.Important Note: You only need to create a particular profile once.After that South FieldGenius will preserve and use this alreadycreated profile. You are also welcome to create more profiles suchas for a UHF radio GPS profile, but in this guide we explain how tocreate a GSM Network GPS profile.CurrentVersionThis guide was written using South FieldGenius Version 6.0.1installed on a Getac PS236 with Windows Mobile 6.1 installed. Ifyou are using a different version, your screens may look differentlythan what is displayed in this guide.Before you beginHave your South Receiver, data collector with South FieldGeniusinstalled, and a SIM card close by. You will need them to completethis guide.Continued on the following page 2012 MicroSurvey Software Inc.Page 2 of 24

Creating a South S82-V GPS GSM Network Rover Profile,continuedSIM CardYour South S82-V has a slot to insert a SIM card into it. You will needthis card to access the Internet. You will have to remove the batterydoor to access the SIM card slot.Insert your SIM card into your S82-V, power on the receiver and yourdata collector. Then continue to the following page. Make sure thecard has been installed correctly.SIM Card HolderBatteryCompartment DoorContinued on the following page 2012 MicroSurvey Software Inc.Page 3 of 24

Creating a South S82-V GPS GSM Network Rover Profile,continuedStep1Action DisplayTurn on your Getac PS236.This starts up the Windows Mobile 6.1Operating system.Note: Don’t be alarmed if your displayis slightly different from the image onthe right. We may have set up ourdisplay differently to yours. Tap on thebutton.From within the context menu: Tap on the South FieldGeniusmenu selection.Note: If you do not see SouthFieldGenius in your menu then youmust use File Explorer to go toPrograms and find the SouthFieldGenius icon and tap on it. Thenext time you open this Start menu youwill see South FieldGenius in the list.This takes you to the Device ID screen.Continued on the following page 2012 MicroSurvey Software Inc.Page 4 of 24

Creating a South S82-V GPS GSM Network Rover Profile,continuedStep2ActionDisplayIn the Device ID screen: Enter your License Key in theKey field. Press the Apply Key buttonwhen finished.Important Notes: South FieldGeniuswill remember your key, therefore, youwill only have to enter your key once.Once a correct key is entered, you willnot see this screen again.This takes us to the Project Managerscreen after we accept the tip of the day.3License Keys are provided by theinternet registration portal or yourdealer.Please contact your dealer forinformation on License Keys andhow to register your new software.In the Project Manager screen:Since this is a new installation, we onlysee the sample project that comesincluded with South FieldGenius. Wewill create a new project. Tap on the New Project button.This takes us to the Create New Projectscreen.Continued on the following page 2012 MicroSurvey Software Inc.Page 5 of 24

Creating a South S82-V GPS GSM Network Rover Profile,continuedStep4ActionDisplayIn the Create New Project screen: Enter a name for your newproject. In this example, we arecalling the project “Friday Job”.You should enter a moreappropriate name. Press the OK button whenfinished.This opens the Project Review screen.Continued on the following page 2012 MicroSurvey Software Inc.Page 6 of 24

Creating a South S82-V GPS GSM Network Rover Profile,continuedStep5ActionDisplayIn the Project Review screen:Automap files contain pre-defineddescriptions that can be used in SouthFieldGenius. The template library thatyou select will be copied into theproject's folder with a name ofyourprojectname automap.csv, and anychanges that you make to the AutomapLibrary will affect only the projectlibrary, not the template library.Use the Feature List field to select afeature list that you want to use with theproject, for collecting GIS pointattributes.The Raw Data File field indicates thename of the raw file that is going to berecorded. You can select a different oneby pressing the button and eithercreating a new raw file or choosing anexisting one to open.The Modify Project Informationbutton will take you directly to theProject Information screen. There youcan enter notes about the project. Leave these fields as they are. Press the Continue button.This takes us to the Unit Settings screen.Continued on the following page 2012 MicroSurvey Software Inc.Page 7 of 24

Creating a South S82-V GPS GSM Network Rover Profile,continuedStep6ActionDisplayIn the Unit Settings screen: Select which units you wishto use.Important Note: Once this hasbeen set, you cannot change thisproject’s units again.Since we typically prefer to work inthese same units, we will press theSave As Default button. This willmake whatever we select here thefuture default unit setting. Press the Save As Defaultbutton.This takes us to the Save ProjectDefaults screen.7In the Save Project Defaults screen: Press the OK button.This returns us to the Unit Settingsscreen.Continued on the following page 2012 MicroSurvey Software Inc.Page 8 of 24

Creating a South S82-V GPS GSM Network Rover Profile,continuedStep8ActionDisplayIn the Unit Settings screen: Press the OK button.This takes us to the SouthFieldGenius Assistant screen.9In the South FieldGenius Assistantscreen:We are prompted to select acoordinate system.Important Note: You must have acoordinate system selected if youwish to work with GPS. Tap on the Yes button.This takes us to the CoordinateSystem Settings screen.Continued on the following page 2012 MicroSurvey Software Inc.Page 9 of 24

Creating a South S82-V GPS GSM Network Rover Profile,continuedStep10ActionDisplayIn the Coordinate System Settingsscreen: Select the coordinate systemyou wish to work in.In this example we will be selectingthe UTM83-11 North zonecoordinate system with no geoidmodel.Since we will be typically workingin this coordinate system, we willsave it as a default. Press the Save As Defaultbutton.This takes us to the CoordinateSystem Settings screen.11In the Coordinate System Settingsscreen: Tap on the OK button.This takes us to the InstrumentSelection screen.Continued on the following page 2012 MicroSurvey Software Inc.Page 10 of 24

Creating a South S82-V GPS GSM Network Rover Profile,continuedStep12ActionDisplayIn the Instrument Selection screen: Tap on the GPS Rover radiobutton.Note: This is the screen where youcan create new instrument profiles,delete existing profiels, or selectpreviously created profiles.This step continues in the InstrumentSelection screen.13Continuing in the InstrumentSelection screen:Notice the Instrument Profile fieldis now active. Press the Add button.This takes us to the New InstrumentProfile screen.Continued on the following page 2012 MicroSurvey Software Inc.Page 11 of 24

Creating a South S82-V GPS GSM Network Rover Profile,continuedStep14ActionDisplayIn the New Instrument Profilescreen: Enter a name for yourinstrument profile in theProfile Name field. In thisexample, we will call itSouth S82-VNetwork Rover.Instrument profiles are used to saveyour particular instrument’s settingsso that you don’t have to rememberthem or have to set them each timeyou create a new project or select aninstrument to use. Press the Save button.This saves the profile name andreturns us to the InstrumentSelection screen.Continued on the following page 2012 MicroSurvey Software Inc.Page 12 of 24

Creating a South S82-V GPS GSM Network Rover Profile,continuedStep15ActionDisplayIn the Instrument Selection screen:With your newly created instrumentprofile name in the InstrumentProfile field, Press the Edit button.This takes us to the GPS Profilescreen.16In the GPS Profile screen: Tap on the Model andCommunication button. Ensure that your Southreceiver is turned on.This takes us to the Model andCommunication screen.Continued on the following page 2012 MicroSurvey Software Inc.Page 13 of 24

Creating a South S82-V GPS GSM Network Rover Profile,continuedStep17ActionDisplayIn the Model and Communicationscreen: Ensure that the Make fieldhas South selected. Ensure that the Model fieldhas S82-V selected. Ensure that the Port field isset to Bluetooth. Press the Bluetooth Searchbutton.Note: Although we are usingBluetooth to communicate betweenour data collector and receiver, youcould also use a serial cable.Typically COM1 is the port toselect when using a cable. But inthis example, we will useBluetooth. Bluetooth is convenientas there are no cables to deal with.This takes us to the Select BluetoothDevice screen.Continued on the following page 2012 MicroSurvey Software Inc.Page 14 of 24

Creating a South S82-V GPS GSM Network Rover Profile,continuedStep18ActionDisplayIn the Select Bluetooth Devicescreen:We see in this screen all of theBluetooth devices that your datacollector has found. If you do notsee your GPS receiver, press theRefresh List button and anothersearch will be performed. Tap on your GPS receiver’sbutton. In this example, ourreceiver is namedV1082720918 (the receiver’sserial number).Note: Don’t be alarmed if yourscreen does not have the samedevices listed as in the image above.This takes us to the Bluetoothscreen.Continued on the following page 2012 MicroSurvey Software Inc.Page 15 of 24

Creating a South S82-V GPS GSM Network Rover Profile,continuedStep19ActionDisplayIn takes us to the Bluetooth screen: Enter your receiver’sBluetooth PIN. Press the OK button whendone.Note: Your receiver may not have aBluetooth PIN. You may want toleave this field blank and press theOK button. If you connect then youknow a PIN was not required.This returns us to the Model andCommunication screen.20In the Model and Communicationscreen:We see the correct settings for ourreceiver. Tap on the Connect buttonThis takes us to the Link Configurescreen.Continued on the following page 2012 MicroSurvey Software Inc.Page 16 of 24

Creating a South S82-V GPS GSM Network Rover Profile,continuedStep21ActionDisplayIn the Link Configure screen: Ensure that GSM Module hasbeen selected in the LinkDevice field. Press the Setup button.At this time don’t worry about theremaining fields, we will set themlater.This takes us to the Mobile Settingsscreen.Continued on the following page 2012 MicroSurvey Software Inc.Page 17 of 24

Creating a South S82-V GPS GSM Network Rover Profile,continuedIn the Source Type field, you have a choice of NTRIP or Network.[Note: You must tap on the field to activate the context menu to see thechoices.]When using a data provider that uses an NTRIP connection, selectNTRIP. If the data provider does not use NTRIP, then selectNetwork.Network vs.NTRIPStep22ActionDisplayIn the Mobile Settings screen: Enter your PIN code (ifrequired by ISP). Enter your Internet provider’sAccess Point Name in theInternet APN field. In thisexample it is calledinternet.com. Enter your Internet Usernameand Password in theirrespective fields. Use the Source Type field toselect your data source type. Inthis example we will be usingan NTRIP connetion. Enter your IP address, TCP/IPport, user name, and passwordin the appropriate fields. Press the Close button whenfinished.Important Note: The abovesettings will not work with anyInternet provider.This returns us to the Link Configurescreen.Continued on the following page 2012 MicroSurvey Software Inc.Page 18 of 24