SECTION II - Falatghareh.ir

3y ago
196 Views
32 Downloads
9.17 MB
816 Pages
Last View : 1m ago
Last Download : 2m ago
Upload by : Julia Hutchens
Transcription

falatghareh.irfalatghareh.irASME B PVC.I I .A-2019SECTION II2019ASME Boiler andPressure Vessel CodeAn International CodePa r t A-- , ,,,,, , , ,, ,, , - - ,, ,, , ,, ---MATERI ALSFer rou s Material Sp eci fi cat i o ns(Beg in n in g to SA -4 50)Copyright ASME International (BPVC)Provided by IHS under license with ASMENo reproduction or networking permitted without license from IHSLicensee Khalda Petroleum/5986215001, User Amer, MohamedNot for Resale, 07/02/2019 13:57:10 MDT

falatghareh.irfalatghareh.irMarkings such as “ASME,” “ASME Standard,” or any other marking including “ASME,” ASMElogos, or the ASME Single Certification Mark shall not be used on any item that is not constructedin accordance with all of the applicable requirements of the Code or Standard. Use of ASME’sname or logos or of the ASME Single Certification Mark requires formal ASME certification; if nocertification program is available, such ASME markings may not be used. (For Certification andAccreditation Programs, see ation.)-- , ,,,,, , , ,, ,, , - - ,, ,, , ,, ---Items produced by parties not formally possessing an ASME Certificate may not be described,either explicitly or implicitly, as ASME certified or approved in any code forms or other document.Copyright ASME International (BPVC)Provided by IHS under license with ASMENo reproduction or networking permitted without license from IHSLicensee Khalda Petroleum/5986215001, User Amer, MohamedNot for Resale, 07/02/2019 13:57:10 MDT

falatghareh.irfalatghareh.irAN INTERNATIONAL CODE2019 ASME Boiler &Pressure Vessel Code2019 EditionJuly 1, 2019IIMATERIALS-- , ,,,,, , , ,, ,, , - - ,, ,, , ,, ---Part AFerrous MaterialSpecifications(Beginning to SA-450)ASME Boiler and Pressure Vessel Committeeon MaterialsTwo Park Avenue New York, NY 10016 USACopyright ASME International (BPVC)Provided by IHS under license with ASMENo reproduction or networking permitted without license from IHSLicensee Khalda Petroleum/5986215001, User Amer, MohamedNot for Resale, 07/02/2019 13:57:10 MDT

falatghareh.irfalatghareh.irDate of Issuance: July 1, 2019This international code or standard was developed under procedures accredited as meeting the criteria forAmerican National Standards and it is an American National Standard. The Standards Committee that approvedthe code or standard was balanced to assure that individuals from competent and concerned interests havehad an opportunity to participate. The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, andthe public-at-large.ASME does not “approve," "certify," “rate,” or “endorse” any item, construction, proprietary device, or activity.ASME does not take any position with respect to the validity of any patent rights asserted in connection with anyitems mentioned in this document, and does not undertake to insure anyone utilizing a standard against liabilityfor infringement of any applicable letters patent, nor assume any such liability. Users of a code or standard areexpressly advised that determination of the validity of any such patent rights, and the risk of infringement of suchrights, is entirely their own responsibility.Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted asgovernment or industry endorsement of this code or standard.ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals.The endnotes and preamble in this document (if any) are part of this American National Standard.ASME Collective Membership MarkASME Single Certification Mark"ASME" and the above ASME symbols are registered trademarks of The American Society of Mechanical Engineers.The Specifications published and copyrighted by the American Society for Testing and Materialsare reproduced with the Society’s permission.No part of this document may be reproduced in any form, in an electronicretrieval system or otherwise, without the prior written permission of thepublisher.Library of Congress Catalog Card Number: 56-3934Printed in the United States of America-- , ,,,,, , , ,, ,, , - - ,, ,, , ,, ---Adopted by the Council of The American Society of Mechanical Engineers, 1914; latest edition 2019.Copyright ASME International (BPVC)Provided by IHS under license with ASMENo reproduction or networking permitted without license from IHSThe American Society of Mechanical EngineersTwo Park Avenue, New York, NY 10016-5990Copyright 2019 byTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERSAll rights reservedLicensee Khalda Petroleum/5986215001, User Amer, MohamedNot for Resale, 07/02/2019 13:57:10 MDT

falatghareh.irfalatghareh.irList of Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Statement of Policy on the Use of the ASME Single Certification Mark and Code Authorization in AdvertisingStatement of Policy on the Use of ASME Marking to Identify Manufactured Items . . . . . . . . . . . . . . . . . . . . . .Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees . . . . . . . . . . . . . . .Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ASTM Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specifications Listed by Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Summary of Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .List of Changes in Record Number Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Cross-Referencing and Stylistic Changes in the Boiler and Pressure Vessel Code . . . . . . . . . . . . . . . . . . . . . . .SA-6/SA-6MSpecification for General Requirements for Rolled Structural Steel Bars,Plates, Shapes, and Sheet Piling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-20/SA-20MSpecification for General Requirements for Steel Plates for Pressure VesselsSA-29/SA-29MSpecification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-31Specification for Steel Rivets and Bars for Rivets, Pressure Vessels . . . . . . .SA-36/SA-36MSpecification for Carbon Structural Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-47/SA-47MSpecification for Ferritic Malleable Iron Castings . . . . . . . . . . . . . . . . . . . . . .SA-53/SA-53MSpecification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded andSeamless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-105/SA-105MSpecification for Carbon Steel Forgings, for Piping Applications . . . . . . . . . .SA-106/SA-106MSpecification for Seamless Carbon Steel Pipe for High-Temperature ServiceSA-134Specification for Pipe, Steel, Electric-Fusion (ARC)-Welded (Sizes NPS 16 andOver) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-135Specification for Electric-Resistance-Welded Steel Pipe . . . . . . . . . . . . . . . . .SA-178/SA-178MSpecification for Electric-Resistance-Welded Carbon Steel and CarbonManganese Steel Boiler and Superheater Tubes . . . . . . . . . . . . . . . . . . . . .SA-179/SA-179MSpecification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchangerand Condenser Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-181/SA-181MSpecification for Carbon Steel Forgings, for General-Purpose Piping . . . . . .SA-182/SA-182MSpecification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges,Forged Fittings, and Valves and Parts for High-Temperature Service . . .SA-192/SA-192MSpecification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-193/SA-193MSpecification for Alloy-Steel and Stainless Steel Bolting for High-Temperatureor High Pressure Service and Other Special Purpose Applications . . . . . .SA-194/SA-194MSpecification for Carbon and Alloy Steel Nuts for Bolts for High Pressure orHigh Temperature Service, or Both . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-203/SA-203MSpecification for Pressure Vessel Plates, Alloy Steel, Nickel . . . . . . . . . . . . .SA-204/SA-204MSpecification for Pressure Vessel Plates, Alloy Steel, Molybdenum . . . . . . . .SA-209/SA-209MSpecification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-210/SA-210MSpecification for Seamless Medium-Carbon Steel Boiler and SuperheaterTubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-213/SA-213MSpecification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iiiCopyright ASME International (BPVC)Provided by IHS under license with ASMENo reproduction or networking permitted without license from IHSLicensee Khalda Petroleum/5986215001, User Amer, MohamedNot for Resale, 07/02/2019 13:57:10 275279285-- , ,,,,, , , ,, ,, , - - ,, ,, , ,, ---TABLE OF CONTENTS

-285/SA-285MSA-299/SA-299MSA-302/SA-302M-- , ,,,,, , , ,, ,, , - - ,, ,, , ,, -352MSpecification for Electric-Resistance-Welded Carbon Steel Heat-Exchangerand Condenser Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Steel Castings, Carbon, Suitable for Fusion Welding forHigh-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Steel Castings, Martensitic Stainless and Alloy, forPressure-Containing Parts, Suitable for High-Temperature Service . . . . .Specification for Pressure Vessel Plates, Alloy Steel, Manganese-VanadiumNickel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Chromium-Vanadium Alloy Steel Spring Wire . . . . . . . . . .Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality WireSpecification for Piping Fittings of Wrought Carbon Steel and Alloy Steel forModerate and High-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet,and Strip for Pressure Vessels and for General Applications . . . . . . . . . . .Specification for Welded Austenitic Steel Boiler, Superheater,Heat-Exchanger, and Condenser Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler andSuperheater Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Stainless Chromium Steel-Clad Plate . . . . . . . . . . . . . . . . . .Specification for Stainless Chromium-Nickel Steel-Clad Plate . . . . . . . . . . . .Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate . . . . . . . . . .Specification for Carbon Steel Forgings for Pressure Vessel Components . .Specification for Seamless and Welded Ferritic and Martensitic Stainless SteelTubing for General Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Stainless Steel Bars and Shapes . . . . . . . . . . . . . . . . . . . . . .Specification for Gray Iron Castings for Pressure Containing Parts for Temperatures up to 650 F (350 C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Low and Intermediate Tensile Strength Carbon Steel PlatesSpecification for Pressure Vessel Plates, Carbon Steel, Low- andIntermediate-Tensile Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon .Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenumand Manganese-Molybdenum-Nickel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile StrengthSpecification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject toMechanical Property Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless, Welded, and Heavily Cold Worked AusteniticStainless Steel Pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Alloy-Steel and Stainless Steel Bolting for Low-TemperatureService . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi MinimumTensile Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications With Required Notch Toughness . . . . . . . . .Specification for Seamless and Welded Carbon and Alloy-Steel Tubes forLow-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless Ferritic Alloy-Steel Pipe for High-TemperatureService . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Alloy Steel Forgings for Pressure and High-TemperatureParts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Carbon and Low-Alloy Steel Forgings, Requiring NotchToughness Testing for Piping Components . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), forPressure-Containing Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Steel Castings, Ferritic and Martensitic, for PressureContaining Parts, Suitable for Low-Temperature Service . . . . . . . . . . . . . .ivCopyright ASME International (BPVC)Provided by IHS under license with ASMENo reproduction or networking permitted without license from IHSLicensee Khalda Petroleum/5986215001, User Amer, MohamedNot for Resale, 07/02/2019 13:57:10 51

5MSA-516/SA-516MSpecification for Pressure Vessel Plates, Alloy Steel, Double-Normalized andTempered 9% Nickel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and OtherExternally Threaded Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications .Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe forHigh-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Test Methods and Definitions for Mechanical Testing of Steel Products . . .Specification for Carbon and Alloy Steel Forgings for Thin-Walled PressureVessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless Austenitic Steel Pipe for High-TemperatureCentral-Station Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Alloy Steel, ChromiumMolybdenum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use atElevated Temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Wrought Austenitic Stainless Steel Piping Fittings . . . . . . .Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosiveor High-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Steel, Sheet, Carbon, for Pressure Vessels . . . . . . . . . . . . . .Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel forLow-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes . . . .Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for HighTemperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Straight-Beam Ultrasonic Examination of Steel Plates . . . .Specification for Stainless and Alloy-Steel Turbine-Type Bolting SpeciallyHeat Treated for High-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . .Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use . . . . . . . . . . . . . . . . .Specification for General Requirements for Carbon and Low Alloy SteelTubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Centrifugally Cast Austenitic Steel Pipe for HighTemperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for High-Temperature Bolting, With Expansion CoefficientsComparable to Austenitic Stainless Steels . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Carbon Steel, High-StrengthManganese . . . . . . . . . . . .

Adopted by the Council of The American Society of Mechanical Engineers, 1914; latest edition 2019. The American Society of Mechanical Engineers Two Park Avenue, New York, NY 10016-5990

Related Documents:

To the Reader: Why Use This Book? vii Section 1 About the Systems Archetypes 1 Section 2 Fixes That Fail 7 Section 3 Shifting the Burden 25 Section 4 Limits to Success 43 Section 5 Drifting Goals 61 Section 6 Growth and Underinvestment 73 Section 7 Success to the Successful 87 Section 8 Escalation 99 Section 9 Tragedy of the Commons 111 Section 10 Using Archetypal Structures 127

table of contents cover 1 table of contents 2 section 1 – contact information 3 section 2 – facilities 4 section 2.1 – front of house / seating chart 4 section 2.2 – backstage facilities 5 section 3 – stage information 6 section 3.1 – stage 6 section 3.2 – fly system 8 section 3.3 – lineset schedule 8 section 4 – lighting 9 section 4.1 – lighting plot 10

THE SEDDAS USER GUIDE . Index. Section 1: Overview Section 2: Search for User Section 3: Create User ID Section 4: Reassign Institution Section 5: Advanced Search Section 6: Update User Section 7: Disable User ID. Section 8: Reactivate User ID Section 9: Reset Password and Unlock Account Section 10: Entitlements-Overview

section 711 -- steel structures section 712 -- timber structures section 713 -- temporary bridges and approaches section 714 -- concrete culverts and retaining walls section 715 -- pipe culverts, and storm and sanitary sewers section 716 -- jacked pipe section 717 -- structural plate pipe, pipe -arches, and arches section 718 -- underdrains

Section DA: Dampers and Louvers Section SA: Ductwork Section HA: Housings Section RA: Refrigeration Equipment Section CA: Conditioning Equipment Section FA: Moisture Separators Section FB: Medium Efficiency Filters Section FC: HEPA Filters Section FD: Type II Adsorber Cells Section FE: Type III Adsorbers 11

PROPERTY AND CASUALTY INSURANCE GUARANTY ASSOCIATION MODEL ACT . Table of Contents. Section 1. Title . Section 2. Purpose . Section 3. Scope . Section 4. Construction . Section 5. Definitions . Section 6. Creation of the Association . Section 7. Board of Directors . Section 8. Powers and Duties of the Association . Section 9. Plan of Operation .

dc-9 classic – aom table of contents dc-9 classic – aircraft operating manual coolsky, 2012. sections section 1: emergency section 2: limitations section 3: normal operating procedures section 4: planning & performance section 5: aircraft general section 6: ice & rain protection section 7: electrical section 8: fire protection section 9 .

A.R. Paterson, A First Course in Fluid Dynamics, Cambridge University Press. (The recommended text to complement this course - costs ˇ 50 from Amazon; there are 6 copies in Queen’s building Library and 3 copies in the Physics Library) 2. D.J. Acheson, Elementary Fluid Dynamics. Oxford University Press 3. L.D. Landau and E.M. Lifshitz, Fluid Mechanics. Butterworth Heinemann Films There is a .