FIELD OF TESTING : Non-Destructive Testing
Leads Specialist Services Pte LtdNo. 2 Tuas South Avenue 2#03-07 Tuas VistaSingapore 637601Certificate No.:LA-2016-0616-DIssue No.:6Date:02 September 2020Page:1 of 5FIELD OF TESTING : Non-Destructive TestingNDT TECHNIQUES1.MAGNETIC PARTICLETESTINGAC YokeVisible MethodsMATERIALS /PRODUCTSTESTEDAll Materials / Products &weldments under the generalstandardsSTANDARD METHODS/TECHNIQUES/EQUIMENTGeneral StandardsASME SEC V (2019)ASTM E125-63 (2013)ASTM E709 (2015)ASTM E456 (2017)ASTM E1316 (2017)ASTM E1444 (2016)BS ISO 4986 (2010)BS EN 1369 (2012)BS EN ISO 3059 (2012)BS EN ISO 3452 (2013)BS EN ISO 10893-4 (2011)AWS D1.5 (2002)BS EN ISO 9934-1 (2015)BS EN ISO 17638 (2016)BS EN ISO 23278 (2015)BS EN 1290 (1998)BS EN 1291(1998)BS EN 10228-1 (2016)AS 2062 (1997)AS 2812 (2005)The SAC Programme is managed by Enterprise Singapore230 Victoria Street, #10-00 Bugis Junction Office Tower, Singapore 188024 Tel: 65 6278 6666 Fax: 65 6659 0640www.sac-accreditation.gov.sg
Certificate No. :LA-2016-0616-DIssue No. :6Date02 September 2020Page2 of 5::MATERIALS /PRODUCTSTESTEDNDT TECHNIQUESSTANDARD METHODS/TECHNIQUES/EQUIMENTSpecific StandardsASME SEC I (2019)ASME SEC VIII (2019)ASME SEC IX (2019)ASME B31.1 (2018)ASME B31.3 (2018)API 6A ED20API 650 ED12API 1104 ED21ASTM A903 (2017)BS EN 5817 (2014)BS EN 23278 (2015)AWS D1.1 (2015)AWS D1.2 (2014)AS 1171 (1998)AS 2885.1 (2012)2.LIQUID PENETRANTTESTINGSolvent RemovableVisible methodAll Materials / Products &weldments under the generalstandardsGeneral StandardsASME SEC V (2019)ASTM E165 (2012)ASTM E1209 (2010)ASTM E1219 (2016)ASTM E1220 (2016)ASTM E1417 (2016)ASTM E1418 (2016)BS ISO 4987 (2010)BS EN ISO 3059 (2012)BS EN ISO 3452 (2013)BS EN ISO 10893-4 (2011)AS 2062 (1997)AS 2812 (2005)Specific StandardsASME SEC I (2019)ASME SEC VIII (2019)ASME SEC IX (2019)ASME B31.1 (2018)ASME B31.3 (2018)AP1 6A ED 20API 650 ED 12API 1104 ED 21BS EN 1371-2 (2015)BS EN 10228-2 (2016)BS EN 23277 (2015)AS 2885.1 (2012)AWS D1.1 (2015)AWS D1.2 (2014)The SAC Programme is managed by Enterprise Singapore230 Victoria Street, #10-00 Bugis Junction Office Tower, Singapore 188024 Tel: 65 6278 6666 Fax: 65 6659 0640www.sac-accreditation.gov.sg
Certificate No. :LA-2016-0616-DIssue No. :6Date02 September 2020Page3 of 5:MATERIALS /PRODUCTSTESTEDNDT TECHNIQUES3. ULTRASONIC TESTINGa. Flaw Detection andThickness Measurement:All Materials / Products &weldments under the generalstandardsb. Ultrasonic ThicknessMeasurement (UTG)STANDARD METHODS/TECHNIQUES/EQUIMENTGeneral StandardsASME SEC V (2019)ASME SEC I (2019)ASTM E114 (2015)ASTM E797 (2015)ASTM E587 (2015)BS EN 10160 (1999)BS EN ISO 5817 (2014)AS 2452 (2005)BS EN ISO 11666 (2010)BS EN ISO 17640 (2010)BS EN 23279 (2010)BS EN 5817 (2014)BS EN 1011 (2009)AWS D1.2 (2014)AWS D1.5 (2015)BS EN 1990 (2002)ASTM A578 (2017)BS EN ISO 17640 (2017)BS EN ISO 23279 (2017)Specific StandardsASME SEC VIII (2019)ASME SEC IX (2019)ASME B31.1 (2018)ASME B31.3 (2018)AWS D1.1 (2015)ASTM E273 (2015)BS EN 1011-1 (2009)API 1104 ED 21API 653 ED 5PD 5500 (2015)ASTM E164 (2013)API 650 ED 12ASTM E213 (2014)BS EN ISO 10893-1 (2011)BS EN 12680-3 (2011)BS EN10228 PART3& 4 (2016)The SAC Programme is managed by Enterprise Singapore230 Victoria Street, #10-00 Bugis Junction Office Tower, Singapore 188024 Tel: 65 6278 6666 Fax: 65 6659 0640www.sac-accreditation.gov.sg
Certificate No. :LA-2016-0616-DIssue No. :6Date02 September 2020Page4 of 5:MATERIALS /PRODUCTSTESTEDNDT TECHNIQUES4. RADIOGRAPHIC TESTING:All materials/products &Weldments, Casting and Forgingunder the General StandardsSTANDARD METHODS/TECHNIQUES/EQUIMENTGeneral StandardsASME Sec V (2019)ASTM E94-04 (2010)ASTM E592 (2015)ASTM E999 (2015)ASTM E1030 (2015)ASTM E1032 (2012)ASTM E1254 (2013)BS EN 5579 (2013)BS ISO 9236-1 (2004)BS EN ISO10675-1 (2016)BS EN 11699-2 (2011)BS EN 12543 (2011)BS EN ISO 17636-2 (2013)BS EN ISO 19232 (2013)BS EN 25580 (1992)AS 2812 (2005)AS 2885.2 (2016)Specific StandardsASME SEC I (2019)ASME SEC VIII (2019)ASME SEC IX (2019)ASME B31.1 (2018)ASME B31.3 (2018)API 1104: 2015API 6A ED20AWS D1.1 (2015)AWS D1.2 (2014)AWS D1.5 (2015)AS 2574 (2000)AS 2177 (2006)AS 2885.2 (2016)ASTM A435 (2012)ASTM A577 (2012)ASTM E1030/E (2015)ASTM A578 (2012)BS EN 10675-2 (2013)BS EN ISO 11666 (2010)BS EN ISO 17405 (2014)BS EN ISO 22825 (2012)BS EN 10308 (2006)BS EN 14127 (2011)BS EN ISO 4992 (2006)BS EN ISO 17577 (2016)ISO 16809 (2017)ISO 16826 (2014)The SAC Programme is managed by Enterprise Singapore230 Victoria Street, #10-00 Bugis Junction Office Tower, Singapore 188024 Tel: 65 6278 6666 Fax: 65 6659 0640www.sac-accreditation.gov.sg
Certificate No. :LA-2016-0616-DIssue No. :6Date02 September 2020Page5 of 5::MATERIALS /PRODUCTSTESTEDNDT TECHNIQUESSTANDARD METHODS/TECHNIQUES/EQUIMENTISO 16831 (2016)PD 5500 (2015)5. POSITIVE MATERIALIDENTIFICATIONAll Materials / ProductsWeldments covered underGeneral standardsGeneral StandardsASTM G10-04 (2012)ASTM E322 (2012)ASTM E350 (2012)ASTM E415 (2017)ASTM A450 (2015)ASTM A606 (2015)ASTM A751 (2014)Specific StandardsASTM E1621 (2013)ASTM E1085 (2016)ASME II PART A (2019)ASME II PART B (2019)ASME II PART C (2019)AWS A5.5/A5.5M (2014)Approved signatoriesMr. Raymond LimUT, PT, MT onlyMr. Peramiyan SudhanRT, PMI and MT, PTMr. Balu ChinnaduraiUT, MT and RT onlyNote :This laboratory is accredited in accordance with the recognised International Standard ISO/IEC 17025. Alaboratory's fulfilment of the requirements of ISO/IEC 17025 means the laboratory meets both the technicalcompetence requirements and management system requirements that are necessary for it to consistentlydeliver technically valid test results. The management system requirements in ISO/IEC 17025 are written inlanguage relevant to laboratory operations and operate generally in accordance with the principles of ISO 9001.The SAC Programme is managed by Enterprise Singapore230 Victoria Street, #10-00 Bugis Junction Office Tower, Singapore 188024 Tel: 65 6278 6666 Fax: 65 6659 0640www.sac-accreditation.gov.sg
ULTRASONIC TESTING All Materials / Products & ASME SEC V (2019) weldments under the general ASME SEC I (2019) a. Flaw Detection and standards ASTM E114 (2015) Thickness Measurement ASTM E797 (2015) ASTM E587 (2015) b. Ultrasonic Thickness BS EN
EN 571-1, Non-destructive testing - Penetrant testing - Part 1: General principles. EN 10204, Metallic products - Types of inspection documents. prEN ISO 3059, Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions. EN ISO 3452-3, Non-destructive testing - Penetrant testing - Part 3: Reference test blocks.
the development of an on-site non-destructive testing technique to assess the performance of sealants on building facades. Tests were carried out on various . Non-destructive Non-destructive Vertical Horizontal simulated y 1.0858x - 10.229 0.9702 Non-destructive Semi-destructive Vertical - simulated y 0.6159x 33.565 0.8375 .
surprise that there are differences between outcomes of destructive and non-destructive testing as well. It is important to keep the differences in mind: Table 1: Important properties compared Destructive testing (Peel decohesion) Non-destructive testing (PAUT) Tests the strength Checks for deviations Only small part of the joint is investigated.
The rebound (Schmitz) hammer is one of the most popular non-destructive testing (NDT) methods used to test the strength of concrete. This is due to its relatively low cost and simplicity in use (Luke, 2012). Although the non-destructive testing (NDT) results are much quicker compared to the destructive methods, they are more of an approximation .
reliable type of testing, while non-destructive testing is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component or system without causing damage. Non-destructive testing can be applied to both old and new structures (Jedidi Malek, 2014).
DNV GL class guidelines contain methods, technical requirements, principles and acceptance criteria related to classed objects as referred to from the rules. . EN ISO 23277 Non-destructive examination of welds - Penetrant testing- Acceptance levels. EN ISO 16828 Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction .
Non-Destructive Testing Suranaree University of Technology Department of Mechanical Engineering Dr. Teetut Dolwichai. 2 �าย (Non-Destructive Testing) . Introduction to
Non-Destructive Testing of Rail (for Internal & Surface Defects) ETE-01-03 Introduction This document is uncontrolled when printed. Version Number: 1.10 Date Reviewed: 17 Mar 22 Page 7 of 31 1 Introduction 1.1 Purpose This standard sets requirements for non-destructive testing (NDT) of rail and welds. This includes, but is not limited to:
