MULTITEST LTD, VARNA INSPECTION BODY OF TYPE A
EXECUTIVE AGENCYBULGARIAN ACCREDITATION SERVICESBAS reg. No. 267 ОКАACCREDITATIONCERTIFICATEdated: 08.10.2019.Valid until: 30.09.2023.„MULTITEST" LTD, VARNAINSPECTION BODY OF TYPE ARegistered and office address:9009 Varna, West Industrial zone, 1, Atanas Dalchev str., PBox 161UIC: 813141496Scope of accreditationTo carry out inspection of:Products, installations, constructions and equipment specified in accreditation order No. А 440/08.10.2019 to the following methods: radiographic inspection; ultrasonic inspection; magneticparticle inspection; liquid penetrant inspection; visual inspection; eddy current inspection; magneticinspection; Inspection for corrosion (pitting).Percentage content of chemical elements of materials by spectral analysis using optical emission andpositive material identification by X-ray fluorescence method; macroscopic inspection; hardness,weight, geometric dimensions; Hydrostatic / hydraulic method of inspection using water or other inertliquid and/or measurement of volume expansion and / or water capacity; Pneumatic inspection method;Hydrostatic/hydraulic inspection method to rupture; Leak tightness inspection; Dielectric coatings andinsulations by electric spark method; Cyclic pressure - pressure, number and frequency of cycles,torque.Ultrasonic flaw detectors – conventional and phased array, Ultrasonic Thickness Meters, magnetic flawdetectors, Industrial X-ray film viewers, Alternating current, direct current, pulse industrial X-raymachines, Industrial ultraviolet (UV) sources, Flaw detectors for insulating coatings, Crack depthmeasurement instruments, Eddy current flaw detectors, Instruments for determining coating thickness.ACCREDITED ACCORDING TO BDS EN ISO/IEC 17020:2012Order No. А 440/08.10.2019 is integral part of accreditation certificate, 28 pages intotal.Date of initial accreditation: 26.09.2011Date of reaccreditation: 30.09.2019Executive Director:Eng. Irena Borislavova\round stamp and handwritten signature\EA BASBG20190279Sofia 1797, G.M. Dimitrov Blvd., No.52 А, floor 7Tel.: 359 9766 401; Fax.: ( 3592) 9766 415e-mail: office@nab-bas.bghttp://www.nab-bas.bg
Republic of BulgariaEXECUTIVE AGENCYBULGARIAN ACCREDITATION SERVICESSignatory to MLA ЕАORDERNo. А 440Sofia, 08.10.2019On the basis of Art. 10, para. 1, item 2a, in relation to Art. 32, item 1 of the Law on NationalAccreditation of Conformity Assessment Bodies and item 5.3 in connection with modification of anelement of certificate content in accordance with item 4.3.8 of Accreditation procedure BAS QR 2, letterfrom CAB concerning a technical error in the address of management and office incoming No.289/267OКА/9/Е/03.10.2019, Report BAS QF 2.9.5.5 reg. No. 289/267OКА/10/В/07.10.2019 and Order of EABAS No. А 439/08.10.2019.I HEREBY MODIFYORDER No. А 426/30.09.2019 BY EA BASINSPECTION BODY OF TYPE A OF „MULTITEST" LTD, VARNAManagement and office address:9009, Varna, West Industrial Zone, 1, Atanas Dalchev str., PBox 161To perform inspection within the scope as follows:ItemArea of inspection11.2Welded metallic joints ofpressure vessels, pressureequipment andtransportable pressureequipment;Welded jointsof oil pipelines and oil productpipelines;Welded joints of gas pipelinesand their equipment of metallicgas transmission anddistribution pipelines and ofnatural gas equipment,installations and appliances;Permanent joints of gasequipment and HGLinstallations;Metal and reinforced concretestructures, and componentstherefor, industrial fittings andaccessories, includingelements, of heat and watersupply systems, gas equipmentand installations, liftingequipment,Type of inspection3Of new and/orin edparameter/feature4Type, size andlocation ofdiscontinuities/imperfectionsTest/measurement methods,used in inspection5Radiographic inspectionRPK RT-01-03RPK RT-01-04ISO 4993BDS EN ISO 5579BDS EN ISO 10893-6BDS EN ISO 10893-7BDS EN 12681-1BDS EN ISO 16371-2BDS EN ISO 17636-1BDS EN ISO 17636-2ISO 13847GOST R 50.05.07ASTM Е94/Е94МASTM Е1030/Е1030МASTM Е1032ASTM Е1742/Е1742МASTM Е2104ASME BPVC V Article 2ASME B 16.34API 1104API 650Sofia 1797, G.M. Dimitrov Blvd., No.52 А, floor 7Tel.: 359 9766 401; Fax.: ( 3592) 9766 415e-mail: office@nab-bas.bgNormative acts, standards,specifications, schemes6ODSOTSPE, Article 19;Article 21ODSOOOPP, art. 7; article 25;article26ODSONGTDPEIA, article 6;Article 9; article 127; article216 b, zhODSOTSGELPGI,Article 105ODOTSAS, article157NP-084-15NP-105-18ADR- item 6.2.1.5.2,Item 6.7.3.15.3,Item 6.7.4.14.3,Item 6.8.2.1.23RID- item 6.2.1.5.2,Item 6.7.3.15.3,Item 6.7.4.14.3,Item 6.8.2.1.23ADN- part 6 (ADRItem 6.2.1.5.2,Item 6.7.3.15.3,Item 6.7.4.14.3,Item 6.8.2.1.23TSBDS EN 286-1BDS EN 286-2BDS EN 286-3BDS EN 286-4BDS EN 448BDS EN 489BDS EN 1090-1 А1BDS EN 1090-2BDS EN 1090-3BDS EN ISO 3183BDS EN 10213 А1BDS EN 10217-1BDS EN 10217-5
Stamp /ONLY ORIGINALDOCUMENT IS VALID/ВА Л И Д Е НItemArea of inspectionType of nt methods,used in inspection12material handling equipment,pressure equipment, pressurevessels, transportable pressureequipment;Castings and forgingsProducts made of non-metallicand metallic materials and theiralloys, and permanent jointsthereof3451.2Products, made of metallicmaterials and their alloysEA BASOf new and/orin ssRadiographic inspectionRPK RT-01-03BDS EN ISO 20769-1BDS EN ISO 20769-2Order No. А 440/ 08.10.2019Normative acts, standards,specifications, schemes6BDS EN 10217-6BDS EN 10217-7BDS EN 12542BDS EN 12732 А1BDS EN 12952-6BDS EN 12953-5BDS EN 13445-5BDS EN 13458-2BDS EN 13480-5BDS EN 14163BDS EN 14197-2BDS EN ISO 17635BDS EN 1442BDS EN 1251-2BDS EN 12493 А2BDS EN 12972BDS EN 12862BDS EN 13110 А1BDS EN 13322-1BDS EN 13322-2BDS EN 13530-2BDS EN ISO 13628-5BDS EN 14015BDS EN 14025BDS EN 14140BDS EN 14208BDS EN 14398-2 А2BDS EN 14638-1BDS EN 14638-3BDS EN 14893ISO 21029-1BDS EN ISO 5817BDS EN ISO 10042BDS EN ISO 10675-1BDS EN ISO 10675-2BDS EN ISO 6520-1BDS EN ISO 6520-2BDS EN ISO 10893-6BDS EN ISO 10893-7ISO 11513ISO 13847ASMЕ BPVC IASME BPVC III Division 1ASME BPVC III Division 2ASME BPVC III Division 3ASME BPVC VIII Division 1ASME BPVC VIII Division 2ASME BPVC VIII Division 3ASME BPVC IXASME BPVC XIASME B 31.1ASME B 31.3ASME B 16.34ASTM E446ASTM E186ASTM E280ASTM E2422API 1104TSPage 2/27
Stamp /ONLY ORIGINALDOCUMENT IS VALID/ItemArea of inspectionType of inspection1232.1 Welded metallic joints ofOf new and/orpressure vessels, pressurein service/equipment и transportableoperationpressure equipmentobjects/Welded joints of gas pipelines equipment/and their equipment of metallic productsgas transmission anddistribution pipelines and ofnatural gas equipment,installations and appliancesPermanent joints of gasequipment and HGLinstallationsMetal and reinforced concretestructures, and componentstherefor, industrial fittings andaccessories, includingelements, of heat and watersupply systems , gasequipment и installations,lifting equipment, materialhandling equipment, pressureequipment, pressure vessels,transportable pressureequipmentCastings and forgingsProducts made of non-metallicand metallic materials and theiralloys, and permanent jointsthereofEA BASInspectedparameter/feature4Type, size and locationof discontinuities/imperfectionsTest/measurement methods,used in inspection5Ultrasonic inspectionRPK UT-02-03RPK UT-02-04BDS EN ISO 16810BDS EN ISO 16811BDS EN ISO 16823BDS EN ISO 16826BDS EN ISO 16827BDS EN 1802BDS EN 1968BDS EN ISO 9809-1BDS EN ISO 9809-2BDS EN ISO 9809-3BDS EN 10160BDS EN 10228-3BDS EN 10228-4BDS EN 10306BDS EN 10307BDS EN 10308BDS EN ISO 18119BDS EN ISO 10893-8BDS EN ISO 11120BDS EN ISO 11439BDS EN 12680-1BDS EN 12680-2BDS EN 12680-3BDS EN ISO 17640BDS EN ISO 22825ISO 13847BDS EN ISO 10893-11BDS EN ISO 10893-9BDS EN ISO 10893-10GOST R 50.05.02GOST R 50.05.04GOST R 50.05.05ASME BPVC III Division 3ASME BPVC V Article 4ASME BPVC V Article 5ASME B 16.34ASTM E114ASTM E164ASTM E213ASTM E273ASTM E587ASTM E1901ASTM E2192ASTM E2223ASTM E2375ASTM A388/A388MASTM A435/A435MASTM A577/A577MASTM A578/A578MASTM A609/A609MASTM A745/A745MASTM B548API 650API 1104Order No. А 440/ 08.10.2019Normative acts, standards,specifications, schemes6ODSOTSPE, art. 19; art. 21ODSOTSGELPGI article 105ODSOOOPP, article 7; article26ODSONGTDPEIA, article 6;article 9; article 127; article216 b, zhODOTSAS, article 157NP-084-15NP-105-18ADR- item 6.2.1.5.2;item 6.7.3.15.3;item 6.7.4.14.3;item 6.8.2.1.23RID – item 6.2.1.5.2;item 6.7.3.15.3;item 6.7.4.14.3;item 6.8.2.1.23ADN- part 6(ADR-item 6.2.1.5.2;item 6.7.3.15.3;item 6.7.4.14.3;item 6.8.2.1.23)TSBDS EN 1090-1 А1BDS EN 1090-2BDS EN 1090-3BDS EN 10025-1BDS EN 10207BDS EN ISO 3183BDS EN 10160BDS EN 10228-3BDS EN 10228-4BDS EN 10306BDS EN 10307BDS EN 10308BDS EN 10213 А1BDS EN 10216-1BDS EN 10216-2BDS EN 10216-3BDS EN 10216-4BDS EN 10216-5BDS EN 10217-1BDS EN 10217-2BDS EN 10217-3BDS EN 10217-4BDS EN 10217-5BDS EN 10217-6BDS EN 10217-7BDS EN 10222-1BDS EN 10312BDS EN ISO 10893-8BDS EN ISO 10893-9BDS EN ISO 10893-10BDS EN ISO 10961BDS EN 12542BDS EN 12680-1BDS EN 12680-2BDS EN 12680-3BDS EN 12732 А1BDS EN 12952-5BDS EN 12952-6BDS EN 12953-5BDS EN 13445-5BDS EN 13480-5BDS EN 14163BDS EN ISO 17635BDS EN 1802BDS EN 1968BDS EN ISO 18119Page 3/27
Stamp /ONLY ORIGINALDOCUMENT IS VALID/Item1Area of inspectionType of nt methods,used in inspection23452.2 Welded metallic joints ofpressure vessels, pressureequipment and transportablepressure equipmentEA BASOf new and/or in Thicknessservice/ operationobjects/equipment/Ultrasonic inspection by time-offlight diffraction (ToFD) andphased array methodsRPK UT-02-05BDS EN ISO 10863BDS EN 12732 А1BDS EN ISO 13588BDS EN ISO 17640BDS EN ISO 16828ISO 20601ASMЕ BPVC V Article 4ASTM E1961ASTM E2700API 1104Ultrasonic inspectionRPK UT-02-03RPK UT-02-04BDS EN 1968Order No. А 440/ 08.10.2019Normative acts, standards,specifications, schemes6BDS EN ISO 9809-1BDS EN ISO 9809-2BDS EN ISO 9809-3BDS EN ISO 11120BDS EN ISO 11439BDS EN 12493 А2BDS EN 12807BDS EN 12972BDS EN 13530-2BDS EN ISO 13628-5BDS EN 14015BDS EN 14025BDS EN 14893BDS EN 14398-2 А2ISO 21029-1BDS EN ISO 5817BDS EN ISO 10042BDS EN ISO 11666BDS EN ISO 23279BDS EN ISO 6520-1BDS EN ISO 6520-2ISO 13847BDS EN ISO 10893-11ASMЕ BPVC III Division 1ASME BPVC III Division 3ASME BPVC VIII Division 1ASME BPVC VIII Division 2ASME BPVC VIII Division 3ASME BPVC IXASME BPVC XIAPI 650API 1104ASME B31.1ASME B31.3ASME B16.34ASTM A388/A388MASTM A435/A435MASTM A577/A577MASTM A578/A578MASTM A609/A609MASTM A745/A745MASTM B548TSBDS EN ISO 5817BDS EN 12732 A1BDS EN ISO 17635BDS EN ISO 15626BDS EN ISO 19285API 1104ODSOTSPE, article 19;ODSOOOPP, article 7;ODSOTSGELPGI,Article 105ADR-Page 4/27
Stamp /ONLY ORIGINALDOCUMENT IS VALID/ItemArea of inspection12pressure equipmentWelded joints of gas pipelinesand their equipment of metallicgas transmission anddistribution pipelines and ofnatural gas equipment,installations and appliancesPermanent joints of Gasequipment and HGLinstallationsMetal and reinforced concretestructures, and componentstherefor, industrial fittings andaccessories, includingelements, of heat and watersupply systems, gas equipmentи installations, liftingequipment, material handlingequipment, pressureequipment, pressure vessels,transportable pressureequipmentCastings and forgingsProducts made of non-metallicand metallic materials and theiralloysEA BASType of measurement methods,used in inspection4BDSBDSBDSBDSENENENEN5ISO 10893-12141271281712819ASTM Е797/Е797МOrder No. А 440/ 08.10.2019Normative acts, standards,specifications, schemes6items 6.2.1.5.1;6.2.1.6.1; 6.2.5.4.3;6.7.2.4; 6.7.3.4;6.7.4.4; 6.8.2.1.17;6.8.2.1.18; 6.8.2.1.19;6.8.2.1.20; 6.8.2.1.21;6.8.4 а and dRID- items 6.2.1.5.1;6.2.1.6.1; 6.2.5.4.3;6.7.2.4; 6.7.3.4;6.7.4.4; 6.8.2.1.17;6.8.2.1.18; 6.8.2.1.19;6.8.2.1.20; 6.8.2.1.21;6.8.4 a and dADN- part 6 (ADR- items6.2.1.5.1;6.2.1.6.1; 6.2.5.4.3;6.7.2.4; 6.7.3.4;6.7.4.4; 6.8.2.1.17;6.8.2.1.18; 6.8.2.1.19;6.8.2.1.20; 6.8.2.1.21;6.8.4 a and d )TSBDS EN 1440 А1BDS EN ISO 3183BDS EN 10216-1BDS EN 10216-2BDS EN 10216-3BDS EN 10216-4BDS EN 10216-5BDS EN 13480-5BDS EN 3-8BDS EN 1251-2BDS EN 1802BDS EN 1803BDS EN 1968BDS EN ISO 18119BDS EN ISO 7866BDS EN ISO 9809-1BDS EN ISO 9809-2BDS EN ISO 9809-3BDS EN ISO 10462BDS EN ISO 10893-12BDS EN ISO 11118ISO 11119-1ISO 11119-2ISO 11119 3BDS EN ISO 11120BDS EN ISO 11439BDS EN 12257BDS EN 12493 A2BDS EN 12542BDS EN 12732 A1BDS EN 12807BDS EN 12817BDS EN 12819BDS EN 12862BDS EN 12952-6BDS EN 12953-5BDS EN 12972BDS EN 13110 A1BDS EN 13322-1BDS EN 13322-2BDS EN 13445-4BDS EN 13445-5BDS EN 13458-2BDS EN ISO 13628-5BDS EN 14015BDS EN 14025BDS EN 14140Page 5/27
Stamp /ONLY ORIGINALDOCUMENT IS VALID/ItemArea of inspectionType of nt methods,used in inspection123453Welded metallic joints ofOf new and/orpressure vessels, pressurein service/equipment and transportable operationpressure equipmentobjects/Welded joints of gas pipelines equipment/and their equipment of metallic processes/productsgas transmission anddistribution pipelines and ofnatural gas equipment,installations and appliancesPermanent joints of gasequipment and HGLinstallationsMetal and reinforced concretestructures, and componentstherefor, industrial fittings andaccessories, includingelements, of heat and watersupply systems, gas equipmentand installations,lifting equipment, materialhandling equipment, pressurevessels, pressure equipment,transportable pressureequipmentCastings and forgingsProducts, made of metallicmaterials and their alloys, andpermanent joints thereofEA BASType, size and locationof surface article inspectionRPK МТ-03-03RPK МТ-03-04BDS EN 1369BDS EN ISO 9934-1BDS EN 10228-1BDS EN ISO 10893-5BDS EN ISO 17638ISO 13847GOST R 50.05.06ASTM А275/А275МASTM Е709ASTM Е1444/Е1444МASME BPVC V Article 7API 650Order No. А 440/ 08.10.2019Normative acts, standards,specifications, schemes6BDS EN 14208BDS EN 14427BDS EN 14638-1BDS EN 14638-3BDS EN 14876BDS EN 14893BDS EN 14161 А1BDS EN 15888BDS EN 16728 А1ISO 11513ASME SECTION IVASME SECTION VIIIDivision 2ASTM A264ODSOTSPE, art. 20, art. 21.ODSONGTDPEIA, article 6,article 9, art. 127, art. 216b, zhNP-084-15NP-105-18ADR- items 6.2.1.5.2;6.7.3.15.3; 6.7.4.14.3;6.8.2.1.23, 6.8.4d;RID - items 6.2.1.5.2;6.7.3.15.3; 6.7.4.14.3;6.8.2.1.23; 6.8.4dADN- part 6(ADR- items 6.2.1.5.2;6.7.3.15.3; 6.7.4.14.3;6.8.2.1.23; 6.8.4d)TSBDS EN 1090-1 A1BDS EN 1090-2BDS EN 1090-3BDS EN 10213 A1BDS EN 10222-1BDS EN ISO 10893-5BDS EN 12542BDS EN 12732 A1BDS EN 12952-5BDS EN 12952-6BDS EN 12953-5BDS EN 13445-5BDS EN 13480-5BDS EN 14163BDS EN ISO 17635BDS EN 12493 A2BDS EN 12516-1 A1BDS EN 12972BDS EN 14015BDS EN 14025BDS EN 14208BDS EN 14893BDS EN ISO 17638BDS EN ISO 5817BDS EN ISO 23278BDS EN ISO 6520-1BDS EN ISO 6520-2BDS EN ISO 3183BDS EN ISO 10961ISO 13847BDS EN 15888ASME BPVC IASME BPVC III Division 1ASME BPVC III Division 3ASME BPVC VIIIPage 6/27
Stamp /ONLY ORIGINALDOCUMENT IS VALID/ItemArea of inspectionType of nt methods,used in inspectionNormative acts, standards,specifications, schemes123456Division 1ASME BPVC VIIIDivision 2ASME BPVC VIIIDivision 3ASME B31.1ASME B31.3ASME B16.34API 1104ODSOTSPE, article 20, article21;ODSONGTDPEIA, article 6,article 9, article 127, article216 b, zhNP-084-15NP-105-18ADR- items 6.2.1.5.2;6.7.3.15.3; 6.7.4.14.3;6.8.2.1.23RID- items 6.2.1.5.2;6.7.3.15.3, 6.7.4.14.3;6.8.2.1.23ADN- part 6(ADR- items 6.2.1.5.2;6.7.3.15.3; 6.7.4.14.3;6.8.2.1.23)TSBDS EN 1090-1 A1BDS EN 1090-2BDS EN 1090-3BDS EN 10213 A1BDS EN 10222-1BDS EN 12542BDS EN 12732 A1BDS EN 12952-5BDS EN 12952-6BDS EN 12953-5BDS EN 13445-5BDS EN 13480-5BDS EN 14163BDS EN ISO 17635BDS EN 12493 A2BDS EN 12516-1 A1BDS EN 12972BDS EN 13458-2BDS EN 14015BDS EN 14025BDS EN 14208BDS EN 14876BDS EN 14893BDS EN ISO 5817BDS EN ISO 10042BDS EN ISO 23277BDS EN ISO 6520-1BDS EN 1371-1BDS EN 1371-2BDS EN 10228-2BDS EN ISO 10893-4BDS EN ISO 6520-2ISO 13847ASME BPVC IASME BPVC IIIDivision 1ASME BPVC IIIDivision 3ASME BPVC VIIIDivision 1ASME BPVC VIIIDivision 2ASME BPVC VIII4Of new and/orWelded metallic joints ofin service/pressure vessels, pressureequipment and transportable operationpressure equipment; Welded objects/joints of oil pipelines and oilequipment/product pipelines;productsWelded joints of gas pipelinesand their equipment of metallicgas transmission anddistribution pipelines and ofnatural gas equipment,installations and appliances.Permanent joints of gasequipment and HGLinstallationsMetal and reinforced concretestructures, and componentstherefor, industrial fittings andaccessories, includingelements, of heat and watersupply systems, gas equipmentand installations, liftingequipment, material handlingequipment, pressure vessels,equipment and transportablepressure equipment;Castings and forgingsProducts made of non-metallicand metallic materials and theiralloys, and permanent jointsthereofEA BASType, size and location Liquid penetrant inspectionof discontinuities/RPK РТ-04-03indications, breaking the RPK РТ-04-04surfaceGOST R 50.05.09BDS EN ISO 3452-1BDS EN ISO 3452-5BDS EN ISO 3452-6BDS EN 1371-1BDS EN 1371-2BDS EN 10228-2BDS EN ISO 10893-4ISO 13847ASTM Е165/Е165МASTM E1220ASTM E1417/E1417MASTM E1418ASME BPVC V Article 6API 650Order No. A 440/ 08.10.2019Page 7/27
Stamp /ONLY ORIGINALDOCUMENT IS VALID/ItemArea of inspectionType of nt methods,used in inspectionNormative acts, standards,specifications, schemes123455Welded metallic joints ofpressure vessels, pressureequipment и transportablepressure equipmentWelded joints of oil pipelinesand oil product pipelinesWelded joints gas pipelinesand their equipment of metallicgas transmission anddistribution pipelines and ofnatural gas equipment,installations and appliances;Permanent joints of gasequipment и HGL installations;Metal and reinforced concretestructures, and componentstherefor, industrial fittings andaccessories, includingelements, of heat and watersupply systems, gas equipmentи installations, liftingequipment, material handlingequipment, pressure vessels,equipment and transportablepressure equipmentCastings and forgingsProducts made of non-metallicand metallic materials and theiralloys, and permanent jointsthereof6Division 3ASME BPVC IXASME В31.1ASME В31.3ASME В16.34API 1104ODSOTSPE, article 19, article21.ODSONGTDPEIA, article 6,article 9, article 127, article216 b, zhNP-084-15NP-105-18ADR – items 6.2.1.5.1;6.2.1.5.2; 6.2.1.6.1;6.7.2.19.3; 6.7.2.19.4;6.7.2.19.5; 6.7.2.19.8;6.7.3.15.3; 6.7.3.15.4;6.7.3.15.5; 6.7.3.15.8;6.7.4.14.3; 6.7.4.14.4;6.7.4.14.8; 6.7.4.14.9;6.7.5.12.3; 6.7.5.12.4;6.7.5.12.6; 6.8.3.4.11;6.8.3.4.13; 6.8.3.4.15RID – items 6.2.1.5.1;6.2.1.5.2; 6.2.1.6.1;6.7.2.19.3; 6.7.2.19.4;6.7.2.19.5; 6.7.2.19.8;6.7.3.15.3; 6.7.3.15.4;6.7.3.15.5; 6.7.3.15.8;6.7.4.14.3; 6.7.4.14.4;6.7.4.14.8; 6.7.4.14.9;6.7.5.12.3; 6.7.5.12.4;6.7.5.12.6; 6.8.3.4.11;6.8.3.4.13; 6.8.3.4.15ADN- part 6(ADR- items 6.2.1.5.1;6.2.1.5.2; 6.2.1.6.1;6.7.2.19.3; 6.7.2.19.4;6.7.2.19.5; 6.7.2.19.8;6.7.3.15.3; 6.7.3.15.4;6.7.3.15.5; 6.7.3.15.8;6.7.4.14.3; 6.7.4.14.4;6.7.4.14.8; 6.7.4.14.9;6.7.5.12.3; 6.7.5.12.4;6.7.5.12.6;6.8.3.4.11; 6.8.3.4.13;6.8.3.4.15)TSBDS EN 286-1BDS EN 286-2BDS EN 286-3BDS EN 286-4BDS EN 334 А1BDS EN 10213 А1BDS EN 10216-1BDS EN 10216-2BDS EN 10216-3BDS EN 10216-4BDS EN 10216-5BDS EN 12542BDS EN 12732 А1BDS EN 12952-5BDS EN 12952-6BDS EN 12953-5BDS EN 13445-5BDS EN 13458-2BDS EN 13480-5BDS EN 14163BDS EN 14197-2EA BASOf new and/orin service/operationobjects/equipment/productsType, size and locationof imperfections,deviation in geometricdimensionsVisual inspectionRPK VT-05-03RPK VT-05-04GOST R 50.05.08BDS EN ISO 17637BDS EN 13018BDS EN 1370ISO 13847BDS EN ISO 3183ASME BPVC V Article
dated: 08.10.2019. valid until: 30.09.2023. . asme bpvc v article 5 asme b 16.34 astm e114 astm e164 astm e213 astm e273 astm e587 astm e1901 astm e2192 astm e2223 astm e2375 astm a388/a388m astm a435/a435m bd
Billericay Dental Supply Co. Ltd Birds (Derby) Ltd Blackpool Pleasure Beach (Holdings) Ltd Bloom and Wild Ltd BOC Ltd Boohoo.Com UK Ltd Booker Group Ltd Borax Europe Ltd Borden International Holdings Ltd Bowman Ingredients Ltd BP International Ltd Brake Bros Ltd Brand Addition Ltd Brand-Rex Ltd Brenntag UK Ltd Bridport Ltd Brightstar 20:20 UK Ltd
Hardness testing Manual tablet testing system MultiTest 50 6 Operating a manual tablet tester has never been easier. The intuitive icon-based EasyTouchTM user interface sets new standards for fast and user-friendly control. Three different test modes allow using the MultiTest 50 according to individual requirements. EasyTouchTM
Schreiber Dynamix Dairies Ltd. Satara Roller Flour Mills Ltd. Riddhi Siddhi Gluco Biols Ltd. SA Rawther Spices Ltd. PAN Foods Ltd. Shri Ambe Food Products Pvt. Ltd. Meenakshi Agro & Flour Mills Pvt Ltd. Jain Irrigation Ltd. Manokamna Food Products (P) Ltd. Griffith Laboratories Pvt. Ltd. Everton Tea, Italy Ltd. Novozymes India Ltd.
M/s G.M. Kapadia & Co., Chartered Accountants Bankers HDFC Bank Ltd. (Primary Banker) Axis Bank Ltd. Bank of Baroda Bandhan Bank Ltd. Citibank N.A. CSB Bank Ltd. DCB Bank Ltd. Deutsche Bank ESAF Small Finance Bank ICICI Bank Ltd. IDFC Bank Ltd. Indian Bank RBL Bank Ltd. Saraswat Co-op Bank Ltd. State Bank of India Suryoday Small Finance Bank Ltd.
Airborne Environmental Consultants Ltd AGR Automation Ltd Airswift AJT Engineering Ltd AKRI Limited Ale Heavylift Alexander Comley Ltd Allspeeds Ltd Al-Met Limited Altran UK Holding Ltd AM Sensors Ltd Amari Copper Alloys Ltd Amarinth Ltd Ambix NDT Ltd AMEC Amelec Technical Solutions Ltd AMT-Sybex
HORIBA: ABX Micros 45 Unidirectional: Hematology ABX Micros 60: Unidirectional Hematology: ABX Micros ES 60 Unidirectional: Hematology ABX Micros CRP: Unidirectional Multitest: ABX Micros CRP 200 ( ABX e-Sat) Unidirectional Multitest:
6 Inputs 6 Outputs Options Column gaiter Safety guard available upon request MultiTest-xt 0.5 1 2.5 5 10 25 50 TEST FRAME Rated capacity N 500 1000 2500 5000 10000 25000 50000 kgf 50 100 250 500 1000 2500 5000 lbf 110 220 550 1100 2200 5500 11000 Number of ballscrews 1 1 1 1 2 2 2 Speed range
Unit 2 Phonics and reading 1.Choose the picture that matches the vowel team word CSK 2.Complete the vowel team words E68 3.Complete the word with the correct vowel team HTK 4.Choose the vowel team sentence that matches the picture DJD 5.Choose the r-control word that matches the picture VVD 6.Complete the word with the correct r-controlled vowel: ar, er, ir, or, ur PLR 7.Complete the word with .
