RACK MOUNT CHASSIS SYSTEM - Ron Nunes Enterprises
RACK MOUNT CHASSIS SYSTEMTHE 17" STANDARD RACK MOUNT CHASSIS SYSTEM COVERS A RANGE OF ASSEMBLIES WITH PANELSOF 1 3/4" TO 15 3/4"IN HEIGHT.DEPTHS ARE PROVIDED IN 8", 14" AND 20" VERSIONS.ASSEMBLIES ARE ALSO AVAILABLE IN PANEL HEIGHTS OF 171/2", 19 1/4" AND 21" WITH ASTANDARD MAXIMUM DEPTH CONFIGURATION OF 26". CUSTOM DEPTHS AVAILABLE UPON REQUEST.The 17" Standard Chassis is configured for Standardized 19" RacksThe complete chassis assembly includes, 1ea. front panel,1ea. rear panel, 2ea. side brackets and 2ea. covers.All fastening hardware and 2ea. front panelmounted handles complete the assembly.Each Chassis System is provided unassembled.Assembled systems are available upon request.COMPONENTSCHASSIS COMPONENTS ARE AVAILABLE ON AN INDIVIDUAL BASIS.ACCESSORIESChassis Accessories include Angle Brackets, Chassis Plates,Support Bars and Side mounted Chassis Slides.FOR SALES SERVICE, ORDER ENTRY AND ENGINEERING1- 877- 800- RACK
SPECIFICATIONSRACK MOUNT CHASSIS SYSTEMCHASSIS SYSTEM CONFORMS TO EIA-310d
SPECIFICATIONSMATERIAL: ALUMINUM SHEET .125 THICKALLOY:6061-T6 PER QQA 250/11 & ASTM B209
SPECIFICATIONSMATERIAL: ALUMINUM SHEET .125 THICKALLOY:6061-T6 PER QQA 250/11 & ASTM B209
CHASSIS SYSTEM ORDERINGOrdering the Chassis System of your choice is Simple.Just pick up the phone and call 1- 877- 800- RACKorFax your order to 925-371-0221orContact us via Email at www.RonNunes.comTo order, specify SKUS’ as shown in the examples below;Example: To order a 7U high chassis, 14" deep,with 2 each solid covers and 14" chassis slides;Example: To order a 7U high chassis, 14" deep, with 2 each solid covers, chassisplate mounting angle brackets, center bar support, 131/2" long full width chassisplate and 14" chassis slides;
CHASSIS ASSEMBLIES8" DEPTHRACKHEIGHT(IN)1U1.7502 EACHSOLIDCOVERSSKUC1812 EACHPERFORATEDCOVERSSKUC1821 EACH SOLID COVER1 EACH PERF CVR.SKUC1831 EACH SOLID CVR.1 EACH PERFPARTIAL GRID CVR.SKUC1842 EACH1 EACH PERF CVR.PERFORATED1 EACH PERFPARTIAL GRIDPARTIAL 750C981C982C983C984C985C986CUSTOM APPLICATIONS AVAILABLE UPON REQUESTSLIDE APPLICATIONS AVAILABLE UPON REQUEST
14" DEPTHRACKHEIGHT(IN)1U1.7502 EACHSOLIDCOVERSSKUC11412 EACHPERFORATEDCOVERSSKUC11421 EACH SOLIDCOVER1 EACH PERF CVR.SKUC11431 EACH SOLID CVR.1 EACH PERFPARTIAL GRID CVR.SKUC11441 EACH PERF CVR.1 EACH PERFPARTIAL GRID CVR.SKUC11452 EACHPERFORATEDPARTIAL C9144C9145C9146CUSTOM APPLICATIONS AVAILABLE UPON REQUESTSLIDE APPLICATIONS AVAILABLE UPON REQUEST
20" DEPTHRACKHEIGHT(IN)1U1.7502 EACHSOLIDCOVERSSKUC12012 EACHPERFORATEDCOVERSSKUC12021 EACH SOLIDCOVER1 EACH PERF CVR.SKU1 EACH SOLID CVR.1 EACH PERFPARTIAL GRID CVR.SKUC1203C12041 EACH PERF CVR.1 EACH PERFPARTIAL GRIDCVR.SKUC12052 EACHPERFORATEDPARTIAL GRID 4C9205C9206CUSTOM APPLICATIONS AVAILABLE UPON REQUESTSLIDE APPLICATIONS AVAILABLE. UPON REQUEST
26" DEPTHRACKHEIGHT(IN)2 EACHSOLIDCOVERSSKU1U1.750 C12612 EACHPERFORATEDCOVERSSKUC12621 EACH SOLID COVER1 EACH PERF CVR.SKUC12631 EACH SOLID CVR.1 EACH PERFPARTIAL GRID CVR.SKUC12641 EACH PERF CVR.1 EACH PERFPARTIAL GRID CVR.SKUC12652 EACHPERFORATEDPARTIAL C9264C9265C9266
ACCESSORIESACCESSORIESCHASSIS PLATE MOUNTING ANGLE BRACKETSACTUALLENGTH(IN)ANGLEBRACKETSKUCHASSIS PLATE CENTER SUPPORT PECIFIED26"CUSTOM APPLICATIONS AVAILABLE UPON REQUEST1 EACH CENTER SUPPORT BAR & 1 EACH ANGLE BRACKETREQUIRED WHEN UTILIZING HALF WIDTH CHASSIS PLATES.HARDWARE PACKAGES ARE SUPPLIED WITH CHASSIS PLATEANGLE BRACKETS TO INCLUDE ALL FASTENERS REQUIRED FORSIDE BRACKET MOUNTING.CUSTOM APPLICATIONS AVAILABLE UPONREQUEST1 EACH CENTER SUPPORT BAR & 1 EACH ANGLE BRACKETREQUIRED WHEN UTILIZING HALF WIDTH CHASSIS PLATES.HARDWARE PACKAGES ARE SUPPLIED WITH CENTERSUPPORT BAR TO INCLUDE ALL FASTENERS REQUIRED FORCHASSIS PLATE MOUNTING.SPECIFICATIONSMATERIAL: ALUMINUM SHEET .063 THICKALLOY: 5052-H32 PER QQA 250/8 & ASTM B209SPECIFICATIONSSTANDARD FINISH: CHEMICAL FILM PER MIL-C-5541ETYPE 1 CLASS 3 (GOLD)MATERIAL: EXTRUDED ALUMINUM RECTANGLE.375X.750ALLOY: 6061-T6 PER QQ-A-200/10 & ASTM B-221STANDARD FINISH: CHEMICAL FILM PER MIL-C-5541ETYPE 1 CLASS 3 (GOLD)
SPECIFICATIONSACCESSORIESCHASSIS PLATES HALF WIDTHMATERIAL: ALUMINUM SHEET.125 THICKALLOY: 5052-H32 PER QQA 250/8 & ASTM B2098.250" WIDTHSTANDARD FINISH: NONEACTUALLENGTH(IN)HALF WIDTHCHASSIS 105343120"8"CUSTOM APPLICATIONS AVAILABLE UPON REQUEST1 EACH CENTER BAR SUPPORT & 1 EACH ANGLE BRACKETREQUIRED WHEN UTILIZING HALF WIDTH CHASSIS PLATES
SPECIFICATIONSACCESSORIESCHASSIS PLATES FULL WIDTHWITHOUT CENTER SUPPORT BARMOUNTING FEATURESMATERIAL: ALUMINUM SHEET.125 THICKALLOY: 5052-H32 PER QQA 250/8 & ASTM B209STANDARD FINISH: NONE16.560" CHASSISDEPTH(MINIMUM)4.500FCP1 Δ534338"7.500FCP2 Δ534358"10.500FCP3 Δ5343714"13.500FCP4 Δ5343914"16.500FCP5 Δ5344120"19.500FCP6 Δ5344320"CUSTOM APPLICATIONS AVAILABLE UPONREQUESTCHASSIS PLATES FULL WIDTHWITH CENTER SUPPORT BARMOUNTING FEATURESΔ 2 EACH ANGLE BRACKETS REQUIRED WHEN UTILIZINGFULL WIDTH CHASSIS PLATES.16.560" CP5M5344020"19.500FCP6M5344220"2 EACH ANGLE BRACKETS& 1 EACH CENTER SUPPORT BARREQUIRED WHEN UTILIZING FULL WIDTH CHASSIS PLATESWITH CENTER SUPPORT BAR MOUNTING FEATURES.HARDWARE PACKAGES ARE SUPPLIED WITH FULL WIDTHCHASSIS PLATES TO INCLUDE ALL FASTENERS REQUIRED FORANGLE BRACKET MOUNTING.
CHASSIS 000S16FEATURESCHASSIS SLIDESSOLID BEARING SLIDES PROVIDE HIGH RESISTANCE TOSHOCK AND VIBRATION, AND ARE WELL SUITED FORMOBILE APPLICATIONS.CHASSIS SLIDES ARE TRI-SECTIONAL IN CONSTRUCTIONAND ALLOW FULL EXTENSION. THIS DESIGN WILL FIT ANYSTANDARDIZED RACK OR ENCLOSURE.18.000S18STANDARD FEATURES INCLUDE AUTOMATIC LOCK-OUTAND PUSHBUTTON LOCK RELEASE THAT PERMITS INSTANTCHASSIS REMOVAL FROM THE RACK.20.000S20THE PIVOT-LOCK DETENT SECTION PROVIDES SEVENPOSITIONS OF ROTATION FOR CONVENIENT ACCESS.22.000S2224.000S24CUSTOM APPLICATIONS AVAILABLE UPONREQUESTCHASSIS SLIDES ARE FURNISHED INPAIRS. 1 EACH RH & 1 EACH LH.HARDWARE PACKAGES ARE SUPPLIED WITH SLIDE PAIRS TOINCLUDE ALL FASTENERS REQUIRED FOR SIDE BRACKETMOUNTING.SLIM-LINE DESIGN PERMITS INSTALLATION OF STANDARD17"CHASSIS IN STANDARD 19" RACKS.QUICK AND EASY INSTALLATION IS ASSURED BY THE EASYTO READ ASSEMBLY INSTRUCTIONS THAT ACCOMPANYEACH SHIPMENT.STANDARD HARDWARE PACKAGES INCLUDE ALLFASTENERS NECESSARY FOR CHASSIS SLIDE MOUNTING.CONFORMANCE TO RIGID DIMENSIONAL REQUIREMENTSPROVIDES SMOOTH AND RELIABLE SLIDE ACTION WITHEACH USE.
SPECIFICATIONSCHASSIS SLIDESSLIDESKUAB(MIN)B(MAX)CDE(MIN)LOADE(MAX) CAPACITYS1212.00 14.56 14.56 11.00 5.506.506.50 175 LBS.S1414.00 16.25 16.75 13.00 7.006.507.00 175 LBS.S1616.00 19.00 19.63 15.00 8.886.507.13 175 LBS.S1818.00 21.00 23.63 17.00 8.886.509.13 175 LBS.S2020.00 23.00 27.63 19.00 8.886.50 11.13 175 LBS.S2222.00 26.25 31.63 21.00 9.756.88 12.25 175 LBS.S2424.00 28.25 34.63 23.00 9.757.88 14.25 175 LBS.All dimensions in inches unless stated otherwise
SPECIFICATIONSACCESSORIESCHASSIS HANDLESFRONT PANEL MOUNTINGRACK HEIGHT(IN)HANDLESKULLLNLSTK# 5975-CHASSIS HANDLESFRONT PANEL MOUNTINGMATERIAL: ALUMINUM EXTRUDED OVAL .28 X .62ALLOY:6061-T5 PER QQA 250/8 & ASTM B221STANDARD FINISH: ANODIZE PER MIL-A-8625ECLASS 2 TYPE 2 (BLACK)1U1.7502U3.500H250 Δ496993U5.250H425 Δ497004U7.000H600 Δ497015U8.750H775 Δ497026U10.500H950 Δ497037U12.250H600 Δ497018U14.000H775 Δ497029U15.750H950 Δ49703CUSTOM APPLICATIONS AVAILABLE UPON REQUESTCHASSIS HANDLES ARE AVAILABLE ON 1U/1.750" HEIGHTFRONT PANELS UPON REQUEST.Δ CHASSIS HANDLES ARE STANDARD WITH CHASSISASSEMBLIES.CHASSIS HANDLES ARE AVAILABLE AS PAIRS ( 2 EA.).HARDWARE PACKAGES ARE SUPPLIED WITH CHASSISHANDLES TO INCLUDE ALL FASTENERS REQUIRED FORFRONT PANEL MOUNTING.
SPECIFICATIONSACCESSORIESMATERIAL: ALUMINUM SHEET .125 THICKALLOY:6061-T6 PER QQA 250/11 & ASTM B209BLANK FRONT 837BFP7P494398U14.000BFP8UNSPECIFIED BFP8P494409U15.750BFP9UNSPECIFIED FP11UNSPECIFIED BFP11P4944312U21.000BFP12UNSPECIFIED BFP12P49444BFP10PCUSTOM APPLICATIONS AVAILABLE UPON REQUESTPAINTED FLAT GREY PER LLLNL SPECIFICATION LED 67-9092STANDARD UNPAINTED FINISH: CHEMICAL FILMPER MIL-C-5541ETYPE CLASS (GOLD)
Ordering the Chassis System of your choice is Simple.Just pick up the phone and call 1- 877- 800- RACKorFax your order to 925-371-0221orContact us via Email at www.RonNunes.comTo order, specify SKUS’ as shown in the examples below;Example: To order a 7U high Chassis, 14" deep, with 2 each SolidCovers and 14" Chassis Slides;Example: To order a 7U high Chassis, 14" deep, with 2 each SolidCovers, Chassis Plate Mounting Angle Brackets, Center Bar Support,131/2" long Full Width Chassis Plate and 14" Chassis Slides;
c181 c182 c183 c184 . alloy: 5052-h32 per qqa 250/8 & astm b209 . standard finish: chemical film per mil-c-5541e . type 1 class 3 (gold) accessories chassis plate center support bar. actual . length (in) center . bar . sku. lllnl . stk# 5975-chassis . depth (minimum) 1d . 8.000. cb1 53407. 8" 2d . 14.000. cb2 53408. 14" 3d . 20.000. cb3 53409. 20" 4d . 26.000. cb4 unspecified. 26" custom .
10 Hoop Rack Hoop Rack Heavy Duty Round Rack Arc Rack 11 Swerve Rack Bike Hitch Downtown Rack 12 Bike Bike Rack Cycle Dock 13 Helix Rack Hi Roller Campus Rack Rolling Rack CUSTOM BIKE RACKS 14 Full Custom Designs Image Infusion 15 Logo Racks Icon Hitch Type Rider Racks SPECIALTY RACKS 16 Event Rack Compack R
a Pelican-Hardigg Rack Mount Case. From the ultimate protection of the Classic Rack case, to the removable rack option offered by the SuperMAC Rack case, to the smaller footprints of the MAC Rack
2.0 RACK MOUNT INSTALLATION 1. Rack mount installation of the 3U POD is possible with the use of the rack mounting brackets (shipped with the 3U POD). See Figure 4. 2. The rack mounting brackets allow you to rack mount the 3U POD in a 19" enclosure (23" to 19" rack adapters would ha
www.symetrix.co 4 1/2 Rack Mounting Hardware and Cables 1/2 U Filler Panel Filler Panel Used with 19" 1U Rack Tray. 32 1/2 U Surface Mount Bracket Bracket for Surface-mounting Half-rack Units. 32 1 U Rack Tray 19" Rack Tray for Rack Mounting of Half-rack Units. 33 RCA to Euroblock Cable Adapter Cable for Consumer Devices like CDs and DVD Players. 33
Power distribution for rack-mount equipment APC offers a wide variety of Basic Rack Power Distribution Units (PDUs) that distribute power to rack-mount equipment. Horizontal and vertical units are available, as well as a variety of power inputs and outputs that fit most power environ-ments. APC now offers Basic Rack PDUs that mount vertically,
APC Smart-UPS Rack-Mount 2U User Manual Home » APC » APC Smart-UPS Rack-Mount 2U User Manual User Manual Smart-UPS Modular 1500/3000 VA 120/230 Vac Rack-Mount 2U Contents [ hide 1 Important Safety Messages 2 Product Handling Guidelines 3 Safety and General Information 4 Product Overview 5 Package Contents 6 Start-Up 7 Basic Operation
Model 301V lockers, Cycle-Safe’s Pro Park bicycle locker and Inverted U rack, Dero’s Rolling Rack and Hoop Rack, Madrax’s Heavy Duty Winder Rack, Creative Pipe’s CS Series and eLockers, and Thunderbolt rack, and Bike-Up’s Maximin Vertical rack and Ring Rack. The Associati
04 A0126 - Trash Rack 05 A0127 - Trash Rack 06 A0128 - Slotted Drain Detail 07 A0129 - Rib Stiffener Spacing for Steel Box Culverts 08 A0137 - Ladder Detail 09 A0138 - Trash Rack 10 A0139 - Trash Rack 11 A0141 - Cylinder Trash Rack 12 A0144 - Trash Rack 13 A0145 - Trash Rack 14 A0148 - Manhole Cover Detail 15 A0152 - Corrugated Metal Pipe
