INSTRUCTION MANUAL - Cloudinary
INSTRUCTION MANUALHD 6800C HD 6805C
This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594.IMPORTANT SAFETY INSTRUCTIONSWhen using an electrical appliance, basic safety precautions should always be followed, including thefollowing:Read all instructions before using this household sewing machine. Keep the instructions at a suitable placeclose to the machine. Make sure to hand them over if the machine is given to a third party.DANGER –TO REDUCE THE RISK OF ELECTRIC SHOCK: A sewing machine should never be left unattended when plugged in. The electrical socket, to which themachine is plugged in should be easily accessible. Always unplug this sewing machine from the electricoutlet immediately after using and before cleaning, removing covers, lubricating or when making any otheruser servicing adjustments mentioned in the instruction manual.WARNING –TO REDUCE THE RISK OF BURNS, FIRE,ELECTRIC SHOCK, OR INJURY TO PERSON: Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or nearchildren. Use this sewing machine only for its intended use as described in this manual. Use only attachmentsrecommended by the manufacturer as contained in this manual. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it hasbeen dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorizeddealer or service center for examination, repair, electrical or mechanical adjustment. Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewingmachine and foot control free from the accumulation of lint, dust, and loose cloth. Keep fingers away from all moving parts. Special care is required around the sewing machine needle. Always use the proper needle plate. The wrong plate can cause the needle to break. Do not use bent needles. Do not pull or push fabric while stitching. It may deflect the needle causing it to break. Wear safety glasses. Switch the sewing machine off (“0”) when making any adjustment in the needle area, such as threadingneedle, changing needle, threading bobbin, or changing presser foot, etc. Never drop or insert any object into any opening. Do not use outdoors. Do not operate where aerosol (spray) products are being used or where oxygen is being administrated. To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. The foot control is used to operate the machine. Never place other objects on the foot control. Do not use the machine if it is wet. If the LED lamp is damaged or broken, it must be replaced by the manufacturer or its service agent or asimilarly qualified person, in order to avoid a hazard.
If the cord connected with the foot control is damaged, it must be replaced by the manufacturer or itsservice agent or a similarly qualified person, in order to avoid a hazard. This sewing machine is provided with double insulation. Use only identical replacement parts. Seeinstructions for Servicing of Double-Insulated Appliances.SAVE THESE INSTRUCTIONSFOR CENELEC COUNTRIES ONLY:This appliance can be used by children aged from 8 years and above and persons with reduced physical,sensory or mental capabilities or lack of experience and knowledge if they have been given supervision orinstruction concerning use of the appliance in a safe way and understand the hazards involved. Children shallnot play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.The noise level under normal operating conditions is less than 80 dB.The machine must only be used with foot control of type C-8000 manufactured by Zeng Hsing, Taiwan.FOR NON CENELEC COUNTRIES:This sewing machine is not intended for use by persons (including children) with reduced physical, sensory ormental capabilities, or lack of experience and knowledge, unless they have been given supervision orinstruction concerning use of the sewing machine by a person responsible for their safety. Children should besupervised to ensure that they do not play with the sewing machine.The noise level under normal operating conditions is less than 80 dB.The machine must only be used with foot control of type C-8000 manufactured by Zeng Hsing, Taiwan.SERVICING OF DOUBLE INSULATED PRODUCTSIn a double-insulated product, two systems of insulation are provided instead of grounding. No ground meansis provided on a double-insulated product, nor should a means for grounding be added to the product.Servicing of a double-insulated product requires extreme care and knowledge of the system and should bedone only by qualified service personnel. Replacement parts for a double-insulated product must be identicalto those parts in the product. A double-insulated product is marked with the words ‘DOUBLE INSULATION’or ‘DOUBLE INSULATED’.
TABLE OF CONTENTSINTRODUCTION . 1Intended Use.1Machine Overview .1Needle Area Overview .2Top of Machine .2Overview Accessories.3Included Accessories (Not Pictured). 3Presser Feet .4Optional Accessories. 5Stitch Overview .6Utility Stitches . 6Decorative Stitches . 8PREPARATIONS . 9Unpacking the Machine.9Connect to the Power Supply .9Packing Machine after Sewing.9Free Arm/Removable Accessory Tray .10Presser Foot Lifter .10Thread Knife .10Spool Pin . 11Wind the Bobbin .12Insert the Bobbin .12Thread the Machine .13Needle Threader .14Needles .14Important Needle Information . 15Selection Guide — Needle Size, Fabric, Thread . 15Change the Needle.15Thread Tension .16Sew without Feed Teeth .16Presser Foot Pressure .16Change the Presser Foot .17OPERATING YOUR MACHINE . 18Machine Operation Controls .18Reverse Button . 18Start/Stop. 18Needle Up/Down. 18Tie-Off . 18Automatic Thread Cutter. 18Speed Control Lever . 18Stitch Control Panel .19Display. 19Stitch Menu / Sound On/Off . 19Stitch Width / Needle Position . 19Stitch Length . 19Stitch Selection Buttons. 19Sequence Controls . 20Automatic Stop Setting. 20Needle Up/Down Setting . 20Mirror Side to Side . 20Elongation . 20Sewing Mode .20Display — Sewing Mode . 20Select a Stitch . 21Sequence Mode .22Display in Sequence Mode . 22Create a Sequence . 22Sew Out a Sequence. 23SEWING. 24Sewing .24Start to Sew – Straight Stitch .24Change Needle Position . 24Change Sewing Direction .25Finish Sewing.25Straight Stretch Stitch .25Multi-Step Zigzag Stitch .26Slant Overedge Stitch .26Closed Overlock Stitch.27Blind Hems .27Darning and Mending.28Repair Large Holes . 28Repair Tears . 28Repair Small Holes . 29Jeans Hem.29Button Sewing .30One-Step Buttonhole .31Sew Zippers .32Centered Zipper . 32Hand-Look Quilt Stitch .33MAINTENANCE. 34Cleaning the Machine .34Cleaning the Bobbin Area.34Cleaning under the Bobbin Area .34Troubleshooting.35Technical Specification.38
INTRODUCTIONIntended UseOptimal use and maintenance are described in these instructions. This product is not intended for industrial use.Additional assistance, by region, may be found on the web at www.singer.com.Machine Overview789104116351221131. Feed Teeth Lever — move from side to side to engage ordisengage the feed teeth. Positioned at the back of the freearm.2. Accessory Tray / Free Arm — provides a flat surfacewhen sewing and allows storage for your accessories.Remove the accessory tray to use the free arm whichmakes it easier to sew, e.g., trouser hems and sleeves.3. Thread Knife — for trimming thread ends at the end ofsewing.4. Threading Slots — thread paths with tension discs andtake up lever.7. Presser Foot Pressure — controls the pressure the presserfoot exerts onto the fabric.8. Thread Tension Dial — set the right tension for yourstitch, thread and fabric.9. Machine Operation Controls — functions used to makeyour sewing more convenient (see page 18).10. Display — Current stitch and settings are displayed.11. Hand Wheel — used to manually control the movement ofthe needle and the thread take-up lever.5. Reverse Button — Press and hold to sew in reverse, e.g.,when securing the beginning or ending of a seam.12. Stitch Control Panel — Choose stitch menu, select stitchand adjust your stitch settings with these buttons. Here youalso find functions for sequencing, mirroring andelongation (see page 19).6. Start/Stop Button — Press to start and stop sewingwithout using the foot control.13. Stitch Charts — Slide forward and view all stitchesavailable on your machine.Introduction – 1English
Needle Area Overview1. Needle Plate — provides a flat area around presser footfor sewing. Guide lines make it easy to guide the fabricstraight when sewing.72. Feed Teeth — feed the fabric under the presser foot whensewing.8910111263. Presser Foot — holds fabric against feed teeth whichdraws fabric under the presser foot as you sew.544. Presser Foot Holder Screw — loosen the screw toremove the presser foot holder.131435. Presser Foot Holder — holds the presser foot.26. Presser Foot Release Lever — press this lever to releasethe presser foot from the holder.17. Buttonhole Lever — used for buttonhole sewing.8. Built-in Needle Threader — thread the needle quicklyand easily.9. Presser Foot Bar — accommodates the presser footholder.10. Needle Clamp Screw — secures the needle.11. Thread Guide — helps maintain thread flow when sewing.12. Needle Thread Guide — helps maintain thread flowwhen sewing.13. Bobbin Cover — protects the bobbin while sewing.14. Bobbin Cover Release Button — push to open the bobbincover.Top of Machine1. Bobbin winding tension disc22. Thread guides3. Handle4. Spool pin5. Hole for auxiliary spool pin6. Bobbin winding spindle17. Bobbin winding stopper8. Thread tension discs9. Thread take-up lever2 – IntroductionEnglish9834567
Overview AccessoriesBobbin x4 — Only use the type of transparent bobbins delivered with your machine (SINGER Class 15 transparent bobbins). One of the bobbins is inserted in the machine upon delivery.Felt Pad — Used to cushion the spool of thread when using the Auxiliary Spool Pin.Spool Cap — Two sizes (large and small) for various thread spool styles.Auxiliary Spool Pin — For sewing with large thread spools or when using specialty threads.Brush and Seam Ripper — Used to remove stitches/brush off lint.L-Screwdriver — Used to remove the needle plate, presser foot holder or needle screw.Edge/Quilting Guide — Used for straight and accurate sewing, e.g., when quilting. Insert the guideinto the slot at the back of the presser foot holder. Adjust the position to fit your project.Included Accessories(Not Pictured) Needles Foot control Power cord Soft coverIntroduction – 3English
Presser FeetAll Purpose Foot (T)(attached on the machine upon delivery)This foot is used for general sewing on most types of fabric. The bottom of the foot is flat, so that thefabric is held down firmly against the feed teeth while sewing. It also has a wide slot so that the needlecan move from left to right, depending on which stitch you sew.The foot has a “lock in place” button, the button is pushed to lock the foot in horizontal position whensewing over thick seams (see page 29).Blind Hem Foot (F)The Blind Hem Foot is used for sewing blind hems in fashions and home decor. There is an adjustableguide with an extension at the front, used to guide the fold of the hem while stitching.FZipper Foot (I)This foot is used for inserting zippers. Attach the foot to the presser foot holder on either side of thefoot, depending on which side of the zipper is being sewn. The Zipper Foot can also be used to createand insert piping.One–Step Buttonhole Foot (D)This foot allows you to make perfectly sized buttonholes for your button. It has a space at the back fora button, used to set the size of the buttonhole. The machine will automatically sew a buttonhole to fitthat button size.Satin Stitch Foot (A)This foot is used for satin stitches and other decorative stitches.HButton Sewing Foot (H)The Button Sewing Foot quickly and neatly sews on buttons, eliminating the need to sew themmanually.The foot sits on top of the button, with the opening positioned around the holes.Even Feed FootThe Even Feed Foot, sometimes called a Walking Foot, is used for sewing several layers of fabric,especially when quilting. It is also great for sewing fabrics with nap or pile to keep them from shiftingas you sew.4 – IntroductionEnglish
Sew Easy FootThis foot has a guide to help you sew the most accurate seams every time. The foot has an extensionmarked with the most popular seam allowances and a movable fabric guide that can be set whereveryou want for the project you are making.Cording FootThe Cording Foot is mainly used to add surface embellishment to fabrics. Lightweight cords areguided by grooves on top of the foot during stitching. Use a single cord in center as a method forgathering firmer fabrics.Open Toe FootThe Open Toe Foot is used for satin stitch appliqués and other decorative sewing.Optional AccessoriesAdditional optional accessories are available for your machine. Visit the SINGER website for more information.Introduction – 5English
Stitch OverviewUtility StitchesThe stitches described in the below chart are utility stitches, used mainly for utility sewing.The most frequently used stitches are printed next to the stitch selection buttons on the front of the machine (Stitch Menu 1). Thosestitches are selected by touching the corresponding button (if Menu 1 is active). Stitches on menu 2–4 are printed on the StitchCharts that can be pulled out at the bottom of the machine.When sewing, use a thread tension between 3–5. Always test sew on a piece of scrap fabric, and adjust the tension if necessary.ApplicationStraight StitchCenter PositionThe basic stitch used for sewing. The most common use for a straight stitch is to sewtwo pieces of fabric together.Straight StitchLeft PositionFor all types of sewing.Straight StretchStitchStronger than a regular straight stitch, on stretch knit fabrics, because it locks threetimes — forward, backward and forward again. Use it to reinforce seams ofsportswear and for curved seams which take a lot of strain.Stretch StitchFor seams in tricot and stretch fabrics.Zigzag StitchA very versatile stitch for decorative sewing, applique and attaching ribbons andtrims.Multi-StepZigzag StitchFinish seam allowances to prevent the fabric from unravelling. When seam finishing,the smaller step of the stitches will help keep fabric more flat than a regular zigzag.It can also be used for mending tears and sewing elastic.ReinforcedZigzag StitchFor joining fabric edge to edge or overlapping in leather. For decorative sewing.Overlock StitchSew seam and overcast in one step along the edge or trim later. For medium andmedium/heavy stretch fabrics.Blind HemStitchFSew hems that are practically invisible from the right side of the fabric. It is used forskirts, dresses, trousers, curtains etc, made with non-stretch fabrics.Stretch BlindHem StitchFSew hems that are practically invisible from the right side of the fabric. It is used forgarments and other projects made with stretch knit fabrics.Slant OveredgeStitch6 – IntroductionEnglishSeam and overcast in one step along the edge or trim later. For medium and heavystretch fabrics.
ClosedOverlock StitchSew decorative hems and overlapped seams, belts and bands. For medium/heavystretch fabrics.HoneycombStitchFor elastic insertion, decorative stitching, smocking, couching and hemming.Seam/OvercastStitchFSeam and overcast in one step along the edge or trim later. For light stretch and nonstretch fabrics.ButtonholeSew buttonholes on home decór, garments, crafts and more.RoundedBartackButtonholeFor light weight fabrics.RoundedBartackButtonhol
Bobbin x4 — Only use the type of transparent bobbins delivered with your machine (SINGER Class 15 transparent bobbins). One of the bobbins is inserted in the machine upon delivery. Felt Pad — Used to cushion the spool of thread when using the Auxiliary Spool Pin. Spool Cap — Two
PLC-5 Instruction Set Alphabetical Listing PLC-5 Instruction Set Alphabetical Listing For this Instruction: See Page: For this Instruction: See Page: For this Instruction: See Page: For this Instruction: See Page: ABL 17-51 CMP 3-3 JSR 13-12 RES 2-25 ACB 17-71 COP 9-20 LBL 13-5 RET 13-12 AC
de seguridad dadas en el manual de instrucciones - el uso incorrecto puede causar lesiones graves o mortales. Instruction Manual Manual de instrucciones. Instruction Manual 1 - 59 Manual de instrucciones 60 - 122. Original Instruction Manual Printed on chlorine-free paper Printing inks contain vegetabl
1. Deluxe Gazebo Instruction Manual Deluxe Gazebo Instruction Manual KC 42768531 1. Parts 2. WARNING. 2. COOL Spot BBQ Grill Gazebo 8ft x 5ft with Hard Top Instruction Manual COOL Spot BBQ Grill Gazebo 8ft x 5ft with Hard. 3. Wood Gazebo With Aluminum Roof YM12810X Installation And Operation Instruction Wood Gazebo With Aluminum Roof
Purpose of This Manual This instruction manual is intended to familiarize all personnel with the safe operation and maintenance procedures for the Greenlee DM-860A Digital Multimeter. Keep this manual available to all personnel. Replacement manuals are available upon request at no charge at www.greenlee.com. Do not discard this product or throw .
Five Meanings of Direct Instruction Barak Rosenshine. The opinions expressed herein do not necessarily reflect the position of the supporting . Direct instruction refers to instruction led by the teacher, as in “the teacher provided direct instruction in solving these problems.” But if one enters “direct instruction”
five days using either rich instruction or traditional instruction. Rich instruction consisted of . word meanings, depth of word knowledge, writing quality and number of target words used in . this study is based on the assumption that direct instruction, specifically, rich instruction, .
MI 020-360 Instruction, Wiring Guidelines for Foxboro FOUNDATION fieldbus Transmitters MI 020-369 Instruction - Pressure Seals MI 020-427 Instruction - Intrinsic Safety Connection Diagrams and Nonincendive Circuits MI 022-138 Instruction - Bypass Manifolds - Installation and Maintenance MI 022-335 Instruction - Model CO Compact Orifice
notice d'instruction - instruction manual - manual de instrucciones manual de instruÇÕes - istruzioni per l'uso - gebruiksaanwijzing instrukcja obsŁugi - figyelem - РЪКОВОДСТВО kasutusjuhend - ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ - nÁvod k pouŽitÍ upute za uporabu - instrucȚiuni de utilizare - instrukcija - تاميلعتلا بيتك
