Bolt Torque Values - CANFLEX Spiral Wound RW
THOMSON PERFORMANCE SEALINGBolt Torque Values - CANFLEX Spiral Wound RWASME B16.20 CANFLEX Spiral Wound RW Gaskets on ASME B16.5 FlangesRecommended Bolt Torque (ft-lbs.)150 lb.300 lb.400 lb.600 lb.900 lb.1500 lb.2500 lb.Flange ---ASME B16.5 Flange Bolt Arrangement150 lb.Flange Size(in.)300 lb.400 lb.600 lb.900 lb.1500 lb.2500 lb.No. ofBoltsBoltSize(in.)No. ofBoltsBoltSize(in.)No. ofBoltsBoltSize(in.)No. ofBoltsBoltSize(in.)No. ofBoltsBoltSize(in.)No. ofBoltsBoltSize(in.)No. -NOTES: 1) 60 ksi design bolt stress is used for calculation. 2) Assuming new, non-coated and well lubricated bolts are used at room temperature; nut factor K 0.18. 3) Assuming maximum internalpressure follows ASME B16.5 Pressure-Temperature rating tables. 4) Assuming ASME PCC-1 bolting pattern is followed. 5) Flange imperfections, rotation, and deflection are ignored. 6) Assuming flangemeets ASME B16.5 or B16.47 requirements. 7) Bolt torque values in above table are for reference only. User is responsible for applying appropriate bolt loads to properly seat the gasket. v3.0To contact your nearest branch, please visit WWW.ARTHOMSON.COMPage 1 of 6
THOMSON PERFORMANCE SEALINGBolt Torque Values - CANFLEX Spiral Wound RWASME B16.20 CANFLEX Spiral Wound RW Gaskets on ASME B16.47 Flanges - SERIES ARecommended Bolt Torque (ft-lbs.)150 lb.300 lb.400 lb.600 lb.900 lb.Flange 29262071621325417624375511266--ASME B16.47 Flange Bolt Arrangement - SERIES A150 lb.Flange Size(in.)No. ofBoltsBoltSize(in.)262830322428282834363840300 lb.No. 400 lb.No. 444444481-3/41-3/41-3/41-3/458486052600 lb.900 lb.No. ofBoltsBoltSize(in.)No. 83-1/2--NOTES: 1) 60 ksi design bolt stress is used for calculation. 2) Assuming new, non-coated and well lubricated bolts are used at room temperature; nut factor K 0.18. 3) Assuming maximum internalpressure follows ASME B16.5 Pressure-Temperature rating tables. 4) Assuming ASME PCC-1 bolting pattern is followed. 5) Flange imperfections, rotation, and deflection are ignored. 6) Assuming flangemeets ASME B16.5 or B16.47 requirements. 7) Bolt torque values in above table are for reference only. User is responsible for applying appropriate bolt loads to properly seat the gasket. v3.0To contact your nearest branch, please visit WWW.ARTHOMSON.COMPage 2 of 6
THOMSON PERFORMANCE SEALINGBolt Torque Values - CANFLEX Spiral Wound RWASME B16.20 CANFLEX Spiral Wound RW Gaskets on ASME B16.47 Flanges - SERIES BRecommended Bolt Torque (ft-lbs.)75 lb.150 lb.300 lb.400 lb.600 lb.900 lb.Flange 7104510451216136936494107------ASME B16.47 Flange Bolt Arrangement - SERIES B75 lb.Flange Size(in.)No. ofBoltsBoltSize(in.)262830323640444834363840150 lb.No. 83/43/43/44244464848364044505254565860300 lb.No. 400 lb.No. 56601-1/81-1/81-1/81-1/848521-1/41-1/4600 lb.900 lb.No. ofBoltsBoltSize(in.)No. 5/81-3/41-7/82202020202-1/22 1/4------40402-1/42-1/4------NOTES: 1) 60 ksi design bolt stress is used for calculation. 2) Assuming new, non-coated and well lubricated bolts are used at room temperature; nut factor K 0.18. 3) Assuming maximum internalpressure follows ASME B16.5 Pressure-Temperature rating tables. 4) Assuming ASME PCC-1 bolting pattern is followed. 5) Flange imperfections, rotation, and deflection are ignored. 6) Assuming flangemeets ASME B16.5 or B16.47 requirements. 7) Bolt torque values in above table are for reference only. User is responsible for applying appropriate bolt loads to properly seat the gasket. v3.0To contact your nearest branch, please visit WWW.ARTHOMSON.COMPage 3 of 6
THOMSON PERFORMANCE SEALINGBolt Torque Values - CANFLEX Spiral Wound RWI (with Inner Ring)ASME B16.20 CANFLEX Spiral Wound RWI Gaskets on ASME B16.5 FlangesRecommended Bolt Torque (ft-lbs.)150 lb.300 lb.400 lb.600 lb.900 lb.1500 lb.2500 lb.Flange -ASME B16.5 Flange Bolt Arrangement150 lb.Flange Size(in.)300 lb.400 lb.600 lb.900 lb.1500 lb.2500 lb.No. ofBoltsBoltSize(in.)No. ofBoltsBoltSize(in.)No. ofBoltsBoltSize(in.)No. ofBoltsBoltSize(in.)No. ofBoltsBoltSize(in.)No. ofBoltsBoltSize(in.)No. -NOTES: 1) 60 ksi design bolt stress is used for calculation. 2) Assuming new, non-coated and well lubricated bolts are used at room temperature; nut factor K 0.18. 3) Assuming maximum internalpressure follows ASME B16.5 Pressure-Temperature rating tables. 4) Assuming ASME PCC-1 bolting pattern is followed. 5) Flange imperfections, rotation, and deflection are ignored. 6) Assuming gasketmeets ASME B16.20 spiral wound gasket requirements and flange meets ASME B16.5 or B16.47 requirements. 7) Bolt torque values in above table are for reference only. User is responsible for applyingappropriate bolt loads to properly seat the gasket. v3.0To contact your nearest branch, please visit WWW.ARTHOMSON.COMPage 4 of 6
THOMSON PERFORMANCE SEALINGBolt Torque Values - CANFLEX Spiral Wound RWI (with Inner Ring)ASME B16.20 CANFLEX Spiral Wound RWI Gaskets on ASME B16.47 Flanges - SERIES ARecommended Bolt Torque (ft-lbs.)150 lb.300 lb.400 lb.600 lb.900 lb.Flange 3122182541887310165294337551177415021--ASME B16.47 Flange Bolt Arrangement - SERIES A150 lb.Flange Size(in.)No. ofBoltsBoltSize(in.)262830322428282834363840300 lb.No. 5860400 lb.No. 444444481-3/41-3/41-3/41-3/448521-3/41-3/4600 lb.900 lb.No. ofBoltsBoltSize(in.)No. S: 1) 60 ksi design bolt stress is used for calculation. 2) Assuming new, non-coated and well lubricated bolts are used at room temperature; nut factor K 0.18. 3) Assuming maximum internalpressure follows ASME B16.5 Pressure-Temperature rating tables. 4) Assuming ASME PCC-1 bolting pattern is followed. 5) Flange imperfections, rotation, and deflection are ignored. 6) Assuming gasketmeets ASME B16.20 spiral wound gasket requirements and flange meets ASME B16.5 or B16.47 requirements. 7) Bolt torque values in above table are for reference only. User is responsible for applyingappropriate bolt loads to properly seat the gasket. v3.0To contact your nearest branch, please visit WWW.ARTHOMSON.COMPage 5 of 6
THOMSON PERFORMANCE SEALINGBolt Torque Values - CANFLEX Spiral Wound RWI (with Inner Ring)ASME B16.20 CANFLEX Spiral Wound RWI Gaskets on ASME B16.47 Flanges - SERIES BRecommended Bolt Torque (ft-lbs.)75 lb.150 lb.300 lb.400 lb.600 lb.900 lb.Flange 97104510451216136948665476------ASME B16.47 Flange Bolt Arrangement - SERIES B75 lb.Flange Size(in.)No. ofBoltsBoltSize(in.)262830323640444834363840150 lb.No. 83/43/43/44244464848364044505254565860300 lb.No. 400 lb.No. 56601-1/81-1/81-1/81-1/848521-1/41-1/4600 lb.900 lb.No. ofBoltsBoltSize(in.)No. 5/81-3/41-7/82202020202-1/22 1/4------40402-1/42-1/4------NOTES: 1) 60 ksi design bolt stress is used for calculation. 2) Assuming new, non-coated and well lubricated bolts are used at room temperature; nut factor K 0.18. 3) Assuming maximum internalpressure follows ASME B16.5 Pressure-Temperature rating tables. 4) Assuming ASME PCC-1 bolting pattern is followed. 5) Flange imperfections, rotation, and deflection are ignored. 6) Assuming gasketmeets ASME B16.20 spiral wound gasket requirements and flange meets ASME B16.5 or B16.47 requirements. 7) Bolt torque values in above table are for reference only. User is responsible for applyingappropriate bolt loads to properly seat the gasket. v3.0To contact your nearest branch, please visit WWW.ARTHOMSON.COMPage 6 of 6
ASME B16.20 CANFLEX Spiral Wound RW Gaskets on ASME B16.5 Flanges Recommended Bolt Torque (ft-lbs.) Flange Size (in.) 150 lb. 300 lb. 400 lb. 600 lb. 900 lb. 1500 lb. 2500 lb. MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX 1/2 11 44 15 44 10 30 12 35 10 30
5mm bolt, nut 4.5-6 6mm bolt, nut 8-12 8mm bolt, nut 18-25 10mm bolt, nut 29-34 12mm bolt, nut 49-59 4mm screw 1.5-2.6 5mm screw 3.5-5 6mm screw 7-11 5mm flange bolt 3.6-6.9 6mm screw 7-11 5mm flange bolt 3.6-6.9 6mm flange bolt 10-14 8mm flange bolt 20-26 Bolt and nut 10mm flange bolt
FTA9000 FASTENER TORQUE-TENSION LOAD CELL OPERATION MANUAL 2 1.0 INTRODUCTION Fastener torque-tension load cells manufactured by PCB Load & Torque are designed to accurately measure tensile loads and thread torque on threaded fasteners. Input Torque : Torque applied to the fastener (either to the bolt head or nut). Bolt Tension : Bolt
68, SAE J429, ASTM A307, A325, A354, A449, and A490. Suggested Starting Torque Values C M Y CM MY CY CMY K Portland-Bolt-Bolt-Torque-Chart5.pdf 1 26-11-14 12:56. Title: Portland-Bolt-Bolt
Reset the torque wrench to the final torque value and tighten bolts to full torque using a cross bolt ci rcle sequence. 1. Finger tighten all bolts using the proper torque sequence. 2. Tighten snuggly with a torque wrench set to 1/2 t he required torque, using the proper torque sequence. 3. Tighten to recommended torque range listed on page 4.
Motor torque, load torque and selection of motors 2/43 2.1 Motor speed–torque curve Refer to Figure 2.1 where T st starting torque or breakaway torque. T m minimum, pull-in or pull-up torque. T po pull-out, breakdown or maximum torque, obtainable over the entire speed range.
hand, bring the bolt carrier with bolt to the rear as far as possible, and moving the bolt carrier forward a distance of 1 to 2 mm. Lift the rear portion of the bolt carrier and remove it together with the bolt from the receiver. 8. Remove the bolt from the bolt carrier. Take the bolt
Logarithmic Spiral: r aebθ A logarithmic spiral, equiangular spiral or growth spiral is a special kind of spiral curve which often appears in nature. The polar equation of the curve is r aebθ or θ b 1 ln(r/a). The spiral
The facts and extensive procedural history of Albert Woodfox’s case have been recounted time and again, but they bear repeatingsince they factored into theunconditional writ granted by the district court On April 17, 1972, . Correctional Officer Brent Millerof the Louisiana State Penitentiary in , Angola, Louisiana, was found murderedin the prison dormitory , havingbeen stabbed 32 times. The .
