Ground Support Equipment Current Stand Drawings
Ground Support EquipmentCurrent StandDrawingsLiftsafe Fall Protection Inc.Collection of Current Stand Drawings
Ground Support EquipmentAircraft Maintenance &Engine Access StandDrawingsDF071554-XXLiftsafe Fall Protection Inc.Collection of Current Stand Drawings
SIGNATUREREVISION HISTORYDESCRIPTIONISSUED FOR PRODUCTIONREV6.1DATEAPPROVEDC.R.143 3/8136 1/8139 1/16130DATE1/21/2016126 1/2109 15/16107 3/1697 3/897 1/898 7/87319 7/867 3/48315 7/815 7/800STAND @ 73 LADDER RETRACTEDSTAND @ 83 LADDER RETRACTED246 1/2239 1/4240 1/2231 3/8213 1/16208 9/16154 5/16152 7/8837371 3/871 3/80STAND @ 83 LADDER EXTENDED0Part No.STAND @ 73 LADDER EXTENDEDV00026LIFTSAFE ENGINEERING & SERVICE GROUP INC.GENERAL NOTES:Materials.Work Order No.Project:Customer & Location:ENG. ACCESS WITHSCISSORNext Assembly.Tolerance Unless Noted OtherwiseTHIS DRAWING AND THE INTELLECTUAL INFORMATION ON THIS DRAWING ARE THEPROPERTY OF LIFTSAFE ENGINEERING & SERVICE GROUP INC. AND MAY NOT BEREPRODUCED OR USED IN ANY MANNER WITHOUT OUR WRITTEN CONSENTwww.liftsafeinspections.comT. (519) 896-2430/1-800-977-2005,Email: info@liftsafeinspections.comF. (519) 896-2085-----1) ALL STRUCTURAL STEEL SECTIONS SHALL CONFORM TO CSA G40.21-50W2) ALL STEEL PLATE AND BAR SHALL CONFORM TO CSA G40.21-44W3) ALL WELDING SHALL CONFORM TO CSA W59 AND BE UNDERTAKEN BY AWELDER FULLY APPROVED BY THE CANADIAN WELDING BUREAU TO CSA W47DIVISION4) ALL WELDS TO BE SMOOTH AND FREE OF BURRS5) ALL WELDS TO BE 1/4" CONTINUOUS FILLET OR 1/4" EFFECTIVE THROAT FLAREBEVEL U.N.O.ANGLE1/2THIRD ANGLE PROJECTIONFRACTION1/16DECIMAL PLACES.XXX.XX.XINCHES.005.010.020Checked By:MILLIMETRES0.10.30.5Designed By:Drawn 6Description:SIZEBSCALE:N.T.SSHEET 1 OF 1DWG NO:DF071554-06REV6.1
SIGNATUREREVISION HISTORYDESCRIPTIONISSUED FOR PRODUCTIONREV6.1DATEDATE4/7/2016APPROVEDC.R.99 11/166019 3/89 13/16045 9/163167 13/16183 / 465781 15/1683143 1/898 5/1650 / 125883MAXIMUM73 STANDARD123 / 3122120 1/4134 1/4Part No.GENERAL NOTES:Materials.www.liftsafeinspections.comT. (519) 896-2430/1-800-977-2005,Email: info@liftsafeinspections.comF. (519) 896-2085-----Work Order No.Project:Customer & Location:Next Assembly.Tolerance Unless Noted OtherwiseTHIS DRAWING AND THE INTELLECTUAL INFORMATION ON THIS DRAWING ARE THEPROPERTY OF LIFTSAFE ENGINEERING & SERVICE GROUP INC. AND MAY NOT BEREPRODUCED OR USED IN ANY MANNER WITHOUT OUR WRITTEN CONSENTLIFTSAFE ENGINEERING & SERVICE GROUP INC.V020811) ALL STRUCTURAL STEEL SECTIONS SHALL CONFORM TO CSA G40.21-50W2) ALL STEEL PLATE AND BAR SHALL CONFORM TO CSA G40.21-44W3) ALL WELDING SHALL CONFORM TO CSA W59 AND BE UNDERTAKEN BY AWELDER FULLY APPROVED BY THE CANADIAN WELDING BUREAU TO CSA W47DIVISION4) ALL WELDS TO BE SMOOTH AND FREE OF BURRS5) ALL WELDS TO BE 1/4" CONTINUOUS FILLET OR 1/4" EFFECTIVE THROAT FLAREBEVEL U.N.O.ANGLE1/2THIRD ANGLE PROJECTIONFRACTION1/16DECIMAL PLACES.XXX.XX.XINCHES.005.010.020Checked By:MILLIMETRES0.10.30.5Designed By:Drawn G. ACCESSSTANDDescription:SIZEBSCALE:N.T.SSHEET 1 OF 1DWG NO:DF071554-07-08REV6.1
SIGNATUREREVISION HISTORYDESCRIPTIONISSUED FOR APPROVALREVAADATE129 1/4DATE3/7/2017APPROVEDC.R.163 3/8154 3/8APPROVAL62 7/16THIS DRAWING IS SUBMITTED FOR APPROVAL ONLY. THIS DRAWING IS NOTTO BE USED FOR CONSTRUCTION UNTIL APPROVED.CUSTOMER IS RESPONSIBLE FOR CONFIRMING THE DIMENSIONS ANDGENERAL LAYOUT, NOTING ANY EXISTING CONDITIONS THAT MAY AFFECTTHIS LAYOUT.38 7/8APPROVED AS DRAWNAPPROVED AS NOTEDREVISE AND RESUBMITBY:LADDER EXTENSIONLOCATIONDATE:TITLE:COMPANY:73731156 11/16214 5/16031037 13/1667 13/16207 1/8108 1/473 1/4122 1/4122 3/16178 5/8167 3/410 STEPSMAIN LICCYLINDER2 TSHPUPart No.V02774GENERAL NOTES:www.liftsafeinspections.comT. (519) 896-2430/1-800-977-2005,Email: info@liftsafeinspections.com F. (519) 896-2085-----1) ALL STRUCTURAL STEEL SECTIONS SHALL CONFORM TO CSA G40.21-50W2) ALL STEEL PLATE AND BAR SHALL CONFORM TO CSA G40.21-44W3) ALL WELDING SHALL CONFORM TO CSA W59 AND BE UNDERTAKEN BY AWELDER FULLY APPROVED BY THE CANADIAN WELDING BUREAU TO CSA W47DIVISION4) ALL WELDS TO BE SMOOTH AND FREE OF BURRS5) ALL WELDS TO BE 1/4" CONTINUOUS FILLET OR 1/4" EFFECTIVE THROAT FLAREBEVEL U.N.O.Work Order No.Project:Customer & Location:AMS 7XNext Assembly.Tolerance Unless Noted OtherwiseTHIS DRAWING AND THE INTELLECTUAL INFORMATION ON THIS DRAWING ARE THEPROPERTY OF LIFTSAFE ENGINEERING & SERVICE GROUP INC. AND MAY NOT BEREPRODUCED OR USED IN ANY MANNER WITHOUT OUR WRITTEN CONSENTLIFTSAFE ENGINEERING & SERVICE GROUP INC.Materials.0ANGLE1/2THIRD ANGLE PROJECTIONFRACTION1/16DECIMAL PLACES.XXX.XX.XINCHES.005.010.020Checked By:MILLIMETRES0.10.30.5Designed By:Drawn RDate:3/7/2017BSCALE:N.T.SSHEET 1 OF 1DWG NO:DF071554-07-10REVAA
REVISION HISTORYDESCRIPTIONDATE01/01/2019ISSUED FOR PRODUCTIONREV026 1/2 inAPPROVEDR.B.25 15/16 in224 1/2 in28 1/8 in75FULLYEXTENDED68 in108 1/4 in187 1/4 in52Part No.V03772LIFTSAFE ENGINEERING & SERVICE GROUP INC.Materials.1) ALL STRUCTURAL STEEL SECTIONS SHALL CONFORM TO CSA G40.21-50W2) ALL STEEL PLATE AND BAR SHALL CONFORM TO CSA G40.21-44W3) ALL WELDING SHALL CONFORM TO CSA W59 AND BE UNDERTAKEN BY AWELDER FULLY APPROVED BY THE CANADIAN WELDING BUREAU TO CSA W47DIVISION4) ALL WELDS TO BE SMOOTH AND FREE OF BURRS5) ALL WELDS TO BE 1/4" CONTINUOUS FILLET OR 1/4" EFFECTIVE THROAT FLAREBEVEL U.N.O.Work Order No.Project:Customer & Location:Next Assembly.Tolerance Unless Noted OtherwiseTHIS DRAWING AND THE INTELLECTUAL INFORMATION ON THIS DRAWING ARE THEPROPERTY OF LIFTSAFE ENGINEERING & SERVICE GROUP INC. AND MAY NOT BEREPRODUCED OR USED IN ANY MANNER WITHOUT OUR WRITTEN CONSENTwww.liftsafeinspections.comT. (519) 896-2430/1-800-977-2005,Email: info@liftsafeinspections.comF. (519) 896-2085-----GENERAL NOTES:ANGLE1/2THIRD ANGLE PROJECTIONFRACTION1/16DECIMAL PLACES.XXX.XX.XINCHES.005.010.020Checked By:Date:Description:Designed By:Date:SIZEMILLIMETRES0.10.30.5Drawn By:D.M.Date:01/28/2019B12 STEP ENGINE ACCESS STANDSCALE:N.T.SSHEET 1 OF 1REVDWG NO:DF071554-07-120
Ground Support EquipmentLanding Gear Access StandDrawingsDF071592-XXLiftsafe Fall Protection Inc.Collection of Current Stand Drawings
SIGNATUREDATE92 7/8 OA11 3/443 STROKE43 1/2 STROKE139 1/885 3/4DETAIL ASCALE 1 / 16A58 13/1643 1/8126665 5/875 13/1691 3/4Part No.LIFTSAFE ENGINEERING & SERVICE GROUP INC.Materials.www.liftsafeinspections.comEmail: info@liftsafeinspections.comWork Order No.Project:Customer & Location:Next Assembly.Tolerance Unless Noted OtherwiseTHIS DRAWING AND THE INTELLECTUAL INFORMATION ON THIS DRAWING ARE THEPROPERTY OF LIFTSAFE ENGINEERING & SERVICE GROUP INC. AND MAY NOT BEREPRODUCED OR USED IN ANY MANNER WITHOUT OUR WRITTEN CONSENTANGLE1/2THIRD ANGLE PROJECTIONFRACTION1/16DECIMAL PLACES.XXX.XX.XINCHES.005.010.020LIFTSAFE FALL PROTECTIONAYR, ON0.10.30.5WIDE BODY LANDING GEARSERVICING STANDC.R.Date:10/14/2016Description: FINAL ASSEMBLYDesigned By:G.R.Date:10/14/2016SIZEDrawn By:G.R.Date:10/14/2016BChecked By:MILLIMETREST. (519) 896-2430/1-800-977-2005,F. (519) 896-2085SCALE:N.T.SSHEET 1 OF 2DWG NO:DF071592-04REV4.0
Ground Support EquipmentWheel Well StandsDrawingsDF07556-XXLiftsafe Fall Protection Inc.Collection of Current Stand Drawings
SIGNATUREREVISION HISTORYDESCRIPTIONISSUED FOR PRODUCTIONREV3.0DATEDATE2/12/2016APPROVEDC.R.62 1/430.004044 3/84852 3/8DSECTION D-DSCALE 0.03 : 143143 1/2D127 1/489 3/4TO103 1/480 1/486 3/458105 1/26879 3/4WEIGHT: 1,200 LBS. APPROX.79 3/4Part No.105 1/2GENERAL NOTES:www.liftsafeinspections.comT. (519) 896-2430/1-800-977-2005,Email: info@liftsafeinspections.comF. (519) 896-2085Work Order No.Project:Customer & Location:Next Assembly.Tolerance Unless Noted OtherwiseTHIS DRAWING AND THE INTELLECTUAL INFORMATION ON THIS DRAWING ARE THEPROPERTY OF LIFTSAFE ENGINEERING & SERVICE GROUP INC. AND MAY NOT BEREPRODUCED OR USED IN ANY MANNER WITHOUT OUR WRITTEN CONSENTLIFTSAFE ENGINEERING & SERVICE GROUP INC.V01989Materials.1) ALL STRUCTURAL STEEL SECTIONS SHALL CONFORM TO CSA G40.21-50W2) ALL STEEL PLATE AND BAR SHALL CONFORM TO CSA G40.21-44W3) ALL WELDING SHALL CONFORM TO CSA W59 AND BE UNDERTAKEN BY AWELDER FULLY APPROVED BY THE CANADIAN WELDING BUREAU TO CSA W47DIVISION4) ALL WELDS TO BE SMOOTH AND FREE OF BURRS5) ALL WELDS TO BE 1/4" CONTINUOUS FILLET OR 1/4" EFFECTIVE THROAT FLAREBEVEL U.N.O.ANGLE1/2THIRD ANGLE PROJECTIONFRACTION1/16DECIMAL PLACES.XXX.XX.XINCHES.005.010.020Date:Checked By:CRMILLIMETRES0.10.30.5WHEEL WELL AND CARGO ACCESS STANDDescription:2/12/2016Date:Designed By:GRDrawn By:SIZE1/23/2016Date:ED2/12/2016BPLATFORM STAND WITH WINGSSCALE:N.T.SSHEET 1 OF 2DWG NO:REVDF071556-033.0
INSP.OUT-OUTHANDRAILS76PLATFORM WIDTH72FAB.SIGNATUREDATEREVISION HISTORYDESCRIPTIONDATEAPPROVED19/05/2016ISSUED FOR PRODUCTIONC.R.REV3.022BUMPER (3)PLATFORMDEPTH401960228076393636105 1/273TO10373TO103WEIGHT: 1,400 LBS. APPROX.92Part No.V02436GENERAL NOTES:LIFTSAFE ENGINEERING & SERVICE GROUP INC.Materials.1) ALL STRUCTURAL STEEL SECTIONS SHALL CONFORM TO CSA G40.21-50W2) ALL STEEL PLATE AND BAR SHALL CONFORM TO CSA G40.21-44W3) ALL WELDING SHALL CONFORM TO CSA W59 AND BE UNDERTAKEN BY AWELDER FULLY APPROVED BY THE CANADIAN WELDING BUREAU TO CSA W47DIVISION4) ALL WELDS TO BE SMOOTH AND FREE OF BURRS5) ALL WELDS TO BE 1/4" CONTINUOUS FILLET OR 1/4" EFFECTIVE THROAT FLAREBEVEL U.N.O.www.liftsafeinspections.comEmail: info@liftsafeinspections.comWork Order No.ANGLE1/2THIRD ANGLE PROJECTIONFRACTION1/16DECIMAL PLACES.XXX.XX.XINCHES.005.010.020Checked By:0.10.30.5Designed By:C.R.Drawn By:WIDE PLATFORM WHEEL WELL CARGOACCESS 65/11/20115/19/2016T. (519) 896-2430/1-800-977-2005,F. (519) 896-2085Project:Customer & Location:Next Assembly.Tolerance Unless Noted OtherwiseTHIS DRAWING AND THE INTELLECTUAL INFORMATION ON THIS DRAWING ARE THEPROPERTY OF LIFTSAFE ENGINEERING & SERVICE GROUP INC. AND MAY NOT BEREPRODUCED OR USED IN ANY MANNER WITHOUT OUR WRITTEN CONSENT109TO139Description:SIZEBWIDE PLATFORM STANDSCALE:N.T.SSHEET 1 OF 1DWG NO:DF071556-03XPREV3.0
Ground Support EquipmentLanding Gear Change StandDrawingsDF071559-XXLiftsafe Fall Protection Inc.Collection of Current Stand Drawings
REMOVABLECOVER PLATE54" INSIDE28"11"ALUMINUM DIAMOND STYLE STEPS56 5/16" WITH HANDRAILSANTISLIP ALUMINUM PLATE;GRATING WITH HOLES STYLEREVAB73 5/16" OA1/4"11"REVISION HISTORYDESCRIPTIONRELEASE FOR APPROVALREVISED PER CUSTOMER RAILS RETRACTEDHANDRAILS EXTENDED22 1/4"120 1/4" TWO PLATFORMS AFTER CONNECTION2 1/16" HIGH ON WHEELS36 1/16"62 15/16"196 1/4" OANOTES:TWO ALUMINUM STYLE PLATFORMS 500 LBSCAPACITY EACHALUMINUM FRAMEAPPROVALCUSTOMER IS RESPONSIBLE FOR CONFIRMING THE DIMENSIONS ANDGENERAL LAYOUT, NOTING ANY EXISTING CONDITIONS THAT MAY AFFECTTHIS LAYOUT.APPROVED AS DRAWN50 1/2"EXTENDED JACKSAPPROVED AS NOTEDREVISE AND RESUBMITDATE:BY:TITLE:13" JACKS STROKECOMPANY:16 1/2" ON RISED JACKS77 3/8"EXTENDED JACKSTHIS DRAWING IS SUBMITTED FOR APPROVAL ONLY. THIS DRAWING IS NOTTO BE USED FOR CONSTRUCTION UNTIL APPROVED.REMOVABLECOVER PLATESTORAGEModel No. :LIFTSAFE ENGINEERING & SERVICE GROUP INC.Work Oder No.Ref. Drawing:Project:Customer & Location:Part No.LIFTSAFE FALL PROTECTIONAYR, ONTARIOTolerance Unless Noted OtherwiseTHIS DRAWING AND THE INTELLECTUAL INFORMATION ON THIS DRAWING ARE THEPROPERTY OF LIFTSAFE ENGINEERING & SERVICE GROUP INC. AND MAY NOT BEREPRODUCED OR USED IN ANY MANNER WITHOUT OUR WRITTEN CONSENTwww.liftsafeinspections.comT. (519) 896-2430/1-800-977-2005,Email: info@liftsafeinspections.comF. (519) 896-2085-ANGLE1/2THIRD ANGLE PROJECTIONFRACTION1/16DECIMAL PLACES.XXX.XX.XINCHES.005.010.020Checked By:MILLIMETRES0.10.30.5Designed By:Drawn By:R.B.G.RG.RDate:Date:Date:SEP. 18.2014SEP. 11.2014SEP. 18.2014B737 MAIN LANDING GEAR STANDCAP. 500 LBSDescription:SIZEBSCALE:N.T.S.SHEET 1 OF 1REVDWG NO:14-3355-ASSY-GAB
Ground Support EquipmentTire TrailersDrawingsDF081002-XXLiftsafe Fall Protection Inc.Collection of Current Stand Drawings
Ground Support EquipmentAircraft Entry StandsDrawingsDF101580-XXLiftsafe Fall Protection Inc.Collection of Current Stand Drawings
7'-1 7/8"EDETAIL KSCALE 1 / 10DETAIL HSCALE 1 / 10GFH2'- 3/4"8 11/16K11'-7 1/8"COLLAPSED20'-3 3/16"EXTENDED16'-10 3/16"COLLAPSEDLJF3'-10 3/4"20'-3 3/16"DETAIL LSCALE 1 / 10SECTION F-FSCALE 1 / 20G7'-9 1/2"SECTION G-GSCALE 1 / 2013'-6 3/4"E6'-8 1/2"SECTION E-ESCALE 1 / 20DETAIL JSCALE 1 / 10
Ground Support EquipmentNose Cowl DollyDrawingsDF071560-XXLiftsafe Fall Protection Inc.Collection of Current Stand Drawings
654321REVISION HISTORYREVAADESCRIPTIONISSUED FOR FABRICATIONDATEAPPROVED9/23/2019R.BDD12 inPAD SIZE81 1/2 in23 1/2 in40 1/4 inCC63 3/4 in95 1/4 in107 1/2 in26 inB15 in MINCLEARANCEUNDER COWL30 1/2 inTO63 1/2 inB29 3/4 inPart No. :DF071560-01LIFTSAFE ENGINEERING & SERVICE GROUP INC.Materials.www.liftsafeinspections.comT. (519) 896-2430/1-800-977-2005,F. (519) 896-2085Email: info@liftsafeinspections.comWeight:150 lbA*SHOWN COLLAPSEDTolerance Unless Noted OtherwiseTHIS DRAWING AND THE INTELLECTUAL INFORMATION ON THIS DRAWING ARE THEPROPERTY OF LIFTSAFE ENGINEERING & SERVICE GROUP INC. AND MAY NOT BEREPRODUCED OR USED IN ANY MANNER WITHOUT OUR WRITTEN CONSENT6ANGLEFRACTIONDECIMAL PLACESINCHESChecked By:MILLIMETRESDesigned By:1/2THIRD ANGLE n By:3AProject:Customer & Location:Work Order No:DF071560-01 NOSE COWL 1610/23/2019Description:SIZEBDF071560-01 NOSE COWL DOLLYSCALE:1/20SHEET 1 OF 1REVDWG NO:DF071560-011AA
Ground Support EquipmentCabin Interior Access StandsDrawingsDF071553-XXLiftsafe Fall Protection Inc.Collection of Current Stand Drawings
1612"4758"3618"CABIN ACCESS STANDCOLLAPSED POSITIONCABIN ACCESS STANDOPERATION POSITION15"CABIN ACCESS STAND
Ground Support EquipmentMaintenance PlatformsDrawingsLiftsafe Fall Protection Inc.Collection of Current Stand Drawings
WM-001
1) all structural steel sections shall conform to csa g40.21-50w 2) all steel plate and bar shall conform to csa g40.21-44w 3) all welding shall conform to csa w59 and be undertaken by a welder fully approved by the canadian welding bureau to csa
(Loaders), Tractors and Tractor Towed Equipment (PTO Driven), Self-Propelled Riding Mowers, Walk-Behind Mowing Equipment as well as equipment for Turf Maintenance Equipment, Recreation Area Equipment (Golf), Aerator Equipment, Blower Equipment, Seeding Equipment, Spraying Equipment and other miscellaneous ground maintenance equipment.
megger test report. pt. radius sembilan utama. inspection & certification. 086/rds-ms/ut.bp/vi/2021. 4 report of megger test. ship's name : tb. karya star 6 place of inspection : samarinda date of inspection : juni, 30 - 2021 satuan mega ohm no r-ground s-ground t-ground j-ground k-ground u-ground v-ground w-ground remarks
Teachit Languages STAND 30 Televic Education STAND 20 TELL ME MORE STAND 36 UK-German Connection STAND 34 University of Cambridge International Examinations STAND 44 Vocab Express STAND 48 List of Exhibitors 113-119 Charing Cross Road, London, WC2H 0EB Telephone: 0203 206 2641 Email: grantandcutler@foyles.co.uk Web address: www.grantandcutler.com
Walk Stand Stand 1.5 0.5 Sitdown Stand Sit 1.5 — Standup Sit Stand 1.5 — Laydown Sit,stand Lay 1.5 — Getup Lay Sit,stand 1.5 .
The SE-601 is a microprocessor-based ground-fault relay for ungrounded dc systems. It provides sensitive ground-fault protection without the problems associated with nuisance tripping. Ground-fault current is sensed using an SE-GRM Series Ground-Reference Module—a resistor network that limits ground-fault current to 25 mA. The SE-601 is used
Ground Beef Round 11 32,765 255.00 - 275.00 264.32 Ground Beef Sirloin - Blended GB - Steer/Heifer/Cow Source - 10 Pound Chub Basis- Coarse & Fine Grind Blended Ground Beef 73% - Blended Ground Beef 75% 0 0 0.00 - 0.00 0.00 Blended Ground Beef 81% 0 0 0.00 - 0.00 0.00 Blended Ground Beef 85% - Blended Ground Beef
Ground Resistance Tester Models 3711 and 3731 - 6 - Description The Ground Resistance Tester, Models 3711 and 3731, measure ground rod and small grid resistance through any season, without the use of auxiliary ground rods. Clamp-on ground resistance testers are used in multi-grounded systems without disconnecting the ground under test.
GP-435,Volume I Engineering Drawing Practices,Volume I of II: Aerospace and Ground Support Equipment KSC-E-165 Electrical Ground Support Equipment Fabrication, Specification for KSC-SPEC-E-0002 Modular Electrical Enclosures, Racks,Consoles, and Accessories, Specification for KSC-SPEC-E-0020 AC Power Cable, Mineral-Insulated, 600-Volt,
