National Fire Protection Association

3y ago
86 Views
2 Downloads
331.77 KB
10 Pages
Last View : Today
Last Download : 3m ago
Upload by : Oscar Steel
Transcription

National Fire Protection Association1 Batterymarch Park, Quincy, MA 02169-7471Phone: 617-770-3000 Fax: 617-770-0700 www.nfpa.orgMEMORANDUMTO:Technical Committee on Manufactured HousingFROM:Elena Carroll, Project AdministratorDATE:June 6, 2016SUBJECT:NFPA 501 Second Draft Technical Committee FINAL Ballot Results(F2016 Cycle)According to the final ballot results, all ballot items received the necessary affirmative votes to passballot.146800Members Eligible to VoteMembers Not Returned (Bueche, Harman, Jones, Parks, Swiecicki, Tanner)Members Voted Affirmative on All RevisionsMembers Voted NegativeMembers AbstainedThe attached report shows the number of affirmative, negative, and abstaining votes as well as theexplanation of the vote for each revision.To pass ballot, each revision requires: (1) a simple majority of those eligible to vote and (2) anaffirmative vote of 2/3 of ballots returned. See Sections 3.3.4.3.(c) and 4.4.10.1 of the RegulationsGoverning the Development of NFPA Standards.

National Fire Protection Association entFetcher?commentPara.Second Revision No. 1-NFPA 501-2016 [ Section No. 14.3.13 ]1 of 96/6/2016 12:31 PM

National Fire Protection Association entFetcher?commentPara.14.3.13 ASTM Publications.2 of 96/6/2016 12:31 PM

National Fire Protection Association entFetcher?commentPara.ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959.ASTM A53/53M, Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded andSeamless, 2012.ASTM A74, Standard Specification for Cast Iron Soil Pipe and Fittings, 2013a.ASTM A539, Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and FuelOil Lines, 2009 1999 (withdrawn 2004 without replacement) .ASTM B42, Standard Specification for Seamless Copper Pipe, Standard Sizes, 2010 2015a .ASTM B43, Standard Specification for Seamless Red Brass Pipe, Standard Sizes, 2014 2015 .ASTM B88, Standard Specification for Seamless Copper Water Tube, 2014.ASTM B251, Standard Specification for General Requirements for Wrought Seamless Copper andCopper-Alloy Tube, 2010.ASTM B280, Standard Specification for Seamless Copper Tube for Air Conditioning and RefrigerationField Service, 2013.ASTM B306, Standard Specification for Copper Drainage Tube (DWV), 2013.ASTM C36/36M, Standard Specification for Gypsum Wallboard , 2003 (withdrawn, replaced byC1396/C1396M).ASTM 36M, Standard Specification for Gypsum Wallboard , 2003 (withdrawn, replaced byC1396/C1396M).ASTM C564, Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings, 2014.ASTM C920, Standard Specification for Elastomeric Joint Sealants, 2014a.ASTM C1396/C1396M, Standard Specification for Gypsum Board, 2014a.ASTM D781, Standard Test Methods for Puncture and Stiffness of Paperboard, and Corrugated and SolidFiberboard, 1968 (1973) (withdrawn 1984 without replacement).ASTM D2235, Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS)Plastic Pipe and Fittings, 2004 (2011).ASTM D2239, Standard Specification for Polyethylene (PE) Plastic Pipe, (SDR-PR) Based on ControlledInside Diameter, 2012a.ASTM D2564, Standard Specification for Solvent Cement for Poly (Vinyl Chloride) (PVC) Plastic PipingSystems, 2012.ASTM D2609, Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe,2002(2008) 2015 .ASTM D2661, Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 PlasticDrain, Waste, and Vent Pipe and Fittings, 2011 2014 .ASTM D2665, Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipeand Fittings, 2014.ASTM D2846/D2846M, Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hotand Cold-Water Distribution Systems, 2009b e1 2014 .ASTM D3309, Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water DistributionSystems, 1996a (2002) (withdrawn 2010 without replacement).ASTM D3311, Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings, 2011.ASTM D3953, Standard Specification for Strapping, Flat Steel, and Seals, 2013 2015 .ASTM D4442, Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-BaseMaterials, 2007 2015 .ASTM D4444, Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters , 2013.ASTM D4635, Standard Specification for Low-Density Polyethylene Films for General Use and PackagingApplications, 2008a.ASTM E84, Standard Test Method for Surface Burning Characteristics of Building Materials, 2014 2015a .3 of 96/6/2016 12:31 PM

National Fire Protection Association entFetcher?commentPara.ASTM E96/E96M, Standard Test Methods for Water Vapor Transmission of Materials, 2013 2015 .ASTM E119, Standard Test Method for Fire Tests of Building Construction and Materials, 2014 2015 .ASTM E136, Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750 C, 2012.ASTM E162, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat EnergySource, 2015a.ASTM E773, Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units, 2001(withdrawn 2010 without replacement).ASTM E773, Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units , 2001(withdrawn 2010 without replacement).ASTM E774, Standard Specification for the Classification of the Durability of Sealed Insulating GlassUnits, 1997 (withdrawn 2006 without replacement).ASTM E970, Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using aRadiant Heat Energy Source, 2014.ASTM E1333, Standard Test Method for Determining Formaldehyde Levels from Wood Products UnderDefined Test Conditions Using a Large Chamber, 2010 2014 .ASTM E2652, Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shapedAirflow Stabilizer, at 750 C, 2012.ASTM F438, Standard Specification for Socket-Type Chlorinated Poly (Vinyl Chloride) (CPVC) PlasticPipe Fittings, Sch. 40, 2009 2015 .ASTM F439, Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings,Sch. 80, 2013.ASTM F441/F441M, Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Sch. 40 and 80, 2013e1 2015 .ASTM F493, Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe andFittings Standard Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) PlasticPipe and Fittings , 2014. , 2010.ASTM F628, Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain,Waste, and Vent Pipe with a Cellular Core, 2012 e1 2015 .ASTM F628, Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 PlasticDrain, Waste, and Vent Pipe with a Cellular Core , 2012 e1.ASTM F876, Standard Specification for Crosslinked Polyethylene (PEX) Tubing, 2013a 2015 .ASTM F877, Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-WaterDistribution Systems, 2011a.ASTM F986, Standard Specification for Suction Strainer Boxes, 1986 (2014).ASTM F1281, Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene(PEX-AL-PEX) Pressure Pipe, 2011.ASTM FF1282, F1282 , Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE)Composite Pressure Pipe, 2010.ASTM F1807, Standard Specification for Metal Insert Fittings Utilizing Copper Crimp Ring for SDR 9Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing,2014 2015 .ASTM F1960, Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use withCrosslinked Polyethylene (PEX) Tubing, 2014 2015 .ASTM F1961, Standard Specification for Metal Mechanical Cold Flare Compression Fittings with DiscSprings for Crosslinked Polyethylene (PEX) Tubing, 2009.ASTM F1974, Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethyleneand Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe, 2009.ASTM F2080, Standard Specification for Cold-Expansion Fittings with Metal Compression Sleeves forCross-Linked Polyethylene (PEX) Pipe, 2012 e1 2015 .4 of 96/6/2016 12:31 PM

National Fire Protection Association entFetcher?commentPara.Submitter Information VerificationSubmitter Full Name: Allan FraserOrganization:National Fire Protection AssocStreet Address:City:State:Zip:Submittal Date:Wed Mar 16 11:54:33 EDT 2016Committee StatementCommittee Statement: Updates - also deleted two duplicatesResponse Message:Public Comment No. 8-NFPA 501-2015 [Section No. 14.3.13]Ballot ResultsThis item has passed ballot14 Eligible Voters6 Not Returned8 Affirmative All0 Affirmative with Comments0 Negative with Comments0 AbstentionNot ReturnedBueche, David G.Harman, Thomas L.Jones, Christopher P.Parks, RobertSwiecicki, Bruce J.Tanner, Larry J.Affirmative AllBenn, FredHarbuck, Stanley C.Hunter, Dean C.Lake, JohnLoscheider, John V.Lubliner, MichaelMaltbie, Ty J.Vogt, Randy E.5 of 96/6/2016 12:31 PM

National Fire Protection Association entFetcher?commentPara.Second Revision No. 2-NFPA 501-2016 [ Section No. D.1.2.2 ]D.1.2.2 ASTM Publication Publications.ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959.ASTM E903, Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of MaterialsUsing Integrating Spheres, 1996, reinstated 2012 2012 .Submitter Information VerificationSubmitter Full Name: Allan FraserOrganization:National Fire Protection AssocStreet Address:City:State:Zip:Submittal Date:Wed Mar 16 11:55:56 EDT 2016Committee StatementCommittee Statement: updateResponse Message:Public Comment No. 9-NFPA 501-2015 [Section No. D.1.2.2]Ballot ResultsThis item has passed ballot14 Eligible Voters6 Not Returned8 Affirmative All0 Affirmative with Comments0 Negative with Comments0 AbstentionNot ReturnedBueche, David G.Harman, Thomas L.Jones, Christopher P.Parks, RobertSwiecicki, Bruce J.Tanner, Larry J.Affirmative AllBenn, Fred6 of 96/6/2016 12:31 PM

National Fire Protection Association entFetcher?commentPara.Harbuck, Stanley C.Hunter, Dean C.Lake, JohnLoscheider, John V.Lubliner, MichaelMaltbie, Ty J.Vogt, Randy E.7 of 96/6/2016 12:31 PM

National Fire Protection Association entFetcher?commentPara.Second Revision No. 3-NFPA 501-2016 [ Section No. D.1.2.4 ]D.1.2.4 ICC Publication Publications.International Code Council, 5203 Leesburg Pike, Suite 600, Falls Church, Virginia 22041.ICC 500, Standard for the Design and Construction of Storm Shelters,2008 2013 .Submitter Information VerificationSubmitter Full Name: Allan FraserOrganization:National Fire Protection AssocStreet Address:City:State:Zip:Submittal Date:Wed Mar 16 11:56:27 EDT 2016Committee StatementCommittee Statement: updateResponse Message:Public Comment No. 10-NFPA 501-2015 [Section No. D.1.2.4]Ballot ResultsThis item has passed ballot14 Eligible Voters6 Not Returned8 Affirmative All0 Affirmative with Comments0 Negative with Comments0 AbstentionNot ReturnedBueche, David G.Harman, Thomas L.Jones, Christopher P.Parks, RobertSwiecicki, Bruce J.Tanner, Larry J.Affirmative AllBenn, Fred8 of 96/6/2016 12:31 PM

National Fire Protection Association entFetcher?commentPara.Harbuck, Stanley C.Hunter, Dean C.Lake, JohnLoscheider, John V.Lubliner, MichaelMaltbie, Ty J.Vogt, Randy E.9 of 96/6/2016 12:31 PM

ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. . Second Revision No. 2-NFPA 501-2016 [ Section No. D.1.2.2 ] D.1.2.2ASTM PublicationPublications. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. ASTM E903, Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using .

Related Documents:

FIRE TOPPER Fire Bowl User Manual Home » FIRE TOPPER » FIRE TOPPER Fire Bowl User Manual Contents [ hide 1 FIRE TOPPER Fire Bowl 2 Setting Up Your Fire Topper Fire Bowl 2.1 Set-Up 3 Placement and Location 3.1 Liquid Propane Tank 4 Using your Fire Topper Fire Bowl - For your safety, read before lighting. 5 Cleaning, Maintenance, Storage 6 .

social or cultural context (livelihoods, festivals, traditional, conflict) and perhaps regulatory framework (permit fires, illegal fires). The terms include fires, wildfires, wildland fire, forest fire, grass fire, scrub fire, brush fire, bush fire, veldt fire, rural fire, vegetation fire and so on (IUFRO 2018). The European Forest Fire

Appendix B: Glossary of Terms A p p e n d i x B-G l o s s a r y o f T e r m s Fire Depletion Area Burned: Fire Impacts: Fire Intensity: Fire Load: Fire Management: Fire Management Zone: Fire Prevention: Fire Protection: Fire Regime: Fire Risk: Area burned that directly impacts wood supply to the forest industry. This could include allocated .

Florez Jennifer 166204283 3/14/2022 Denver Fire Department Denver Fire Department Fire Inspector II Florez Joseph 196209071 9/29/2022 Denver Fire Department Denver Building Department Fire Inspector II Foster Joel 186607830 12/27/2021 Canon City Area Fire Protection District Canon City Area Fire Protection District Fire Suppression System Inspector

Fire Protection Systems Cargo Compartment Fire Verification System - Image based fire/smoke detection (Video-detection) International Aircraft Systems Fire Protection Working Group. Meeting in London on June 13-14th, 2002. Klaus Schmoetzer. Airbus, Dept. ECYM. Fire Protection & Conveyance Systems. 28183 Bremen / Germany. E-mail: klaus .

National Fire Protection Association standard for electrical safety in the workplace. NFPA 70E National Fire Protection Association standard for protection of industrial personnel against flash fire. NFPA 2112 Single base layer of FR protection. Required minimum Arc Rating 4 cal/cm

National Fire Protection Association (NFPA) Level II. The state also requires 100 hours of annual in-service training. The fire department requires all fire fighters to complete a 13-week training program at the department’s fire academy.1 Recruit fire fighters are instructed in the basics of fire suppression systems and fire fighting tactics.

The Certified Fire Protection Specialist (CFPS) exam is a three hour open book exam consisting of 100 multiple choice questions taken from a bank of questions representing sections and chapters of the National Fire Protection Associations (NFPA) Fire Protection Handbook. The exam questions are taken exclusively from the NFPA Fire Protection