My Dreamy Dollhouse - KidKraft

My Dreamy DollhouseAssembly Instructions 2011 KidKraft, LPItem #65823Please retain this information for future referenceHARDWAREA. Blue Cross Dowel Boltx 4 pcs2 in / 52 mmTo order replacement parts, please visit www.kidkraft.comI. Espresso Large HeadScrew x 4 pcs3/4 in / 18 mmJ. Yellow Cross Dowel Boltx 2 pcsB. Cross Dowel Nut x 13 pcsPARTS LIST97/8 in / 22 mm121S. Light Blue Large HeadScrew x 13 pcsD. Hex Bolt x 2 pcs10K. White Cross Dowel Boltx 2 pcs7aT. Yellow Screw x 2 pcs21/2 in / 12 mmF. White Cross Dowel Boltx 2 pcs2 7/8 in / 72 mmG. Yellow Cross Dowel Boltx 2 pcs228163177/8 in / 22 mm3124283/4 in / 18 mmx253N. Pink Small Head Screwx 2 pcs1/2 in / 12 mmO. Espresso Small HeadScrew x 2 pcs1/2 in / 12 mm552752 x 2The following tool (notincluded) is required forassembly :51x254353433a395637 x 2Phillips screwdriver33b57x2443/8 in / 10 mm4038x32 7/8 in / 72 mm36434642c4142bQ. White Insert Bolt x 2 pcs7/8 in / 22 mmCAUTION:2930Allen Wrench x 1 pcP. White Screw x 7 pcsH. Pink Large Head Screwx 2 pcs2625x250321/2 in / 12 mm211947 x 348x2231815L. Pink Insert Bolt x 2 pcsM. Large Head Screw x 4 pcs13206141 9/16 in / 40 mm2 in / 52 mm7bx2x23/4 in / 18 mmV. White Screw x 27 pcsE. White Cross Dowel Boltx 1 pc54U. Screw x 4 pcs2 in / 52 mm11 x27/8 in / 22 mm1/2 in / 12 mmC. Yellow Cross Dowel Boltx 4 pcsR. Purple Screw x 4 pcsADULT ASSEMBLY REQUIRED. Hardware containssmall screws with sharp points. Keep unassembledparts out of the reach of small children.42aWARNING:If used improperly, your dollhouse may be pulled over or fall,creating risk of injury or damage. To minimize this risk,werecommend that you use the enclosed wall anchor kit, which givesyou the option of attaching the dollhouse to a wall. In addition,children should not be permitted to climb or pull on the dollhouse.USE AND MAINTENANCE:-Use on level surfaces only-Please check assembly at regular intervals, andfrequently tighten hardware if necessary. If maintenanceis not carried out, the product could cease to functionproperly.WARNING:CHOKING HAZARD. Small parts and sharppoints, not suitable for children under 3 years.Customer Service1-800-933-0771www.kidkraft.com1

My Dreamy DollhouseAssembly InstructionsItem #65823 2011 KidKraft, LPPiano AssemblyStep 1Bed AssemblyStep 1Dollhouse AssemblyStep 1Step 251R514R42c1333a42b52V52VV42aV33bR33bR33bStep 3VStep 4VVVStep 5VVStep 6Step 7VVH8SV8V4747VV50129V50VV47489HS7b7b7a7aBefore calling customer service, pleaselocate the batch code number(example: 2693/65006/04) found on thebottom or back of your product.Customer Service1-800-933-0771www.kidkraft.com2

My Dreamy DollhouseAssembly InstructionsItem #65823 2011 KidKraft, LPStep 8Step 9Step 1089*Be sure to match artwork onthese parts to match the artworkin each room of the dollhouse.3D526101B4CBEDC ABBABStep 11Step 12Step 13GStep 14Step 15I16GA12B1415 1711BI2019B21N22A11F22OBB18BFMMCustomer Service1-800-933-0771www.kidkraft.com3

My Dreamy DollhouseAssembly InstructionsItem #65823 2011 KidKraft, LPStep 16Step 17Step 18Step 19CB25P2656QPL13TQ23K57B57CKLInsert elevator slideinto track beforeattaching to dollhousewall.24JTJAdults can loosen ortighten the screws onpart 22 to adjust theelevator resistance.Step 20Step 21Step 22Step 23Step 2429SS31S2830S29P54S3055U5328VVUVDo not tighten Hardware “V”completely until after step 22.PPVP27PCustomer Service1-800-933-0771www.kidkraft.com4

My Dreamy DollhouseAssembly InstructionsItem #65823 2011 KidKraft, LPStep 25This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference thatmay cause undesired operation.Hang plant by attaching to bottom of roof (Part46) with hook and loop material.46SS32SNOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipmentdoes cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.- Consult the dealer or an experienced radio /TV technician for help.Customer Service1-800-933-0771www.kidkraft.com5

My Dreamy DollhouseAssembly InstructionsItem #65823 2011 KidKraft, LPPiano Battery Assembly InstructionsTo replace battery:Instructions for Use:Prior To Use:Step 2Step 1ButtonPull Tab- Locate the Battery Compartment underneath the piano(part 33)- Pull the tab outward to remove and activate play mode.- Three (3) LR44 / AG13 (1.5V) Batteries are included ineach piece.-Locate the Battery Compartmentunderneath the piano.- Sounds are activated when button is pressed.R-Use a Phillips head screwdriver andremove cover and set aside.- Replace old batteries with three (3) new LR44 / AG13(1.5V) batteries.- Be sure to insert new batteries with positive ( ) side up.- Rechargeable batteries are to be removed from the toybefore being charged.Toilet Battery Assembly InstructionsStep 3-Screw the cover back into place with aPhillips head screwdriver.Prior To Use:Instructions for Use:To replace battery:RStep 1ButtonBoutonPull TabBattery Tips:- Batteries should always be installed and changed under adult supervision.- Non-Rechargeable batteries are not to be recharged.- Rechargeable batteries are only to be charged under adult supervision.- Only batteries of the same equivalent type as recommended are to be used.- Batteries are to be inserted with the correct polarity.- Exhausted batteries are to be removed from the toy and disposed of properly.- The supply terminals are not to be short circuited.- Different types of batteries or new and used batteries are not to be mixed.- DO NOT mix alkaline, standard (carbon-zinc) or rechargeable batteries.- Locate the Battery Compartment on the back of thetoilet (part 44)- Pull the tab outward to remove and activate play mode.- Three (3) LR44 / AG13 (1.5V) Batteries are included ineach piece.-Locate the Battery Compartmenton the back of the toilet.- Sounds are activated whenbutton is pressed.-Use a Phillips head screwdriverand remove cover and set aside.RCustomer Service1-800-933-0771www.kidkraft.com6

My Dreamy DollhouseAssembly InstructionsItem #65823 2011 KidKraft, LPToilet Battery Assembly Instructions ContinuedStep 2Floor Lamp Battery Assembly InstructionsPrior To Use:Step 3Pull TabBattery Tips:- Replace old batteries with three (3) new LR44 / AG13(1.5V) batteries.- Be sure to insert new batteries with positive ( ) side up.- Rechargeable batteries are to be removed from the toybefore being charged.- Batteries should always be installed and changed under adult supervision.- Non-Rechargeable batteries are not to be recharged.- Rechargeable batteries are only to be charged under adult supervision.- Only batteries of the same equivalent type as recommended are to be used.- Batteries are to be inserted with the correct polarity.- Exhausted batteries are to be removed from the toy and disposed of properly.- The supply terminals are not to be short circuited.- Different types of batteries or new and used batteries are not to be mixed.- DO NOT mix alkaline, standard (carbon-zinc) or rechargeable batteries.To replace battery:Instructions for Use:Step 2Step 1-Locate the Battery Compartmentunderneath the piano.Button- Lights are activated when button is pressed.- Locate the Battery Compartment underneath the floorlamp (part 39)- Pull the tab outward to remove and activate play mode.- Three (3) LR44 / AG13 (1.5V) Batteries are included ineach piece.-Use a Phillips head screwdriverand remove cover and set aside.- Replace old batteries with three (3)new LR44 / AG13 (1.5V) batteries.- Be sure to insert new batteries withpositive ( ) side up.- Rechargeable batteries are to beremoved from the toy before beingcharged.Step 3-Screw the cover back into place with a Phillips headscrewdriver.Battery Tips:- Batteries should always be installed and changedunder adult supervision.- Non-Rechargeable batteries are not to berecharged.- Rechargeable batteries are only to be chargedunder adult supervision.- Only batteries of the same equivalent type asrecommended are to be used.- Batteries are to be inserted with the correctpolarity.- Exhausted batteries are to be removed from thetoy and disposed of properly.- The supply terminals are not to be short circuited.- Different types of batteries or new and usedbatteries are not to be mixed.- DO NOT mix alkaline, standard (carbon-zinc) orrechargeable batteries.Customer Service1-800-933-0771www.kidkraft.com7

My Dreamy Dollhouse Assembly Instructions Item #65823 Insert elevator slide into track before attaching to dollhouse wall. Adults can loosen or tighten the screws on part 22 to adjust the elevator resistance. Step 16 Step 20 Step 21 Step 22 Step 23 Step 24 Step 17 Step 18 Step 19 Customer Service 1-800-933-0771 www.kidkraft.com 4File Size: 1MB