TCL - NLS Lighting, LLC

2y ago
115 Views
2 Downloads
910.57 KB
5 Pages
Last View : 4d ago
Last Download : 3m ago
Upload by : Angela Sonnier
Transcription

TRAC LINEARCEILING / PENDANTTCLForm 1 Architectural Pendant/Ceiling Mount Elegant Rectilinear ExtrudedAluminum Housing Corrosion Resistant StainlessSteel External Hardware Sleek, low profile housing Spec grade performance Engineered for optimumthermal management 8 Architectural finishesstandard, RAL colors availableFunction Micro Optics IES DistributionsT2, T3, T4, T5 Lumileds Luxeon MX. LEDs Philips Advance 0-10V DimmingDrivers THD @ Max Load 15%Power factor @ Max Load 0.95 3000, 4000, or 5000 Kelvin 16L TO 64L LED Configuration 18-205 Watts (Single HeadWattage) CRI 70 Extruded Aluminum Heat Sink Driver Separate from Light Enginefor Superior Thermal Management 5 mils Powder CoatReliability 30 Year Lighting Solution L70 483,000 Hours L90 160,000 Hours Silicone Micro Optics 5 Year Standard Warranty IP 65 Rated Fixture IP67 Optics UL Listed Reduces energy consumption andcosts up to 65%

DIMENSIONSELECTRICAL 120-277 Volts (UNV) or 347-480 Volts (HV) 0-10V dimming driver by Philips Advance Driver power factor at maximum load is .95, THD maximum load is 15% All internal wiring UL certified for 600 VAC and 105 C All drivers, controls, and sensors housed in enclosed IP-65 compartment Lumileds Luxeon MX LED’s CRI 70 Color temperatures: 3000K, 4000K, 5000KOPTIONS MARINE GRADE FINISH (MGF)—A multi-step process creating protectivefinishing coat against harsh environments. Chemically washed in a 5 stagecleaning system. Pre-baked, Powder coated 3-5 mils of Zinc Rich SuperDurable Polyester Primer. Oven Baked. Finished Powder Coating of SuperDurable Polyester Powder Coat 3-5 mil thickness8.008.00 Surge Protector - (10K)CONTROLS Button Type Photo Cell (PC) Internal Microwave Motion Sensor (IMMS)8.00FRONT VIEW8.00SIDE VIEWCONSTRUCTION Formed Aluminum Internal cooling fins, Finite Element Analysis (FEA) designed Corrosion resistant external hardware One-piece silicone gasket ensures IP-65 seal forelectronics compartment One-piece Optics Plate mounting silicone Micro Optics Two-piece silicone Micro Optic system ensures IP-67seal around each PCBFINISH 3-5 mils electrostatic powder coat. NLS Lighting standard high-quality finishes prevent corrosion andprotects against extreme environmental conditionsBOTTOM VIEWWARRANTYFive-year limited warranty for drivers and LEDsOPTICSSilicone optics high thermal stability and light output provide higherpowered LEDs with minimized lumen depreciation. UV stability with scratchresistance increases exterior application durability. Silicone optics do notyellow, crack or brittle over timeLISTINGS Certified to UL 1598 UL 8750 CSA C22.2 No. 250.0 IP65/ IP67 Rated701 Kingshill Place, Carson, CA 90746Call Us Today (310) 341-2037nlslighting.com

IES DISTRIBUTIONST2 OpticThe Type II distribution is used for narrow pathways and trails,narrow entrances of shopping centers, parking lots and officecomplex’s.T3 OpticThe type III distribution is meant for roadway lighting, generalparking areas and other areas where a larger area of lighting isrequired. Type III lighting needs to be placed to the side of thearea, allowing the light to project outward and fill the area. Thisproduces a filling light flow.Type III light distributions have a preferred lateral width of 40degrees. This distribution is intended for luminaires mountedat or near the side of medium width roadways or areas, wherethe width of the roadway or area does not exceed 2.75 times themounting height.T4 OpticThe type IV distribution produces a semicircular light meantfor mounting on the sides of buildings and walls. It’s best forilluminating the perimeter of parking areas and businesses. Theintensity of the Type IV lighting has the same intensity at anglesfrom 90 degrees to 270 degrees.Type IV light distributions have a preferred lateral width of 60degrees. This distribution is intended for side-of-road mountingand is generally used on wide roadways where the roadway widthdoes not exceed 3.7 times the mounting height.T5 Optic - SymmetricalType V produces a symmetrical distribution that has the sameintensity at all angles. This distribution has a uniform symmetryof candlepower that is essentially the same at all lateral angles.It is meant for large, commercial parking lot lighting as well asareas where sufficient, evenly distributed light is necessarySILICONE OPTICSNLS Lighting Silicone Micro Optical System technology takes quality and performance to the highest level.Vandal resistant, superior clarity—Micro Optics have become the best and lasting solution in the industry.BENEFITS Produces superior 96% clarity Heat resistant to 200 C, 50% higher than acrylic Ecologically friendly—no glare Vandal-resistant Does not brittle, crack, or yellow over time701 Kingshill Place, Carson, CA 90746P: (310) 341-2037nlslighting.com

OPTICAL CONFIGURATIONSRotatable Optics (ROR) Rotated Right, (ROL) Rotated Left options available. Optics field and factory rotatable.TCL / 16LOPTIC PLATE PAINTED TO MATCH FIXTURE FINISHTCL LUMEN CHARTTCL LUMEN CHARTPART ”7.13 LBSTEMP.25 CTCL L70/L90 DATAL70 (64L - 1050mA)L90 (64L - 1050mA)483,000160,000701 Kingshill Place, Carson, CA 90746P: (310) 341-2037nlslighting.com

Project Name:Type:TCL ORDERING GUIDECat#Light Dist.No. of LEDsMilliampsKelvinTrac LinearCeiling Mount(TCL)Type 2(T2)16(16L)175(175)3000K(30K)Type 3(T3)350(35)4000K(40K)Type 4(T4)530(53)5000K(50K)Type (UNV)Ceiling Mount(CM)Bronze Textured(BRZ)Surge Protector(10K)Pendant MountWhite Textured(WHT)Button Photo Cell(PC)*UniversalVoltage 120-277*Direct to Ceiling Mount12" Length(PM12)24" Length(PM24)36" Length(PM36)Custom Length(PMX)Smooth WhiteGloss(SWT)Silver Textured(SVR)Black Textured(BLK)Smooth BlackGloss(SBK)InternalMicrowaveMotion Sensor(IMMS)Marine GradeFinish(MGF)Graphite Textured(GPH)Grey(GRY)Custom(CS)701 Kingshill Place, Carson, CA 90746P: (310) 341-2037nlslighting.com

TCL / 16L 701 Kingshill Place, Carson, CA 90746 P: (310) 341-2037 nlslighting.com TCL LUMEN CHART PART NUMBER T2 LM/W BUG T3 LM/W BUG T4 LM/W BUG T5 LM/W BUG WATTS TCL-16L-175-30K 774 77 765 77 799 80 808 81 10 TCL-16L-175-40K 799 80 791 79 825 83 833 83 10

Related Documents:

any Tcl built-in command. See Appendix A, “Basics of Tcl,” for information on Tcl syntax and on the extensions that have been added to the Tcl interpreter. Using Hierarchy Separators in Tcl Commands Many Tcl commands take an object name as an argument. The path

Tcl application. TclPro Wrapper makes it easy to distribute Tcl applications to your users and manage upgrades in Tcl versions. Tcl/Tk 8.2 The latest version of Tcl/Tk is pre-compiled and ready for use. Bundled extensions Several popular Tcl ext

Tcl lists, which share the syntax rules of Tcl com-mands, are explained in Chapter 5. Control structure like loops and if statements are described in Chapter 6. Chapter 7 describes Tcl procedures, which are new commands that you write in Tcl. Chapter 8 discusses Tcl arrays. Arrays are the mo

Tcl interpreters from the C code and start feeding them Tcl commands to evaluate. It is also possible to de ne new Tcl commands that when evaluated by the Tcl interpreter call C functions de ned by the user. The tcltklibrary sets up the event loop and initializes a Tcl interpreter

The TCL series is used for service purposes and for different industrial and laboratory tasks. For example, thermometers, temperature switches/thermostats, resistance thermometers and thermo-elements can be directly connected and checked. Versions: The TCL series of calibr

Section 2. Tcl/Tk basics Origins of Tcl/Tk Tcl stands for Tool Control Language. Tk is the Graphical Toolkit extension of Tcl, providing a variety of standard GUI interface items to facilitate rapid, high-level application development. Development on Tcl/Tk, pronounced "tickle tee

Dec 06, 2016 · COMMERCIAL LIGHTING 01-13 14-29 industrial lighting hazardous area lighting cleanroom lighting INDUSTRIAL LIGHTING street lighting area lighting induction lighting landscape lighting CITYSCAPE LIGHTING 30-51 ballast light sources HID lamps spares price list A

Mata kulian Anatomi dan Fisiologi Ternak di fakultas Peternakan merupakan mata kuliah wajib bagi para mahasiswa peternakan dan m.k. ini diberikan pada semester 3 dengan jumlah sks 4 (2 kuliah dan 2 praktikum.Ilmu Anatomi dan Fisiologi ternak ini merupakan m.k. dasar yang harus dipahami oleh semua mahasiswa peternakan. Ilmu Anatomi dan Fisiologi Ternak ini yang mendasari ilmu-ilmu yang akan .