TECHNICAL MANUAL For FIRE TAPE - E-Z TAPING SYSTEM
TECHNICAL MANUAL for FIRE TAPE E-Z TAPING SYSTEM PO BOX 10887GREEN BAY, WI 54307800-721-8273http://www.e-ztape.com
Table of ContentsProduct Description .3Fire Tape – Manufacturer.3Fire Tape – Listed Product .3Intertek – Fire Tape SpecDIRECT Listing .3Intertek – Fire Tape Design Number Listings .3Fire Tape – Labeled Product.4Photograph 1 - Example of Labeled Product, Fire Tape ,Bearing Intertek Mark .4Photograph 2 – Example of Labeled Product, Fire Tape ,Bearing Manufacture’s Information.5Photograph 3 – Example of Labeled Product, Fire Tape ,Bearing Traceable Reference Number .5Fire Tape – Labeled Product Packaging .6Photograph 4 – Example of Exterior Packaging: Labeled Product, Fire Tape , .6Joint Tape Compliance .6Intertek Dimensional Verification Tests/Specification: ASTM C474/C475 .6Intertek Strength Tests/Specification: ASTM C474/C475 .7Intertek Adhesion Tests/Specification: ASTM C474/C475 & ASTM D3330 Method A .7Intertek Durability Tests/Specification: ASTM C474/C475 & ASTM D3330 Method A .7Intertek Dimensional Stability Tests/Specification: ASTM C474/C475 .7Download Intertek SpecDIRECT for Fire Tape .8Download Intertek Design Number Listings for Fire Tape .12SDS (MSDS) for Fire Tape .14E-Z Taping System 800-721-8273Page 2http://www.e-ztape.com
Product DescriptionFire Tape – ManufacturerAlwin Manufacturing Company owns All Products, LLC, which does business under E-Z TapingSystem . Fire Tape is manufactured, marketed, and sold by E-Z Taping System .Fire Tape – Listed ProductFire Tape is a Listed, patented1 and proprietary product that is made in the U.S.A., which wasspecifically developed for use with gypsum board assemblies. Fire Tape is a multi-layeredtape used to cover and seal butt joints of gypsum board panels. Fire Tape combines theattributes of paper tape and fiberglass tape into one single product. Fire Tape is an alternativeto conventional paper and fiberglass tape used as a finishing component for gypsum boardassemblies approved and Listed to ASTM E119, Standard Test Methods for Fire Tests ofBuilding Construction and Materials or CAN/ULC S101, Standard Methods of Fire EnduranceTests of Building Construction and Materials for use in the United States and Canada. Thesetest standards are very similar to NFPA 251, UL 263, ISO 8342, BS 4763, etc.Intertek – Fire Tape SpecDIRECT ListingIntertek publishes a Listing for Fire Tape on the Intertek SpecDIRECT website under SPECID: 277454. Intertek’s Listing states that Fire Tape has been “Evaluated to the following:Design listings are based on, and supported by, proprietary test reports. The test reportsfurther define proprietary design details which make these listings applicable only to thespecified products manufactured by the listed manufacturer. Unless otherwise noted, theassemblies in this section have been evaluated for conformance to the following standards: ASTM-E119, Standard Methods of Fire Tests of Building Construction andMaterials CAN/ULC-S101, Standard Methods of Fire Endurance Tests of BuildingConstruction and Materials NFPA-251, Fire Tests of Building Construction and Materials UBC-7-1-94, Uniform Building Code Standard UL-263, Fire Tests of Building Construction and MaterialsDesigns listed are minimum construction requirements to achieve fire rating.Unless otherwise noted, fire ratings apply to tests conducted on both sides.”Intertek is an internationally recognized Testing Laboratory accredited for compliance to ISO17025, General Requirements for the Competence of Testing and Calibration Laboratories.Intertek – Fire Tape Design Number ListingsThe Intertek Design Number Listings are based on fire testing and assessment of the FireTape based on ASTM E119, Standard Test Methods for Fire Tests of Building Construction1234US Patent No. 5.486.394, 5.687.523, and 6.226.946: Foreign Patents Pending: Made in U.S.A.Proper “Part” of the standard’s series must be usedProper “Part” of the standard’s series must be usedSpecDIRECT https://spec-direct.com/Pages/BP Search.aspxE-Z Taping System 800-721-8273Page 3http://www.e-ztape.com
and Materials or CAN/ULC S101, Standard Methods of Fire Endurance Tests of BuildingConstruction and Materials. The Intertek Design Numbers are Listings that describe the buildingconstruction to which the certified product, Fire Tape , is a part. These Listings provide thelocation of the certified product as part of the building construction. As part of the Listing,Intertek also publishes the following Design Numbers using the Listed Fire Tape as acomponent.AttributeWidthThicknessTensile StrengthDimensional StabilityDimensional StabilityBond To GypsumDurabilityICBO-ES AC119 /ICC-ES ESR 1231C474C474C474C474C474D3330 Method AD3330 Method ATestASTM C474Section 10Section 11Section 9Section 12Section 12Section 15SpecificationASTM C4754.3.1.14.3.1.24.3.1.34.3.2.14.3.2.14.4.1Fire Tape – Labeled ProductIntertek is an internationally recognized Certification Body accredited for compliance to ISO17065, Conformity Assessment -- Requirements for Bodies Certifying Products, Processes andServices. Fire Tape is an Intertek Listed product, which is also called a certified product,bearing an Intertek Mark (Labeled product) for both Canada (C) and the United States ofAmerica (US). This means that “The terms & conditions of certification are in order (certificationagreement, factory inspections, authorization to mark or mark license).5”Photograph 1 – Example of Labeled Product, Fire Tape ,Bearing Intertek Mark5Intertek Mark Usage k/Divisions/Commercial and Electrical/Media/PDF/Certifications and Marks/IntertekMark-Usage-Guide.pdfE-Z Taping System 800-721-8273Page 4http://www.e-ztape.com
Photograph 2 – Example of Labeled Product, Fire Tape ,Bearing Manufacture’s InformationPhotograph 3 – Example of Labeled Product, Fire Tape ,Bearing Traceable Reference NumberThe Intertek Mark (Labeled product) on the inside surface of every cardboard core every roll ofFire Tape produced under Intertek’s Product Certification Program is evidence that the productconforms to applicable standards and that there is a program of ongoing factory inspectionsconducted by Intertek’s Follow-up Services (FUS) Department accredited to ISO 17020,General Criteria for the Operation of Various Types of Bodies Performing Inspection. Each rollof Fire Tape also has the manufacturer’s name and a batch number allowing traceability backto the components used to produce this Listed product.E-Z Taping System 800-721-8273Page 5http://www.e-ztape.com
Fire Tape – Labeled Product PackagingThe Listed Fire Tape bearing the Intertek Mark (Labeled product) for both Canada (C) and theUnited States of America (US) is presented in two different types of exterior packaging.Photograph 4 – Example of Exterior Packaging: Labeled Product, Flame FighterFire Tape Joint Tape ComplianceThe Listed Fire Tape bearing the Intertek Mark (Labeled product) for both Canada (C) and theUnited States of America (US) complies with the requirements for joint tape in the InternationalBuilding Code , International Residential Code , and National Building Code of Canada . Thisinformation is verified in Intertek’s Design Number Listings, which are publically availableproduct certification documents.Intertek Dimensional Verification Tests/Specification: ASTM C474/C475ATTRIBUTEC474/C475MINMAXMINMAXFIRETAPE 75in.2.50 in.48 mm57mm1.896 in.CompliesIntertek W/H14250-231ThicknessSection11/4.3.1.20.30mm0.006 in.CompliesIntertek W/H14250-231E-Z Taping System 800-721-82730.012in.Page 6http://www.e-ztape.com
Intertek Strength Tests/Specification: ASTM on9/4.3.1.330 lbs/in.of WidthMAXMINMAX524N/mm ofWidthFIRETAPE RESULTS53.4 lbs/in.of WidthCompliesREFERENCETEST/SPECIntertek W/H14250-231Intertek Adhesion Tests/Specification: ASTM C474/C475 & ASTM D3330 Method AATTRIBUTEC474/C475Bond toGypsumSection15/4.4.1MINMAX100%Failure ofGypsumPaperMINMAX100%Failure ofGypsumPaperFIRETAPE RESULTSREFERENCETEST/SPEC100%CompliesIntertek W/H14250-231Intertek Durability Tests/Specification: ASTM C474/C475 & ASTM D3330 Method AATTRIBUTEDurabilityC474/C475D3330Method AMINMAX80% ofControlSamplesMINMAX80% ofControlSamplesFIRETAPE RESULTSREFERENCETEST/SPEC112%CompliesIntertek W/H14250-231Intertek Dimensional Stability Tests/Specification: ASTM C474/C475ATTRIBUTEC474/C475Dimensional StabilitySection12/4.3.2.1Dimensional StabilitySection12/4.3.2.1E-Z Taping System MAX0.40%Lengthwise2.50%CrosswiseFIRETAPE RESULTSREFERENCETEST/SPEC 0.40%CompliesIntertek W/H14285-231 2.50%CompliesIntertek W/H14285-231Page 7http://www.e-ztape.com
Download Intertek SpecDIRECT for Fire Tape Visit our website, http://www.e-ztape.com, or Intertek’s SpecDIRECT as a means to acquire allof the Fire Tape Design Number Listings and Intertek testing references in a single report. Ifrequested by email, E-Z Taping System will also email Intertek’s SpecDIRECT Listing. Thisreport can be downloaded from the following website https://spec-direct.com/ and click “FreeAccess”.The preceding Intertek webpage titled “Intertek Directory of Building Products” appears. Clickthe down arrow “V” in the box next to the title “Company” and scroll down the list and select “AllProducts, LLC dba E-Z Taping Systems”. Then click the word “Search”E-Z Taping System 800-721-8273Page 8http://www.e-ztape.com
When the following screen appears, click on “E-Z Taping System Fire Tape”.When the following screen appears, click on “PRINT LISTING”.E-Z Taping System 800-721-8273Page 9http://www.e-ztape.com
After you have clicked “Print Listing”, the E-Z Taping System Fire Tape Listing report will begenerated and will appear on the page. The report will explain all of the testing standards usedto create the Design Number Listings. Also there will be a list of “Attributes” and corresponding“Values” that will explain other information related to the certified product, i.e. Fire Tape . Anexample of such information is illustrated below. Refer to the SpecDIRECT Listing Report for“Attributes” and corresponding “Values” of Fire Tape .E-Z Taping System 800-721-8273Page 10http://www.e-ztape.com
E-Z Taping System 800-721-8273Page 11http://www.e-ztape.com
Download Intertek Design Number Listings for Fire Tape The Listed Fire Tape bearing the Intertek Mark (Labeled product) for both Canada (C) and theUnited States of America (US) is referenced in the following Intertek Design Number Listings.These Design Number Listings refer to other Intertek and Underwriter’s Laboratories (UL), aswell as Underwriter’s Laboratories of Canada (ULC), Design Number Listings for specific detailsof the building construction to which the Fire Tape is applied. The application of Fire Tape isdetailed in the following Intertek Design Number Listings and replaces the joint tape in theDesign Number Listings of the building construction to which the Fire Tape is applied. VisitIntertek’s website, https://bpdirectory.intertek.com/Pages/DLP Search.aspx, our website,http://www.e-ztape.com, to acquire or verify Intertek Design Number Listings. If requested byemail, E-Z Taping System will also email a Design Number Listing.The preceding Intertek webpage titled “Intertek Directory of Building Products” appears. Clickthe down arrow “V” in the box next to the title “Company” and scroll down the list and select “AllProducts LLC d.b.a. E-Z Taping System”. Then click the word “Search” in blue text.E-Z Taping System 800-721-8273Page 12http://www.e-ztape.com
The following Intertek webpage titled “Intertek Directory of Building Products” appears. Thenclick the word “E-Z Taping System Fire Tape” in blue text.The following Intertek webpage titled “Intertek Directory of Building Products” appears. Click theDesign Number for the Listing to be viewed. Then click the word “View” in blue text in thebottom left-hand corner of the page.The desired Design Number Listing appears on the screen. The Design Number Listing can beprinted as a PDF.E-Z Taping System 800-721-8273Page 13http://www.e-ztape.com
SDS (MSDS) for Fire Tape The material safety data sheet for Fire Tape is attached or can be located at the followingwebsite: http://www.e-ztape.com/pdf/msds-sheets.pdfVisit our website, http://www.e-ztape.com, for more information and other products of E-ZTaping System .E-Z Taping System 800-721-8273Page 14http://www.e-ztape.com
E-Z Taping System 800-721-8273Page 15http://www.e-ztape.com
E-Z Taping System 800-721-8273Page 16http://www.e-ztape.com
email, E-Z Taping System will also email a Design Number Listing. The preceding Intertek webpage titled “Intertek Directory of Building Products” appears. Click the down arrow “V” in the box next to the title “Company” and scroll down the list and select “All
Bruksanvisning för bilstereo . Bruksanvisning for bilstereo . Instrukcja obsługi samochodowego odtwarzacza stereo . Operating Instructions for Car Stereo . 610-104 . SV . Bruksanvisning i original
118 Nuke Tape duct tape strips 119 Oil filter, extra o-rings, crush washers 120 OilJugs with motor oil and gear lube 121 Owners Manual 122 Siphon hose – MotoSiphon 123 Spare bulbs 124 Spare fuses 125 SuperGlue 126 Tape – aluminum 127 Tape – duct tape (Nuke-Tape) 128 Tape - electrical (red and black) 129 Tape
FIRE TOPPER Fire Bowl User Manual Home » FIRE TOPPER » FIRE TOPPER Fire Bowl User Manual Contents [ hide 1 FIRE TOPPER Fire Bowl 2 Setting Up Your Fire Topper Fire Bowl 2.1 Set-Up 3 Placement and Location 3.1 Liquid Propane Tank 4 Using your Fire Topper Fire Bowl - For your safety, read before lighting. 5 Cleaning, Maintenance, Storage 6 .
1. Sticky Tape Lab Apparatus For each 2 person group: One roll of transparent tape (recommended: 3M Magic tape, may be shared between 2 groups) Two strips of paper, 15 cm x 1.5 cm Two strips of aluminum foil, 15 cm x 1.5 cm Plastic ruler, glass rod 10 cm x File Size: 1MBPage Count: 20Explore furtherThe Sticky Tape Lab ScienceBlogsscienceblogs.comChemistry unit 6 Flashcards Quizletquizlet.comSolutions: Sticky Tape - Buffalo State Collegephysicsed.buffalostate.eduSticky Tape Activity - Chandler Unified School Districtwww.cusd80.comSticky Tape Activity - Buffalo State Collegephysicsed.buffalostate.eduRecommended to you b
10 tips och tricks för att lyckas med ert sap-projekt 20 SAPSANYTT 2/2015 De flesta projektledare känner säkert till Cobb’s paradox. Martin Cobb verkade som CIO för sekretariatet för Treasury Board of Canada 1995 då han ställde frågan
service i Norge och Finland drivs inom ramen för ett enskilt företag (NRK. 1 och Yleisradio), fin ns det i Sverige tre: Ett för tv (Sveriges Television , SVT ), ett för radio (Sveriges Radio , SR ) och ett för utbildnings program (Sveriges Utbildningsradio, UR, vilket till följd av sin begränsade storlek inte återfinns bland de 25 största
Hotell För hotell anges de tre klasserna A/B, C och D. Det betyder att den "normala" standarden C är acceptabel men att motiven för en högre standard är starka. Ljudklass C motsvarar de tidigare normkraven för hotell, ljudklass A/B motsvarar kraven för moderna hotell med hög standard och ljudklass D kan användas vid
LÄS NOGGRANT FÖLJANDE VILLKOR FÖR APPLE DEVELOPER PROGRAM LICENCE . Apple Developer Program License Agreement Syfte Du vill använda Apple-mjukvara (enligt definitionen nedan) för att utveckla en eller flera Applikationer (enligt definitionen nedan) för Apple-märkta produkter. . Applikationer som utvecklas för iOS-produkter, Apple .
