1K3697 - ARTWORK, SETUP BOOKLET, ESP-5, AMERICAS (UE)

2y ago
59 Views
2 Downloads
1.23 MB
16 Pages
Last View : 13d ago
Last Download : 3m ago
Upload by : Lucca Devoe
Transcription

Start HereAll-in-One PrinterPrintCopyScanNote: A USB 2.0 (High Speed) cable is required to connect your Kodak All-in-One printer to your Windowsor Macintosh OS computer.

1Unpacking the PrinterInkjet Printer SoftwareFOR WINDOWS & MACINTOSHColor InkPower Cord and AdapterPrintheadCartridge10Ink CartridgesSoftware andUser Guide CDa) Remove all orange shipping tape and any foam piecesfrom the outside of the printer.b) Lift the printer access door.Black10InkCartridgeColor Ink Cartridge10BlackInkCartridge10Printer accessdoor.Scanner lid.c) Remove all orange shipping tape and any foampieces from the inside of the printer.Carriage.Black10InkCartridgeColor Ink Cartridge10BlackInkCartridge10d) Close the printer access door.Front access door.2www.kodak.com/go/aiosupport

2Connecting the PowerUSBDo not connect the USB cable to the printer until instructed duringsoftware installation.a) 1. Connect the power cord and adapter.2. Connect adapter to printer.3. Connect to power source.b) Remove the plastic film from the LCD display.Position the LCD display.c) Press ON. Select your language when prompted.Do not insert paper until prompted by theLCD display.www.kodak.com/go/aiosupport3

3Inserting the Printheada) Lift the printer access door.Black10InkColor Ink CartridgeCartridge10BlackInkCartridge10b) Remove the printhead from its bag.Insert the printhead immediately uponopening sealed bag. The printhead is fragile,handle carefully.c) Pull on the orange tab to remove theprotective retainer.4www.kodak.com/go/aiosupport

3d) Carefully remove and discard the orangeprotective cap.Do not touch the copper-colored contacts.Carriage.e) Place the printhead into the carriage.Insert at the angle shown.f) Push firmly against the target label of the printheaduntil you hear a loud snap.www.kodak.com/go/aiosupport5

4Inserting the Ink Cartridgesa) Remove the black ink cartridge from its bag.Insert ink cartridges immediately upon openingsealed bag.10cklaBkInidrtraC10eg10b) Carefully remove and discard the orange cap.Handle ink cartridges carefully to avoid ink transfer.c) Insert the black ink cartridge into the printhead.Black Ink Cartridge6www.kodak.com/go/aiosupport

4d'encrenoire1010Cartouchee) Open and uncap the color ink cartridge. Insert it intothe printhead.creCartoucheencouleur10d'd) Press down on the ink cartridge until you hear it clickinto position.eoirenncr'eedchourtCa10Cad'encre couleur10chtoucheurtoCaredf) Press down firmly on the ink cartridge until you hear itclick into position.'eenncreoir10g) Close the printer access door.10BlackInkColor Ink CartridgeCartridge10BlackInkCartridge10Color Ink Cartridge10www.kodak.com/go/aiosupport7

5Loading Paper and CalibratingDo not insert paper until the LCD display instructs you to do so.Front accessdoor.a) Lower the front access door and pull the paper tray allthe way out.If the attention light flashes, follow the instructions onthe LCD screen.Paper tray.Paper edge guideb) Insert a small stack of 5 to 10 sheets of plain paperinto the paper tray. Squeeze the paper edge guide andslide it guide against the left edge of the paper.Leave the paper tray extended.NOTE: For photo paper, insert a stack of paper into thepaper tray face down.Leave the paper tray extended.8www.kodak.com/go/aiosupport

5c) Flip up the paper stop.d) Press Start.The printer will automatically begin to calibrate.e) Calibration will take about two minutes and iscomplete when the sheet has printed.www.kodak.com/go/aiosupport9

6Installing Windows WINDOWSSHUSBDo not connect the USB cable tothe printer until instructed duringsoftware installation.a) Load the Kodak Inkjet Printer Software CD into theCD-ROM drive. Follow the on-screen promptswhen the instructions appear.If instructions do not appear, click Start, then Run.Select CD-ROM drive and type setup.exe, thenpress ENTER.b) Connect the USB cable to the printer wheninstructed. Continue to follow the on-screenprompts until installation is complete.Setting your KODAK All-in-One Printer as the default on your WINDOWS OSWINDOWS XP:StartPrinters and FaxesRight-click the icon for the printer you want to use as the default printer, andthen click Set As Default Printer.WINDOWS VISTA:StartControl PanelHardware and SoundPrintersRight-click on the printer you want to use, and then click Set As Default Printer.10www.kodak.com/go/aiosupport

6Install Macintosh NTOSHa) Connect the USB cable to the printer and yourMacintosh computer.b) Load the Kodak Inkjet Printer Software CD into theCD-ROM drive.The Kodak Inkjet Printer software installer windowshould be displayed. If not, double-click the KodakInkjet Printer Software CD icon on the desktop.Follow the on-screen prompts until installationis complete.FOR WINDOWS & MACINTOSHSetting your KODAK All-in-One Printer as the default on your MACINTOSH OSMAC OS X defaults to the printer most recently added. To change the default printer, follow these steps:1. From the print dialog, choose Edit Printer List from the Printer pop-up menu.2. Select a printer from the Printer List.3. Choose Make Default from the Printer’s menu.www.kodak.com/go/aiosupport11

Home Center SoftwareHome Center Software for WindowsYou can use Kodak Home Center to browse, print, copy, scan, order supplies, andconfigure your AiO Printer from the computer.Home Center Software for MacintoshYou can use Kodak Home Center to order supplies and configure your AiO Printer fromthe computer.12www.kodak.com/go/aiosupport

Warranty InformationLimited WarrantyKodak warrants Kodak consumer electronic products and accessories (“Products”), excluding batteries, to be freefrom malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain theoriginal dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair.Limited Warranty CoverageWarranty service is only available from within the country where the Products were originally purchased. You maybe required to send Products, at your expense, to the authorized service facility for the country where the Productswere purchased. Kodak will repair or replace Products if they fail to function properly during the warranty period,subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as anynecessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at itsoption, refund the purchase price paid for the Product provided the Product has been returned to Kodak togetherwith proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole remediesunder this warranty. If replacement parts are used in making repairs, those parts may be remanufactured or maycontain remanufactured materials. If it is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term ofthe original Product, or 90 days after the date of repair or replacement, whichever is longer.LimitationsThis warranty does not cover circumstances beyond Kodak’s control. This warranty does not apply whenfailure is due to shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, usewith incompatible accessories or attachments (such as third party ink or ink tanks), failure to follow Kodak’soperation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters andcables), or claims made after the duration of this warranty. KODAK MAKES NO OTHER EXPRESS OR IMPLIEDWARRANTY FOR THIS PRODUCT, AND DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE. In the event that the exclusion of any implied warranty is ineffectiveunder the law, the duration of the implied warranty will be one year from the purchase date or such longerperiod as required by law. The option of repair, replacement, or refund is Kodak’s only obligation. Kodak will not beresponsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of thisproduct regardless of the cause. Liability for any special consequential or incidental damages (including but notlimited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment,facilities or services or claims of your customers for such damages resulting from the purchase, use or failure of theProduct), regardless of cause, or for breach of any written or implied warranty is expressly disclaimed.Your RightsSome states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the abovelimitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long animplied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and youmay have other rights which vary from state to state or by jurisdiction. Your statutory rights are not affected.Outside the United States and CanadaIn countries other than the United States and Canada, the terms and conditions of this warranty may be different.Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty orliability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be bynegligence or other act.www.kodak.com/go/aiosupport13

Safety Information- Read and follow these instructions before using KODAK products.- Always follow basic safety procedures.- Follow all warnings and instructions marked on the equipment.WARNING STATEMENTS- Do not expose this product to liquid, moisture, or extreme temperatures. KODAK AC adapters are intended forindoor use only. The use of controls, adjustments, or procedures other than those specified herein may result inexposure to shock and/or electrical or mechanical hazards.- Keep ink cartridges out of reach of children. Ink may be harmful if swallowed.- Do not place your All-in-One Printer on an unstable cart, stand, bracket, or table. Injury to persons and damage tothe equipment may occur.- The use of an accessory attachment that is not recommended by Kodak, such as an AC adapter, may cause fire,electric shock, or injury.- Pushing objects through the equipment openings can result in an electric shock or risk of fire.CAUTIONARY STATEMENTS- Adjust only those controls covered in the operating instructions.- Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualifiedservice personnel.- The AC adapter power supply is equipped with 3-wire grounding type plugs. If you cannot insert the plug into thepower outlet, contact an electrician to check or replace the power outlet.- Do not plug the AC adapter into a household extension cord.- If the power cord or plug is frayed or damaged, the equipment gets wet, or the equipment does not operatenormally when the operating instructions are followed, unplug your All-in-One Printer from the power outlet andcontact Kodak qualified service personnel for further instructions.- For added protection from damage during a lightning storm, or any time when your All-in-One Printer and it’sassociated AC adapter will be left unused for long periods of time, unplug the AC adapter from the power outletand any attached fax line from the printer.- To prevent your All-in-One printer from overheating do not place it near a heat register, or install it in a cabinetwithout proper ventilation.- Do not use your All-in-One Printer near water or spill liquid on it.- Unplug the equipment from the wall outlet before cleaning.- Dropping your All-in-One Printer may damage the housing and result in extensive damage that will require repairby a qualified technician to restore normal operation.- Excessive dust levels may damage internal parts.For more information, go to www.kodak.com/go/MSDS14www.kodak.com/go/aiosupport

Registration has its rewards- including a terrific offer.Register your KODAK All-in-One Printer and get great support, expert tips, free softwaredownloads- plus a phenomenal deal on inkjet supplies to get you started.Simply register right away when prompted during software installation or on the web atwww.kodak.com/go/register. Registration takes a minute- but the rewards are lasting.Inkjet supplies offer valid for U.S. residents only.www.kodak.com/go/aiosupport15

THANK YOUFOR PURCHASING THIS KODAK ALL-IN-ONE PRINTER. KODAK PROVIDESSEVERAL METHODS TO HELP YOU TROUBLESHOOT YOUR PRINTER.For questions or assistance on installation, parts, or operation, please visitwww.kodak.com/go/aiosupport.Make sure that you have the most up-to-date software, firmware and Help files fromthe Web. Visit www.kodak.com/go/downloads to download the latest files.The User Guide is installed with your KODAK Inkjet Printer Software and is located here:ProgramsKodakUser GuideWINDOWS OS:StartMACINTOSH OS:LibraryDocumentationKodak AiO PrintersFurther, you can access topics for troubleshooting through Home Center by clicking thequestion mark (?) button at the top right-hand corner of the menu bar. In the Help panel,select Troubleshoot.If your printer is not responding, attempt to power cycle the printer by unplugging theprinter. Wait 5 seconds, and then plug the power cord back into the printer.You should also confirm that you are using a USB 2.0 (High Speed) cable. USB 2.0cables can be purchased online at www.kodak.com/go/usbcable or at your local retailer.Eastman Kodak CompanyRochester, NY 14650 U.S.A. Eastman Kodak Company, 2009MC/MR/TM: Kodak, EasyShare.*1K3698**1K3698**A**A*1K3698APrinted inThe Bluetooth trademarks are owned by the Bluetooth SIG, Inc.Windows is a registered trademark of Microsoft CorporationMacintosh is a registered trademark of Apple Computer, Inc.

b) Insert a small stack of 5 to 10 sheets of plain paper into the paper tray. Squeeze the paper edge guide and slide it guide against the left edge of the paper. Leave the paper tray extended. NOTE: For photo paper, insert a stack of paper into the paper tray face down. Leave the paper tray e

Related Documents:

Kodak AiO Ink Technology Deep Dive ESP 1.2 / 3.2ESP 1.2 / 3.2 Hero 9.1Hero 9.1 Hero 7.1Hero 7.1 Office Hero 6.1Office Hero 6.1 Hero 5.1Hero 5.1 Hero 3.1Hero 3.1 2011‐ 2013 ESP C110, C310, C315 ESP Office 2150/2170 ESP Office 6150 ESP 7250 ESP 9250 2010‐ ESP 3250 ESP 5250 ESP3 ESP5 ESP7 ESP9 2011 2008‐ 2009 Easyshare 5100 Easyshare 5300 .

ESP 88 and ESP 00 can support a total of 4 cards per ESP for a total of 16 mic/ line inputs and 16 line outputs. The ESP-88 comes pre-loaded with two 4x4 mic/line cards, allowing two additional 4x4 cards to be added. The ESP-00 does not include these cards, so 8 audio input or output cards can be added. PC 0

1 subl 12 , %esp 1 function : 2 movl 3 , 8(%esp ) 2 pushl %ebp 3 movl 2 , 4(%esp ) 3 movl %esp , %ebp 4 movl 1 , (%esp ) 4 subl 16 , %esp 5 c a l l function. Pushes the base pointer (EBP) in the stack, now it’s a saved frame pointer (SFP). Moves the stack pointer (ESP) in EBP, subst

(Postgres) OSISoft Historian A-MQ. ESP Replacement Business Optimization - BPMN. ESP Demo Walkthrough ESP Vibration Simulation ESP Remote Metrics ESP Remote Control. Global visibility to Production KPIs Demo ESP Machine Health Scenario . SSL/TLS – ensure the wire is encrypted

All ESP course designers should know that the job of an effective ESP course design includes: (a) planning and designing an appropriate course suitable for the target ESP groups, (b) deciding on the practical type of syllabus that well meets the basic requirements of the ESP course participants. 1. Theoretical Background to ESP Course Design

The ESP-MC, ESP-SAT and ESP-SITE-Satellite controllers are available as metal wall-mount (WM) or stainless steel pedestal-mount (SS) models, with 8-, 12-, 16-, 24-, 28, 32, 36- or 40-station capability. All configurations have the following special features: Anti-rus

ESP-PSRAM64 and ESP-PSRAM64H are 64 Mbit serial pseudo SRAM devices that are organized in 8Mx8 bits. They are fabricated using the high-performance and high-reliability CMOS technology. ESP-PSRAM64 operates at 1.8V and can offer high data bandwidth at 144 MHz clock rate, while ESP-PSRAM64H o

AngularJS, and honestly, I cannot imagine writing this same application using another kind of technology in this short period of time. I was so excited about it that I wrote an article on using AngularJS with Spring MVC and Hibernate for a magazine called Java Magazine. After that, I created an AngularJS training program that already has more than 200 developers who enrolled last year. This .