Painting Procedure - BULL HOISTS CRANES
PAINTING PROCEDUREExternal SurfaceApplication of paint system APCS 1BEL.BE s.r.l
Coating System: APCS 1BCustomer: EL.BE s.r.l.Reference Document: SAES-H-001Job: TBDRev.No. ProcedureDate:Issued By:Verified By:Approved By:02019-03506/08/2019Edoardo ParottiEdoardo ParottiRossana Della FogliaProject No.: Saudi AramcoRev.: 0Page 1 of 54ROSS COLOR SRLG1 – G2 – G3: Via Redipuglia, 25 – Gorla Minore (VA), ItalyG4: Via A. Colombo, 130 – Gorla Minore (VA), ItalyG5: Via Redipuglia, 180 – Gorla Minore (VA), ItalyG6 – G7: Viale Kennedy, 149 – Marnate (VA), Italywww.rosscolor.itPhone: 39 0331 603423Email: edoardo@rosscolor.itVAT No: IT 02788590129REA: VA288554 – Reg. Imp.: 02788590129
Coating System: APCS 1BCustomer: EL.BE s.r.l.Reference Document: SAES-H-001Job: TBDContents1Scope . 52Normative References General . 632.1Saudi Aramco Engineering Standards (SAES) .62.2Saudi Aramco Materials System Specifications (SAMSS) .62.3Saudi Aramco Inspection Requirement .72.4Saudi Aramco General Instruction.72.5International Organisation for Standardisation (ISO) .72.6American Society for Testing and Materials (ASTM) .92.7National Association of Corrosion Engineers (NACE). 102.8The Society for Protective Coatings (SSPC) . 11Responsibilities . 133.14Involved Parties: . 133.1.1Responsibility of the Supplier: . 133.1.2Responsibility of the Paint Manufacturer:. 143.1.3Responsibility of Vendor: . 14Health, safety and environment (HSE) . 154.1Introduction . 154.2Key environmental principles include: . 154.3General rules for safe access in the company . 154.4Summary of main risk: . 164.5EMERGENCY MANAGEMENT . 164.5.1Operative instructions in case of fire: . 164.5.2Reference point: . 164.5.3Operative instructions in case of medical emergency: . 174.5.4Operative instructions in case of black out: . 174.5.5Operative instructions in case of gas-escape:. 175Personal protective equipment (PPE) . 186Classification of environments . 19Project No.: Saudi AramcoRev.: 0Page 2 of 54ROSS COLOR SRLG1 – G2 – G3: Via Redipuglia, 25 – Gorla Minore (VA), ItalyG4: Via A. Colombo, 130 – Gorla Minore (VA), ItalyG5: Via Redipuglia, 180 – Gorla Minore (VA), ItalyG6 – G7: Viale Kennedy, 149 – Marnate (VA), Italywww.rosscolor.itPhone: 39 0331 603423Email: edoardo@rosscolor.itVAT No: IT 02788590129REA: VA288554 – Reg. Imp.: 02788590129
Coating System: APCS 1BCustomer: EL.BE s.r.l.Reference Document: SAES-H-001Job: TBD6.1ISO 12944 - 2 . 196.1.1Correlation between preparation grades and corrosivity categories . 207Logistic Establishments . 218Ross Color’s Approach to Lean Manufacturing . 228.19Our Lean Transformation process . 22Incoming material checks . 2510Masking. 2611Ambient condition . 2812Pre-Blasting preparations . 2913Blast Cleaning . 3013.114Surface Cleanliness grades . 30Abrasive . 3114.1Abrasive type: . 3114.2Abrasive specification: . 3115Final surface condition . 3215.1Maximum chloride content on substrate . 3216Control prior to paint application . 3317Application . 3417.1Paint mixing . 3417.2Two pack paints - mixing and pot life. 3417.3Priming . 3417.4Application of paint . 3517.5Remedial Work . 3817.5.11818.1General repair . 38Paint System . 39Paint System: APCS 26 . 3919Daily log report (example). 4020Painting report (example) . 4221Inspector . 43Project No.: Saudi AramcoRev.: 0Page 3 of 54ROSS COLOR SRLG1 – G2 – G3: Via Redipuglia, 25 – Gorla Minore (VA), ItalyG4: Via A. Colombo, 130 – Gorla Minore (VA), ItalyG5: Via Redipuglia, 180 – Gorla Minore (VA), ItalyG6 – G7: Viale Kennedy, 149 – Marnate (VA), Italywww.rosscolor.itPhone: 39 0331 603423Email: edoardo@rosscolor.itVAT No: IT 02788590129REA: VA288554 – Reg. Imp.: 02788590129
Coating System: APCS 1BCustomer: EL.BE s.r.l.Reference Document: SAES-H-001Job: TBD22Documentation - ANNEX A: ISO CERTIFICATES . 4423ANNEX B: OPERATOR’S QUALIFICATION . 4624ANNEX C: MATERIAL DATA SHEET . 47Project No.: Saudi AramcoRev.: 0Page 4 of 54ROSS COLOR SRLG1 – G2 – G3: Via Redipuglia, 25 – Gorla Minore (VA), ItalyG4: Via A. Colombo, 130 – Gorla Minore (VA), ItalyG5: Via Redipuglia, 180 – Gorla Minore (VA), ItalyG6 – G7: Viale Kennedy, 149 – Marnate (VA), Italywww.rosscolor.itPhone: 39 0331 603423Email: edoardo@rosscolor.itVAT No: IT 02788590129REA: VA288554 – Reg. Imp.: 02788590129
Coating System: APCS 1BCustomer: EL.BE s.r.l.Reference Document: SAES-H-001Job: TBD1 ScopeThis document governs the application of coating as below detailed.This Coating procedure Specification (CPS) provides the requirements during the receive control, cleaning,surface preparation, blasting, coating, packing and Quality Control Inspection for protective systems applied.This Specification provides requirements for the selection, supply, preparation, application, inspection andtesting of coating and painting systems in according to Reference Document SAES-H-001 and PurchaseSpecification 09-SAMSS-069 for Application of Paint System APCS 1B.This liquid coating procedure is for the external of carbon steel valves according to SAES-H-001, SAES-H002, or SAES-H-004. The following are the conditions wherein this coating procedure shall be used.a) Type of Exposure/Service: Above ground, onshore (per SAES-H-001), offshore (per SAES-H-004),buried/below ground (per SAES-H-002)b) Maximum service temperature: As per maximum exposure/service temperature involved with valverequirementSAPMT or valve end-user shall provide below details that are involved with their concerned valves PurchaseOrder (P.O.) in the Valve Information Sheet for Coating and Procedure Selection for proper coating selectiona) Specific type of exposure/service (onshore or offshore, above ground or buried in dry ground or in subkha,immersion)b) Above ground exposure environment (mild atmosphere or corrosive industrial atmosphere)c) Insulated or non-insulatedd) Maximum exposure/service temperature (deg. C.)This coating procedure shall only be used when External Liquid Coating application is required.Saudi Aramco Inspection Department (SAID) or Saudi Aramco Vendor Inspection Division (SAVID)representative shall review and approve the applicability of this coating procedure and the suitability of theselected coating system and materials to be used in this procedure based on the above information providedin the Valve Information Sheet prior to the start of coating application by the vendor.The corresponding Valve Information Sheet shall be attached with this coating procedure when submitted tothe SAID or SAVID representative prior to the review and approval of this coating procedure.Provide the following General Requirements in accordance with SAES-H-101V and SAES-H-102.a. Handling, storage, and preparation of materialsb. Abrasive materials acceptable qualityc.Acceptable ambient/climatic/weather conditions for surface preparation and coating applicationd.General requirements of the vendor or manufacturer that are not covered by Saudi Aramco’s coatingstandards.Project No.: Saudi AramcoRev.: 0Page 5 of 54ROSS COLOR SRLG1 – G2 – G3: Via Redipuglia, 25 – Gorla Minore (VA), ItalyG4: Via A. Colombo, 130 – Gorla Minore (VA), ItalyG5: Via Redipuglia, 180 – Gorla Minore (VA), ItalyG6 – G7: Viale Kennedy, 149 – Marnate (VA), Italywww.rosscolor.itPhone: 39 0331 603423Email: edoardo@rosscolor.itVAT No: IT 02788590129REA: VA288554 – Reg. Imp.: 02788590129
Coating System: APCS 1BCustomer: EL.BE s.r.l.Reference Document: SAES-H-001Job: TBD2 Normative References General2.1Saudi Aramco Engineering Standards (SAES)SAES-B-067Safety Identification and Safety ColorsSAES-H-002VApproved Saudi Aramco Data Sheets for the Pipeline and Piping CoatingsSAES-H-101VApproved Saudi Aramco Data Sheets – Paints and CoatingsSAES-H-102Safety Requirements for Coating ApplicationsSAES-L-133Corrosion Protection Requirements for Pipelines, Piping and Process Equipment2.2Saudi Aramco Materials System Specifications (SAMSS)09-SAMSS-021Qualification Requirements for Alkyd Enamel Coating System (APCS-6)09-SAMSS-035Qualification Requirements for Aluminum-Pigmented Alkyd Coating System (APCS-4)09-SAMSS-060Packaging Requirements for Coatings09-SAMSS-067Epoxy Coatings for Immersion Service09-SAMSS-069Epoxy Coatings for Atmospheric Service (with and without Polyurethane Topcoat)09-SAMSS-071Inorganic Zinc Primer (APCS-17A and APCS-17B)09-SAMSS-087Epoxy Coatings for Application on Damp Steel Surface09-SAMSS-101Epoxy Mastic Coating (Self-Priming, with and without Polyurethane Topcoat)09-SAMSS-103Qualification Requirements for High Temperature External Coatings in AtmosphericServices (APCS-11A and APCS-11B)Project No.: Saudi AramcoRev.: 0Page 6 of 54ROSS COLOR SRLG1 – G2 – G3: Via Redipuglia, 25 – Gorla Minore (VA), ItalyG4: Via A. Colombo, 130 – Gorla Minore (VA), ItalyG5: Via Redipuglia, 180 – Gorla Minore (VA), ItalyG6 – G7: Viale Kennedy, 149 – Marnate (VA), Italywww.rosscolor.itPhone: 39 0331 603423Email: edoardo@rosscolor.itVAT No: IT 02788590129REA: VA288554 – Reg. Imp.: 02788590129
Coating System: APCS 1BCustomer: EL.BE s.r.l.Reference Document: SAES-H-001Job: TBD09-SAMSS-107Qualification Requirements and Application of Composite Fluoropolymer/CeramicCoatings to Fasteners12-SAMSS-0072.3Saudi Aramco Inspection Requirement175-0919002.4Safety Requirements for Abrasive Blast CleaningSaudi Aramco General InstructionGI-0006.0212.5Fabrication of Structural and Miscellaneous SteelSafety Requirements for Abrasive Blast CleaningInternational Organisation for Standardisation (ISO)ISO 9001Quality management systems - RequirementsISO 14001Environmental management systems - RequirementsISO 2063Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminum and their alloysISO 2178Non-magnetic coating on magnetic substrates – Measurement of coating thickness –Magnetic methodISO 2409Paints and varnishes – Cross-cut testISO 2808Determination of film thicknessISO 4624Paints and varnishes - Pull-off test for adhesionISO 4628Paint and varnishes - Evaluation of degradation of paint coatings Part 2-3-4-5: Designationof degree of blistering, rusting, cracking, flakingProject No.: Saudi AramcoRev.: 0Page 7 of 54ROSS COLOR SRLG1 – G2 – G3: Via Redipuglia, 25 – Gorla Minore (VA), ItalyG4: Via A. Colombo, 130 – Gorla Minore (VA), ItalyG5: Via Redipuglia, 180 – Gorla Minore (VA), ItalyG6 – G7: Viale Kennedy, 149 – Marnate (VA), Italywww.rosscolor.itPhone: 39 0331 603423Email: edoardo@rosscolor.itVAT No: IT 02788590129REA: VA288554 – Reg. Imp.: 02788590129
Coating System: APCS 1BCustomer: EL.BE s.r.l.Reference Document: SAES-H-001Job: TBDISO 4677-1Atmospheres for conditioning and testing – Determination of relative humidity – Part 1:Aspirated Psychrometer methodISO 8501-1Preparation of steel substrates before application of paints and related products - Visualassessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoatedsteel substrates and of steel substrates after overall removal of previous coatingsISO 8501-2Preparation of steel substrates before application of paints and related products - Visualassessment of surface cleanliness - Part 2: Preparation grades of previously coated steelsubstrates after localized removal of previous coatingsISO 8501-3Preparation of steel substrates before application of paints and related products. Visualassessment of surface cleanliness. Part.3: Preparation grades of welds, cut, edges andother areas with surface imperfectionsISO 8501-4Preparation of steel substrates before application of paints and related products. Visualassessment of surface cleanliness -- Part 4: Initial surface conditions, preparation gradesand flash rust grades in connection with high-pressure water jettingISO 8502-3Preparation of steel substrates before application of paints and related products. Part 3:Tests for the assessment of surface cleanliness Assessment of dust on steel surfacesprepared for painting (pressure-sensitive tape method)ISO 8502-4Preparation of steel substrates before application of paints and related products - Tests forthe assessment of surface cleanliness - Part 4: Guidance on the estimation of the probabilityof condensation prior to paint applicationISO 8502-6Preparation of steel substrates before application of paints and related products - Tests forthe assessment of surface cleanliness - Part 6: Extraction of soluble contaminants foranalysis – The Bresle methodISO 8502-9Preparation of steel substrates before application of paints and related products tests for theassessment of surface cleanliness Part 9: Field method for the determination of metric conductwater-soluble saltsProject No.: Saudi AramcoRev.: 0Page 8 of 54ROSS COLOR SRLG1 – G2 – G3: Via Redipuglia, 25 – Gorla Minore (VA), ItalyG4: Via A. Colombo, 130 – Gorla Minore (VA), ItalyG5: Via Redipuglia, 180 – Gorla Minore (VA), ItalyG6 – G7: Viale Kennedy, 149 – Marnate (VA), Italywww.rosscolor.itPhone: 39 0331 603423Email: edoardo@rosscolor.itVAT No: IT 02788590129REA: VA288554 – Reg. Imp.: 02788590129
Coating System: APCS 1BCustomer: EL.BE s.r.l.Reference Document: SAES-H-001Job: TBDISO 8503Preparation of steel substrates before application of paints and related products. Surfaceroughness characteristics of blast-cleaned steel substratesISO 8504-2Preparation of steel substrates before application of paints and related products - Surfacepreparation methods - Part 2: Abrasive blast cleaningISO 11126Preparation of steel substrates before application of paints and related products –Specification for non-metallic blast cleaning abrasivesISO 11127Preparation of steel substrates before application of paints and related products – Testmethods for non-metallic blast cleaning abrasivesISO 12944Paints and varnishes - Corrosion protection of steel structures by protective paint systems.ISO 14918Thermal spraying - Approval testing of thermal sprayersISO 14919Thermal spraying - Wires, rods, and cords for flame and arc spraying - Classification Technical supply conditionsISO 19840Paint and varnishes - Corrosion protection of steel structures by protective paint system Measurement of and acceptance criteria for the thickness of dry film films on rough surfacesISO 20340Paints and Coatings - Performance requirements for protective paint systems for offshoreand related structures2.6American Society for Testing and Materials (ASTM)ASTM A123Standard Specification for Zinc (Hot-Dip Galvanized) Coating on Iron and Steel ProductsASTM A385Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)ASTM D516Standard Test Method for Sulfate Ion in WaterASTM D3359Standard Test Methods for Measuring Adhesion by Tape TestProject No.: Saudi AramcoRev.: 0Page 9 of 54ROSS COLOR SRLG1 – G2 – G3: Via Redipuglia, 25 – Gorla Minore (VA), ItalyG4: Via A. Colombo, 130 – Gorla Minore (VA), ItalyG5: Via Redipuglia, 180 – Gorla Minore (VA), ItalyG6 – G7: Viale Kennedy, 149 – Marnate (VA), Italywww.rosscolor.itPhone: 39 0331 603423Email: edoardo@rosscolor.itVAT No: IT 02788590129REA: VA288554 – Reg. Imp.: 02788590129
Coating System: APCS 1BCustomer: EL.BE s.r.l.Reference Document: SAES-H-001Job: TBDASTM D4138Standard Test Methods for Measurement of Dry Film Thickness of Protective CoatingSystems by Destructive MeansASTM D4227Standard practice for qualification of coating applicators for application of coatings toconcrete surfacesASTM D4228Standard practice for qualification of coating applicators for application of coatings to steelsurfacesASTM D4285Test Method for Indicating Oil or Water in Compressed Air Blotter testASTM D4414Test Method for Measurement of Wet Film ThicknessASTM D4417Test Method for Field Measurement of Surface Profile of Blast Cleaned SteelASTM D4541Test Method for "Pull-off Strength" of Coatings Using Portable Adhesion TestersASTM D4752Tests Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primersby Solvent RubASTM D4940Test method for Analysis of Water Soluble Ionic Contamination of Blasting AbrasivesASTM D5162Standard practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating onMetallic SubstratesASTM D7127Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using aPortable Stylus Instrument2.7National Association of Corrosion Engineers (NACE)NACE NO. 1White Metal Blast CleaningNACE NO. 2Near White Metal b.c.Project No.: Saudi AramcoRev.: 0Page 10 of 54ROSS COLOR SRLG1 – G2 – G3: Via Redipuglia, 25 – Gorla Minore (VA), ItalyG4: Via A. Colombo, 130 – Gorla Minore (VA), ItalyG5: Via Redipuglia, 180 – Gorla Minore (VA), ItalyG6 – G7: Viale Kennedy, 149 – Marnate (VA), Italywww.rosscolor.itPhone: 39 0331 603423Email: edoardo@rosscolor.itVAT No: IT 02788590129REA: VA288554 – Reg. Imp.: 02788590129
Coating System: APCS 1BCustomer: EL.BE s.r.l.Reference Document: SAES-H-001Job: TBDNACE NO. 3Commercial Blast CleaningNACE NO. 4Brush-Off Blast CleaningNACE NO. 12 Specification for the application of thermal spray coatings (metallizing) of Aluminum, Zinc,and their Alloys and composites for the corrosion protection of steelNACE RP 0287Field Measurement of Surface Profile of Abrasive Blast - Cleaned Steel Surfaces Using aReplica TapeNACE RP 0188Discontinuity (Holiday) testing of protective coatingsNACE SP 0178Design, Fabrication and Surface Finish Practices or Tanks and Vessels to be Lined forImmersion ServiceNACE SP 01982.8Control of Corrosion under Thermal Insulation and Fireproofing MaterialsThe Society for Protective Coatings (SSPC)SSPC-PA2Measurement of Dry Coating Thickness with Magnetic GagesSSPC-VIS 1Visual Standard for Abrasive Blast Cleaned SteelSSPC-SP 1Solvent CleaningSSPC-SP 2Hand Tool CleaningSSPC-SP 3Power Tool CleaningSSPC-SP 5White Metal Blast CleaningSSPC-SP 6Commercial Blast CleaningSSPC-SP 7Brush-off Blast CleaningProject No.: Saudi AramcoRev.: 0Page 11 of 54ROSS COLOR SRLG1 – G2 – G3: Via Redipuglia, 25 – Gorla Minore (VA), ItalyG4: Via A. Colombo, 130 – Gorla Minore (VA), ItalyG5: Via Redipuglia, 180 – Gorla Minore (VA), ItalyG6 – G7: Viale Kennedy, 149 – Marnate (VA), Italywww.rosscolor.itPhone: 39 0331 603423Email: edoardo@rosscolor.itVAT No: IT 02788590129REA: VA288554 – Reg. Imp.: 02788590129
Coating System: APCS 1BCustomer: EL.BE s.r.l.Reference Document: SAES-H-001Job: TBDSSPC-SP 10Near White Blast CleaningSSPC-SP 12Water JettingSSPC-SP 16Brush-off Blast Cleaning of Coated and Uncoated Galvanized Steel, Stainless Steels, andNon-Ferrous MetalsSSPC-WJ-1Waterjet Cleaning of Metals-Clean to Bare SubstrateSSPC-WJ-2Waterjet Cleaning of Metals-Very Thorough CleaningSSPC-AB 2Cleanliness of Recycled Ferrous Metallic AbrasiveProject No.: Saudi AramcoRev.: 0Page 12 of 54ROSS COLOR SRLG1 – G2 – G3: Via Redipuglia, 25 – Gorla Minore (VA), ItalyG4: Via A. Colombo, 130 – Gorla Minore (VA), ItalyG5: Via Redipuglia, 180 – Gorla Minore (VA), ItalyG6 – G7: Viale Kennedy, 149 – Marnate (VA), Italywww.rosscolor.itPhone: 39 0331 603423Email: edoardo@rosscolor.itVAT No: IT 02788590129REA: VA288554 – Reg. Imp.: 02788590129
Coating System: APCS 1BCustomer: EL.BE s.r.l.Reference Document: SAES-H-001Job: TBD3 Responsibilities3.1Involved Parties:SupplierROSS COLOR srlPaint ManufacturerHEMPELCustomerEL.BE srlClientSAUDI ARAMCOPaint SystemAPCS 1BPurchase Specification09-SAMSS-069Reference Document3.1.1SAES-H-001Responsibility of the Supplier:a) Quality Control (Q.C);b) Quality Assurance (Q.A.);c) Control Receive of goods;d) Check of steel preparation in according to ISO 8501-3;e) Make sure that all the Company prescriptions are respected and fully understood;f)Carry out intermediate and final checks with verification of the finished works acceptability;g) Write daily reports of the work carried out (as in the attached daily-log); to be transmitted to theCompany representative;h) Have suitable equipment to perform the specified checks, with calibration certification issued by themanufacturer or a recognize body, and a thorough knowledge of its use and reference standards;i)Monitoring of the use of paints according to approved project specification;j)Grant Company/Contractor’s Coating Inspector free access and assistance to inspect all workperformed;k) Uses only operators employed in abrasive blast cleaning and coating qualified to tradesman level asBlaster or Painter.Project No.: Saudi AramcoRev.: 0Page 13 of 54ROSS COLOR SRLG1 – G2 – G3: Via Redipuglia, 25 – Gorla Minore (VA), ItalyG4: Via A. Colombo, 130 – Gorla Minore (VA), ItalyG5: Via Redipuglia, 180 – Gorla Minore (VA), ItalyG6 – G7: Viale Kennedy, 149 – Marnate (VA), Italywww.rosscolor.itPhone: 39 0331 603423Email: edoardo@rosscolor.itVAT No: IT 02788590129REA: VA288554 – Reg. Imp.: 02788590129
Coating System: APCS 1BCustomer: EL.BE s.r.l.Reference Document: SAES-H-001Job: TBD3.1.2Responsibility of the Paint Manufacturer:a) Supply the paint pre-qualified according to the painting system;b) Supply all paint required in unopened containers clearly marked with the following details: name ofmanufacturer, material identification, color reference number, batch number. Other details to besupplied shall include: date of manufacture, quantity, shelf life, safety and technical data sheet;c) Supply the paint before the expiry date.3.1.3Responsibility of Vendor:a) Deliver the material only after the pressure tests have been performed with satisfactory results.It's responsibility of the Client to inform the Painting Supplier about the execution of the test.The Painter Supplier is not liable if the material were delivered without executing the test or if thetest's results was not satisfactory;b) Deliver material only after the steel preparation has been performed in according to ISO 8501-3(Steel Preparation).Project No.: Saudi AramcoRev.: 0Page 14 of 54ROSS COLOR SRLG1 – G2 – G3: Via Redipuglia, 25 – Gorla Minore (VA), ItalyG4: Via A. Colombo, 130 – Gorla Minore (VA), ItalyG5: Via Redipuglia, 180 – Gorla Minore (VA), ItalyG6 – G7: Viale Kennedy, 149 – Marnate (VA), Italywww.rosscolor.itPhone: 39 0331 603423Email: edoardo@rosscolor.itVAT No: IT 02788590129REA: VA288554 – Reg. Imp.: 02788590129
Coating System: APCS 1BCustomer: EL.BE s.r.l.Reference Document: SAES-H-001Job: TBD4 Health, safety and environment (HSE)4.1IntroductionProvide the requirements for health and safety in using this coating procedure according to Country /Government, Industr
2.1 Saudi Aramco Engineering Standards (SAES) SAES-B-067 Safety Identification and Safety Colors SAES-H-002V Approved Saudi Aramco Data Sheets for the Pipeline and Piping Coatings SAES-H-101V Approved Saudi Aramco Data Sheets – Paints and Coating
15 Tonne Chain Hoists - 6m Fall 9 Tonne Lever Hoist - 1.5m Fall 15 Tonne Chain Hoists - 12m Fall northernstrands.com 20 Tonne Chain Hoists - 3m fall 20 Tonne Chain Hoists - 6m fall LEVER HOISTS 0.25 Tonne Lever Hoist - 1.5m Fall 0.5 Tonne Lever Hoist - 1.5m Fall
Seqwater uses a range of different types of crane across the various workplaces including, but not limited to, gantry cranes, girder cranes, davits, hoists and lifting frames. Seqwater may also use mobile cranes as part of construction or maintenance work. It is a Seqwater requirement that all cranes and hoists used at Seqwater worksites
Semi EOT Cranes Traveling EOT Cranes P r o d u c t s W e O f f e r. JIB CRANE . Industrial HOT Cranes Overhead HOT Cranes Traveling HOT Cranes UnderSlug HOT Cranes P r o d u c t s W e O f f e r. GOLIATH CRANES . Wire Rope Electric Hoist Single Girder EOT Cranes 360 Swivel Jib Crane H
17 Painting advice and specifications 18 General painting advice 71 for all substrates 21 Repainting all substrates 23 Painting substrates 23 Painting glassfibre 25 Painting ferrocement 26 Painting metal 29 Painting and varnishing wood 34 Painting decks, bilges and lockers 35 Painting keels 36 Painting propellers, outdrives and sterngear
overhead cranes, gantry cranes, and hoists and to establish inspection requirements. 2. Scope 2.1. This policy applies to all University personnel involved with working with and around overhead cranes, gantry
Supplemental Listing Document for Callable Bull/Bear Contracts over Single Equities Issuer: CREDIT SUISSE AG . structured products using shares as underlying assets can be issued in the ratio of 5, 50 or 500 structured products for one share in addition to the . Type Bull Bull Bull Bull Bull Company China Construction Bank .
CRANES AND HOISTS DIVISION 14600 14600 A-Series CMAA-D-and-E Page 14600-1 14600 Cranes and Hoists Notwithstanding any representation made by any party to the contrary in any other verbal and/or written communication, Ace World Companies makes absolutely n
Workshop cranes M6 M4 - M4 M5 Overhead travelling cranes, pigbreaking cranes, scrapyard cranes Grab oder magnet M8 M6 - M6 - M7 M7 - M8 Bridge cranes for unloading, bridge cranes for containers Other bridge cranes (with crab and/or slewing jib crane) a) Hook or spreader duty b) Hook duty M6 - M7 M4 - M5 M5 - M6 M4 - M5 M3 - M4-M6 - M7 M4 - M5 .
