ENGINEERING GRAPHICS & DESIGN (EGD)
(DRAFT as on 15 November 2020)2021 RECOVERY CURRICULUM ANDASSESSMENT PLANSENGINEERING GRAPHICS & DESIGN (EGD)GRADE 10, 11 & 12Implementation: January 2021
Presentation Outline1. 2021 Content Overview for the Phase2. 2021 Annual Teaching Plan3. 2021 School Based Assessment (SBA)4. Conclusion
1. 2021 Content Overviewfor the FET PhaseEngineering Graphics & Design(EGD)NOTE: Information as on 15 November 2020.
Summary: (as on 15 November 2020)2021 Content Overview for the PhaseENGINEERING GRAPHICS AND DESIGNGRADE 10GRADE 11GRADE 12General drawing principlesUse/care/dangers ofdrawing instruments, linetypes, line work, lettering,dimensioning etc.The Grade 10 content remainsapplicableThe Grade 10 content remainsapplicableFree-hand drawingFree-hand drawingtechniquesThe Grade 10 content remainsapplicableThe Grade 10 content remainsapplicableSetting up a drawing sheetA4 and A3 drawing sheetswith general name/titleblocksRelevant Civil andMechanical name/titleblocks/-panelsRelevant Civil andMechanical name/titleblocks/-panels
Summary: (as on 15 November 2020)2021 Content Overview for the PhaseENGINEERING GRAPHICS AND DESIGNGRADE 10GRADE 11GRADE 12Geometrical constructionGeometrical (instrument)constructions, regularpolygons and ellipsesThe Grade 10 content remainsapplicableThe Grade 10 content remainsapplicableScalesThe application of any scaleThe Grade 10 content remainsapplicableThe Grade 10 content remainsapplicableSolid geometryRight-regular solids withsections and true shapesCombinations of the rightregular solids, whichincludes solids with holes,that include sections andtrue shapesCombinations of the rightregular solids, whichincludes solids with holes,that include sections andtrue shapes
Summary: (as on 15 November 2020)2021 Content Overview for the PhaseENGINEERING GRAPHICS AND DESIGNGRADE 10GRADE 11GRADE 12Descriptive geometry True lengths of lineThe Grade 10 content on truesegments. Use projection lengths and true inclinationsand construction methods. remains applicable True inclinationsThe Grade 10 content on truelengths and true inclinationsremains applicableMechanical drawingCastings and objects fromindustrySimple assembliesComplex assemblies andwelding, machining,tolerances & treatmentsymbols
Summary: (as on 15 November 2020)2021 Content Overview for the PhaseENGINEERING GRAPHICS AND DESIGNGRADE 10GRADE 11GRADE 12Civil drawingFloor plans, basic single lineelevations and sectionalelevations of the foundationto slabSimple isometric drawingswith auxiliary viewsFloor plans, elevations withbasic single line roofs andsectional elevations of thefoundation to the ceilingheight, as well as fixturesIsometric drawingFloor plans, completedetailed elevations andsectional elevations of thefoundation to the roof, aswell as drainage, electricalfittings and site plansComplex isometric drawings Complex isometricwith auxiliary views anddrawings with auxiliarycirclesviews, circles and sections
Summary: (as on 15 November 2020)2021 Content Overview for the PhaseENGINEERING GRAPHICS AND DESIGNGRADE 10GRADE 11GRADE 12Perspective drawingN/A for 2021!N/A for 2021!N/A2-point perspectivedrawingsElectrical diagramsN/A for 2021!InterpenetrationComplex 2-pointperspective drawings withcircles and arcsElectrical fixtures and wiringdiagrams on floor plans ofcivil drawingsBetween two in-line regular Between two in-line orgeometrical prisms and/or offset regular geometricalcylindersprisms and/or cylinders
Summary: (as on 15 November 2020)2021 Content Overview for the PhaseENGINEERING GRAPHICS AND DESIGNGRADE 10GRADE 11GRADE 12DevelopmentsN/AThe parts of interpenetratingsolids or tubes/pipesNO transition pieces for 2021!N/ALoci (Cam)Simple cams with uniformmotion with wedge shapedfollowers Parts of interpenetratingsolids or tubes/pipes Transition piecesComplex cams with motionsthat are either uniformand/or harmonic and/ oruniform acceleration andretardation, with eitherwedge shaped or rollerfollowers
Summary: (as on 15 November 2020)2021 Content Overview for the PhaseENGINEERING GRAPHICS AND DESIGNGRADE 10N/AGRADE 11Loci (Mechanisms)N/ALoci (Helix)N/AN/A for 2021!PAT: The Design ProcessGRADE 12Loci of a point(s) on thecomponents of mechanismsHelix of augers, spiralchutes and coil springsApplication of the complete Application of the complete Application of the completeDesign Process to a selected Design Process to a selected Design Process to a selectedscenarioscenarioscenario
3. The 2021 EGD Year PlanNOTE: The 2021 EGD YEAR PLAN isaligned to the 2021 School Calendar.
ORIGINAL 2021 EGD YEAR PLAN (ATP)
4. 2021 CurriculumAnnual Teaching Plans (ATPs)NOTE: The 2021 EGD ATP is alignedto the 2021 School Calendar.
Summary: (as on 15 November 2020)2021 EGD TopicsGRADE 10 ATP for 2021TERM 1TERM 2TERM 3(52 days)(Max 14 days)EGD Admin andIntroduction toPAT: Scenarios(s)(2 days)PAT Phase 2Civil DrawingGeneral drawingprincipals(9 days)EllipseSolid GeometryRevision(Remaining days tillexamination)ScaleDescriptive Geom.Geometricalconstruction(15 days)Mechanical draw.Civil Drawing(15 days)PAT: Design Process(3 days)Isometric drawing(14 days)PAT Phase 3(45 days)(28 days)(4 days)TERM 4(5 days)(5 days)Free-hand drawing(9 days)(8 days)(5 days)(18 days)(19 days)(10 days)(4 days)
Summary: (as on 15 November 2020)2021 EGD TopicsGRADE 11 ATP for 2021TERM 1TERM 2TERM 3(52 days)(Max 14 days)Mechanical drawingContinue withContinue with(20 days)2-pointperspectiveIsometric drawingCivil drawing(45 days)(16 days)(28 days)(20 days)(21 days)Solid geometryLoci of a CamInterpenetration& DevelopmentRevision(Remaining days tillexamination)(17 days)(21 days)2-point perspectiveSolid geometryLoci of a CamPAT Phase 1PAT Phase 2PAT Phase 3(5 days)(3 days)(6 days)(5 days)TERM 4(10 days)(4 days)(5 days)
Summary: (as on 15 November 2020)2021 EGD TopicsGRADE 12 ATP for 2021TERM 1TERM 2Mechanical draw.Isometric drawing(45 days)(12 days)(28 days)(10 days)TERM 3(Max 28 days)(Max 10 days)Continue withRevision(Remaining days tillexamination)Loci of a Cam( 4 days)Civil drawingSolid geometryPAT Phase 32-point perspective(10 days)Interpenetration &DevelopmentLoci of aMechanismPAT Phase 1Loci of a CamLoci of a HelixPAT Phase 2Develop.Transition Piece(15 days)(3 days)(12 days)(19 days)( 6 days)(5 days)TERM 4(3 days)(10 days)(8 days)(8 days)
4. 2021 School BasedAssessment (SBA), Examination& Practical Assessment Task(PAT) AmendmentsNOTE: 2021 EGD ‘AssessmentRequirements’ are aligned to the 2021School Calendar.
Summary: (as on 15 November 2020)2021 Programme of AssessmentGRADE 10 SBA Requirements for 2021TERM 1TERM 2TERM 3TERM 4Course Drawings:Course Drawings:Course Drawings:1. Freehanddrawing2. 1st Geometricalconstruction3. 2nd Geometricalconstruction4. Ellipse5. Mechanicaldrawing6. Isometricdrawing7. 1st Solid geometry 12. Civil section offoundation8. 2nd Solid geometry9. Descriptivegeometry10. Civil: areas &perimetersFINAL11. Civil floor planPromotionalExaminationControlled TestCourse Drawings: CDs indicated in GREEN are the CDs replaced/moved for 2021 only! See 2021 EGD Assessment Requirements document for details of CDs.
Summary: (as on 15 November 2020)2021 Programme of AssessmentGRADE 11 SBA Requirements for 2021TERM 1TERM 2TERM 3TERM 4Course Drawings:Course Drawings:Course Drawings:Course Drawings:1. Mechanicalanalyticalexercise2. 1st mechanicalassembly3. 2nd mechanicalassembly4. Isometricdrawing5. Two-pointperspective6. Civil floor planwithelevations7. Civil sectionalelevation8. 1st Solid geometry9. 2nd Solid geometry(new)10. 1st Interpen. &development11. 2nd Interpen. &development (new)12. 3rd Mechanicalassembly13. Loci: CamControlled TestFINALPromotionalExamination CDs indicated in GREEN are the CDs replaced/moved for 2021 only! See 2021 EGD Assessment Requirements document for details of CDs.
Summary: (as on 15 November 2020)2021 Programme of AssessmentGRADE 10 & 11 PROGRAMME of FORMAL ASSESSMENT for 2021FORMAL ASSESSMENT: 100%LEARNERS EGD FILE(S): 50%SCHOOL BASED ASSESSMENT PRACTICAL ASSESSMENT TASK (PAT)60% (tbc.)20% (tbc.)(Internally set and assessed)TEST:Term 2 ControlledTests40(tbc.)COURSE DRAWINGS:ALL the marks of ALLthe prescribed CDs60(tbc.)TOTAL100(Externally set and internally assessed)PAT Phase 1:The Design Process&PAT Phase 2:Orthographic Working Drawings&PAT Phase 3:Self-assessment andPresentationTOTAL100PROMOTIONALEXAMINATION20% (tbc.)(Internally or externally set,but internally assessed)NB: The final mark for eachpaper must be a mark thathas been converted to 100.PAPER ONE:100PAPER TWO:100TOTAL200
Summary: (as on 15 November 2020)2021 Programme of AssessmentGRADE 12 SBA Requirements for 2021TERM 1TERM 2TERM 3Course Drawings:Course Drawings:Course Drawings:1. 1st mechanicalassembly2. Mechanicalanalytical exercise3. Civil section4. Civil floor planwith elevations5. Civil site plan6. Two-pointperspective7. Isometric drawing8. Solid geometry9. Interpenetration& development7. 2nd mechanicalassembly11. Loci: Cam12. Loci: Mechanisms13. Loci: Helix14. Development ofTransition Piece15. 3rd mechanicalassemblyPreparatoryExaminationTERM 4FINAL NSCExamination CDs indicated in GREEN are the CDs replaced/moved for 2021 only! See 2021 EGD Assessment Requirements document for details of CDs.
Summary: (as on 15 November 2020)2021 Programme of AssessmentGRADE 12 PROGRAMME of FORMAL ASSESSMENT for 2021FORMAL ASSESSMENT: 100%EXTERNAL ASSESSMENT: 75%SCHOOL BASES ASSESSMENTPRACTICAL ASSESSMENT TASK (PAT) FINAL NSC EXAMINATION25%50%25%(Internally set and assessed)(Externally set & internally assessed)(Externally set and assessed)LEARNER’S EGD FILELEARNER’S PAT FILE/PORTFOLIOPAT Phase 1:The Design Process&PAT Phase 2:Orthographic Working Drawings&PAT Phase 3:Self-assessment andPresentationThe final mark for eachpaper will be a mark thathas been converted from200 to 100.PAPER ONE: 3 hrs100(200 marks 2 100)PAPER TWO: 3 hrs100(200 marks 2 100)COURSE DRAWINGS:ALL the marks of ALLthe prescribed CDs40(tbc.)EXAMINATIONS:Preparatory (Sept)60(tbc.)TOTAL100TOTAL100TOTAL200
Summary: (as on 15 November 2020)2021 Programme of AssessmentMotivation for retaining Course Drawings (CDs):An essential ‘teaching and learning’ component of EGD is ‘assessment forlearning’, which requires of learners do as many tasks as possible, of which most should beinformally evaluated or assessed so that gaps can be identified, and appropriate remedialactions implemented.Although only addressing some of the required ‘assessment for learning’ requirements, CDswill at least ensure that all the learners will be given constructive feedback on some oftheir Daily Developmental Exercises (DDEs)/tasks.As EGD is both a knowledge and application/skill-based subject, many DDEs, onthe content of each topic and in accordance with the Annual Teaching Plan (ATP), must bedone on a regular (daily) basis.From this essential developmental process, various DDEs should be formally assessedand recorded as part of the programme of compulsory SBA tasks. These assessed andrecorded DDEs will then be referred to as CDs.
Summary: (as on 15 November 2020)2021 Programme of AssessmentCont. of Motivation for retaining Course Drawings (CDs):Some of the purposes of the CDs (As described in the CAPS): To provide evidence that the prescribed content has been adequately covered; To provide evidence that ALL the learners have been assessed and given sufficientfeedback on their acquired knowledge and skills on common tasks of each topic;Some of the most relevant requirements for CDs (As described in the CAPS): The CDs must come from the normal developmental teaching and learning process of EGDand should therefore be some of the regular (daily) tasks, i.e. the DDEs; The recorded CD mark should address all, or most of, the grade-specific content of thetopic and it must be of an appropriate higher order of complexity for the specific grade.However, more than one task may be used to obtain the recorded CD mark; To ensure that all the CDs comply with test and examination requirements and standards,all CDs, with the exception of the analytical exercises and the perspective drawing(s), mustbe tasks that are completely redrawn; It is important to note that the CDs are not tests.
Summary: (as on 15 November 2020)2021 Programme of AssessmentModeration of EGD SBA tasksThe pre- and post-moderation of SBA task must still be implementedwhere required!Moderation of Course Drawings (CDs):As CDs should be randomly selected from the daily tasks, referred to as Daily DevelopmentalExercises (DDEs), the pre-moderation of CDs is not a prerequisite. The post-moderation ofALL aspects of CDs, i.e. if the tasks met ALL the requirements as well as the assessment ofALL the tasks, must however be conducted at ALL the required levels, i.e. School (SMT),District and Provincial.Moderation of Examination Papers:ALL Examination Papers, i.e. the Final/Promotional Grade 10 & 11 papers as well as thePreparatory Grade 12 papers, must at least be pre-moderated at the level it was set, i.e. atSchool (SMT) level if set at school, Provincial level if set by the Province etc., and postmoderated at ALL the required levels, i.e. School (SMT), District and Provincial.
Summary: (as on 15 November 2020)Examination Structure for 2021Grade 10 Final ExaminationENGINEERING GRAPHICS & DESIGNGRADE 10 2021 FINAL Promotional ExaminationPAPER 1 -CIVIL(2 hours)In first-angle orthographic projectionPAPER 2 -MECHANICAL(2 hours)In third-angle orthographic projectionQ1Civil analytical 15%Q 1 Mechanical analyticalQ2Descriptive geometry 15%Q2Q3Solid geometry 25%Q 3 Isometric drawingQ4Civil working drawing 45%Q4Geometrical construction EllipseMechanical workingdrawing 15% 25% 25% 35%
Summary: (as on 15 November 2020)Examination Structure for 2021Grade 11 Final ExaminationENGINEERING GRAPHICS & DESIGNGRADE 11 2021 FINAL Promotional ExaminationPAPER 1 -CIVIL(3 hours)In first-angle orthographic projectionQ1Q2Q3Q4Civil analyticalSolid geometry and/orInterpenetration anddevelopment2-point perspectivedrawingCivil working drawingPAPER 2 -MECHANICAL(3 hours)In third-angle orthographic projection 15%Q 1 Mechanical analytical 15% 20%Q 2 Loci of a Cam 20% 25%Q 3 Isometric drawing 25% 40%Q 4 Mechanical assembly 40%
Summary: (as on 15 November 2020)Examination Structure for 2021Grade 12 Preparatory ExaminationENGINEERING GRAPHICS & DESIGNGRADE 12 2021 Preparatory ExaminationPAPER 1 -CIVIL(3 hours)In first-angle orthographic projectionQ1Q2Q3Q4Civil analyticalPAPER 2 -MECHANICAL(3 hours)In third-angle orthographic projection 15%Q 1 Mechanical analytical 15%Solid geometry and/orInterpenetration and 20%development and/orDevelop. of transition piece2-point perspective 20%drawingCivil working drawing 45%including electrical featuresLoci of a Cam and/orLoci of point(s) of aQ2mechanism and/orLoci of a Helix 20%Q 3 Isometric drawing 20%Q 4 Mechanical assembly 45%
Summary: (as on 15 November 2020)Examination Structure for 2021Grade 12 Final NSC ExaminationENGINEERING GRAPHICS & DESIGNGRADE 12 2021 FINAL NSC ExaminationPAPER 1 -CIVIL(3 hours)In first-angle orthographic projectionQ1Q2Q3Q4Civil analyticalPAPER 2 -MECHANICAL(3 hours)In third-angle orthographic projection 15%Q 1 Mechanical analytical 15%Solid geometry and/orInterpenetration and 20%development and/orDevelop. of transition piece2-point perspective 20%drawingCivil working drawing 45%including electrical featuresLoci of a Cam and/orLoci of point(s) of aQ2mechanism and/orLoci of a Helix 20%Q 3 Isometric drawing 20%Q 4 Mechanical assembly 45%
Summary: Practical Assessment Task(PAT) for 2021ENGINEERING GRAPHICS AND DESIGNGRADE 10GRADE 11Phase 1: Design Brief Research 2 x Freehand Solutions SelectionPhase 2: Orthographic Drawing:3 x views 3D DrawingPhase 1: Design Brief Research 2 x Freehand Solutions SelectionPhase 2: Orthographic Drawing:3 x views 3D DrawingPhase 3: Self-assessment &Deadlines PresentationPhase 3: Self-assessment &Deadlines PresentationGRADE 12Phase 1: Design Brief Research 2 x Freehand Solutions SelectionPhase 2: Orthographic DrawingNo 1: 4 x views Orthographic DrawingNo 2: 1 x view Civil &3 x views Mechanical 3D DrawingPhase 3: Self-assessment &Deadlines Presentation
Thank you!
Engineering Graphics & Design (EGD) NOTE: Information as on 15 November 2020. ENGINEERING GRAPHICS AND DESIGN. GRADE 10 . GRADE 11; GRADE 12 . General drawing principles: Use/care/dangers of drawing instruments, line types, line work, lettering, dimensioning etc. The Grade 10 contentremains applicable. The Grade 10 contentremains applicable. Free-hand drawing. Free-hand drawing techniques. The .
Jan 01, 1970 · 11) Identify a remote EGD server. Step 4.2.2 (page 13) Review producers that are on the EGD server. Step 4.2.3 (page 13) Select producers and actions. Step 4.2.4 (page 15) Build the selected actions. Step 4.2.1. Identify a Remote EGD Server The Object Builder provides a window to identify the EGD Configurati
EGD every 3 months for 1 year, then every 6 months for 1 year, then annually If treated for low-grade dysplasia: If complete eradication is achieved, an initial post-eradication EGD can be performed at 3-6 months. Surveillance by EGD is then continued every yea
MVI56-EGD ControlLogix Platform Start Here GE Ethernet Global Data Communication Module User Manual ProSoft Technology, Inc. Page 9 of 112 March 3, 2021 Guide to the MVI56-EGD User Manual Function Section to Read Details Introduction (Must Do) Start Here (page 11
–EGD portion of procedure reported with 43239 –Laboratory test for detection of H. pylori reported separately 32 EGD with Biopsy Procedure –During EGD biopsy forceps are passed through a channel in the endoscope –Biopsy obtained with forceps –Forceps and biops
FS-8704-12 GE-EGD Driver Manual Page 3 of 23 FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com 1 GE-EGD (ETHERNET GLOBAL DATA) DESCRIPTION The GE-EGD (Ethernet Global Data) driver allo
The EGD – a Transformative Agenda . The European Green Deal (EGD) was the top priority of Ursula von der Leyen when she faced the European Parliament vote on her candidacy for Commission President and sought to obtain support from Heads of Government across the Member States. The EGD an
purposively selected EGD teachers from schools located in the UThukela district. The criteria for their selection was that they had to be teaching grade 11 and 12 EGD. SCK Vs Bloom's revised taxonomy Instructional strategies Kn
a group level, or would be more usefully reported at business segment level. In some instances it may be more appropriate to report separately KPIs for each business segment if the process of aggregation renders the output meaningless. For example it is clearly more informative to report a retail business segment separately rather than combining it with a personal fi nancial services segment .
