HOW TO USE THIS INSTALL GUIDE - Amazon S3

3y ago
93 Views
2 Downloads
4.72 MB
313 Pages
Last View : 19d ago
Last Download : 2m ago
Upload by : Emanuel Batten
Transcription

SELECT VEHICLEPRINT PAGES NEEDEDHOW TO USE THIS INSTALL GUIDE1Open the Bookmarks menu and find your vehicle OR scrolldown until you find the install guide for your vehicle.2Print only the pages for your vehicle using the advancedoptions in the Print menu.3Install your Maestro RR according to the guide for your vehicle.WARNINGPressing the printer icon or “quick printing” this document will printall of the guides in this compilation.NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here inare the properties of their respective owners.

INSTALL GUIDEScion FR-S2013-2016Retains factory amplifier, steering wheel controls, and more!PRODUCTS REQUIREDOPTIONAL ACCESSORIESPROGRAMMED FIRMWAREiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro TO1 Installation Harness ADS-RR(SR)-TOY01-DSNOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used herein are the properties of their respective owners.

Scion FR-S 2013-2016WELCOMETABLE OF CONTENTSCongratulations on the purchaseof your iDatalink Maestro RR Radioreplacement solution. You arenow a few simple steps away fromenjoying your new car radio withenhanced features.Installation Instructions3Wiring Diagram4Radio Wire Reference Chart5Before starting your installation,please ensure that your iDatalinkMaestro module is programmedwith the correct firmware for yourvehicle and that you carefully reviewthe install guide.Vehicle Wire Reference Chart6Please note that Maestro RR willonly retain functionalities thatwere originally available in thevehicle.NEED hELP?1 866 /supportwww.12voltdata.com/forumAutomotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com2

Scion FR-S 2013-2016INSTALLATION INSTRUCTIONSSTEP 1TROUBLESHOOTING TIPS: To reset the module back its factory settings, turn the keyto the OFF position then disconnect all connectors fromthe module. Press and hold the module’s programmingbutton and connect all the connectors back to the module.Wait, the module’s LED will flash RED rapidly (this maytake up to 10 seconds). Release the programming button.Wait, the LED will turn solid GREEN for 2 seconds. Unbox the aftermarket radio and locate its main harness. Connect the wires shown on the next page fromaftermarket radio main harness to the TO1 T-harness andmatch the wire functions. Remove the factory radio. For technical assistance call 1-866-427-2999 or e-mail“support@idatalink.com”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”STEP 2 If the vehicle is equipped with an OEM backup camera,connect the TO1 T-harness to the backup camera harness(see wire chart for details).STEP 3 Identify if your vehicle has a 20 or 28 pin secondaryconnector. Assemble TO1 T-harness as shown onwiring diagram. Connect the factory harness to the TO1T-harness.STEP 4 Plug the OBDII connector into the OBDII of the vehicle,under driver dash.STEP 5 Plug the aftermarket radio harnesses into the aftermarketradio. Connect the backup camera RCA cable into theaftermarket radio (if equipped). Connect the auxiliary RCA cables into the aftermarket radio(if equipped). Plug the Data cable to the data port of the aftermarketradio. Insert the Audio cable into the iDatalink 3.5 mm audio jackof the aftermarket radio.NOTE:In Pioneer radios: plug Audio cable in auxiliary input ofthe radio.STEP 6 Connect all the harnesses to the Maestro RR module thentest your installation.2Automotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com3

Scion FR-S 2013-2016WIRING DIAGRAM without an AmplifierSTEP 5STEP 1WHITE - LF SPEAKER ( )WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER ( )GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER ( )GREEN/BLACK - LR SPEAKER (-)PURPLE - RR SPEAKER ( )PURPLE/BLACK - RR SPEAKER (-)BLUE/WHITE - AMP. TURN ON ( )BLACK - GROUNDRED - ACCESSORY ( )YELLOW - 12V ( )ORANGE - ILLUMINATION ( )PURPLE/WHITE - REVERSE LIGHT ( )LTGREEN - E-BRAKE (-)PINK - VEHICLE SPEEDYELLOW/BLACK - FOOT BRAKEMAINHARNESSCONNECT TOAFTERMARKET RADIOSEE AFTERMARKETRADIO GUIDEFOR RADIO WIRECOLORSRCA CABLESAUX INBACKUP CAMSTEP 2REVERSE CAMERA HARNESSCONNECT IF EQUIPPEDBLUE/YELLOW - CAM. POWER ( )BLACK - GROUND (-)YELLOW - VIDEO ( )BROWN - VIDEO (-)STEP 3SEE WIRECHARTDATACABLEAUDIOCABLEFACTORY RADIO HARNESSWIRES FROMVEHICLESTEP 6ACONNECT 20 OR 28 PIN CABLESTEP 4HMAESTRO RR MODULEOBDII CONNECTORCAHGFCDFTO1 T-HARNESSDG2Automotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com4

Scion FR-S 2013-2016RADIO WIRE REFERENCE CHARTWireDescriptionPolarityWire Color on MaestroT-HarnessWire Color on Alpine cableWire Color on Kenwood cableWire Color on Pioneer cableIllumination( )OrangeN/AOrange/WhiteOrange/WhiteReverse Light( -Brake(-)Lt GreenYellow/BlueLt GreenLt GreenFoot Brake( )Yellow/BlackYellow/BlackN/AN/AVSS (vehicle speed sensor)(DATA)PinkGreen/WhiteN/APinkAutomotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com5

Scion FR-S 2013-2016VEHICLE WIRE REFERENCE nectorTypePositionWire ColorPolarityWireLocationCamera Power 24 pin11White( )Reverse camera harnessGround 24 pin23Red(-)Reverse camera harnessVideo 24 pin12Black( )Reverse camera harnessVideo - 24 pin24Orange(-)Reverse camera harnessREVERSE CAMERA CONNECTOR (WIRE SIDE)12 11 10 98765432124 23 22 21 20 19 18 17 16 15 14 13Automotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com6

INSTALL GUIDEScion iM2016Retains factory amplifier, steering wheel controls, and more!PRODUCTS REQUIREDOPTIONAL ACCESSORIESPROGRAMMED FIRMWAREiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro TO1 Installation Harness ADS-RR(SR)-TOY01-DSNOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used herein are the properties of their respective owners.

Scion iM 2016WELCOMETABLE OF CONTENTSCongratulations on the purchaseof your iDatalink Maestro RR Radioreplacement solution. You arenow a few simple steps away fromenjoying your new car radio withenhanced features.Installation Instructions3Wiring Diagram4Radio Wire Reference Chart5Before starting your installation,please ensure that your iDatalinkMaestro module is programmedwith the correct firmware for yourvehicle and that you carefully reviewthe install guide.Vehicle Wire Reference Chart6Please note that Maestro RR willonly retain functionalities thatwere originally available in thevehicle.NEED hELP?1 866 /supportwww.12voltdata.com/forumAutomotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com2

Scion iM 2016INSTALLATION INSTRUCTIONSSTEP 1TROUBLESHOOTING TIPS: To reset the module back its factory settings, turn the keyto the OFF position then disconnect all connectors fromthe module. Press and hold the module’s programmingbutton and connect all the connectors back to the module.Wait, the module’s LED will flash RED rapidly (this maytake up to 10 seconds). Release the programming button.Wait, the LED will turn solid GREEN for 2 seconds. Unbox the aftermarket radio and locate its main harness. Connect the wires shown on the next page fromaftermarket radio main harness to the TO1 T-harness andmatch the wire functions. Remove the factory radio. For technical assistance call 1-866-427-2999 or e-mail“support@idatalink.com”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”STEP 2 If the vehicle is equipped with an OEM backup camera,connect the TO1 T-harness to the backup camera harness(see wire chart for details).STEP 3 Identify if your vehicle has a 20 or 28 pin secondaryconnector. Assemble TO1 T-harness as shown onwiring diagram. Connect the factory harness to the TO1T-harness.STEP 4 Plug the OBDII connector into the OBDII of the vehicle,under driver dash.STEP 5 Plug the aftermarket radio harnesses into the aftermarketradio. Connect the backup camera RCA cable into theaftermarket radio (if equipped). Connect the auxiliary RCA cables into the aftermarket radio(if equipped). Plug the Data cable to the data port of the aftermarketradio. Insert the Audio cable into the iDatalink 3.5 mm audio jackof the aftermarket radio.NOTE:In Pioneer radios: plug Audio cable in auxiliary input ofthe radio.STEP 6 Connect all the harnesses to the Maestro RR module thentest your installation.2Automotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com3

Scion iM 2016WIRING DIAGRAM without an AmplifierSTEP 5STEP 1WHITE - LF SPEAKER ( )WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER ( )GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER ( )GREEN/BLACK - LR SPEAKER (-)PURPLE - RR SPEAKER ( )PURPLE/BLACK - RR SPEAKER (-)BLUE/WHITE - AMP. TURN ON ( )BLACK - GROUNDRED - ACCESSORY ( )YELLOW - 12V ( )ORANGE - ILLUMINATION ( )PURPLE/WHITE - REVERSE LIGHT ( )LTGREEN - E-BRAKE (-)PINK - VEHICLE SPEEDYELLOW/BLACK - FOOT BRAKEMAINHARNESSCONNECT TOAFTERMARKET RADIOSEE AFTERMARKETRADIO GUIDEFOR RADIO WIRECOLORSRCA CABLESAUX INBACKUP CAMSTEP 2REVERSE CAMERA HARNESSCONNECT IF EQUIPPEDBLUE/YELLOW - CAM. POWER ( )BLACK - GROUND (-)YELLOW - VIDEO ( )BROWN - VIDEO (-)STEP 3SEE WIRECHARTDATACABLEAUDIOCABLEFACTORY RADIO HARNESSWIRES FROMVEHICLESTEP 6ACONNECT 20 OR 28 PIN CABLESTEP 4HMAESTRO RR MODULEOBDII CONNECTORCAHGFCDFTO1 T-HARNESSDG2Automotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com4

Scion iM 2016RADIO WIRE REFERENCE CHARTWireDescriptionPolarityWire Color on MaestroT-HarnessWire Color on Alpine cableWire Color on Kenwood cableWire Color on Pioneer cableIllumination( )OrangeN/AOrange/WhiteOrange/WhiteReverse Light( -Brake(-)Lt GreenYellow/BlueLt GreenLt GreenFoot Brake( )Yellow/BlackYellow/BlackN/AN/AVSS (vehicle speed sensor)(DATA)PinkGreen/WhiteN/APinkAutomotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com5

Scion iM 2016VEHICLE WIRE REFERENCE nectorTypePositionWire ColorPolarityWireLocationCamera Power 24 pin11Red( )Reverse camera harnessGround 24 pin23Shield(-)Reverse camera harnessVideo 24 pin12Black( )Reverse camera harnessVideo - 24 pin24White(-)Reverse camera harnessREVERSE CAMERA CONNECTORS (WIRE SIDE)12 11 10 98765432124 23 22 21 20 19 18 17 16 15 14 13Automotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com6

INSTALL GUIDEScion iQ2012-2015Retains factory amplifier, steering wheel controls, and more!PRODUCTS REQUIREDOPTIONAL ACCESSORIESPROGRAMMED FIRMWAREiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro TO1 Installation Harness ADS-RR(SR)-TOY01-DSNOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used herein are the properties of their respective owners.

Scion iQ 2012-2015WELCOMETABLE OF CONTENTSCongratulations on the purchaseof your iDatalink Maestro RR Radioreplacement solution. You arenow a few simple steps away fromenjoying your new car radio withenhanced features.Installation Instructions3Wiring Diagram4Radio Wire Reference Chart5Before starting your installation,please ensure that your iDatalinkMaestro module is programmedwith the correct firmware for yourvehicle and that you carefully reviewthe install guide.Vehicle Wire Reference Chart6Please note that Maestro RR willonly retain functionalities thatwere originally available in thevehicle.NEED hELP?1 866 /supportwww.12voltdata.com/forumAutomotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com2

Scion iQ 2012-2015INSTALLATION INSTRUCTIONSSTEP 1TROUBLESHOOTING TIPS: To reset the module back its factory settings, turn the keyto the OFF position then disconnect all connectors fromthe module. Press and hold the module’s programmingbutton and connect all the connectors back to the module.Wait, the module’s LED will flash RED rapidly (this maytake up to 10 seconds). Release the programming button.Wait, the LED will turn solid GREEN for 2 seconds. Unbox the aftermarket radio and locate its main harness. Connect the wires shown on the next page fromaftermarket radio main harness to the TO1 T-harness andmatch the wire functions. Remove the factory radio. For technical assistance call 1-866-427-2999 or e-mail“support@idatalink.com”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”STEP 2 If the vehicle is equipped with an OEM backup camera,connect the TO1 T-harness to the backup camera harness(see wire chart for details).STEP 3 Identify if your vehicle has a 20 or 28 pin secondaryconnector. Assemble TO1 T-harness as shown onwiring diagram. Connect the factory harness to the TO1T-harness.STEP 4 Plug the OBDII connector into the OBDII of the vehicle,under driver dash.STEP 5 Plug the aftermarket radio harnesses into the aftermarketradio. Connect the backup camera RCA cable into theaftermarket radio (if equipped). Connect the auxiliary RCA cables into the aftermarket radio(if equipped). Plug the Data cable to the data port of the aftermarketradio. Insert the Audio cable into the iDatalink 3.5 mm audio jackof the aftermarket radio.NOTE:In Pioneer radios: plug Audio cable in auxiliary input ofthe radio.STEP 6 Connect all the harnesses to the Maestro RR module thentest your installation.2Automotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com3

Scion iQ 2012-2015WIRING DIAGRAM without an AmplifierSTEP 5STEP 1WHITE - LF SPEAKER ( )WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER ( )GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER ( )GREEN/BLACK - LR SPEAKER (-)PURPLE - RR SPEAKER ( )PURPLE/BLACK - RR SPEAKER (-)BLUE/WHITE - AMP. TURN ON ( )BLACK - GROUNDRED - ACCESSORY ( )YELLOW - 12V ( )ORANGE - ILLUMINATION ( )PURPLE/WHITE - REVERSE LIGHT ( )LTGREEN - E-BRAKE (-)PINK - VEHICLE SPEEDYELLOW/BLACK - FOOT BRAKEMAINHARNESSCONNECT TOAFTERMARKET RADIOSEE AFTERMARKETRADIO GUIDEFOR RADIO WIRECOLORSRCA CABLESAUX INBACKUP CAMSTEP 2REVERSE CAMERA HARNESSCONNECT IF EQUIPPEDBLUE/YELLOW - CAM. POWER ( )BLACK - GROUND (-)YELLOW - VIDEO ( )BROWN - VIDEO (-)STEP 3SEE WIRECHARTDATACABLEAUDIOCABLEFACTORY RADIO HARNESSWIRES FROMVEHICLESTEP 6ACONNECT 20 OR 28 PIN CABLESTEP 4HMAESTRO RR MODULEOBDII CONNECTORCAHGFCDFTO1 T-HARNESSDG2Automotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com4

Scion iQ 2012-2015RADIO WIRE REFERENCE CHARTWireDescriptionPolarityWire Color on MaestroT-HarnessWire Color on Alpine cableWire Color on Kenwood cableWire Color on Pioneer cableIllumination( )OrangeN/AOrange/WhiteOrange/WhiteReverse Light( -Brake(-)Lt GreenYellow/BlueLt GreenLt GreenFoot Brake( )Yellow/BlackYellow/BlackN/AN/AVSS (vehicle speed sensor)(DATA)PinkGreen/WhiteN/APinkAutomotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com5

Scion iQ 2012-2015VEHICLE WIRE REFERENCE CHARTREVERSE CAMERA NOT AVAILABLE / NOT PRESENTAutomotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com6

INSTALL GUIDEScion tC2007-2016Retains factory amplifier, steering wheel controls, and more!PRODUCTS REQUIREDOPTIONAL ACCESSORIESPROGRAMMED FIRMWAREiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro TO1 Installation Harness ADS-RR(SR)-TOY01-DSNOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used herein are the properties of their respective owners.

Scion tC 2007-2016WELCOMETABLE OF CONTENTSCongratulations on the purchaseof your iDatalink Maestro RR Radioreplacement solution. You arenow a few simple steps away fromenjoying your new car radio withenhanced features.Installation Instructions3Wiring Diagram4Radio Wire Reference Chart5Before starting your installation,please ensure that your iDatalinkMaestro module is programmedwith the correct firmware for yourvehicle and that you carefully reviewthe install guide.Vehicle Wire Reference Chart6Please note that Maestro RR willonly retain functionalities thatwere originally available in thevehicle.NEED hELP?1 866 /supportwww.12voltdata.com/forumAutomotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com2

Scion tC 2007-2016INSTALLATION INSTRUCTIONSSTEP 1TROUBLESHOOTING TIPS: To reset the module back its factory settings, turn the keyto the OFF position then disconnect all connectors fromthe module. Press and hold the module’s programmingbutton and connect all the connectors back to the module.Wait, the module’s LED will flash RED rapidly (this maytake up to 10 seconds). Release the programming button.Wait, the LED will turn solid GREEN for 2 seconds. Unbox the aftermarket radio and locate its main harness. Connect the wires shown on the next page fromaftermarket radio main harness to the TO1 T-harness andmatch the wire functions. Remove the factory radio. For technical assistance call 1-866-427-2999 or e-mail“support@idatalink.com”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”STEP 2 If the vehicle is equipped with an OEM backup camera,connect the TO1 T-harness to the backup camera harness(see wire chart for details).STEP 3 Identify if your vehicle has a 20 or 28 pin secondaryconnector. Assemble TO1 T-harness as shown onwiring diagram. Connect the factory harness to the TO1T-harness.STEP 4 Plug the OBDII connector into the OBDII of the vehicle,under driver dash.STEP 5 Plug the aftermarket radio harnesses into the aftermarketradio. Connect the backup camera RCA cable into theaftermarket radio (if equipped). Connect the auxiliary RCA cables into the aftermarket radio(if equipped). Plug the Data cable to the data port of the aftermarketradio. Insert the Audio cable into the iDatalink 3.5 mm audio jackof the aftermarket radio.NOTE:In Pioneer radios: plug Audio cable in auxiliary input ofthe radio.STEP 6 Connect all the harnesses to the Maestro RR module thentest your installation.2Automotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com3

Scion tC 2007-2016WIRING DIAGRAM without an AmplifierSTEP 5STEP 1WHITE - LF SPEAKER ( )WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER ( )GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER ( )GREEN/BLACK - LR SPEAKER (-)PURPLE - RR SPEAKER ( )PURPLE/BLACK - RR SPEAKER (-)BLUE/WHITE - AMP. TURN ON ( )BLACK - GROUNDRED - ACCESSORY ( )YELLOW - 12V ( )ORANGE - ILLUMINATION ( )PURPLE/WHITE - REVERSE LIGHT ( )LTGREEN - E-BRAKE (-)PINK - VEHICLE SPEEDYELLOW/BLACK - FOOT BRAKEMAINHARNESSCONNECT TOAFTERMARKET RADIOSEE AFTERMARKETRADIO GUIDEFOR RADIO WIRECOLORSRCA CABLESAUX INBACKUP CAMSTEP 2REVERSE CAMERA HARNESSCONNECT IF EQUIPPEDBLUE/YELLOW - CAM. POWER ( )BLACK - GROUND (-)YELLOW - VIDEO ( )BROWN - VIDEO (-)STEP 3SEE WIRECHARTDATACABLEAUDIOCABLEFACTORY RADIO HARNESSWIRES FROMVEHICLESTEP 6ACONNECT 20 OR 28 PIN CABLESTEP 4HMAESTRO RR MODULEOBDII CONNECTORCAHGFCDFTO1 T-HARNESSDG2Automotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com4

Scion tC 2007-2016RADIO WIRE REFERENCE CHARTWireDescriptionPolarityWire Color on MaestroT-HarnessWire Color on Alpine cableWire Color on Kenwood cableWire Color on Pioneer cableIllumination( )OrangeN/AOrange/WhiteOrange/WhiteReverse Light( -Brake(-)Lt GreenYellow/BlueLt GreenLt GreenFoot Brake( )Yellow/BlackYellow/BlackN/AN/AVSS (vehicle speed sensor)(DATA)PinkGreen/WhiteN/APinkAutomotive Data Solutions Inc. 2018ADS-RR(SR)-TOY01-DSmaestro.idatalink.com

aftermarket radio (if equipped). Connect the auxiliary RCA cables into the aftermarket radio (if equipped). Plug the Data cable to the data port of the aftermarket radio. Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio. NOTE: In Pioneer radios: plug Audio cable in auxiliary input of the radio. STEP 6

Related Documents:

work/products (Beading, Candles, Carving, Food Products, Soap, Weaving, etc.) ⃝I understand that if my work contains Indigenous visual representation that it is a reflection of the Indigenous culture of my native region. ⃝To the best of my knowledge, my work/products fall within Craft Council standards and expectations with respect to

In the 26 years since 有iley publìshed Organic 1于ze Disconnection Approach 色y Stuart Warren,由自approach to the learning of synthesis has become while the book Ìtself is now dated in content and appearance' In 唱Tiley published Organic and Control by Paul Wyatt and Stuart 轧Tarren. Thís muc如柱。okís as a

Contents iii Cisco Smart Install Configuration Guide OL-28027-01 CONTENTS Introduction 1-1 Smart Install Director 1-3 Image List File 1-5 Configuration Files 1-6 Smart Install Clients 1-6 Smart Install Groups 1-9 DHCP and Smart Install 1-10 Adding a Client Switch to the Network 1-11 Backing Up the Client Configuration 1-1

3. Install Front backing plate 4. Front portal box assembly 5. Install front portal box 6. Install front drive shaft nut & portal box lid cap 7. Assemble all brake rotors and wheel hubs 8. Install front brake rotor assembly 9. Install front brake calipers 10. Install and route front brake lines REAR INSTALLATION STEPS 11. Prepare vehicle, rear 12.

INSTALL PLATFORMIO In the command prompt type: platformio - pip install platformio && pip install --egg scons or just: pip install platformio . 7. INSTALL TOUCHDEVELOP LOCAL Create a folder to save the files for TouchDevelop. N

MaxCS SCCM Client Remote Deployment Guide Page 4 of 24 2. Install the following components on the server: Create the recommended disk drives for Configuration Manager Install IIS, RDC, BITS Install and configure Microsoft SQL Server 2017 Install and configure WSUS Install latest Windows 10 ADK Ext

QUICK INSTALL GUIDE Model number: EP200G101-M240US00 Install the Enphase Enpower Smart Switch To install the Enphase Enpower smart switch and the Enphase Enpower wall-mount bracket, read and

Insert the GIGABYTE motherboard driver disk. "Xpress Install" will automatically scan your system and list all of the drivers that are recommended to install. Click the Install All button and "Xpress Install" will install all of the selected drivers, including the I