Safety Data Sheet MasterSeal SL 2FIN SLG Lst Also .
Safety Data SheetMasterSeal SL 2FIN SLG lst also SONOLASTIC SL2 FINISHSLG LSTRevision date : 2015/05/29Version: 2.0Page: 1/11(30606610/SDS GEN US/EN)1. IdentificationProduct identifier used on the labelMasterSeal SL 2FIN SLG lst also SONOLASTIC SL2FINISH SLG LSTRecommended use of the chemical and restriction on useRecommended use*: for industrial and professional users* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part ofthe seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express orimplied, including by incorporation into or reference in the seller's sales agreement.Details of the supplier of the safety data sheetCompany:BASF CORPORATION100 Park AvenueFlorham Park, NJ 07932, USATelephone: 1 973 245-6000Emergency telephone numberCHEMTREC: 1-800-424-9300BASF HOTLINE: 1-800-832-HELP (4357)Other means of identificationSynonyms:Not Available2. Hazards IdentificationAccording to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200Classification of the productFlam. Liq.Label elementsPictogram:3Flammable liquids
Safety Data SheetMasterSeal SL 2FIN SLG lst also SONOLASTIC SL2 FINISHSLG LSTRevision date : 2015/05/29Version: 2.0Page: 2/11(30606610/SDS GEN US/EN)Signal Word:WarningHazard Statement:H226Flammable liquid and vapour.Precautionary Statements (Prevention):P210Keep away from heat, hot surfaces, sparks, open flames and otherignition sources. No smoking.P280Wear protective gloves and eye/face protection.P243Take precautionary measures against static discharge.P241Use explosion-proof electrical/ventilating/lighting/equipment.P233Keep container tightly closed.P240Ground/bond container and receiving equipment.P242Use only non-sparking tools.Precautionary Statements (Response):P303 P361 P353IF ON SKIN (or hair): Take off immediately all contaminated clothing.Rinse skin with water/shower.P370 P378In case of fire: Use alcohol-resistant foam, carbon dioxide, dry powderor water spray for extinction.Precautionary Statements (Storage):P403 P235Store in a well-ventilated place. Keep cool.Precautionary Statements (Disposal):P501Dispose of contents/container to hazardous or special waste collectionpoint.Hazards not otherwise classifiedIf applicable information is provided in this section on other hazards which do not result inclassification but which may contribute to the overall hazards of the substance or mixture.3. Composition / Information on IngredientsAccording to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200CAS 82530-83-8Weight % 10.0 - 25.0% 7.0 - 20.0% 5.0 - 7.0% 3.0 - 5.0% 0.3 - 1.0% 0.2 - 0.3%Chemical nameLimestoneCalcium carbonateStoddard solventTitanium dioxidecalcium oxidetrimethoxy(3-(oxiranylmethoxy)propyl)silane
Safety Data SheetMasterSeal SL 2FIN SLG lst also SONOLASTIC SL2 FINISHSLG LSTRevision date : 2015/05/29Version: 2.0Page: 3/11(30606610/SDS GEN US/EN)4. First-Aid MeasuresDescription of first aid measuresGeneral advice:First aid personnel should pay attention to their own safety. Immediately remove contaminatedclothing.If inhaled:If difficulties occur after vapour/aerosol has been inhaled, remove to fresh air and seek medicalattention.If on skin:After contact with skin, wash immediately with plenty of water and soap. Under no circumstancesshould organic solvent be used. If irritation develops, seek medical attention.If in eyes:Wash affected eyes for at least 15 minutes under running water with eyelids held open, consult aneye specialist.If swallowed:Rinse mouth immediately and then drink plenty of water, seek medical attention. Do not inducevomiting unless told to by a poison control center or doctor.Most important symptoms and effects, both acute and delayedSymptoms: The most important known symptoms and effects are described in the labelling (seesection 2) and/or in section 11.Hazards: No applicable information available.Indication of any immediate medical attention and special treatment neededNote to physicianTreatment:Treat according to symptoms (decontamination, vital functions), noknown specific antidote.5. Fire-Fighting MeasuresExtinguishing mediaSuitable extinguishing media:foam, water spray, dry powder, carbon dioxideUnsuitable extinguishing media for safety reasons:water jetSpecial hazards arising from the substance or mixtureHazards during fire-fighting:carbon dioxide, carbon monoxide, harmful vapours, nitrogen oxides, fumes/smoke, carbon black
Safety Data SheetMasterSeal SL 2FIN SLG lst also SONOLASTIC SL2 FINISHSLG LSTRevision date : 2015/05/29Version: 2.0Page: 4/11(30606610/SDS GEN US/EN)Advice for fire-fightersProtective equipment for fire-fighting:Wear a self-contained breathing apparatus.Further information:The degree of risk is governed by the burning substance and the fire conditions. If exposed to fire,keep containers cool by spraying with water. Collect contaminated extinguishing water separately, donot allow to reach sewage or effluent systems. Contaminated extinguishing water must be disposedof in accordance with official regulations.6. Accidental release measuresPersonal precautions, protective equipment and emergency proceduresDo not breathe vapour/aerosol/spray mists. Wear eye/face protection. If exposed to high vapourconcentration, leave area immediately. Use personal protective clothing. Handle in accordance withgood building materials hygiene and safety practice.Environmental precautionsContain contaminated water/firefighting water. Do not discharge into drains/surfacewaters/groundwater.Methods and material for containment and cleaning upFor small amounts: Pick up with inert absorbent material (e.g. sand, earth etc.). Dispose ofcontaminated material as prescribed.For large amounts: Pump off product.7. Handling and StoragePrecautions for safe handlingAvoid aerosol formation. Avoid inhalation of mists/vapours. Avoid skin contact. No special measuresnecessary provided product is used correctly.Conditions for safe storage, including any incompatibilitiesNo applicable information available.Further information on storage conditions: Keep only in the original container in a cool, dry, wellventilated place away from ignition sources, heat or flame. Protect from direct sunlight.8. Exposure Controls/Personal ProtectionComponents with occupational exposure limitsCalcium carbonateOSHA PELPEL 5 mg/m3 Respirable fraction ; PEL 15mg/m3 Total dust ; TWA value 15 mg/m3 Totaldust ; TWA value 5 mg/m3 Respirable fraction;calcium oxideOSHA PELACGIH TLVPEL 5 mg/m3 ; TWA value 5 mg/m3 ;TWA value 2 mg/m3 ;
Safety Data SheetMasterSeal SL 2FIN SLG lst also SONOLASTIC SL2 FINISHSLG LSTRevision date : 2015/05/29Version: 2.0Page: 5/11(30606610/SDS GEN US/EN)LimestoneOSHA PELPEL 5 mg/m3 Respirable fraction ; PEL 15mg/m3 Total dust ; TWA value 15 mg/m3 Totaldust ; TWA value 5 mg/m3 Respirable fraction;Titanium dioxideOSHA PELACGIH TLVPEL 15 mg/m3 Total dust ; TWA value 10mg/m3 Total dust ;TWA value 10 mg/m3 ;OSHA PELACGIH TLVPEL 500 ppm 2,900 mg/m3 ;TWA value 100 ppm ;Stoddard solventAdvice on system design:No applicable information available.Personal protective equipmentRespiratory protection:Wear respiratory protection if ventilation is inadequate.Hand protection:Wear chemical resistant protective gloves., Manufacturer's directions for use should be observedbecause of great diversity of types.Eye protection:Safety glasses with side-shields.Body protection:light protective clothingGeneral safety and hygiene measures:Do not inhale gases/vapours/aerosols. Avoid contact with the skin, eyes and clothing. Avoidexposure - obtain special instructions before use. Handle in accordance with good building materialshygiene and safety practice. Wearing of closed work clothing is recommended. When using, do noteat, drink or smoke. Hands and/or face should be washed before breaks and at the end of the shift.At the end of the shift the skin should be cleaned and skin-care agents applied. Gloves must beinspected regularly and prior to each use. Replace if necessary (e.g. pinhole leaks).9. Physical and Chemical PropertiesForm:Odour:Odour threshold:Colour:pH value:Melting point:Boiling point:Sublimation point:Flash point:Flammability:Lower explosion limit:Upper explosion limit:Vapour pressure:liquidsolvent-likeNo applicable information available.various coloursslightly alkalineNo applicable information available.153.33 - 251.11 CNo applicable information available.136 Fnot determined0.9 %(V)7.0 %(V)The product has not been tested.(ASTM D3278)
Safety Data SheetMasterSeal SL 2FIN SLG lst also SONOLASTIC SL2 FINISHSLG LSTRevision date : 2015/05/29Version: 2.0Density:Relative density:Vapour density:Partitioning coefficient noctanol/water (log Pow):Thermal decomposition:Viscosity, dynamic:Viscosity, kinematic:Solubility in water:Solubility (quantitative):Solubility (qualitative):Evaporation rate:Other Information:Page: 6/11(30606610/SDS GEN US/EN)1.00 g/cm3( 20 C)No applicable information available.Heavier than air.No data available.No decomposition if stored and handled asprescribed/indicated.No applicable information available.No applicable information available.slightly solubleNo applicable information available.No applicable information available.No applicable information available.If necessary, information on other physical and chemicalparameters is indicated in this section.10. Stability and ReactivityReactivityNo hazardous reactions if stored and handled as prescribed/indicated.Oxidizing properties:Based on its structural properties the product is not classified as oxidizing.Chemical stabilityThe product is stable if stored and handled as prescribed/indicated.Possibility of hazardous reactionsThe product is stable if stored and handled as prescribed/indicated.Conditions to avoidSee MSDS section 7 - Handling and storage.Incompatible materialsstrong acids, strong bases, strong oxidizing agents, strong reducing agentsHazardous decomposition productsDecomposition products:No hazardous decomposition products if stored and handled as prescribed/indicated.Thermal decomposition:No decomposition if stored and handled as prescribed/indicated.11. Toxicological informationPrimary routes of exposureRoutes of entry for solids and liquids are ingestion and inhalation, but may include eye or skincontact. Routes of entry for gases include inhalation and eye contact. Skin contact may be a routeof entry for liquefied gases.Acute Toxicity/Effects
Safety Data SheetMasterSeal SL 2FIN SLG lst also SONOLASTIC SL2 FINISHSLG LSTRevision date : 2015/05/29Version: 2.0Page: 7/11(30606610/SDS GEN US/EN)Acute toxicityAssessment of acute toxicity: Virtually nontoxic after a single ingestion. Based on available Data, theclassification criteria are not met.OralNo applicable information available.InhalationNo applicable information available.DermalNo applicable information available.Irritation / corrosionAssessment of irritating effects: No irritation is expected under intended use and appropriatehandling. Based on available Data, the classification criteria are not met.SensitizationAssessment of sensitization: Based on available Data, the classification criteria are not met.Chronic Toxicity/EffectsRepeated dose toxicityAssessment of repeated dose toxicity: No reliable data was available concerning repeated dosetoxicity. Based on available Data, the classification criteria are not met.Genetic toxicityAssessment of mutagenicity: The chemical structure does not suggest a specific alert for such aneffect. Based on available Data, the classification criteria are not met.CarcinogenicityAssessment of carcinogenicity: The chemical structure does not suggest a specific alert for such aneffect. Based on available Data, the classification criteria are not met.Information on: Titanium dioxideAssessment of carcinogenicity: IARC (International Agency for Research on Cancer) has classifiedthis substance as group 2B (The agent is possibly carcinogenic to humans). In long-term studies inrats in which the substance was given by inhalation, a carcinogenic effect was observed. Tumorswere only observed in rats after chronic inhalative exposure to high concentrations which causedsustained lung inflammation. In long-term studies in rats and mice in which the substance was givenby feed, a carcinogenic effect was not observed. Dermal exposure is not expected to becarcinogenic.Information on: crystalline silicaAssessment of carcinogenicity: In long-term studies in rats and mice in which the substance wasgiven by feed, a carcinogenic effect was not observed. In long-term animal studies in which thesubstance was given by inhalation in high doses, a carcinogenic effect was observed. The substanceand its compounds in the form of respirable dusts/aerosolsis classified by the German MAKcommision as a category 1 carcinogen (substances that cause cancer to humans). A carcinogeniceffect cannot safely be ruled out. The inhalation uptake of the alveolar fraction of the fine dust maycause damage to the lungs. The International Agency for Research on Cancer (IARC) has classifiedthis substance as a Group 1 (known) human carcinogen.NTP listed carcinogen----------------------------------
Safety Data SheetMasterSeal SL 2FIN SLG lst also SONOLASTIC SL2 FINISHSLG LSTRevision date : 2015/05/29Version: 2.0Page: 8/11(30606610/SDS GEN US/EN)Reproductive toxicityAssessment of reproduction toxicity: The chemical structure does not suggest a specific alert forsuch an effect. Based on available Data, the classification criteria are not met.TeratogenicityAssessment of teratogenicity: The chemical structure does not suggest a specific alert for such aneffect. Based on available Data, the classification criteria are not met.Other InformationBased on our experience and the information available, no adverse health effects are expected ifhandled as recommended with suitable precautions for designated uses. The product has not beentested. The statements on toxicology have been derived from the properties of the individualcomponents.Symptoms of ExposureThe most important known symptoms and effects are described in the labelling (see section 2)and/or in section 11.12. Ecological InformationToxicityAquatic toxicityAssessment of aquatic toxicity:Based on available Data, the classification criteria are not met. There is a high probability that theproduct is not acutely harmful to aquatic organisms.Persistence and degradabilityAssessment biodegradation and elimination (H2O)Inherently biodegradable. The insoluble fraction can be removed by mechanical means in suitablewaste water treatment plants.The polymer component of the product is poorly biodegradable.Bioaccumulative potentialAssessment bioaccumulation potentialDischarge into the environment must be avoided.Mobility in soilAssessment transport between environmental compartmentsNo data available.Additional informationOther ecotoxicological advice:Do not discharge product into the environment without control. The product has not been tested. Thestatements on ecotoxicology have been derived from the properties of the individual components.
Safety Data SheetMasterSeal SL 2FIN SLG lst also SONOLASTIC SL2 FINISHSLG LSTRevision date : 2015/05/29Version: 2.0Page: 9/11(30606610/SDS GEN US/EN)13. Disposal considerationsWaste disposal of substance:Dispose of in accordance with national, state and local regulations. Residues should be disposed ofin the same manner as the substance/product. Do not discharge into drains/surfacewaters/groundwater.Container disposal:Contaminated packaging should be emptied as far as possible; then it can be passed on forrecycling after being thoroughly cleaned.14. Transport InformationLand transportUSDOTHazard class:Packing group:ID number:Hazard label:Proper shipping name:CIIINA 1993CBLCOMBUSTIBLE LIQUID, N.O.S. (contains STODDARD SOLVENT)Classified as combustible liquid in containers greater than 119gallons.Sea transportIMDGHazard class:Packing group:ID number:Hazard label:Marine pollutant:Proper shipping name:3IIIUN 19933NOFLAMMABLE LIQUID, N.O.S. (contains STODDARD SOLVENT)Air transportIATA/ICAOHazard class:Packing group:ID number:Hazard label:Proper shipping name:3IIIUN 19933FLAMMABLE LIQUID, N.O.S. (contains STODDARD SOLVENT)15. Regulatory InformationFederal RegulationsRegistration status:ChemicalTSCA, USreleased / listedEPCRA 311/312 (Hazard categories):Fire;
Safety Data SheetMasterSeal SL 2FIN SLG lst also SONOLASTIC SL2 FINISHSLG LSTRevision date : 2015/05/29Version: 2.0CERCLA RQ5000 LBS1000 LBS100 LBSPage: 10/11(30606610/SDS GEN US/EN)CAS Number7664-38-2108-88-375-35-4; 107-13-1;75-28-5State regulationsState RTKPAMANJChemical namephosphoric acidToluene1,1-dichloroethylene; acrylonitrile; Propane, 2-methyl-CAS al nameTitanium dioxidecrystalline silicaLimestoneCalcium carbonateStoddard solventcrystalline silicaLimestoneCalcium carbonateTitanium dioxideStoddard solventTitanium dioxideStoddard solventLimestoneCalcium carbonatecrystalline silicaCA Prop. 65:WARNING: THIS PRODUCT CONTAINS A CHEMICAL(S) KNOWN TO THE STATE OFCALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.NFPA Hazard codes:Health : 1Fire: 2Reactivity: 0Special:16. Other InformationSDS Prepared by:BASF NA Product RegulationsSDS Prepared on: 2015/05/29We support worldwide Responsible Care initiatives. We value the health and safety of ouremployees, customers, suppliers and neighbors, and the protection of the environment. Ourcommitment to Responsible Care is integral to conducting our business and operating our facilities ina safe and environmentally responsible fashion, supporting our customers and suppliers in ensuringthe safe and environmentally sound handling of our products, and minimizing the impact of ouroperations on society and the environment during production, storage, transport, use and disposal ofour products.IMPORTANT: WHILE THE DESCRIPTIONS, DESIGNS, DATA AND INFORMATION CONTAINEDHEREIN ARE PRESENTED IN GOOD FAITH AND BELIEVED TO BE ACCURATE , IT ISPROVIDED FOR YOUR GUIDANCE ONLY. BECAUSE MANY FACTORS MAY AFFECTPROCESSING OR APPLICATION/USE, WE RECOMMEND THAT YOU MAKE TESTS TODETERMINE THE SUITABILITY OF A PRODUCT FOR YOUR PARTICULAR PURPOSE PRIOR
Safety Data SheetMasterSeal SL 2FIN SLG lst also SONOLASTIC SL2 FINISHSLG LSTRevision date : 2015/05/29Version: 2.0Page: 11/11(30606610/SDS GEN US/EN)TO USE. NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDINGWARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AREMADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SETFORTH, OR THAT THE PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USEDWITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASESHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDEREDA PART OF OUR TERMS AND CONDITIONS OF SALE. FURTHER, YOU EXPRESSLYUNDERSTAND AND AGREE THAT THE DESCRIPTIONS, DESIGNS, DATA, AND INFORMATIONFURNISHED BY OUR COMPANY HEREUNDER ARE GIVEN GRATIS AND WE ASSUME NOOBLIGATION OR LIABILITY FOR THE DESCRIPTION, DESIGNS, DATA AND INFORMATIONGIVEN OR RESULTS OBTAINED, ALL SUCH BEING GIVEN AND ACCEPTED AT YOUR RISK.END OF DATA SHEET
MasterSeal SL 2FIN SLG lst also SONOLASTIC SL2 FINISH SLG LST Revision date : 2015/05/29 Page: 1/11 Version: 2.0 (30606610/SDS_GEN_US/EN) 1. Identification Product identifier used on the label
MasterSeal HLM 5000 is a one-component, moisture-curing, bitumen-modified polyurethane elastomeric waterproofing membrane for exterior below-grade or between-slab applications. It is available in four grades: MasterSeal HLM 5000 SL (self-leveling/squeegee) MasterSeal HLM 5000 S (spray) MasterSeal HLM 5000 T (trowel) MasterSeal HLM 5000 R (roller)
MasterSeal HLM 5000 STORAGE AND SHELF LIFE Store in unopened containers in clean, dry conditions at 4 to 27 C. During storage, an easily removed skin of MasterSeal HLM 5000 may form, which does not affect performance of the product. MasterSeal HLM 5000 has a shelf life of 12 months for pails. VOC CONTENT - MasterSeal HLM 5000 SL: 183 g/L
1,8kg/m2 de MasterSeal 6100 FX en polvo). poseedor final del producto. Rendimiento saco 15kg: 8,3m2 Consumo Rendimiento 10kg Reducción consumo MasterSeal 550 4,5kg/m2 2,20m2 - MasterSeal 560 2,5kg/m2 5,00m2 45% MasterSeal 6100 FX 1,8kg/m2 5,55m2 60% Estos consumos son teóricos y dependen de la rugosidad
Refer to product data sheet on MasterSeal P 173 or MasterSeal P 176, and consult Technical Service for additional information. 2.For immersion applications, MasterSeal P 173 must be used. 3.For green concrete applications, Mast
MasterSeal HLM 5000 SL, HLM 5000 S y HLM 5000 R: cubetas de 18.95 L (5 gal) y tambores de 208 L (55 gal) disponible por pedido MasterSeal HLM 5000 T: cubetas de 18.95 L (5 gal) MasterSeal 995 (Sonoshield Reinforcing Fabric): rollos de 91 por 0.9 m (300 ft
products e.g. MasterSeal 590, MasterSeal P 385 Part D or MasterEmaco S 5440 RS Iron / steel: Should be sand blasted to a SA 2½ finish prior to application of the product. No primer coat is needed for application of MasterSeal M 790 on steel. Substrate temperature
MasterSeal systems can not be applied in situations of water coming in counter pressure. In this case it is necessary to provide drainage and then block the coming water with the fast setting MasterSeal 590 mortar. In the event that you encounter any patches still wet, apply one or two coats of MasterSeal P 385 after 48-72 hours
MasterSeal Traffic 1500 ideal for various vehicular or pedestrian traffic solutions repairable and recoatable to extend the useful life of the system MasterSeal Traffic 1500 DeSCRIPtIOn MasterSealTraffic 1500 waterproofing systems are composed of: – MasterSeal M 200, a one-component, moisture-curing polyurethane,File Size: 1MBLocation: DeSCRIPtIOnPage Count: 8
