Intelligent Setup - Linsn LED

2y ago
74 Views
2 Downloads
1.27 MB
8 Pages
Last View : 26d ago
Last Download : 2m ago
Upload by : Joanna Keil
Transcription

Intelligent SetupTECHNOLOGYThis document is mainly to show you how to do intelligent setup. The following stepsare applying to normal modules.1. Click “ Screen Configuration”—click” Receiver” in the interface of “HardwareSetup”—click” Intelligent setup” , as followsLINSN2. After clicking” Intelligent setup”, you will see the following steps:1) Intelligent setup guide 1Pay attention to those marked in red. Others don't needs to be changed in thispage.Display type: Choose this according to your screenDriver IC:Check this IC on the back of your module, and choose thecorresponding option in the software, like MBI5153 or ICN2053,etc. If you don’t find the exact IC model, you can just select“General”.Pixel X/Y:X means the actual width of one module (in pixel)Y means the actual height of one module (in pixel)Data input Qty:The quantity of the input ports on the moduleOfficial website: www.linsn.comAdd:Floor 15&16, Jiajiahao Business Building, No. 10168, Shennan Blvd,Nanshan District, ShenzhenTel: 86-0755-33985098

Check how many sets of R; G; B signal that each input porthas.Row decode mode: Check the type of the decode IC on the back of the module(74HC138 is the regular one).Module cascade direction: Check how the modules connect (viewing from thefront of the LED screen)LINSNTECHNOLOGYData group:Official website: www.linsn.comAdd:Floor 15&16, Jiajiahao Business Building, No. 10168, Shennan Blvd,Nanshan District, ShenzhenTel: 86-0755-33985098

YGOOLNH2) Intelligent setup guide 2INSNTECClick 1: to see what color the first module (normally on the upper right of the LEDscreen) displaysClick 2: to see what color the first module (normally on the upper right of the LEDscreen) displaysAfter comparing status1 & status2, choose the corresponding option in LedStudioFor example,Status2LStatus1Official website: www.linsn.comAdd:Floor 15&16, Jiajiahao Business Building, No. 10168, Shennan Blvd,Nanshan District, ShenzhenTel: 86-0755-33985098

YGOOLNHECChoose “status 1 displays white, status 2 displays black” according to the abovesituation, and click “Next”.LINSNT3) Intelligent setup guide 4Click1&2 and then compare the status of them.Choose the corresponding options according to the actual change of the firstmodule (normally on the upper right of the LED screen)Status1Status2Official website: www.linsn.comAdd:Floor 15&16, Jiajiahao Business Building, No. 10168, Shennan Blvd,Nanshan District, ShenzhenTel: 86-0755-33985098

YGOOLNHSNTEC4) Intelligent setup guide 5Click 1; 2; 3; 4 and then compare status of themChoose the corresponding options according to the actual change of the firstmodule (normally on the upper right of the led screen)Status2Status3Status4LINStatus1Official website: www.linsn.comAdd:Floor 15&16, Jiajiahao Business Building, No. 10168, Shennan Blvd,Nanshan District, ShenzhenTel: 86-0755-33985098

YGOOLNNTECH5) Intelligent setup guide 6Bright line of LED display: choose” row”Bight rows of LED display: check the actual bight rows of the upper rightmoduleLINSInternal row (including one bright row): means the quantity of the black rows betweenbright rows, and the final value for thisoption should plus one.For example, there are 2 bright lines showing on the module, and between the two linesthere are 3 black rows. Therefore, you need to choose 2 for bright rows option and4(3 1) for interval row option.If there is just one line, choose 1 for bright rows option and 1 for interval row option.Official website: www.linsn.comAdd:Floor 15&16, Jiajiahao Business Building, No. 10168, Shennan Blvd,Nanshan District, ShenzhenTel: 86-0755-33985098

YGOOLNHLINSNTEC6) Intelligent setup guide 7Locate the blinking pixel on the first module, and mark it in the software byclicking the corresponding position. Follow the track of blinking pixel until“pixel recognition finish .” pops up, click “OK” and “Complete”Official website: www.linsn.comAdd:Floor 15&16, Jiajiahao Business Building, No. 10168, Shennan Blvd,Nanshan District, ShenzhenTel: 86-0755-33985098

NTECHNOLOGY3. After finishing guide7, go back to the interface of “Receiver”Pay attention to those marked in redActual width: the actual width (in pixel) that one receiving card loadsActual height: the actual height (in pixel) that one receiving card loadsPs: If there are more than one receiving card in your screen, and they load differentpixel, input the greater value for the actual W&HScan clock: usually from 16.67 to 18.75Gray level: Normally choose 65536(Max refresh)Grey mode: Normally choose high refresh-lightLINS4. Finally, click” send to receiver”. If the screen works ok, click” save to receiver”and then “save to file”. At this moment, intelligent setup is done.Official website: www.linsn.comAdd:Floor 15&16, Jiajiahao Business Building, No. 10168, Shennan Blvd,Nanshan District, ShenzhenTel: 86-0755-33985098

1. Click “ Screen Configuration”—click” Receiver” in the interface of “Hardware Setup”—click” Intelligent setup” , as follows 2. After clicking” Intelligent setup”, you will see the following steps: 1) Intelligent setup guide 1 Pay attention to thos

Related Documents:

Aug 21, 2019 · philips lytecaster 344dstx-302mrex-42017-4 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 . recessed white 4" recessed downlight led, 1160 delivered lumens, 3000k, 90 cri cree lighting eaton mcgraw-edison ist-af-350-

A. Drive Bays M. Memory Fault LED B. UID Button N. UID Button C. Optical Disk Drive O. Module Power LED D. System Power LED P. SAFE TO PULL LED E. System Status LED Q. PRIMARY LED F. System FT LED R. IO Module Fault LED G. UID LED S. Fan Fault LED H. USB Connector T. PSU Fault LED I. Pull-out Tab U. DC Power Fault LED J. Power Button V .

tv led philips led 32"fhd 4hdmi 3usb hevc dvbs2 smart philips 32pfs6402/12 tv led samsung led 49"uhd 1800pqi 3hdmi 2usb hevc dvbs smart ue49nu7500uxzt tv led lg led 60"4k 3hdmi 2usb hevc dvbt2 stamrt lg 60uk6200pla.aeu tv led tcl 32" hd led es5 t2 hevc sat android tv 8.0 wifi 32es560 tv led tcl 40" fhd

BACK to return SUBWOOFER SETUP SW limiter.: dB Increase limiter level using VOL buttons. Press ENTER just before the subwoofer is clipping. press BACK to cancel. MAIN MENU Digital audio.: menu Input setup.: menu System setup.: menu Speaker Setup.: menu Delay Setup.: menu Balance Setup.: menu Subwoofer Setup: menu ENTER to enter menu

Lytecaster Downlighting. 16 Corepro Downlight LED Arioso Recessed16 5” Lytening LED 16 5” LED Lamp-in-the-Box 16 5” Xceed LED Round 16 Attune Recessed 5” Xceed LED Square 17 5” Uniframe LED 17 6 3/4” Uniframe LED DayLine LED Recessed17 Retrofit

Troubleshooting: Pg. 13-36 . 1. Inadequate Water Flow LED 2. Problem Detected with MIN LED or LED #2 3. Problem Detected with LED # 3 or LED #4 4. Problem Detected with LED # 5,6,7, or 9 5. Problem Detected with LED # 8 or MAX LED 14-16 . 17-23 . 24-27 ; 28-31 : 32-36 ; Additional Inf

www.unipartdorman.co.uk Contents Page 3 Introduction to Unipart Dorman Trackside Signals 4 Integrated Lightweight Signal 6 LED Colour Light Signal 16 LED Colour Light Signal Spares 18 LED Miniature Tunnel Signal 20 LED Banner Repeating Signal 22 LED Universal Semaphore Lamp 23 LED Semaphore Lamp and Bracket 24 LED Semaphore Battery Box

PK-2 Next Generation ELA Standards at a Glance . PK-2 Reading Standards (Literary and Informational Text) Review the . PK, K, 1. st, and 2 nd grade ELA introductions for information regarding: guidance and support, range of student reading experiences, text complexity, English language learners/multilingual learners, and students with disabilities. Key Ideas and Details PK K 1 2 PKR1 .