Fused And Non-Fused Disconnect Switches Technical Data
Technical DataFused and Non-Fused Disconnect SwitchesBulletin 194RTopicSummary of ChangesOverviewCatalog Number ExplanationProduct SelectionAccessoriesSpecificationsApproximate DimensionsDisconnect Switch KitsFuse DescriptionPage12451119305055Summary of ChangesThis publication contains new and updated information as indicated in the following table.TopicPagesUpdated product descriptions13Updated quantity that is required and package quantity for terminal shields16Updated enclosure dimensions48-49
Fused and Non-Fused Disconnect SwitchesOverviewProduct TypeCurrent RangeMain ApplicationsFunctionality Mounting Styles Handles Open Switch or Enclosed UL/CSA Electrical Ratings:Rated Voltage UeRated Current IeRated Power Pe [FLA]Short-Circuit RatingsMechanical Life [ops]IEC Rated Current IeAmbient Operational TemperatureAmbient Enclosed TemperatureAmbient Storage TemperatureProtection class per IEC 529Optional Accessories2 Bulletin 194R-C, J, H, B, D, F, L, N, NUFused and non-fused rotary disconnect switches20 1200 AUL 98 ratings “suitable as service entrance disconnecting means”UL 508, CSA ratings “suitable as at-motor disconnect”UL and IEC applications3- or 4-pole fusible or non-fusible disconnect for standard OFF-ON oremergency stop in a main panel disconnect application4th pole available as modular accessoryTest mode switch position20 63 A: DIN Rail/Panel mounting; 100 1250 A: Panel mountingAvailable in rotary styles, UL Type 1/3R/4/4X/12, IP66, standard, or testmode versionsHandle colors in black and red/yellow and padlockable versions30 A/60 A legend markers (optional) — uses Cat. No. 1492-MS6X12markersOpen switchEnclosed: UL/CSA rated enclosure for 20 63 A devices 3- or 4-pole non-fusible disconnect for standard OFF-ONor emergency stop in a main panel disconnectapplication 4th pole available as modular accessoryPanel mounting690V AC20 1200 AVaries w/ 1- or 3-phase switch, voltage200 kAUp to 10 000690V AC125 1250 AVaries w/ 1- or 3-phase switch, voltage200 kAUp to 10 000-20 60 C (-4 140 F)-20 60 C (-4 140 F)-40 65 C (-40 149 F)Disconnects with terminal shroud or terminal screen: IP20194R-J100-1753, front mounting: IP20Fuse carriers: IP30IP66 handlesMulti-length shaftsAuxiliary contactsTerminal coversNFPA 79 internal handle with shaftBulletin 194R-NENon-fused IEC rotary disconnect switches125 1250 A Disconnecting means IEC applications Available in rotary styles, UL Type 1/3R/4/4X/12, IP66, orstandard versions Handle colors in black and red/yellow and padlockableversions Open switch-20 60 C (-4 140 F)-20 60 C (-4 140 F)-40 65 C (-40 149 F) Front-mounted disconnects with terminal shroud orterminal screen: IP20 IP66 handlesMulti-length shaftsAuxiliary contactsTerminal coversRockwell Automation Publication 194R-TD001C-EN-P - June 2019
Fused and Non-Fused Disconnect SwitchesStandards Compliance and Certifications—Bulletin 194R-C, J, H, B, D, F, L, N, NUStandards ComplianceUL 98UL 508CSA C22.2, No. 14IEC/EN 60947-3 Low Voltage Switchgear and Controlgear part 3BS EN60947-3VDE 0660NEMA KS-1CertificationsCE MarkedCSA Certified (File No. LR1234)UL Listed (File No. E 14841, Guide NLRV; File No. E 47426, Guide WHTY)Standards Compliance and Certifications—Bulletin 194R-NEStandards ComplianceIEC/EN 60947-3 Low Voltage Switchgear and Controlgear part 3CertificationsCE MarkedProduct OverviewThe Bulletin 194R line of fused and non-fused rotary disconnect switches provides the flexibility to meet worldwide applications. The disconnectswitches are UL Listed and CSA Certified and are designed to meet IEC 60947-3, VDE, DIN, BS, and applicable NEMA requirements.Features 20 A 1250 A Sizes Fused switch versions:– BS88 -DIN– CSA HRCII-C - CSA HRCI-MISC - HRC-L– UL Class J- UL Class CC - UL Class L– NFC IP66 (Type 3R, 3, 12, 4, 4X) operating handle ingress ratings Handle with or without test mode Padlockable handle for up to three padlocks 6 auxiliary contacts can be added Suitable as service entrance disconnecting means (UL 98) Suitable as at-motor disconnecting means (UL 508)Rockwell Automation Publication 194R-TD001C-EN-P - June 20193
Fused and Non-Fused Disconnect SwitchesCatalog Number ExplanationFourth pole (20 63 A), additional auxiliary contacts, and handle options available in accessory section.194RCat. No. 194R-J30-1753CodeCCode20JUL Class J, CSA Type HRCI-J25HBDFLCSA Type HRCII-CBS88(3)DIN(3)NFC(3)UL Class L, CSA Type HRC-LNon-fused (20 63 A)(1)Non-fused, IEC (100 1250 A)(1)(2)Non-fused, UL (100 1200 A)(1)NJa30b–1753cSdCat. No. 194R-NE160-1753aFuse TypeDescriptionUL Class CC, CSA Type HRCI-MISCNENU–bLoad Size(3)Description20 A (BS88)25 A (NFC)cNo. of PolesCodeDescription17533-pole switch4-pole switch1754 (non-fused:100 1250A)30 A (CC, J, HRCI-J)30 A (non-fused)30 A (HRCII-C)32 A (BS88, NFC)3232 A (DIN)60 A (J, HRCI-J, HRCII-C)6060 A (non-fused)6363 A (BS88, DIN, NFC)100 100 A (BS88, DIN, NFC, J, HRCI-J)125 125 A (BS88, DIN, NFC, Non-fused)160 160 A (BS88, DIN, NFC, Non-fused)DIN, NFC, J, HRCI-J,200 200 A (BS88,non-fused)DIN, NFC, J, HRCI-J,250 250 A (BS88,non-fused)DIN, NFC, J, HRCI-J,400 400 A (BS88,non-fused)600 A (BS88, DIN, NFC, J, HRCI-J,600non-fused)630 630 A (BS88, DIN, NFC, non-fused)DIN, NFC, L, HRCI-L,800 800 A (BS88,non- fused)12001200 A (Non-fused)12501250 A (BS88, DIN, non-fused)30(1) Non-fused disconnect switches must use separately installed fuses for upstream short-circuit protection(2) Does not carry UL Certification.(3) Fuse classes BS88, DIN, and NFC are not suitable for use in North American applications4Rockwell Automation Publication 194R-TD001C-EN-P - June 2019CodeblankdFuse IndicationDescriptionNo fuse status indicationSFuse status indication (20 63 A)
Fused and Non-Fused Disconnect SwitchesProduct SelectionThis section provides information that you need to select a disconnect switch.UL/CSA Fused Disconnect SwitchesCat. No. 194R-J30-1753Cat. No. 194R-J100-1753Note: Your order must include 1) Cat. No. of disconnect switch, 2) shaft, 3) handle, and 4) any accessories.RatedCurrent [A]1-Phase (60 37-1/2———310152550—800——Maximum Hp Ratings(1) *3-Phase (60 Hz)DC240V480V600V125V250VUL Class CC and CSA HRCI-MISC Fuses7.5152035UL Class J and CSA HRCI-J Fuses7.5152035153050510CSA HRCII-C Fuses7.5152035153050510UL Class J and CSA HRCI-J 503502050200500500——UL Class L and CSA HRCI-L Fuses200500500——FuseDim. Ref.Cat. No.30 A CC, HRCI-MiscA1194R-C30-175330 A Class J, HRCI-J60 A Class J, HRCI-JA1B1194R-J30-1753194R-J60-175330 A HRCII-C60 A HRCII-CB1B1194R-H30-1753194R-H60-175330 A Class J, HRCI-J60 A Class J, HRCI-J100 A Class J, HRCI-J200 A Class J, HRCI-J400 A Class J, HRCI-J600 A Class J, 753800 A Class L, HRCI-LF9194R-L800-1753(1) Time delay fuses may be required to utilize the disconnect switch at its maximum horsepower rating.(2) Integral terminal lug #12 #10 Solid Cu or #12 - #1 Stranded Cu.Rockwell Automation Publication 194R-TD001C-EN-P - June 20195
Fused and Non-Fused Disconnect SwitchesUL/CSA Non-fused Disconnect SwitchesCat. No. 194R-N30-1753Cat. No. 194R-J100-1753Note: Your order must include 1) Cat. No. of disconnect switch, 2) shaft, 3) handle, and 4) any accessories.Fuse DescriptionRatedNo. ofCurrentPoles[A](1)3060100200Non-fused disconnect switchesmust use separately installedfuses for upstream short se (60 ��————————————Maximum Hp Ratings3-Phase (60 500200500500200500500200500500(1) 30 A UL-rated device has Ithe of 40 A per IEC. 60 A UL-rated device has Ithe of 80 A per IEC.6Rockwell Automation Publication 194R-TD001C-EN-P - June 5151550505050————Dim. Ref.Cat. 00-1754194R-NU1200-1753194R-NU1200-1754
Fused and Non-Fused Disconnect SwitchesIEC Fused Disconnect SwitchesCat. No. 194R-F32-1753Cat. No. 194R-F63-1753Cat. No. 194R-D160-1753Note: Your order must include 1) Cat. No. of disconnect switch, 2) shaft, 3) handle, and 4) any accessories.BS88 Fused Disconnect SwitchesFuse classes BS88, DIN, and NFC are not suitable for use in North American applicationsLoad Rating Ie[A]2032631001602002504006308001250Ratings (AC23) With Fuse Links3-Phase Max. kW (50 5295—450400—560400FuseDim. Ref.Cat. No.BS88 A1BS88 A1BS88 A3BS88, size A4BS88, size A4BS88, size B1-B2BS88, size B1-B3BS88, size B1- B4BS88, size C1- C2BS88, size C1-C3BS88, size -1753194R-B800-1753194R-B1250-1753FuseDim. Ref.Cat. No.NH 000NH 000DIN, size 00DIN, size 00DIN, size T1DIN, size T2DIN, size T3DIN, size T3DIN, size 53DIN Fused Disconnect SwitchesFuse classes BS88, DIN, and NFC are not suitable for use in North American applicationsLoad Rating Ie[A]32631251602504006308001250Ratings (AC23) With Fuse Links3-Phase Max. kW (50 560400Rockwell Automation Publication 194R-TD001C-EN-P - June 20197
Fused and Non-Fused Disconnect SwitchesNFC Fused Disconnect SwitchesFuse classes BS88, DIN, and NFC are not suitable for use in North American applications.Ratings (AC23) With Fuse Links3-Phase Max. kW (50 055Load Rating Ie[A]253263FuseDim. Ref.Cat. No.NFC 14x51 mmNFC 14x51 mmNFC 22x58 mmA1A1B1194R-F25-1753194R-F32-1753194R-F63-1753IEC Non-fused Disconnect SwitchesCat. No. 194R-N30-1753Cat. No. 194R-NE160-1753Note: Your order must include 1) Cat. No. of disconnect switch, 2) shaft, 3) handle, and 4) any accessories.Fuse DescriptionRatedCurrent[A](1)3060125160Non-fused disconnectswitches must use separatelyinstalled fuses for upstreamshort circuit protection.2504006308001250No. ofPoles3334343434343434Maximum Hp Ratings1-Phase (60 aximum kW Ratings3-Phase (60 ��280150—450185—450185—710415—710415(1) 30 A UL-rated device has Ithe of 40 A per IEC. 60 A UL-rated device has Ithe of 80 A per IEC.(2) Does not carry UL Certification.8Rockwell Automation Publication 194R-TD001C-EN-P - June 2019Dim. Ref.Cat. -NE1250-1754(2)
Fused and Non-Fused Disconnect SwitchesComplete UL/CSA Disconnect Switch KitsIncludes disconnect switch, operating handle with defeater mechanism and operating shaft, NFPA handle, auxiliary contacts, and padlockattachment.Catalog Number ExplanationFourth pole (20 63 A), additional auxiliary contacts, and handle options available in accessory section.194ROperating handleSwitch bodyCodeCJHBDFNaFuse TypeDescriptionUL Class CC, CSA Type HRCI-MISCUL Class J, CSA Type HRCI-JCSA Type HRCII-CBS88(2)DIN(2)NFC(2)Non-fused (20 63 A)(1)–Ja30b–1753cSd–TYeN1fNFPA handle and shaftCode202530326063bLoad Size(2)Description20 A (BS88)25 A (NFC)30 A (CC, J, HRCI-J)30 A (Non-Fused)(1)30 A (HRCII-C)32 A (BS88, NFC)32 A (DIN)60 A (J, HRCI-J, HRCII-C)60 A (Non-Fused)(1)63 A (BS88, DIN, NFC)Dimensional Ref.(3)A1A1A1A2B1A1B1B1B2B1Code1753cNo. of PolesDescription3-pole switch(1) Non-fused disconnect switches must use separately installed fuses for upstream short-circuit protection(2) Fuse classes BS88, DIN, and NFC are not suitable for use in North American applications(3) See page 33 for dimensional reference data.CodeblankS(1)dFuse IndicationDescriptionNo fuse status indicationFuse status indicationeExternal HandleCodeDescriptionPY Std/pistol red/yellow handle, 4/4X, IP66 (Cat. No. 194R-PY)PBStd/pistol black handle, 4/4X, IP66 (Cat. No. 194R-PB)TY Test mode red/yellow handle, 4/4X, IP66 (Cat. No. 194R-PYT)TBTest mode black handle, 4/4X, IP66 (Cat. No. 194R-PBT)fShaft and NFPA 79 HandleCodeDescriptionS1Cat. No. 194R-S1 shaft (12 in.)S2Cat. No. 194R-S2 shaft (21 in.)N1 NFPA79 handle with 12 in. shaft and guard tubeN2 NFPA79 handle with 21 in. shaft and guard tube(1) Class C and J fuses onlyRockwell Automation Publication 194R-TD001C-EN-P - June 20199
Fused and Non-Fused Disconnect SwitchesUL Enclosed Disconnect Switches (Fused and Non-Fused)Catalog Number Explanation194R-KNon-Metallic Enclosure UL Type 3/4/4X, IP66194RCodeKFCaEnclosure TypeDescriptionThermoplastic, Type 4/4XPainted metal, Type 3/4/12Stainless steel, Type 4/4X194R-FPainted Steel Enclosure UL Type 3/4/12, IP66–CaCodeCJHBDFNJb30c–1753dbFuse TypeDescriptionUL Class CC, CSA Type HRCI-MISCUL Class J, CSA Type HRCI-JCSA Type HRCII-CBS88(2)DIN(2)NFC(2)Non-fused (20 63 A)(1)SeCode202530326063194R-CStainless Steel Enclosure UL Type 4/4X, IP66–TBf–cLoad Size(2)Description20 A (BS88)25 A (NFC)30 A (CC, J, HRCI-J)30 A (Non-Fused)(1)30 A (HRCII-C)32 A (BS88, NFC)32 A (DIN)60 A (J, HRCI-J, HRCII-C)60 A (Non-Fused)(1)63 A (BS88, DIN, NFC)PgDimensional Ref.(3)A1A1A1A2B1A1B1B1B2B1(1) Non-fused disconnect switches must use separately installed fuses for upstream short-circuit protection(2) Fuse classes BS88, DIN, and NFC are not suitable for use in North American applications(3) See page 33 for dimensional reference data.dNo. of PolesCodeDescriptioneFuse IndicationCodeDescription1753blank No fuse status indication3-pole switchS(1)Fuse status indicationCodePYPBTYTBfExternal HandleDescriptionStd/pistol red/yellow handle, 4/4X, IP66(Cat. No. 194R-PY)Std/pistol black handle, 4/4X, IP66(Cat. No. 194R-PB)Test mode red/yellow handle, 4/4X, IP66(Cat. No. 194R-PYT)Test mode black handle, 4/4X, IP66(Cat. No. 194R-PBT)(1) Class C and J fuses only10Rockwell Automation Publication 194R-TD001C-EN-P - June 2019gOther AccessoriesCodeDescriptionblankNo accessoryPPadlock attachment
Fused and Non-Fused Disconnect SwitchesAccessories4th Poles for UL ApplicationsRatedCurrent [A]1-Phase (60 Hz)120V240VMaximum Hp Ratings(2)3-Phase (60 60233107.51515303060233107.5151530FuseDim. Ref.Cat. No.(3)——A2B2194R-30-NN194R-60-NN30 A CC, HRCI-MiscA1194R-30-NC30 A J, HRCI-J60 A J, HRCI-JA1B1194R-30-NJ194R-60-NJ30 A HRCII-C60 A 203540510UL Class CC and CSA HRCI-MISC Fuses2035UL Class J and CSA HRCI-J Fuses203550510CSA HRCII-C Fuses20——50——(1) 60 A UL, 80 A IEC(2) Time delay fuses may be required to utilize the disconnect switch at its maximum horsepower rating.(3) 30 A UL, 40 A IEC4th Poles for BS88 FusesLoad Rating Ie[A]203263Ratings (AC23) With Fuse Links3-Phase Max. kW (50 055FuseDim. Ref.Cat. No.(1)BS88 A1BS88 A1BS88 A3A1A1B1194R-20-NB194R-32-NB194R-63-NBFuseDim. Ref.Cat. No.(1)NH 000NH 000B1B1194R-32-ND194R-63-NDFuseDim. Ref.Cat. No.(1)NFC 14 x 51 mmNFC 14 x 51 mmNFC 22 x 58 mmA1A1B1194R-25-NF194R-32-NF194R-63-NF(1) For fuse status indication, add S to catalog number, example: 194R-30-NB becomes 194R-30-NBS.4th Poles for DIN FusesLoad Rating Ie[A]3263Ratings (AC23) With Fuse Links3-Phase Max. kW (50 Hz)200/230V380/400/415V660/690V918.53018.53055(1) For fuse status indication, add S to catalog number, example: 194R-30-ND becomes 194R-30-NDS.4th Poles for NFC FusesLoad Rating Ie[A]253263Ratings (AC23) With Fuse Links3-Phase Max. kW (50 055(1) For fuse status indication, add S to catalog number, example: 194R-30-NN becomes 194R-30-NNS.Rockwell Automation Publication 194R-TD001C-EN-P - June 201911
Fused and Non-Fused Disconnect SwitchesReplacement Fuse HardwareDescriptionM4 x 0.7 Fuse screwsM5 x 0.6 Fuse screwsFor Use With194R BS88 Fuse Types194R BS88 Fuse TypesPkg. Qty.22Cat. No.194R-BS88-M4194R-BS88-M5Replacement Conductor Mounting HardwareDescription(8) HM8 16 mm bolts(8) HM8 nuts(8) M8 washers(8) HM10 20 mm bolts(8) HM10 nuts(8) M10 washers(8) HM10 25 mm bolts(8) HM10 nuts(8) M10 washers(8) HM12 30 mm bolts(8) HM12 nuts(8) M12 washers(8) HM10 25 mm bolts(8) HM10 nuts(16) M10 washers(8) HM12 30 mm bolts(8) HM12 nuts(16) M12 washers(8) HM8 16 mm bolts(8) M8 washers(8) HM10 16 mm bolts(8) M10 washers(8) HM8 16 mm bolts(8) M8 washers(6) HM10 35 mm bolts(6) M10 nuts(12) M10 washers(6) HM12 35 mm bolts(6) M12 nuts(12) M12 washers(12) M10 25 mm bolts(12) M12 washers(6) HM10 nuts(6) HM12 nuts(12) HM12 30 mm bolts(12) HM12 35 mm bolts(12) M12 nuts(36) M12 washers(8) HM12 30 mm bolts(8) HM12 nutsFor Use WithCat. No.3- and 4-pole 125 160 A IEC non-fused switches194R-HF-160-4(1)3- and 4-pole 250 A IEC non-fused switches194R-HF-250-4(1)3- and 4-pole 400 A IEC non-fused switches194R-HF-400-4(1)3- and 4-pole 630 A IEC non-fused switches194R-HF-630-4(1)3- and 4-pole 100 and 200 A UL non-fused switches194R-HF-200-4U3- and 4-pole 400 A UL non-fused switches194R-HF-400-4U3-pole 100 160 A BS88 fused switches 3-pole 125 160 A DIN fused switches194R-HF-160-3BD(2)3-pole 200 250 A BS88 fused switches 3-pole 250 A DIN fused switches3-pole 200 A UL fused switches194R-HF-250-3BDU(2)3-pole 400 A BS88 fused switches 3-pole 400 A UL fused switches194R-HF-400-3BU(2)3-pole 630 800 A BS88 fused switches194R-HF-800-3B(2)3-pole 400 A DIN fused switches3-pole 630 1250 A DIN fused switches194R-HF-400-3D(2)194R-HF-800-3D(2)3-pole 1250 A BS88 fused switches194R-HF-1250-3B(2)3-pole 600 800 A UL fused switches194R-HF-800-3U(1) Does not carry UL Certification.(2) Fuse classes BS88, DIN, and NFC are not suitable for use in North American applications12Rockwell Automation Publication 194R-TD001C-EN-P - June 2019
Fused and Non-Fused Disconnect SwitchesReplacement Fuse CarriersDescription30 A CC Fuse Carrier30 A J Fuse Carrier60 A J Fuse Carrier20 A BS88 Fuse Carrier32 A BS88 Fuse Carrier63 A BS88 Fuse Carrier30 A CSA HRCII-C Fuse Carrier60 A CSA HRCII-C Fuse Carrier32 A DIN Fuse Carrier63 A DIN Fuse Carrier25 A NFC Fuse Carrier32 A NFC Fuse Carrier63 A NFC Fuse Carrier30 A Non-Fuse Carrier60 A Non-Fuse Carrier194R-J30-FC194R-J30-FCSCat. 94R-N30-FC194R-N60-FCPkg. Qty.111111111111111(1) For fuse status indication, add S to catalog number, example: 194R-J30-FC becomes 194R-J30-FCS.Cable Operators and Operating HandlesDescriptionFor Use WithCable Length3 ft.4 ft.6 ft.Cat. No.(2)194R-FC03194R-FC04194R-FC0610 ft.194R-FC103 ft.5 ft.194R-LFC03194R-LFC0510 ft.194R-LFC1020 63 A switchesCable operators(1)194R-J100-1753 and194R-J200-1753 fuseddisconnect switches(1) 1494U-H operating handle also required.(2) For additional information, see page 53Handle Ingress ProtectionRatingType 1, 3R, 4, 4X, 12Type 1, 3R, 4, 12Nonmetallic handle, 5-1/2 in. basePainted metal handle, 5-1/2 in. baseType 4, 4XStainless steel handle, 5-1/2 in. baseDescriptionMountingDisconnect SwitchSize [A]Cat. No.(1)1494U-HP11494U-HM1Right or left flange30, 60, 100, 2001494U-HS1(1) For additional information, see page 53Rockwell Automation Publication 194R-TD001C-EN-P - June 201913
Fused and Non-Fused Disconnect SwitchesSide-mounted Disconnect Switch Kit (for 20 63 A switches)DescriptionFor Use WithCat. No.(1)Side-mounted kit(disconnect mechanism and bracket)All Bul. 194R 30/60 A disconnect switches and Bul.194R-P handles194R-SDK2(1) For additional information, see page 56Disconnect Switch Padlock Accessory (for 20 63 A switches)DescriptionDisconnect Switch Dim Ref.Pkg. QtyCat. No.For padlock with 3 6 mm diameterA1, A2, B1, B21194R-PLA1Replacement Mounting Hardware (for 20 63 A switches)DescriptionDisconnect Switch DimRef.Pkg. QtyCat. No.(1) M4 x 0.7 set screw, (1) shaft clip and(2) M4 x 0.7 mounting screwsA1, A22194R-30-HDWR(1) M4 x 0.7 set screw, (1) shaft clip, and(4) M4 x 0.7 mounting screwsB1, B24194R-60-HDWRAuxiliary Contact BlocksDescriptionContact MaterialFor Use WithN.O.N.C.N.O.E.M.194R 30/60 A switches(all) 194R 100 1250 AN.C.L.B.Contact Block Note: Sold only in multiplesswitches (fused only).of 10. Order (quantity of) 10 to receive one N.O. with stab terminals Alsoused for test modepackage of 10 pieces. Latch not included.N.C. with stab terminals function for 20 63 Aswitches.N.O. spring-clampPkg. Qty10800F-Q01N.C. spring-clampAuxiliary contact (Form C)194R 100 1250 Aswitches (non-fused only)(1) Does not carry UL Certification.14Cat. -X01T800F-Q10Rockwell Automation Publication 194R-TD001C-EN-P - June 20191194R-1STNONC(1)2194R- 2NDNONC(1)
Fused and Non-Fused Disconnect SwitchesOperating Handles (Accepts 3 Padlocks)DescriptionFor Use WithPadlockable handle,standard Bul. 194R disconnect switches up to 60 APadlockable handle, testmode Bul. 194R disconnect switches up to 60 AOperating HandleStandard orientation withdefeaterOperating HandleStandard orientation withoutdefeaterColorBlackRed/YellowBlackDegree of ProtectionType 3R, 3, 12, 4, 4XType 3R, 3, 12, 4, 4XType 3R, 3, 12, 4, 4XCat. No.194R-PB194R-PY194R-PBTRed/YellowType 3R, 3, 12, 4, 4X194R-PYTBlackIP66(Type 1, 3R, 12, 4, 4X)194R-HM4Red/YellowIP66(Type 1, 3R, 12, 4, 4X)194R-HM4E IEC Non-fused disconnect switches: 125 630 A IEC Fused disconnect switches: 100 400 A UL Disconnect switches: 100 400 A IEC Non-fused disconnect switches: 800 1250 AIEC Fused disconnect switches: 630 1250 AUL Non-fused disconnect switches: 600 1200 AUL Fused disconnect switches: 600 800 ABlack with lightgray cover IEC Non-fused disconnect switches: 800 1250 AIEC Fused disconnect switches: 630 1250 AUL Non-fused disconnect switches: 600 1200 AUL Fused disconnect switches: 600 800 ABlack with lightgray coverRed/YellowRed/YellowIP65(Type 1, 3R, 12, 4, 4X) 194R-HM4-LIP65(Type 1, 3R, 12, 4, 4X) 194R-HM4E-LIP65(Type 1, 3R, 12, 4, 4X) 194R-HM4-N2-LIP65194R-HM4E-N2-L(Type 1, 3R, 12, 4, 4X)OSHA Lockout/Tag Out Compliance (LOTO)OSHA CFR36 Section 1910 mandates that disconnect switches be able to be locked out while in the OFF position during servicing. All Bulletin194R handles comply with this important safety requirement. See NFPA Article 430 for disconnect requirements of motor applications.Rockwell Automation Publication 194R-TD001C-EN-P - June 201915
Fused and Non-Fused Disconnect SwitchesOperating ShaftsDescriptionFor Use WithExtension shaft, Standard length140U-P*, 194R-P*, and 194R- P*T handlesExtension shaft, Standard lengthBul. 194R-HM handles for IEC Non-fused disconnect switches: 125.630 A IEC Fused disconnect switches: 100.400 A UL Disconnect switches: 100.400 ABul. 194R-HM handles for IEC Non-fused disconnect switches: 800.1250 A UL Non-fused disconnect switches: 600.1200ABul. 194R-HM handles for IEC Fused disconnect switches: 630.1250 A UL Fused disconnect switches: 600.800 AExtension Shaft, Extended lengthExtension shaft, Standard lengthExtension Shaft, Extended lengthExtension shaft, Standard lengthExtension Shaft, Extended lengthOperating Shaft Length12 in. (30.48 cm)21 in. (53.34 cm)12.6 in. (320 mm)Cat. No.194R-S1194R-S2194R-R722.8 in. (580 mm)194R-R812.6 in. (320 mm)194R-R922.0 in. (560 mm)194R-R1012.6 in. (320 mm)194R-R1122.0 in. (560 mm)194R-R12NFPA 79 Internal Operating Handle with ShaftDescriptionFor Use WithOperating Shaft Length12 in. (30.48 cm)Cat. No.194R-N121 in. (53.34 cm)194R-N212.6 in. (320 mm)194R-HM4-NFPA122 in. (560 mm)194R-HM4-NFPA312.6 in. (320 mm)194R-HM4-NFPA222 in. (560 mm)194R-HM4-NFPA4140U-P*, 194R-P*, and 194R-P*T handlesNFPA 79 internal operating handle with 100 400 A UL fused disconnect switchesshaft Permits operation of the disconnectswitch when the panel door is open,in compliance with NFPA 79600 800 A UL fused disconnect switchesTerminal ShieldsFor Use WithNo. ofPolesMountingPositionDisconnectSwitch Dim. Ref.30 A IP20 TerminalShroud (three terminals)60 A IP20 TerminalShroud (three terminals)30 A IP20 TerminalShroud (one terminal)———A1, A222194R-30-C3———B1, B222194R-60-C3———A1, A222194R-30-C160 A IP20 TerminalShroud (one terminal)———B1, B222194R-60-C1IEC Non-fused switches,125 160 4R-LNC14194R-LNC15194R-LNC16Terminal ShroudIEC Non-fused switches,250 AIEC Non-fused switches,400 630 AIEC Non-fused switches,800 AIEC Terminal ShieldIEC Non-fused switches,1250 A16Qty Required perPkg.DisconnectQtySwitchDescriptionF1Line or loadsideF2F3F4Line or loadsideF5Rockwell Automation Publication 194R-TD001C-EN-P - June 2019Cat. No.
Fused and Non-Fused Disconnect SwitchesDescriptionFor Use WithUL Non-fused switches,100 200 ANo. ofPolesMountingPosition33Line sideLoad sideLine or loadsideLine sideLoad sideLine or loadsideUL Terminal ShieldUL Non-fused switches,800 1200 AIEC (BS/DIN) TerminalShroudsIEC Fused switches, B100,B160, D125, D160IEC Fused switches, B200,B250, B400, D250, D400IEC Fused switches, B630,B800, D630, D800IEC Fused switches,B1250,D1250UL Fused switches, 200 ACat. 4R-LNC25194R-LNC26F13, F1423194R-LNC27F15, 3194R-LNC31334UL Non-fused switches,600 AF1Qty Required perPkg.DisconnectQtySwitch111124UL Non-fused switches,400 ADisconnectSwitch Dim. Ref.3434Line or loadsideF3Line or loadsideF4333F2Line or loadsideUL/IEC (BS/DIN) TerminalShroudsIEC Fused switches(see Dim.Ref.)UL Fused switches, 400 A3Line or loadsideF7, F1623194R-LNC32UL Terminal ShroudUL Fused switches, 600 A,800 A3Line or loadsideF823194R-LNC29Rockwell Automation Publication 194R-TD001C-EN-P - June 201917
Fused and Non-Fused Disconnect SwitchesLug Kits — order separatelyDescriptionDimension ReferenceFor Use WithPkg.QtyCat. No.A1 (194R-C30, -J30), A2(194R-N30)—1194R-30-MTL3B1 (194R-J60, -H30, - H60),B2 (194R-N60)—1194R-60-MTL3(1) 300 MCM—UL Non-fused switches: 100 200 AUL Fused switches: 200 A3194R-TL1(1) 300 MCM—UL Non-fused switches: 100 200 A4194R-TL2(1) 600 MCM—UL Fused and non- fused switches:400 A3194R-TL3(1) 600 MCM—UL Non-fused switches: 400 A4194R-TL4(2) 350 MCM—3194R-TL5(2) 350 MCM—4194R-TL6(2) 600 MCM—3194R-TL7(2) 600 MCM(2) 600 MCM——UL Fused and non- fused switches:400 A4-pole UL Non-fused switches: 400 AUL Non-fused switches: 600 AUL Fused switches: 600 800 AUL Non-fused switches: 600 AUL Non-fused switches: 800 1200 A46194R-TL8194R-TL9(2) 600 MCM—UL Non-fused switches: 800 1200 A8194R-TL10Wire Size(3) 14 4 AWGMulti-Tap Terminal Lugs (3) 0.75 25 mm2Load side only(3) 14 4 AWG(3) 0.75 25 mm2Terminal Lug KitOther AccessoriesDescriptionCone guide for shafts longer than 320 mm (12.6in.)Shaft Guard Provides extra protection againstcontact with shaft18For Use WithDimension ReferenceCat. No.Cat. No. 194R-HM4-L, -HM4E-L, -HM4-N2-L,and -HME-N2-L handles—194R-HSG2Cat. No. 194R-S1 and -S2 shaftsA1, A2, B1, B2194R-R1GRockwell Automation Publication 194R-TD001C-EN-P - June 2019
Fused and Non-Fused Disconnect SwitchesSpecificationsFused Disconnect Switches for UL Class Fuses and CSA HRCI-JTable 1 - Electrical Ratings, 30 A and 60 A DevicesCat. No.CSA Fuse Type/UL Fuse TypeMaximum Fuse Cartridge SizeMaximum Voltage, ACMaximum Voltage, DCAmpere RatingMaximum Short-circuit Prospective Fault Current[A][V][V][A][kA]Fuse Operating CharacteristicsMaximum Hp, 3-Phase AC200V, 60 Hz240V, 60 Hz480V, 60 Hz600V, 60 HzMaximum Hp, 1-Phase AC120V, 60 Hz240V, 60 HzMaximum Hp, DC125V DC250V DC194R-C30-1753Class CC/HRCI-MISC (1)3060025030200194R-J30-1753Class J/HRCI-J3060025030200Non-TimeTime DelayDelayTime DelayNon-Time ]0.7520.51.5[Hp][Hp]2335194R-J60-1753Class J/HRCI-J6060025060200Time DelayNon-Time 0510(1) Based on Rockwell Automation tests in accordance with the requirements as defined in CSA C22.2 No. 4, IEC 60947-3, and UL 98.Table 2 - Electrical Ratings, 100 800 A DevicesCat. No.Rated CurrentStandards ComplianceRatings per UL/CSAMaximum Voltage, ACMaximum Voltage, DCMaximum Short-circuit Fault CurrentFuse TypeULCSAMax. Fuse RatingMax. Hp Rating, 3-phase240V480V600VMax. Hp Rating, DC125V, 2 poles in series240V, 3 poles in series[A]194R-J100100194R-J200200194R-J400400UL 98, CSA22.2, No. ell Automation Publication 194R-TD001C-EN-P - June 201919
Fused and Non-Fused Disconnect SwitchesTable 3 - Mechanical Data, 30 A and 60 A DevicesCat. No.Degree of Protection (per IEC 60947-3), Switch OnlyDegree of Protection (per IEC 60947-3), Switch with Terminal Shield andFuse CarriersMechanical Endurance(1)[Operations][N m]Operating Torque (Maximum)[Lb in][mm2]Terminal Capacity, Power Terminals[AWG][mm2]Terminal Capacity, Auxiliary Contact Terminals[AWG]Maximum Number of Auxiliary Circuits[kg]Approximate Weight[lbs]Height [mm (in.)]Minimum Enclosure SizeWidth [mm (in.)]Depth [mm (in.)]Switch Dimension Reference (See dimension drawings.)194R-J30-1753IP20194R-J60-
UL 508, CSA ratings . IEC/EN 60947-3 Low Voltage Switchgear and Controlgear part 3 BS EN60947-3 VDE 0660 NEMA KS-1 Standards Compliance Certifications IEC/EN 60947-3 Low Voltage Switchgear and Controlgear part 3 CE Marked. 4 Rockwell Automation Publicati
1985-01 Jeep XJ w/o ABS Non Disconnect 1987-01 Jeep XJ w/ ABS Non Disconnect 1997-Up Jeep TJ Non Disconnect D30 RH 303000-JJR-QG 22.68 38822QG 6.11 1.31” - 30 38875-30QG 16.57 1.31” - 30 5-760QG 1986-96 Jeep YJ Non Disconnect 1985-01 Jeep XJ w/o ABS Non Disconnect 1987-01
38 Rockwell Automation Publication 194R-SG003E-EN-P - February 2016 Approximate Dimensions Figure 8 - Cat. No. 194R-J400, Frame Size F7 UL/CSA Fused Disconnect Switches Figure 9 - Cat. No. 194R-J600, -L800, Frame Size F8 UL/CSA Fused Disconnect Switches 7.08 180 4.37 111.1 10.19 (3P) - 12.79 (4P) 25
Production of Fused Silica Wafers Manufacture of Fused Silica A method for producing fused silica wafers is the melt-ing and subsequent re-solidifying of ultra-pure quartz. Synthetic fused silica is made from gases such as SiCl 4 which is oxidized in a H 2 O 2 atmosphere. The SiO 2 dust formed hereby is
B ) Use of different industrial waste as refractory raw materials as below Fused Alumina Chrome grains for bricks and monolithic. Forsterite bonded Fused Alumina chrome grains for bricks and monolithic. MgO enriched Fused Alumina chrome grains for bricks and monolithic. Fused corundum spinel grains for bricks and monolithic.
This paper describes the design of two new fused floating-point arithmetic units and their application to the implementation of FFT and IFFT butterfly operations along with whole OFDM system. Although the fused add-subtract unit is specific to FFT applications, the fused dot product is gnal processing applications. Both the fused
The disconnect product line ranges from standard 3-pole configurations to specialty combination switches for transfer, bypass and reversing. The comprehensive ABB range of Low Voltage Disconnect Switch products is the perfect choice for all switching applications. Disconnect switches are integral to ABB's line of circuit
or bus duct Weatherproof wireway (See note 7) Overhead main disconnect krich95 1 1 1 1 NONE D9-12 1'-0" min. 1'-0" min. Company Controlled Disconnect (See note 4) Customer Controlled 3 and 4) Utility Disconnect for Customer #1 2 06/15/17 Updated title, notes and added dimensions as needed. ERG 6"-Min. in undisturbed soil. Utility for Customer .
motor pigtail Connectors Choose appropriate Blackburn disconnect for conductor size to be terminated. Note color of bands on disconnect barrel. Select proper installing die by matching die color to disconnect barrel color bands. Install die in T&B tool, insert stripped wire into barrel of disconnect and compress between color bands.
