Bio-Pharm Fittings
Bio-Pharm FittingsASME BPESemiconductorBio-PharmHygienicNEUMO Ehrenberg Group
Bio-Pharm Fit tingsMaximum Purity With Guaranteed RaWhere cleanability of fittings is the issue, every step in the production process must be carefully controlled.Our production methods insure that no mechanical damage or flaws occur during manufacturing.The cleaning procedures incorporate multi-process degreasing and washing steps provided to eliminate anyresidues of hydrocarbons and stains, using pure deionized water.Our procedures and process capabilities result in the formation of a stabilized passive layer and increasedcorrosion resistance.Our products proudly offer:Maximum CleanabilityMaxPure fittings are cleaned using a multiple step process to assure clean surface, areas inside andout with repeatability every time.Every fitting is passivated according to ASME BPE and ASTM A967 standards.Full TraceabilityWe provide full traceability for each of our products by supplying all necessary production processdata. Starting from certifications and incoming inspection of raw materials, through in-processquality control, final inspection, marking and packaging. The process is also completely documentedwith a unique job number for each BPE process component.Every Fitting is Quality InspectedAll around quality and meticulous inspection insures that every fitting will be of the highest qualityand in total compliance with all ASME-BPE standards.MaxPure fittings are 100% visual inspected.NEUMO Ehrenberg GroupThe NEUMO Ehrenberg Group, a diversified multi-national organization headquartered in Germany, wasfounded by Senator Henry Ehrenberg in 1947.Over the last decade, the Group has become a leading manufacturer for worldwide Biopharmaceuticalprocess fittings and components. With its three leading companies, NEUMO, VNE and EGMO, the group hasdeveloped a worldwide distribution networksupporting major Biopharmaceuticalmultinational accounts.The Neumo Ehrenberg Group’s synergyand strategy toward the Biopharmaceuticalsectors provide customers with innovation,all around quality and efficiency.Through our Group’s volunteer participationin leading standards organizations, weare actively involved in shaping the futurefor a cleaner, safer and more productiveworkplace in the BiopharmaceuticalProcessing Industry.2EGMONEUMO Ehrenberg Group
IndexFittings Specifications. Page 4Electro-Polishing. Page 6Tube Specifications. Page 8Ordering Information. Page 8Fittings. Page 9Elbows Page 9-12 Tees Page 13-21 Reducers Page 22-27 Use Points Page 28 True Y’s & Laterals Page 29-30 Crosses Page 31-32 Ferrules Page 33 Solid End Caps & Weld Caps Page 34 Accessories. Page 35Gaskets Page 35 Clamps Page 36-37 Adapters Page 38-39 Stub Ends & Slip On Flanges Page 39 ASME BPE DT Index. Page 40Bio Fittings. Page 44Manifolds (Multi Tee). Page 46Customized Components. Page 47MTR - Material Test Report. Page 48Technical Information. Page 49Industry Terms Glossary. Page 51ASME BPE - Certificate. Page 55Bio-Pharm Fit tings3
Bio-Pharm Fit tingsFittings SpecificationsProduct:Stainless Steel fittings comply with ASME BPE standards.Gaskets are made from compounds which are FDA approved and USP 87, 88 Pharmaceutical Class VI certified.Sizes:Stainless Steel fittings are available in sizes ¼” - 6” O.D. tube size.Material:Fittings are fabricated in AISI 316L Stainless Steel with sulfur content of 0.005-0.017% achieving superiorrepeatability for automatic orbital welding process.Dimensions & Tolerances:Dimensions as specified in ASME BPE Part DT-3-1NominalSizeWall ThicknessMechanical Polish (MP)O.D.SquarenessFace toTangent, BWall ThicknessElectropolish (EP)Off Angle, 0EquivalentAngle Off Plane, P(for O)CenterlineRadius(CLR), Rin.in.mmin.mmin.mmin.mmin.mmdegin.mmin.mm 3 81 23 4 0.005 0.13 0.003/-0.004 0.08/-0.10 0.003/-0.006 14 0.005 0.13 0.003/-0.004 0.08/-0.10 0.003/-0.006 0.08/-0.150.0050.130.0120.31.80.0300.761.12528.58 0.005 0.13 0.005/-0.008 0.13/-0.20 0.005/-0.010 0.13/-0.250.0050.130.0140.361.60.0300.761.12528.58 0.005 0.13 0.005/-0.008 0.13/-0.20 0.005/-0.010 1 0.005 0.13 0.005/-0.008 0.13/-0.20 0.005/-0.010 0.13/-0.250.0080.200.0250.641.40.0300.761.50038.10 0.008 0.20 0.005/-0.008 0.13/-0.20 0.005/-0.010 11 22 0.008 0.20 0.005/-0.008 0.13/-0.20 0.005/-0.010 21 2 0.010 0.25 0.005/-0.008 0.13/-0.20 0.005/-0.010 3 0.010 0.25 0.005/-0.008 0.13/-0.20 0.005/-0.010 0.13/-0.250.0160.410.0681.731.30.0501.274.500 114.304 0.015 0.38 0.008/-0.010 0.20/-0.25 0.008/-0.012 0.20/-0.300.0160.410.0862.181.20.0601.526.000 152.406 0.030 0.76 0.015/-0.015 0.38/-0.38 0.015/-0.017 0.38/-0.430.0300.760.1353.431.30.0601.529.000 228.60RoundnessWall ThicknessBOCTPORSquareness Faceto TangentEOff AngleEOff Plane4HeightGeneral Notes:a. Tolerance on E end-to-end and center-to-end: 0.050 in.(1.27 mm)b. Tolerance for centerline radius (CLR) is 10% of thenominal dimensionEGMONEUMO Ehrenberg Group
Fittings SpecificationsSurface Finish:Reference: ASME BPE-2014, Part SF, Table SF-2.4-1.SurfaceBPE SurfaceFinish Code DesignationInside SurfaceRa Maximumµ-in.µmOutside SurfaceSurface ConditionSurface ConditionNo finish requirementNo finish requirementPXSF0PCSF1200.51Mechanically Polished [1]Light PolishPLSF1200.51Mechanically Polished [1]Mechanically polished to 32 Ra µ-in.PDSF4150.38Mechanically Polished [1] & ElectropolishedLight PolishPMSF4150.38Mechanically Polished [1] & ElectropolishedMechanically polished to 32 Ra µ-in.PR-100.25Mechanically Polished [1] & ElectropolishedMechanically polished to 32 Ra µ-in.[1] Or any other finishing method that meets the Ra max. MaxPure fittings guarantee the Ra in all internal surfaces, including bent areas where it is difficult to polish anddifficult to measure. All Ra readings are taken across the lay, wherever possible. No single Ra reading shall exceed the Ra max. value in this table. Other Ra readings are available if agreed upon between owner/user and supplier, not to exceed values in thistable.Cleaning:A multi step cleaning cycle is conducted to ensure that fittings are cleaned with a perfect passivation layer.The cleaning process involves degreasing, pickling, electro polishing (as required) and passivation. During thefinal stage, the fittings are double-rinsed using D.I. water.Inspection Procedures:All fittings produced by EGMO production are 100% visually inspected for any surface finish imperfections, asmentioned in Table SF-2.2-1, SF-2.2-2, SF-2.4-1 and SF 2.6-1 in the ASME BPE 2014 specification. All dimensionalcharacteristics are inspected for tolerances listed in parts DT-3-1 to DT-9.3-1 in the ASME BPE 2014 specification.Fitting Marking Information:Each fitting and process component is permanently laser Marked toshow the following:a. Heat number/code traceable to material test report for each productcontact surface componentb. Material typec. Manufacturer’s name, logo, & trademarkd. Product contact surface designation for the appropriate BPE specificatione. ASME BPE markPackaging & Labeling:Each fitting is capped, bagged and labeled in full compliance with the ASME BPE standard.Every label includes a QR Code which directs to the fitting’s Material Test Report (Please refer to page 46).Documentation:Full Material Test Reports are supplied with the finished products and are available On-Line at www.MaxPure.netBio-Pharm Fit tings5
Bio-Pharm Fit tingsElectro-PolishingWhy MaxPure EP Bio-Pharm Fittings Lead the IndustryMaxPure EP is EGMO’s line of stainless steel fittings that meet - and exceed - the highly specialized surfacefinishing requirements of the bio-pharma industry as detailed in the ASME BPE (The American Society ofMechanical Engineers - Bioprocessing Equipment) guidelines.The uncompromising high quality of EGMO’s MaxPure EPproducts is a result of years of experience andaccumulated know-how in the electropolishing processduring which EGMO has optimized the following four criticalelements:a. The temperature of the electrolyte solution.b. The amplitude of the cathodes and their location relevantto the product.c. The level of acidity of the solution.d. The amount of the time that the part is immersedin the solution.NOTE: The ASME BPE guidelines are very clear, for example,that flash electropolishing, i.e., immersion of the part inthe electrolyte solution for a very short period of time, isunacceptable.Schematic Set-up of EP SystemVoltage ControlCathodeRackPiece (Anode)As a result, MaxPure EP products stand out from competingproducts in the following ways: A thicker EP layer to minimize rouging Higher Chrome concentration for better corrosion resistance Guaranteed smoothness (Ra) in all internal surfaces to reduce Bio filmEP Layer thicknessEP 20ÅASME BPE 15ÅReccomendationCompetitorFlash EP6EGMONEUMO Ehrenberg GroupEP Time period
Tube inner surfaceRemoval of ContaminantsMaxPure EP removes the contaminants that were introduced bythe various production processes. The unique MaxPure EP processachieves a level of contaminant removal that exceeds the ASME tion removedby EPMetalremovedby EPSuperior Corrosion ResistanceDuring the electropolishing process naturally occurring chrome in theproduct’s base metal is “pulled” to the surface. The thicker the chromelayer that forms on the product surface, the more resistant it will be tocorrosion over time. It will also decrease rouging.The highly optimized MaxPure EP process ensures a particularly thickchrome layer - one of the reasons why MaxPure EP fittings dominatethe bio-pharma sector.Tube inner surfaceCrCrCrCrCrChrome“pulled” beinnersurfaceUnparalleled Surface SmoothnessThe holy grail of surface finishing smoothness is to achieve as low an Ra (Roughness average) value as possible,where Ra is the arithmetic mean of the vertical deviations of the roughness profile from a mean line.Rougher surfaces create more friction and wear quicker. Surface irregularities are potential sites not only for theformation of cracks and corrosion, but for the build-up of bacteria. Mechanical polishing and buffing, which isthe first stage of surface finishing for metals, can achieve good Ra values, but inevitably leave microscopic metalparticles and other contaminants on the top surface layer, as well as compounds and foreign matter trapped justbelow the surface layer.After MaxPure EPBefore MaxPure EPThe MaxPure EP process dramatically improves the mechanically polished surface smoothness.MaxPure EP Exceeds the ASME BPE Quality RequirementsThe table below shows how MaxPure EP exceeds the ASME BPE quality requirements. The thickness of the electropolish layer, measured in Angstroms.The thicker the layer, the more contaminant-free and corrosion-resistant the fitting is. Cr/Fe: The ratio of chrome/iron.The higher the ratio, the higher the corrosion-resistance.AttributeEP layer thicknessCR/Fe ratioASME BPERecommendationEGMOElectropolishing15Å 20Å 1 1.5 Bio-Pharm Fit tings7
Bio-Pharm Fit tingsTube SpecificationsStandards: ASTM A-269 / A270-S2 ASME BPESurface Finish:Surface finish specifications are the same for fittings & tubes.Please refer to table SF-2.4-1 page 5.Tubing Dimensional Tolerances: Tubing specifications, ASTM A-269/A270-S2Tubing DiameterWall ThicknessLength(ASTM Spec.)inchmm.OD Tolerance Length(ASTM Spec.)inchmm.Wall ThicknessToleranceASTM Spec.inchmm.inchmm.1 4” 6.350.0350.89 /- 0.005 /- 0.1270.1253.175 /- 10%3 8” 9.530.0350.89 /- 0.005 /- 0.1280.1253.175 /- 10%1 2” 12.700.0651.65 /- 0.005 /- 0.1290.1253.175 /- 10%3 4” 19.050.0651.65 /- 0.005 /- 0.1300.1253.175 /- 10%1”25.400.0651.65 /- 0.005 /- 0.1310.1253.175 /- 10%11 2”38.100.0651.65 /- 0.008 /- 0.2030.1253.175 /- 10%2”50.800.0651.65 /- 0.008 /- 0.2040.1253.175 /- 10%21 2”63.500.0651.65 /- 0.010 /- 0.2540.1253.175 /- 10%3”76.200.0651.65 /- 0.015 /- 0.3810.1253.175 /- 10%4”101.600.0832.11 /- 0.015 /- 0.3810.1884.763 /- 10%6”152.400.1092.77 /- 0.030 /- 0.7620.1884.763 /- 10%Ordering InformationTo specify the part completely, start with the product descriptionand select the additional options as shown below:2 MaterialDescription 1Other materials can be supplied upon requestTE2S 1 4” ,3 8” ,1 2”, 3 4”,6L.5Size 31”, 11 2”, 2”, 21 2”, 3”, 4”, 6” PL4 Surface Finish (SF)PX, PC, PL, PM, PD, PR90 weld ends elbow, ½” size, PL surface finish.8EGMONEUMO Ehrenberg Group
Elbows - 45 TE2KS - 45 ELBOWNominalSize in. 3 81 23 414111 2221 2346DimensionsA 5006.250A rdering TE2KS6L3.0-.TE2KS6L4.0-.TE2KS6L6.0-.ABPE TABLE # DT-4.1.1-4TE2KC - 45 ELBOW CLAMP ONE ENDNominalSize in.DimensionsBOrdering CodeA in. A mm B in. B mm2.00050.8 1.000 25.4 TE2KC6L.25-. 3 82.000 50.8 1.000 25.4 TE2KC6L.375-.1 22.250 57.2 1.000 25.4 TE2KC6L.5-.3 42.250 57.2 1.000 25.4 TE2KC6L.75-.*12.250 57.2 1.125 28.6 TE2KC6L1.0-.2.500 63.5 1.438 36.5 TE2KC6L1.5-.11 223.000 76.2 1.750 44.5 TE2KC6L2.0-.3.375 85.7 2.063 52.4 TE2KC6L2.5-.21 233.625 92.1 2.375 60.3 TE2KC6L3.0-.44.500 114.3 3.125 79.4 TE2KC6L4.0-.66.250 158.8 5.250 133.4 TE2KC6L6.0-.* Note: 1” Clamp Ferrule can also be orderd with “Type A”connections according to the ASME BPE standard.14ABPE TABLE # DT-4.1.1-5ATEG2K - 45 ELBOWNominalSize in.DimensionsOrdering CodeA in. A mm1.000 25.4TEG2K6L.25-.1.000 25.4TEG2K6L.375-.1.000 25.4TEG2K6L.5-.1.000 25.4TEG2K6L.75-.*11.125 28.6TEG2K6L1.0-.1.438 36.5TEG2K6L1.5-.11 221.750 44.5TEG2K6L2.0-.2.063 52.4TEG2K6L2.5-.21 232.375 60.3TEG2K6L3.0-.43.125 79.4TEG2K6L4.0-.65.250 133.4TEG2K6L6.0-.* Note: 1” Clamp Ferrule can also be orderd with “Type A”connections according to the ASME BPE standard. 3 81 23 414ABPE TABLE # DT-4.1.1-6Bio-Pharm Fit tings9
Bio-Pharm Fit tingsElbows - 88 TE2S - 88 ELBOWNominalSize in.DimensionsTAA 12A88 88 TA34111 2221 651.651.651.651.652.11α 88 A in. A mm3.06 A 160.38.07205.0Ordering CodeTE2S886L.5-.TE2S886L.75-.88 5-.BTE2S886L3.0-.TE2S886L4.0-.TE2C - 88 ELBOWNominalSize in.DimensionsOrdering CodeTα 88 in. mm A in. A mm B in. B mm1 20.65 1.65 3.01 76.50 1.71 43.50 TE2C886L.5-.3 40.65 1.65 3.01 76.50 1.71 43.50 TE2C886L.75-.*1 0.65 1.65 3.01 76.50 2.04 51.80 TE2C886L1.0-.11 2 0.65 1.65 3.76 95.60 2.79 70.75 TE2C886L1.5-.20.65 1.65 4.73 120.10 3.62 92.00 TE2C886L2.0-.21 2 0.65 1.65 5.51 140.00 4.22 107.25 TE2C886L2.5-.30.65 1.65 6.27 159.20 4.94 125.40 TE2C886L3.0-.40.83 2.11 8.02 203.75 6.42 163.10 TE2C886L4.0-.Note: 89 & 91 elbows are available upon request.* Note: 1” Clamp Ferrule can also be orderd with “Type A”connections according to the ASME BPE standard.A88 TBTEG2C - 88 ELBOWNominalSize in.AA88 88 TA10BEGMONEUMO Ehrenberg GroupDimensionsOrdering CodeTα 88 in.mmA in. A mm1 20.651.651.6341.3 TEG2C886L.5-.3 40.651.651.6341.3 TEG2C886L.75-.*10.651.652.0151.1 TEG2C886L1.0-.0.651.652.7670.2 TEG2C886L1.5-.11 220.651.653.5189.2 TEG2C886L2.0-.0.651.654.26108.3 TEG2C886L2.5-.21 230.651.655.01127.3 TEG2C886L3.0-.40.832.116.65168.8 TEG2C886L4.0-.* Note: 1” Clamp Ferrule can also be orderd with “Type A”connections according to the ASME BPE standard.
Elbows - 90 TE2S - 90 ELBOWNominalSize in. 3 81 23 414111 2221 2346DimensionsA 00011.500A 1AOrdering 0-.TE2S6L4.0-.TE2S6L6.0-.ABPE TABLE # DT-4.1.1-1TE2C - 90 ELBOW CLAMP ONE ENDNominalSize in.DimensionsBOrderingCodeA in. A mm B in. B mm2.62566.7 1.625 41.3 TE2C6L.25-. 3 82.625 66.7 1.625 41.3 TE2C6L.375-.1 23.000 76.2 1.625 41.3 TE2C6L.5-.3 43.000 76.2 1.625 41.3 TE2C6L.75-.*13.000 76.2 2.000 50.8 TE2C6L1.0-.3.750 95.3 2.750 69.9 TE2C6L1.5-.11 224.750 120.7 3.500 88.9 TE2C6L2.0-.5.500 139.7 4.250 108.0 TE2C6L2.5-.21 236.250 158.8 5.000 127.0 TE2C6L3.0-.48.000 203.2 6.625 168.3 TE2C6L4.0-.611.500 292.1 10.500 266.7 TE2C6L6.0-.* Note: 1” Clamp Ferrule can also be orderd with “Type A”connections according to the ASME BPE standard.14DimensionsOrdering CodeA in. A mm1.625 41.3TEG2C6L.25-.1.625 41.3TEG2C6L.375-.1.625 41.3TEG2C6L.5-.1.625 41.3TEG2C6L.75-.*12.000 50.8TEG2C6L1.0-.2.750 69.9TEG2C6L1.5-.11 223.500 88.9TEG2C6L2.0-.4.250 108.0TEG2C6L2.5-.21 235.000 127.0TEG2C6L3.0-.46.625 168.3TEG2C6L4.0-.610.500 266.7TEG2C6L6.0-.* Note: 1” Clamp Ferrule can also be orderd with “Type A”connections according to the ASME BPE standard. 3 81 23 4BPE TABLE # DT-4.1.1-2ATEG2C - 90 ELBOWNominalSize in.AA14BPE TABLE # DT-4.1.1-3Bio-Pharm Fit tings11
Bio-Pharm Fit tingsElbows - 92 TE2S - 92 ELBOWNominalSize in.DimensionsTA92 A92 1234111 2A221 1.651.651.651.651.652.115α 92 A in. A .26.19157.27.93201.4Ordering CodeTE2S926L.5-.92 .0-.TE2S926L2.5-.TE2S926L3.0-.TE2S926L4.0-.TE2C - 92 ELBOWNominalSize in.AOrdering CodeTα 92 in. mm A in. A mm B in. B mm1 20.65 1.65 2.98 75.7 1.66 42.1 TE2C926L.5-.3 40.65 1.65 2.98 75.7 1.66 42.1 TE2C926L.75-.*1 0.65 1.65 2.98 75.7 2.05 52.1 TE2C926L1.0-.11 2 0.65 1.65 3.73 94.8 2.73 69.3 TE2C926L1.5-.20.65 1.65 4.77 121.2 3.47 88.2 TE2C926L2.0-.21 2 0.65 1.65 5.43 137.8 4.10 104.2 TE2C926L2.5-.30.65 1.65 6.17 156.8 4.83 122.8 TE2C926L3.0-.40.83 2.115 7.91 200.8 6.42 163.0 TE2C926L4.0-.Note: 89 & 91 elbows are available upon request.* Note: 1” Clamp Ferrule can also be orderd with “Type A”connections according to the ASME BPE standard.92 TADimensionsBTEG2C - 92 ELBOWAADimensionsOrdering CodeTα 92 in.mmA in. A mm1 20.651.651.6140.8 TEG2C926L.5-.T 30.651.651.6140.8 TEG2C926L.75-. 4B *10.651.651.9950.5 TEG2C926L1.0-.0.651.652.7469.6 TEG2C926L1.5-.11 220.651.653.4988.6 TEG2C926L2.0-.0.651.654.04102.6 TEG2C926L2.5-.21 230.651.654.76120.8 TEG2C926L3.0-.40.832.115 6.30160.0 TEG2C926L4.0-.* Note: 1” Clamp Ferrule can also be orderd with “Type A”connections according to the ASME BPE standard.92 A1292 NominalSize in.EGMONEUMO Ehrenberg Group
Tees - EqualTE7WWW - TEENominalSize in. 3 81 23 414111 2221 2346DimensionsOrdering CodeA in.1.750A TE7WWW6L1.0-.TE7WWW6L1.5-.TE7W 7WWW6L6.0-.AAAABPE TABLE # DT-4.1.2-1AATE7WWC - TEENominalSize in.DimensionsOrdering CodeA in. A mm B in. B mm C in. C mm1.875 47.6 2.250 57.20 3.750 95.2 TE7WWC6L.5-.2.000 50.8 2.375 60.30 4.000 101.6 TE7WWC6L.75-.*12.125 54.0 2.625 66.68 4.250 108.0 TE7WWC6L1.0-.2.375 60.3 2.875 73.03 4.750 120.6 TE7WWC6L1.5-.11 222.875 73.0 3.375 85.70 5.750 146.0 TE7WWC6L2.0-.3.125 79.4 3.625 92.08 6.250 158.8 TE7WWC6L2.5-.21 233.375 85.7 3.875 98.43 6.750 171.4 TE7WWC6L3.0-.44.125 104.8 4.750 120.65 8.250 209.6 TE7WWC6L4.0-.65.625 142.9 7.125 181.0 11.250 285.8 TE7WWC6L6.0-.* Note: 1” Clamp Ferrule can also be orderd with “Type A” connectionsaccording to the ASME BPE standard.BBB 3 412ACAACCTEG7 - TEENominal Sizein.DimensionsA in.A .0-.12.87573.0TEG76L1.5-.1 223.37585.7TEG76L2.0-.13.62592.1TEG76L2.5-.2 181.0TEG76L6.0-.* Note: 1” Clamp Ferrule can also be orderd with “Type A” connectionsaccording to the ASME BPE standard. 3 81 23 4AOrdering CodeAA14AAABPE TABLE # DT-4.1.2-4Bio-Pharm Fit tings13
Bio-Pharm Fit tingsTees - 88 88oATE7WWW886L - BRANCH TEE 88 NominalSize in.DimensionsOrdering CodeA in.A 1 222.87573TE7WWW886L2.0-.3.12579.4TE7WWW886L2.5-.21 -.Note: Reducing sizes and special end configurations can besupplied upon request.ATEES - 176 TE7WWW1766L - 176 RUN TEENominalSize in.A88B14oo88BEGMONEUMO Ehrenberg GroupDimensionsOrdering CodeA in. A mm B in. B mm12.255.88 2.12 53.848 TE7WWW1766L1.0-.2.46 62.484 2.37 60.198 TE7WWW1766L1.5-.11 222.98 75.692 2.87 72.898 TE7WWW1766L2.0-.3.24 82.296 3.12 79.248 TE7WWW1766L2.5-.21 233.588.93.73 94.742 TE7WWW1766L3.0-.44.27 108.458 4.12 104.648 TE7WWW1766L4.0-.Note: Reducing sizes and special end configurations can besupplied upon request.
Tees - Short OutletTE7WWCS - SHORT OUTLET TEENominalSize in.DimensionsOrdering CodeA in. A mm B in. B mm1.750 44.5 1.000 25.4TE7WWCS6L.25-.1.750 44.5 1.000 25.4TE7WWCS6L.375-.1.875 47.6 1.000 25.4TE7WWCS6L.5-.2.000 50.8 1.125 28.6TE7WWCS6L.75-.*12.125 54.0 1.125 28.6TE7WWCS6L1.0-.2.375 60.3 1.375 34.9TE7WWCS6L1.5-.11 222.875 73.0 1.625 41.3TE7WWCS6L2.0-.3.125 79.4 1.875 47.6TE7WWCS6L2.5-.21 233.375 85.7 2.125 54.0TE7WWCS6L3.0-.44.125 104.8 2.750 69.9TE7WWCS6L4.0-.65.625 142.9 4.625 117.5TE7WWCS6L6.0-.* Note: 1” Clamp Ferrule can also be orderd with “Type A” connectionsaccording to the ASME BPE standard. 3 81 23 4BB14ABPE TABLE # DT-4.1.2-2ATE7WCSW - SHORT OUTLET RUN TEENominalSize in.DimensionsOrdering CodeA in. A mm B in. B mm C in. C mm1 40.875 22.2 1.750 44.5 1.750 44.5 TE7WCSW6L.25-.3 80.875 22.2 1.750 44.5 1.750 44.5 TE7WCSW6L.375-.1 20.875 22.2 1.875 47.6 1.875 47.6 TE7WCSW6L.5-.3 41.000 25.4 2.000 50.8 2.000 50.8 TE7WCSW6L.75-.*11.125 28.6 2.125 54.0 2.125 54.0 TE7WCSW6L1.0-.1.375 34.9 2.375 60.3 2.375 60.3 TE7WCSW6L1.5-.11 221.625 41.3 2.875 73.0 2.875 73.0 TE7WCSW6L2.0-.1.875 47.6 3.125 79.4 3.125 79.4 TE7WCSW6L2.5-.21 232.125 54.0 3.375 85.7 3.375 85.7 TE7WCSW6L3.0-.42.750 69.9 4.125 104.8 4.125 104.8 TE7WCSW6L4.0-.64.625 117.5 5.625 142.9 5.625 142.9 TE7WCSW6L6.0-.* Note: 1” Clamp Ferrule can also be orderd with “Type A” connectionsaccording to the ASME BPE standard.BCBAABABPE TABLE # DT-4.1.2-3TEG7S - SHORT OUTLET TEENominalSize in. 3 412DimensionsOrdering CodeA in. A mm B in. B mm2.250 57.2 1.000 25.4TEG7S6L.5-.2.375 60.3 1.125 28.6TEG7S6L.75-.*12.625 66.7 1.125 28.6TEG7S6L1.0-.2.875 73.0 1.375 34.9TEG7S6L1.5-.11 223.375 85.7 1.625 41.3TEG7S6L2.0-.3.625 92.1 1.875 47.6TEG7S6L2.5-.21 233.875 98.4 2.125 54.0TEG7S6L3.0-.44.750 120.7 2.750 69.9TEG7S6L4.0-.67.125 181.0 4.625 117.5TEG7S6L6.0-.* Note: 1” Clamp Ferrule can also be orderd with “Type A” connectionsaccording to the ASME BPE standard.CBBAABPE TABLE # DT-4.1.2-5Bio-Pharm Fit tings15
Bio-Pharm Fit tingsTees - ReducingTE7RWWW - REDUCING TEEBNominal Size in. x 1 4 x 1 41 2 x 3 83 4 x 1 43 4 x 3 83 4 x 1 21 x 1 41 x 3 81 x 1 21 x 3 411 2 x 1 211 2 x 3 411 2 x 12 x 1 22 x 3 438A12BPE TABLE # DT-4.1.2-62x12 x 11 221 2 x 1 221 2 x 3 421 2 x 121 2 x 11 221 2 x 23 x 1 23 x 3 43x13 x 11 23x23 x 21 24 x 1 24 x 3 44x14 x 11 24x24 x 21 24x36x36x416EGMONEUMO Ehrenberg GroupA 1254.1254.1254.1254.1254.1255.6255.625DimensionsA mm B in. B mm44.5 1.750 44.547.6 1.875 47.647.6 1.875 47.650.8 2.000 50.850.8 2.000 50.850.8 2.000 50.854.0 2.125 54.054.0 2.125 54.054.0 2.125 54.054.0 2.125 54.060.3 2.375 60.360.3 2.375 60.360.3 2.375 60.373.0 2.625 66.773.0 2.625 66.773.0 2.625 66.773.0 2.625 66.779.4 2.875 73.079.4 2.875 73.079.4 2.875 73.079.4 2.875 73.079.4 2.875 73.085.7 3.125 79.485.7 3.125 79.485.7 3.125 79.485.7 3.125 79.485.7 3.125 79.485.7 3.125 79.4104.8 3.625 92.1104.8 3.625 92.1104.8 3.625 92.1104.8 3.625 92.1104.8 3.875 98.4104.8 3.875 98.4104.8 3.875 98.4142.9 4.875 123.8142.9 5.125 130.2Ordering RWWW6L6.0x4.0-.
Tees - ReducingTE7RWWC - REDUCING TEENominal Size in.DimensionsOrdering CodeA in. A mm B in. B mm3 4 x 1 22.000 50.8 2.500 63.5 TE7RWWC6L.75x.5-.2.125 54.0 2.625 66.7 TE7RWWC6L1.0x.5-.* 1 x 1 22.125 54.0 2.625 66.7 TE7RWWC6L1.0x.75-.* 1 x 3 42.375 60.3 2.875 73.0 TE7RWWC6L1.5x.5-.11 2 x 1 22.375 60.3 2.875 73.0 TE7RWWC6L1.5x.75-.11 2 x 3 42.375 60.3 2.875 73.0 TE7RWWC6L1.5x1.0-.11 2 x 1*2.875 73.0 3.125 79.4 TE7RWWC6L2.0x.5-.2 x 1 22.875 73.0 3.125 79.4 TE7RWWC6L2.0x.75-.2 x 3 42 x 1*2.875 73.0 3.125 79.4 TE7RWWC6L2.0x1.0-.2.875 73.0 3.125 79.4 TE7RWWC6L2.0x1.5-.2 x 11 23.125 79.4 3.375 85.7 TE7RWWC6L2.5x.5-.21 2 x 1 23.125 79.4 3.375 85.7 TE7RWWC6L2.5x1.5-.21 2 x 11 23.125 79.4 3.375 85.7 TE7RWWC6L2.5x2.0-.21 2 x 23 x 1*3.375 85.7 3.625 92.1 TE7RWWC6L3.0x1.0-.3.375 85.7 3.625 92.1 TE7RWWC6L3.0x1.5-.3 x 11 23x23.375 85.7 3.625 92.1 TE7RWWC6L3.0x2.0-.3.375 85.7 3.625 92.1 TE7RWWC6L3.0x2.5-.3 x 21 24 x 1*4.125 104.8 4.125 104.8 TE7RWWC6L4.0x1.0-.4.125 104.8 4.125 104.8 TE7RWWC6L4.0x1.5-.4 x 11 24x24.125 104.8 4.375 111.1 TE7RWWC6L4.0x2.0-.4.125 104.8 4.375 111.1 TE7RWWC6L4.0x2.5-.4 x 21 24x34.125 104.8 4.375 111.1 TE7RWWC6L4.0x3.0-.6x35.625 142.9 5.375 136.5 TE7RWWC6L6.0x3.0-.6x45.625 142.9 5.750 146.1 TE7RWWC6L6.0x4.0-.* Note: 1” Clamp Ferrule can also be orderd with “Type A” connectionsaccording to the ASME BPE standard.BABio-Pharm Fit tings17
Bio-Pharm Fit tingsTees - ReducingTE7RWWCS-SHORT OUTLET REDUCING TEEBABPE TABLE # DT-4.1.2-718Nominal Size in.DimensionsOrdering CodeA in. A mm B in. B mm3 8 x 1 41.750 44.5 1.000 25.4 TE7RWWCS6L.375x.25-.1 2 x 1 41.875 47.6 1.000 25.4 TE7RWWCS6L.5x.25-.1 2 x 3 81.875 47.6 1.000 25.4 TE7RWWCS6L.5x.375-.3 4 x 1 42.000 50.8 1.000 25.4 TE7RWWCS6L.75x.25-.3 4 x 3 82.000 50.8 1.000 25.4 TE7RWWCS6L.75x.375-.3 4 x 1 22.000 50.8 1.000 25.4 TE7RWWCS6L.75x.5-.2.125 54.0 1.125 28.6 TE7RWWCS6L1.0x.5-.1 x 1 42.125 54.0 1.125 28.6 TE7RWWCS6L1.0x0.3751 x 3 82.125 54.0 1.125 28.6 TE7RWWCS6L1.0x.5-.1 x 1 22.125 54.0 1.125 28.6 TE7RWWCS6L1.0x.75-.1 x 3 42.375 60.3 1.375 34.9 TE7RWWCS6L1.5x.5-.11 2 x 1 22.375 60.3 1.375 34.9 TE7RWWCS6L1.5x.75-.11 2 x 3 42.375 60.3 1.375 34.9 TE7RWWCS6L1.5x1.0-.11 2 x 1*2.875 73.0 1.625 41.3 TE7RWWCS6L2.0x.5-.2 x 1 22.875 73.0 1.625 41.3 TE7RWWCS6L2.0x.75-.2 x 3 42 x 1*2.875 73.0 1.625 41.3 TE7RWWCS6L2.0x1.0-.2.875 73.0 1.625 41.3 TE7RWWCS6L2.0x1.5-.2 x 11 23.125 79.4 1.875 47.6 TE7RWWCS6L2.5x.5-.21 2 x 1 23.125 79.4 1.875 47.6 TE7RWWCS6L2.5x.75-.21 2 x 3 43.125 79.4 1.875 47.6 TE7RWWCS6L2.5x1.0-.21 2 x 1*3.125 79.4 1.875 47.6 TE7RWWCS6L2.5x1.5-.21 2 x 11 23.125 79.4 1.875 47.6 TE7RWWCS6L2.5x2.0-.21 2 x 23.375 85.7 2.125 54.0 TE7RWWCS6L4.0x.5-.3 x 1 23.375 85.7 2.125 54.0 TE7RWWCS6L4.0x.75-.3 x 3 43 x 1*3.375 85.7 2.125 54.0 TE7RWWCS6L3.0x1.0-.3.375 85.7 2.125 54.0 TE7RWWCS6L3.0x1.5-.3 x 11 23x23.375 85.7 2.125 54.0 TE7RWWCS6L3.0x2.0-.3.375 85.7 2.125 54.0 TE7RWWCS6L3.0x2.5-.3 x 21 24.125 104.8 2.625 66.7 TE7RWWCS6L3.0x.5-.4 x 1 24.125 104.8 2.625 66.7 TE7RWWCS6L3.0x.75-.4 x 3 44 x 1*4.125 104.8 2.625 66.7 TE7RWWCS6L4.0x1.0-.4.125 104.8 2.625 66.7 TE7RWWCS6L4.0x1.5-.4 x 11 24x24.125 104.8 2.625 66.7 TE7RWWCS6L4.0x2.0-.4.125 104.8 2.625 66.7 TE7RWWCS6L4.0x2.5-.4 x 21 24x34.125 104.8 2.625 66.7 TE7RWWCS6L4.0x3.0-.5.625 142.9 3.625 92.1 TE7RWWCS6L6.0x.5-.6 x 1 25.625 142.9 3.625 92.1 TE7RWWCS6L6.0x.75-.6 x 3 46 x 1*5.625 142.9 3.625 92.1 TE7RWWCS6L6.0x1.0-.5.625 142.9 3.625 92.1 TE7RWWCS6L6.0x1.5-.6 x 11 26x25.625 142.9 3.625 92.1 TE7RWWCS6L6.0x2.0-.5.625 142.9 3.625 92.1 TE7RWWCS6L6.0x2.5-.6 x 21 26x35.625 142.9 3.625 92.1 TE
Bio-Pharm Fittings 4 EGMO NEUMO Ehrenberg Group Fittings Specifications Product: Stainless Steel fittings comply with ASME BPE standards. Gaskets are made from compounds which are FDA a
May 25, 2020 · PHARM 539 Princ Pharm Management 3 PHARM 543b Pharm Law/Ethics 3 PHARM 563 Applied Ptherapeutics I 2 PHARM 537 Chem Depend Conc 2 PHARM 593 Pharmacy Practice V 3 PHARM 594 Pharmacy Practice VI 2 PHARM 592 Pharm Practice IV 3 PharmP 514 IPPE 1 PharmP 531 IPPE* 1 PharmP 513 IPPE 1 PharmP 52
ENG 300 (Functional English) PHARM 310 PHARM 311 PHARM 312 PHARM 313 PHARM 314 English-A (Communication & Writing Pharmaceutics-IA (Physical Pharmacy) Pharmaceutical Chemistry-IA (Organic) Pharmaceutical Chemistry-IIA (Biochemistry) Physiology-A Anatomy & Histology 2 3 1 3 1 3 1 3 1 3 1 ENG 301 PHARM 315
M.Pharm. Integrated first degree of BITS in Pharmacy or its equivalent GPAT M.Pharm. (Specialization in Pharmaceutical Chemistry) M.Pharm. (Specialization in Pharmaceutics) M.Pharm. (Specialization in Pharmacology) Candidates applying to any of the four M.Pharm
Dawn Roush, Env Mgr 14 Kevin Goodwin, Aqua Bio Spl 13 Bill Keiper, Aqua Bio Spl 13 Sam Noffke, Aqua Bio 12 Lee Schoen, Aqua Bio 11 Elizabeth Stieber, Aqua Bio 11 Kelly Turek, Aqua Bio 12 Chris Vandenberg, EQA 11 Jeff Varricchione, Aqua Bio 12 Matt Wesener, Aqua Bio 11 Marcy Knoll Wilmes, Aqua Bio Spl 13
159386 BIO BIO 301 Biotechnology and Society 158405 BIO BIO 202 Microbiology and Immunology 158396 BIO BIO 304 Ecology of Place 159428 BIO BIO 300 Population, Resources and Environment 159430 BIO ENS 110 Populations, Resources and Environment 151999 ENG ENG 340 Global British Literature
Automotive Hose and Fittings CONTENT 6 6.1 6.2 6.3 Hose and Fittings 634 G-Line Hose and Fittings 634 Quick Release Couplings 645 600 - 700 Series Hose and Fittings 648 200 Series Hose and Fittings 673 Push Fit Hose and Fittings 679 Adaptors 683 Air Conditioning Hose and 695 Fittings . 634 www.pirtek.com 6. 1 Series Page Hose 910 910 636 Hose 811 811 636 Hose 910 FC 910 FC 636 (Fuel Cell) G .
Sanitary Solutions, Inc. Bio-Pharm Fittings 1-888-909-3569 S
Operation Guide for the Mercedes-Benz GLA/CLA This is a basic operation guide for those who are driving the Mercedes-Benz GLA/CLA vehicle for the first time. Please read this guide before you leave the rental office if you are not familiar with operation. For more information about the vehicle, please read the instruction manual. Basic Operations to Note Before Driving the Vehicle Starting .
