CardScan Executive & Team Quick Start Guide

2y ago
12 Views
2 Downloads
1.25 MB
9 Pages
Last View : 12d ago
Last Download : 2m ago
Upload by : Kaden Thurman
Transcription

Quick Start GuideGuide de démarrage rapideErste schritteBeknopte handleidingGuida rapidaGuía rápida de inicioGuia de início rápidoCardScan*Executive & Team

DYMO CardScan* Executive and CardScan* PersonalThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC (Federal Communications Committee) rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy, and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user isencouraged to try correcting the interference by one or more of the following measures: Reorient the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Use shielded cables to connect this device to computers. Consult the dealer or an experienced radio/TV technician for help.You may find helpful the following booklet, prepared by the FCC: Interference Handbook. This bookletis available from the U.S. Government Printing Office, Superintendent of Documents, Washington, DC20402-9325.Note: Changes or modifications to this unit not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment and void the manufacturer’s warranty.

CardScan Quick Start GuideFollow these steps to install the CardScan software and scanner.Unpacking your CardScan Scanner1 Unpack your scanner and save the packing materials.2 Make sure you have all the items shown in Figure 1.Calibration cardQuick Start GuideCardScan Calibration CardThis side upCarte d’etalonnageCe côté vers le hautKalibrierungskarteDiese seite nach obenà Tarjeta de calibraciónEsta lado para arribaP9192CardScan scannerUSB cableDVDFigure 11

Installing the SoftwareThis section describes how to install the CardScan software on a Windowsor Mac operating system.To install the CardScan software, you must be logged in as Administrator.WINDOWS You have the choice of installing the CardScan software, theCardScan for Outlook Add-In, or both. To install both versions, follow theinstructions to install the CardScan software and then follow the instructionsto install the CardScan for Outlook Add-In.To install the software on a Windows system1 Insert the CardScan software DVDinto your CD-ROM/DVD drive. After afew seconds, the installation screenappears.If the installation screen does notappear, do the following:Figure 2a. On the Windows taskbar, click Start and then choose Run. TheRun dialog box appears.b. Enter D:\autorun.exe (where D is the letter assigned to the DVDdrive), and then click OK.2 Enter the Product Key located on the DVD sleeve, and thenclick Continue.2

3 Do one of the following: If you want to scan cards directly into Outlook, click InstallCardScan for Outlook Add-In and then follow the on-screeninstructions. To install the CardScan Executive or Team software, click InstallCardScan Executive/Team and then follow the on-screeninstructions.The selected software is installed.To install the software on a Mac OS system1 Insert the CardScan software DVD into your CD-ROM/DVD drive.After a few seconds, the installation screen appears.2 Drag the CardScan icon to the Applications folder.Connecting Your CardScan ScannerTo connect your CardScan scanner1 Plug the USB cable into the USB port onthe back of the scanner.2 Connect the other end of the USB cableinto an available USB port on yourcomputer.Figure 3NOTE If the scanner was already connected,unplug the scanner and then plug the scanner in again.3

Starting CardScan for the First TimeThis section describes how to start CardScan for the first time. Dependingon the version of the software you installed, refer to the following sections: Starting the CardScan Software for the First Time (Windows) Starting the CardScan for Outlook Add-In for the First Time Starting the CardScan Software for the First Time (Mac)Starting the CardScan Software for the First Time (Windows)The first time you open the application, the CardScan Setup Wizardappears and guides you through the following steps: Setting up your scanner Registering the softwareTo start CardScan for the first time1 Do one of the following: Double-clickon your desktop. Click Start, then Programs CardScan CardScan.The CardScan software is activated automatically and the CardScanSetup Wizard starts.2 In the CardScan Setup Wizard, click Next and then follow the on-screen instructions to set up your scanner.4

3 On the Register CardScan page of the CardScan Setup Wizard,click Register Now and then follow the on-screen instructions toregister the software.4 Follow the instructions in the Create or Open a File dialog box tocreate a new CardScan data file.NOTE You can use the CardScan Setup Wizard at any time. The CardScanSetup Wizard is available from the Tools menu in CardScan.Starting the CardScan for Outlook Add-In for the First TimeThe first time you open Outlook after installing the CardScan for OutlookAdd-In, you are prompted to activate the software.To start the CardScan for Outlook Add-In for the first time1 Open Microsoft Outlook.2 Click Yes in the CardScan for Outlook dialog box to activatethe software.3 Enter the Product Key located on the DVD sleeve, and then click OK.4 Click OK on the Activation completed successfully message.5

Starting the CardScan Software for the First Time (Mac)The first time you open the application, the CardScan Setup Assistantappears and guides you through the following steps: Accepting the License Agreement Activating the software Registering the softwareTo start CardScan for the first time1 Double-clickin the Applications folder to open the CardScansoftware.2 On the License Agreement page of the Setup Assistant, follow theon-screen instructions to accept to the License Agreement.3 On the Activation page, do one of the following: Select Activate Online, enter the Product Key located on the DVDsleeve, and then click Activate. Select Activate by phone, and then follow the instructionsprovided by Customer Support.4 On the Register CardScan page, click Register Now and thenfollow the on-screen instructions to register the software.For complete details on using the software, refer to the online Help.If you need further assistance, contact Technical Support at (877) 724-8324.You can also obtain support at www.dymo.com.6

*DYMO, CardScan and LabelWriter are registered marks in the United States and other countries.*DYMO, CardScan et LabelWriter sont des marques déposées aux États-Unis d’Amérique et dans d’autres pays.*DYMO, CardScan und LabelWriter sind eingetragene Marken in den USA und anderen Ländern.*DYMO, CardScan en LabelWriter zijn gedeponeerde handelsmerken in de Verenigde Staten en andere landen.*DYMO, CardScan e LabelWriter sono marchi depositati negli Stati Uniti e in altri paesi.*DYMO, CardScan y LabelWriter son marcas registradas en los Estados Unidos y en otros países.*DYMO, CardScan e LabelWriter são marcas registradas nos Estados Unidos e em outros países.Distributed by/Distribué par/Distribuido por:DYMO, Atlanta, GA 30328 2010 Sanford, L.P. www.dymo.comImported into Canada by/Importé au Canada par Sanford Canada L.P., Oakville, ON L6J 3J3En Mexico importado y distribuido por: Newell Rubbermaid de México S de R.L. de C.V.Av. Vasco de Quiroga 3000 P. Plaza 1, Col. Santa Fe, Del. Alvaro Obregón C.P. 01210, Mexico, D.F.Distributed by: DYMO bvba, Industriepark-Noord 30, B-9100 Sint-Niklaas, Belgium21W006494

3 3 Do one of the following: If you want to scan cards directly into Outlook, click Install CardScan for Outlook Add-In and then follow the on-screen instructions. To install the CardScan Executive or Team software, click Install CardScan Executive/Team and then follow the on-screen instructions. The selected software is installed. To

Related Documents:

The first time you open Outlook after installing the CardScan for Outlook Add-In, you are prompted to activate the software. To start the CardScan for Outlook Add-In for the first time 1 Open Microsoft Outlook. 2 Click Yes in the CardScan for Outlook dialog box to activate the software. 3 Enter the Product Key located on the DVD sleeve, and .

1 Follow these steps to install the CardScan software and scanner. Unpacking your CardScan Scanner 1 Unpack your scanner and save the packing materials. 2 Make sure you have all the items shown in F

team xl team 2. t050710-f xl team 3. t050907-f xl team xl team 4. t050912-f xl team xl team 5. t050825-f xl team xl team 6. t050903-f xl team. 2 7. t050914-f xl team xl team 8. t061018-f xl team 9. t061105-f xl team name xl team 10. t060717-f xl team xl team 11. t070921-f xl team xl team xl team 12. t061116-f xl team. 3 13. 020904-f name/# xl .

4.1 Quick Start Tutorial When Collect is opened for the first time, the Quick Start tutorial is displayed. Quick Start is a series of five screens that provide a summary review of the main capabilities of the app. Tap the Forward icon to move through the Quick Start screens. Tap Start to open the app after finishing with the Quick Start screens .

Round 3 Game 1 Game 2 Game 3 Game 4 Team 1 Team 7 Team 8 Team 2 Team 6 Team 5 Team 4 Team 3 Continuing the method, which team plays Team 7 in Round 4? Team . 14 Infection Model This is a simple example of how people in a community might become infected with a disease. O

team members throughout the contest with each team member losing at least 10 pounds, the team name will be placed in a drawing for one of three grand prizes. The First Team drawn will win 250 each, The Second Team drawn, 500 per team member, and the Third Team drawn will win 1,000 per team member. Team CAVHCS is already off to a great start. The

CorelDRAW Home & Student Suite 2018 Quick Start Guide Author: Corel Keywords: CorelDRAW Home & Student Suite 2018 quick start guide; quick start guide; CorelDRAW Home & Student Suite 2018 Getting Started Created Date: 4/29/2020 7:51:12 AM

BEC Preliminary involves three papers, for BEC Vantage and BEC Higher you need to sit four. The BEC Preliminary papers are: Reading and Writing (1 hour and 20 minutes – Reading includes seven tasks, like a multiple choice test and a gap-filling exercise; in the Writing test you’ll be asked to produce two short pieces relating to business); Listening (around 40 minutes – based on input .