PlayStation Setup Guide - Netcomm

3y ago
47 Views
2 Downloads
605.64 KB
7 Pages
Last View : 2m ago
Last Download : 3m ago
Upload by : Axel Lin
Transcription

PlayStation Setup GuideNF1901ACV FAQsPlayStation Setup OverviewThere are two ways of allowing your PlayStation to communicate with the internet. One is through port forwardingand the other is through the DMZ feature.Port forwarding will enable specified ports on the NL1901ACV to get access to your PlayStation to communicatewith the internet as if they were directly connected by allowing access through.Setting your PlayStation as a DMZ host opens all the ports on the NL1901ACV to allow access to a designateddevice.This guide has been revised to include the latest changes and updates from the NL1901ACV's new NC2 web userinterface.PrerequisiteBefore you configure the NL1901ACV, you will need to set a static IP address on your PlayStation.Please follow the instructions at the link below to set a static IP address on your ticip-ps3-playstation-3.htmYou can use an IP address like 192.168.20.100 for example.Important informationYou can only forward a port to one location (IP address).In some cases, this may cause issues when multiple LAN devices (computers, game consoles, or VOIP ATAs) attempt to useonline gaming as same time or make multiple VOIP service connections.In these cases, you would need to use an alternate port for any subsequent connections after the first device.Please consult your VOIP provider or game manufacturer for assistance with this.NF1901ACV FAQs – PlayStation Setup GuideFQ01121 v. 1.1 March 20191 of 7 NetComm Wireless 2019

Setting the PlayStation as the DMZ HostLog in to the web interfaceConnect a computer and the NF18ACV using an Ethernet cable. (A yellow Ethernet cable was provided with yourNL1901ACV).1Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the addressbar and press Enter.http://192.168.20.123Enter the following credentials in the User Name and Password fields:User Name:adminPassword:The serial number found on the label on the back of the deviceClick the OK/Log In button.Note – If no authentication prompt is displayed or you see a request time out message, refer to the What if I cannot access Web UserInterface guide from FAQs section.1Select the Click on the Advanced Setup menu at the left of the page, then click on NAT options and thenclick on DMZ Host options:NF1901ACV FAQs – PlayStation Setup GuideFQ01121 v. 1.1 March 20192 of 7 NetComm Wireless 2019

2Enter the static IP address of the PlayStation in the DMZ Host IP Address field. In this example, 192.168.20.100 is theIP address of the PlayStation.3Click on the Save/Apply button4Reboot the modem: Click Management menu on the left-hand side of the page then click Reboot options:5 Click the Reboot button.NF1901ACV FAQs – PlayStation Setup GuideFQ01121 v. 1.1 March 20193 of 7 NetComm Wireless 2019

Add a Port Forwarding Rule for PlayStationLog in to the web interface4Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the addressbar and press Enter.http://192.168.20.15Enter the following credentials in the User Name and Password fields:User Name:adminPassword:The serial number found on the label on the back of the device6Click the OK/Log In button.6Port 80 is also used to access webpage of the NL1901ACV so it needs to be re-configured.It is recommended to change the webpage port number to 8000 as described below (Remember that fromnow onwards you can only access the webpage with port 8000).7Click the Save/Apply button.NF1901ACV FAQs – PlayStation Setup GuideFQ01121 v. 1.1 March 20194 of 7 NetComm Wireless 2019

8Open a web browser (such as Internet Explorer, Google Chrome or Firefox), type http://192.168.20.1:8000into the address bar and press enter.9Click on the Advanced Setup at the left of the page, then click on NAT option and then click Virtual Serversoptions.10Click the Add button to add a new port forwarding rule.11Check that the interface currently selected in the Use Interface field is correct.12Choose the Use Interface from the drop-down menu as either ADSL / VDSL / or ETH WAN depending onyour connection type for internet.13To create your own defined port forwarding rule, select the Custom Service field and give the port forwardingrule a unique name.This example uses Gaming Console.NF1901ACV FAQs – PlayStation Setup GuideFQ01121 v. 1.1 March 20195 of 7 NetComm Wireless 2019

14Enter the IP address of the PlayStation that you wish to port forward to in the Server IP Address field.In this example, the IP address of the PlayStation is 192.168.20.10015Enter the port number or port range into the External Port Start and External Port End fields.Note that the Internal Port Start and Internal Port End fields will automatically populate with the same portnumbers.16Select the Protocol to be used for the port forwarding rule. Options include TCP, UDP or TCP/UDP for both.Ports and protocolsThe ports and protocols for PlayStation are as follows:PlayStation 3 s3/current/settings/connecttest.htmlPROTOCOLPORT NUMBERTCP80TCP443TCP and UDP3478TCP and UDP3479TCP3480TCP5223TCP8080UDP3658PlayStation 4 -ps4/default.htmPROTOCOLPORT NUMBERTCP80TCP443TCP and UDP3478TCP and UDP3479TCP3480TCP1935NF1901ACV FAQs – PlayStation Setup GuideFQ01121 v. 1.1 March 20196 of 7 NetComm Wireless 2019

17Click the Apply/Save button.18The port forwarding rules will now be displayed as the example above shows.19You must now reboot the modem. Select the Management menu on the left-hand side of the page thenclick its Reboot option.20And then click the Reboot button.Important informationYou can only forward a port to one location (IP address).In some cases, this may cause issues when multiple LAN devices (computers, game consoles, or VOIP ATAs) attempt to useonline gaming as same time or make multiple VOIP service connections.In these cases, you would need to use an alternate port for any subsequent connections after the first device.Please consult your VOIP provider or game manufacturer for assistance with this.NF1901ACV FAQs – PlayStation Setup GuideFQ01121 v. 1.1 March 20197 of 7 NetComm Wireless 2019

14 Enter the IP address of the PlayStation that you wish to port forward to in the Server IP Address field. In this example, the IP address of the PlayStation is 192.168.20.100 15 portEnter the number or port range into the External Port Start and External Port End fields.

Related Documents:

ADSL2 Wireless N300 Modem Router with VoIP User Guide YML9WMAXXN 6 www.netcomm.com.au Introduction The NetComm NB9WMAXXn ADSL2 Wireless N Modem Router with V

3.1. 続の場合 3.1.1. 接続 � 図 2 接続例(全体) シミュレーター ACSIM制御用PC ルーター等 PlayStation モニター PS対応ハンコン HDMIなど LAN USB 専用線

conforms to PlayStation 3 specifications for the PAL market only. It cannot be used on other specification versions of PlayStation 3. Read the PlayStation 3 system Instruction Manual carefully to ensure correct usage. When inserting this disc in the PlayStation 3 system always place it with the required playback side facing down.

This disc conforms to PlayStation 3 specifications for the PAL market only. It cannot be used on other specification versions of PlayStation 3. Read the PlayStation 3 system Instruction Manual carefully to ensure correct usage. When inserting this disc in the PlayStation 3 s

This disc conforms to PlayStation 3 specifications for the PAL market only. It cannot be used on other specification versions of PlayStation 3. Read the PlayStation 3 system Instruction Manual carefully to ensure correct usage. When inserting this disc in the PlayStation 3 s

N600 Dual Band WiFi Gigabit Modem Router with Voice -NB16WV 02. Quick Start Guide. Power Supply Unit. Ethernet Cable (RJ-45). Phone Cable (RJ-11). Wireless Security Card. Warranty Card. If any of these items are missing or damaged, please contact NetComm Wireless Support immediately by visiting the NetComm

The information contained herein is proprietary to NetComm Wireless Limited. No part of this document may be translated, transcribed, reproduced, in any form, or by any means without prior written consent of NetComm Wireless Limited.

Key words: Korean language teaching, Indian contexts, problems faced in learning Korean 1. Introduction The much awaited Korean Language course began in September 2012 in Manipur University. It is now a well-known fact that the people of Manipur, especially the youth, are very drawn to Korea and its culture. It is due to this emulation towards .