SoftTouch Navigation System 250-7614 2011-2013 Ford Edge .

3y ago
38 Views
2 Downloads
984.74 KB
16 Pages
Last View : 2d ago
Last Download : 2m ago
Upload by : Elisha Lemon
Transcription

SoftTouch Navigation System250-7614 2011-2013 Ford Edge Installation InstructionsGeneral Applicability:Ford - 2011-2013 Explorer, 2011-2013 Taurus, 2011-2013 Flex, 2013 Fusion, 2013 F-150/250/350Lincoln – 2012-2013 MKZ, MKX, MKS, MKTFor video installation instructions, please visit us online at www.rostra.com.INSTALLATION PERFORMED ON FORD EDGE FOR REFERENCE ONLY!Parts IdentificationVehicle PreparationProgramming Switch SettingsInstallationPage 1Page 2Page 2Page 3Parts nNavigation interface moduleVehicle interface harnessStylusNavigation interface boardLCD IN harness and LCD IN harnessGPS antenna with magnetic baseGPS speakerSpeaker and reverse camera input harnessVHB tapeForm #5417, Rev. A, 03-08-13Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.comPage 1

STOP – Install At Your Own RiskYOU MUST READ THESE WARNINGS AND NOTICE BEFORE PRODUCTHANDLING AND INSTALLATION!PRODUCT AND VEHICLE APPLICATION WARRANTY DISCLAIMERWARNING! The Navigation Electronic Components are sensitive to Electro-StaticDischarge (ESD). DO NOT HANDLE THE NAVIGATION ELECTRONICCOMPONENTS WITHOUT PROPER ESD GROUNDING DURINGINSTALLATION. FAILURE TO USE PROPER ESD PROTECTION WHENHANDLING THE NAVIGATION COMPONENTS WILL VOID THE PRODUCTWARRANTY.WARNING! Installation of this Navigation Electronics product in the vehicle radiohead unit must be performed by a professional technician that is experienced withproper work methods, ESD handling requirements, and knowledgeable of specificprocedures for radio disassembly, Navigation Electronics installation, and reassembly of the vehicle Radio Head Unit as well as proper handling requirements ofall components involved. FAILURE TO FOLLOW PROPER DISASSEMBLY,INSTALLATION, AND REASSEMBLY PROCEDURES AND PROPERCOMPONENT HANDLING REQUIREMENTS MAY RESULT INIRREVERSIBLE DAMAGE TO THE VEHICLE RADIO HEAD UNIT AND/ORTHE NAVIGATION ELECTRONICS AND WILL VOID THE PRODUCTWARRANTY!WARRANTY DISCLAIMER NOTICE! Radio removal, disassembly, installationof Navigation Electronics, and Radio re-assembly/re-installation is theresponsibility of the installer, not Rostra Precision Controls, Inc. It is recommendedthat you contract a professional installer that is experienced with proper workmethods involving electronics and knowledgeable of specific procedures for radiodisassembly, Navigation Electronics installation, and re-assembly/re-installation ofthe Radio Head Unit in the vehicle. INSTALLATION DAMAGE TO THEVEHICLE RADIO HEAD UNIT IS NOT THE RESPONSIBILITY OF ROSTRAPRECISION CONTROLS, INC. AND IS EXPRESSLY NOT COVERED UNDERTHE PRODUCT WARRANTY.Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.comPage 2

WARNINGTo avoid dangerous distractions that may lead to an accident, the driver should never operatethe system while the vehicle is in motion. Before installing this product, the seller shouldinform the end-user of proper use and compliance with the proper instructions and all state andfederal laws.Vehicle PreparationBefore beginning your installation, familiarize yourself with the installation instructions and theSoftTouch Navigation system components.To ensure your safety, (A) apply the emergency brake and (B) read this entire manual beforebeginning.CAUTION: It is advisable to disconnect the negative battery cable for 3 minutes beforebeginning installation, to avoid unintended air bag deployment. Note and record any anti-theftradio codes prior to disconnecting.Default Programming Switch (Dip Switch) SettingsDefault Programming Switch Settings1 – Off2 – Off3 – On4 – Off5 – OnFactory or Aftermarket Camera SettingsTo use an aftermarket camera – Place switch #1 in OFF position.To use the vehicle’s factory camera – Place switch #1 in ON position.Visit www.rostra.com to view all compatible backup cameras!6 – OnRostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.com7 – Off8 – OnPage 3

InstallationUsing even pressure, gently remove the trim stripsrunning from the center console to the dashboard bylifting them away.Remove the four screws from both sides of the trimsurrounding the vehicle’s shift lever.Remove the four screws attaching the factory radiotrim to the dashboard.Decouple the clips attaching the radio trim to the shiftlever trim.Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.comPage 4

Remove the radio trim from the vehicle making sure tounplug the wire harness for the air conditioningcontrols.Remove the four screws securing the factory touchscreen to the dashboard. Place them somewherewhere they will not be lost.Gently turn the touch screen unit towards the driver’sside of the vehicle to easily access the factory wiringharnesses.Gently remove these harnesses (Note: the largefactory harness includes a locking retainer clip.)Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.comPage 5

Gently lift the touch screen unit from the vehicle’sdashboard.Remove the four screws from the backside of thetouch screen unit.Remove the four screws surrounding the outside of thetouch screen unit.Gently lift open the casing of the touch screen unit togain access to the ribbon cables on the interior.Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.comPage 6

Using a small pry tool, gently release the large ribboncable tab.Gently remove the small ribbon cable from the boardas well.Remove the four screws securing the touch screeninterface board to the touch screen unit this exposes the interface plug underneath.Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.comPage 7

Lift away the backside casing and route the LCD-INand TP-IN harnesses through the opening.Reapply the interface board making sure to properlyalign the factory connector on its backside to the touchscreen.Connect the ribbon cables from the navigation interface board to the touch screen interface board and re-securethe four mounting screws.Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.comPage 8

Connect the ribbon cables from the touch screen unitto the newly installed navigation interface board.Replace the touch screen unit making sure no ribboncables are pinched during the process.Secure the touch screen unit to its carriage frame byreplacing the four previously removed screws.Remove the four screws securing the factory CDplayer to the dashboard and gently lift it out of theway.Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.comPage 9

Remove the protective layer from the adhesive backing Mount the GPS antenna to the top-rear of the vehicleon the GPS speaker and attach it to the interiorallowing it to attach using its magnetic base.dashboard frame behind the touch screen.Route the GPS antenna extensions harness to the frontof the vehicle above the headliner, down thepassenger-side A-pillar, and behind the glovebox.Connect the TP-IN and LCD-IN harness to the PINKand YELLOW ports on the navigation control module.Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.comPage 10

Connect the power harness from the vehicle interfaceharness to the navigation control module.Connect the speaker interface harness to thenavigation control module.Find the threaded end of the GPS antenna and connectit to the navigation control module.Connect the vehicle interface harness to the factorywiring harness on the car. (Note: the large factoryharness includes a locking retainer clip.)Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.comPage 11

Apply the included VHB tape to the bottom side of thenavigation control module.Attach the navigation control module to the dashboardin the open cavity below the factory CD player.Attach the vehicle interface harness to the backside ofthe touch screen unit.Connect the TP-IN and LCD-IN harnesses previouslyrouted through the backside of the touch screen unit’scasing to the TP-IN and LCD-IN harnesses from thenavigation interface module.Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.comPage 12

Replace the touch screen unit and factory CD player.Make sure no wires are pinched in the process.If indoors, start the vehicle and move it outside so that theGPS antenna has a clear view of the sky. Press themute/call decline button to switch from the factoryinterface to the iGo Navigation interface.Reassembly1. Reinstall all trim pieces taking special care to ensure harnesses and wiring connections are properly secured.2. Make sure no harnesses are bent or pinched by trim pieces.3. Reconnect all disconnected bulbs and check for function.Installation Tips Confirm proper cable extension connector orientation and always verify proper ends are routed in correct direction.It is a good idea to dry-fit all pieces in this kit before permanently attaching them to ensure proper orientation andoperation before beginning installation for familiarization with components.Always treat any metal exposed during installation with a rust preventative compound to prevent system failure due torust and/or corrosion.Always seal any holes drilled with the provided sealing putty to prevent water infiltration through unprotected areas.Confirm integrity of mechanical and electrical connections before moving to next installation sequence.Installation NotesRostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.comPage 13

Installation NotesRostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.comPage 14

Installation NotesRostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.comPage 15

Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.comPage 16

250-7614 2011-2013 Ford Edge Installation Instructions General Applicability: Ford - 2011-2013 Explorer, 2011-2013 Taurus, 2011-2013 Flex, 2013 Fusion, 2013 F-150/250/350 Lincoln – 2012-2013 MKZ, MKX, MKS, MKT For video installation instructions, please visit us online at www.rostra.com. INSTALLATION PERFORMED ON FORD EDGE FOR REFERENCE ONLY! Parts Identification Page 1 Vehicle Preparation .

Related Documents:

Navigation Systems 13.1 Introduction 13.2 Coordinate Frames 13.3 Categories of Navigation 13.4 Dead Reckoning 13.5 Radio Navigation 13.6 Celestial Navigation 13.7 Map-Matching Navigation 13.8 Navigation Software 13.9 Design Trade-Offs 13.1 Introduction Navigation is the determination of the position and velocity of the mass center of a moving .

MPM-.25-250 1/4. 0.50 250 0.08 MPM-.375-250 3/8 . 0.72 250 0.17 MPM-.5-250 1/2. 0.88 250 0.24 MPM-.75-250 3/4 . 1.16 250 0.36 MPM-1-250 1. 1.44 250 0.49. Parts No. I.D. Inches O.D. Inches Max W.P. PSI Approx. Wt. Per. Ft. Lbs. 1/4” - 1” 25ft multiples & 700ft reels 1-1/4” 25ft multiples &

Buick LaCrosse Navigation System - 2012 Black plate (4,1) 4 Infotainment System Overview Read this manual thoroughly to become familiar with how the navigation system operates. The navigation system includes navigation and audio functions. Keeping your eyes on the road and your mind on the drive is important for safe driving. The navigation

Honda CRF 250 / 4501 CRF 250 / 450 CRF 250 / 450 - - - Husqvarna All TC / FC1 All TC / FC All TC / FC All TE / FE1 All TE / FE All TE / FE Kawasaki KX 250 / 450 F1 KX 250 / 450 F KX 250 / 450 F - - - KTM All SX 1All SX All SX All EXC All EXC All EXC Sherco - - - All SE1 All SE1 All SE Suzuki RMZ 250 / 4501 RMZ 250 / 450 RMZ 250 / 450 - - -

Killexams.com provides free download of latest 250-412 exam questions and answers with valid braindumps in PDF file. These questions helps to get guaranteed 100% marks. Keywords: 250-412 exam dumps, 250-412 exam questions, 250-412 braindumps, 250-412 actual questions, 250-412 real questions, 250-412 practice tests Created Date: 2/14/2022 9:56:52 PM

Chevrolet Equinox and GMC Terrain Navigation System (Include Mex) - 2012 Black plate (4,1) 4 Infotainment System Overview Read this manual thoroughly to become familiar with how the navigation system operates. The navigation system includes navigation and audio functions. Keeping your eyes on the road and your mind on the drive is important for .

Navigation System on page 2-2. J. ROUTE Key. See “Hard Keys” under Using the Navigation System on page 2-2. K. MENU Key. See “Hard Keys” under Using the Navigation System on page 2-2. L. TILT Key. See “Hard Keys” under Using the Navigation System on page 2-2. Getting Started Before you begi

API 526 provides effective discharge areas for a range of sizes in terms of letter designations, “D” through “T.” 3.19 Flutter Fluttering is where the PRV is open but the dynamics of the system cause abnormal, rapid reciprocating motion of the moveable parts of the PRV. During the fluttering, the disk does not contact the seat but reciprocates at the frequency of the flutter. 3.19 .