GSM/GPRS/GPS Vehicle Tracker GPS103-A/GPS103-B User Manual
1GSM/GPRS/GPS Vehicle TrackerGPS103-A/GPS103-B User ManualPrefaceThank you for purchasing the tracker. This manual shows how to operate thedevice smoothly and correctly. Make sure to read this manual carefully beforeusing this product. Please note that specification and information are subject tochanges without prior notice in this manual.Any change will be integrated in the latest release. The manufacturer assumesno responsibility for any errors or omissions in this document.
2Contents1. Function Introduction.42. Applications .43. Hardware Description .44. Accessories Name .65．Specifications .76. Operating Instructions.86.1 Terminal Installation .86.4 GSM/GPS LED Indicator .106.5 Initialization .106.6 Change Password .106.7 Authorization.116.8 Single Locating .126.9 Successive Locating Automatically .126.10 Get location in real street/address name .136.11 Monitor.136.12 Modes switch between “track” & “monitor” .136.13. Alarms .146.13.1 Low battery alarm .146.13.2 Power off alarm.146.13.3 SOS.146.13.5 Movement alarm .156.13.6 Overspeed alarm.156.14 Cut off the Oil and Power System .166.15 Resume the Oil and Power System .166.16 Arm.166.17 Disarm .176.18 Function of Remote Control (Option, for model B ONLY) .186.19. Alarms under Arm State .186.19.1 door alarm .186.19.2 Sensor alarm.186.19.3 ACC alarm .196.20. Silent Mode .196.21. No GSM Network Alarm .206.22 Check the Vehicle State. .206.23 Tracker’s Hardware Resetting .216.24 IMEI Checking.216.25 Time Setting .216.26 GPRS Setting .216.27 Setting up APN .226.28 GPRS User Name and password Setup .226.29 IP and Port Setup.23
36.30. Modes Switch between “SMS” and “GPRS” .236.31 User manual of web based and PC installation monitor software .237． Cautions.238． Faults & the Solutions.24
41. Function Introduction1.1 This tracker is a new product based on the GSM / GPRS network and GPSsatellite positioning system, which set multiple functions of security, positioning,monitoring surveillance, emergency alarms and tracking in its entirety. It cantrack and monitor remote target by SMS or internet.1.2 Features1.2.1 Support both GPS / GSM station positioning mission(GPRS/Internet instructions in CD enclosed）1.2.3 Support GPRS on-line and GPRS re-connected automatically ifGPRS drops1.2.4 Support SMS / GPRS dual-mode switching1.2.5 Support configuration by remote terminal.1.2.6 Support for point-to-point, point to group, group-to-groupmonitoring.1.2.7 Set multiple functions of security, positioning, monitoring surveillance,emergency alarms and tracking in its entirety.2. ApplicationsUsed widely for vehicle and other moving objects tracking.3. Hardware Description
5①. GSM Antenna jack⑥. Sensor jack②. SIM card slot⑦. External Connection jack③. SIM card slot Pop-up switch⑧. Power/GSM/GPS LED indicator④. Monitor jack⑨. Backup battery switch⑤. GPS Antenna jack⑩. Remote control receiver antenna（Option, For model B only）
64. Accessories NameNO.PHOTOESNAMENOTE1GPS Antenna3 meters2GSM Antenna3 meters3Microphone1.5 metersHarness410PIN12V/40A to 24V/40A5Relayaccording to vehiclemodelOption for both model A6Shake sensorand BOption for model B7SirenONLYOption for model B8Remote controlONLY
Mhz or 900/1800/1900MhzGSM/GPRSSimcom900BModuleGPS ModuleGPS SensitivityGPS AccuracySIRF3 chip-159dBm5mCold statusGPS Start timeWarm statusHot statusVoltage of car45s35s1s12 V -24Vpower systemBackup batteryChargeable changeable 3.7V 800mAh Li-ion batteryStorage Temp.-40 C to 85 COperation Temp.-20 C to 65 CHumidity5%--95% non-condensing
86. Operating Instructions6.1 TERMINAL INSTALLATION6.1.1 Please ask the qualified engineers to install it.6.1.2 Do not install it in a environment which is more than GSM performance,And please pay attention to fix the antennas in a exactly position with goodsignals.6.1.3 Pay attention to make installation location preventing water and dust.6.1.4 Find the 10 PIN harness and insert it into the corresponding holes of theproducts, and connect the wires with the original car circuit showing below:Wiring diagram6.1.5 Note: The orange wire can be connected to the original car alarm horn; itcan also be connected to the siren you buy with the tracker. (Siren isOption)
96.1.6 Knowing about the type of the door trigger is positive or negative trigger.Please connect the green wire to the door control circuit if it is positive, andconnect blue wire if it is negative.6.1.7 Please install the Reset button and SOS button on the place driver cantouch.6.1.8 Insert the shake sensor plug into the sensor jack. (Shake sensor is Option)6.1.9 Insert the external monitor Microphone into the monitor jack.6.1.10 Connected the GPS and GSM antenna to the right jack, and find aappropriate place and fix the antennas to make sure it receive signals verywell.6.2 SIM CARD INSTALLATIONS6.2.1 Use a tweezers or a sharp thing to touch the SIM CARD popup switch, theSIM CARD slot will pop up, take out the SIM card slot and put SIM cardin it. And then put the SIM card slot back to its original position afterconfirm the SIM card in the right place.6.2.2 Please make sure that the SIM card is able to execute the function ofincoming calls display, no calls can be diverted and the PIN code islocked. The SMS format must be TXT format, and can’t recognize thePDU format.6.3 Turn on the Tracker Device.6.3.1 Connect the positive and negative wire, red and black ones, with 12V or24V car power system, wait for 1 minute after connecting power to waittracker works normal, and then turn on the backup battery switch.
106.4 GSM/GPS LED Indicator6.4.1 Red LED indicator on: No GSM network signals.6.4.2 Red LED indicator flash fast (one time each second): GSM Networksignal is normally, and tracker works under GSM mode.6.4.3 Red LED indicator flashes slowly (one time each three second): Trackerworks under GPRS mode.6.4.4 Green LED indicator on: GPS signal is normal.6.4.5 Green LED indicator off: No GPS signals.6.5 InitializationSend SMS “begin password” to the unit, it will reply “begin OK” and initializeall the settings to default factory settings.（default password: 123456）For example: send SMS “begin123456”, it will reply “begin ok”. (Noquotation marks” ” when sending all the SMS)6.6 Change Password6.6.1 Send SMS “ password old password space new password” to the unit tochange the password.For example: send SMS “password123456 888888” to the unit. If succeeded,“password OK” will reply to your cell phone from the device tracker.6.6.2 Be sure to keep the new password in mind, you have to upload the
11software to restore the original setting in case of losing the new password.6.63 Attention: Make sure the new password is in 6 digits, or else the trackercannot recognize the password.6.6.4 The “ ” in the command, please don’t type “ ”, space means pressthe space keyboard on your cell phone.6.7 AuthorizationThere are 5 numbers to be allowed to authorize in the tracker at most.6.7.1 Call and track the tracker device for 10 times from cell phone in success, itwill make the cell phone number as the authorized number automatically, andreply “add master ok”.6.7.2 Authorization: Send SMS “admin password space cell phone number”to set up an authorized number, the other authorized numbers should be set bythe first authorized number, if the number is successfully authorized, the unitwill reply” admin OK” by SMS.6.7.3 Delete authorization: Send SMS” noadmin password space authorizednumber” to delete the authorized number.6.7.4 If you want to track the target tracker device when it enters into anothercountry, you must add the country code before the cell phone number, forexample, send SMS” admin123456 008613322221111” to the device.Note: 13322221111 will be set up as the authorized number.
126.8 Single Locating6.8.1 Any number call the tracker device, it will reply a SMS including theposition of latitude and longitude if don’t set up the authorized number. Ifauthorized number has set successfully, the device won’t reply SMS includingthe positioning of latitude and longitude when the unauthorized number dials upit.6.8.2 Dialing the tracker device from the authorized number, it will hang upyour calling and respond to a real-time latitude and longitude information asfollowing:6.8.3 When GPS signals lost, The SMS including the position of latitude andlongitude is the positioning that the tracker received GPS signals at last. It isdifferent with its exact current location, so you should pay attention to the timeincluded in the SMS you got.6.9 Successive Locating Automatically6.9.1 Send SMS command “fix030s005n password” to the tracker device, itwill report the Geo-info at 30s intervals for 5 times. (s:second, m:minute,
13h:hour). This command set must be in 3 digits and the maximum value is 255.6.9.2 Send SMS “fix030s***n password” to the tracker device, it will reply theGeo-info continuously at 30 seconds intervals.6.9.3 Cancellation: Send SMS “nofix password” to the tracker device to cancelthe “auto track”.Note: the interval must not less than 20s.6.10 Get location in real street/address name6.10.1 You must set up the APN of your local GSM network for the SIM card intracker first before using this function, if there is user name and password forGPRS login, Please refer to 6.27 and 6.28 to configure the APN, user name andpassword for GPRS login.6.10.2 After configure the APN, send address password to device, it will replySMS including real street/address name. For example: No.113, Nantou Guankou2nd Rd. Nanshan district, Shenzhen, Guangdong, china.6.11 MonitorIn this mode, the user can dial up the tracker device to monitor the voice (pleaserefer to 6.12 for instruction).6.12 Modes switch between “track” & “monitor”
146.12.1 The default mode is “track” (track mode).6.12.2 Send SMS command "monitor password" to tracker device of vehicleterminal, it will reply "monitor ok!" and switch to “monitor” mode.6.12. 3 Send SMS command "tracker password" to tracker device of vehicleterminal, It will return "tracker ok!" and restore to “track” mode.6.13. Alarms6.13.1 LOW BATTERY ALARMWhen the voltage of the tracker device is near 3.6V, it will send SMS “lowbattery lat./long information to the authorized number in 3 minutes interval.6.13.2 POWER OFF ALARMWhen the power be cut off or the voltage is 0V, the tracker device will sendSMS “power alarm lat./long. to the authorized number in 3 minutes interval.6.13.3 SOSLong Press the SOS button for 3 seconds, the tracker device will send SMS“help me! lat./long. to all the authorized numbers in 3 minutes interval. It willstop sending such a SMS when any authorized number reply SMS “help me!” tothe tracker.6.13.4 Geo-fenceSet up a geo-fence for the tracker device to restrict its movements within adistrict. The unit will send SMS to the authorized numbers when it goes out ofthis district.
15Set up: When the unit stays immobile in a place for 3-10 minutes, the user cansend SMS “stockade password space latitude,longitude;latitude,longitude” tounit to set the restricted district. In case of breach, it will send SMS“stockade! geo-info” to the authorized numbers.Remark: The first latitude & longitude is coordinate of the top left corner of theGeo-fence, while the second latitude & longitude is the coordinate of the bottomright corner, it will alarm in 3 minutes interval.Cancel: Send SMS “nostockade password” to deactivate this function.6.13.5 MOVEMENT ALARMSet up: when the unit stays immobile in a place for 3-10 minutes, the user cansend SMS “move password” to the tracker device. It will reply “move OK”. Incase of such a movement (the default distance is 200m), it will send SMS“Move” along with a Geo-info to the authorized numbers, it will alarm in 3minute interval.Cancel: Send SMS “nomove password” to deactivate the movement alarm.6.13.6 OVERSPEED ALARMSet up: Send SMS “speed password space 080” to the unit(suppose the speedis 80km/h),and it will reply “speed OK!”.When the target moves exceeding80km/h.the unit will send SMS “speed 080! Geo-info” to the authorized
16numbers. It will alarm one time in 3m interval.Cancel: Send SMS “nospeed password” to deactivate the overspeed alarm.Remark: It is recommended that the speed alarm is set at not less than30km/h.For below that rate; it may cause the excursion of the GPS signalinfluenced by clouds etc.6.14 Cut off the Oil and Power SystemSend SMS command “stop password” to the tracker device, it will reply“Stop engine Succeed” to your cell phone from the tracker device, and stop yourcar engine as well, at the same time. It will remain the immobile state untilreceiving the next SMS command of resuming the oil and power once receivingSMS command to cut off the oil and power system.6.15 Resume the Oil and Power SystemSend SMS command “resume password” to the unit, It will reply “Resumeengine Succeed” and resume your car engine as well, at the same time. Itwill remain this state until receiving the next SMS command to cut off the oiland power system once receiving SMS command to resume the oil and gassystem.6.16 Arm
176.16.1 Set up arm by SMSSend SMS command “arm password” to the tracker device in the vehicle. Itwill reply “Tracker is activated” in both armed and disarmed state, and the SMScommand will make the tracker device enter into armed state if the unitcurrently disarmed.User must stop the engine, (that is ACC is lower voltage).Sending SMS“arm password” when close the door and left. You will set up arm status fail ifthe engine is turned on (the ACC is high voltage), it will reply “set up fail! plsturn off ACC”6.16.2 Set up arm by remote control (Option, for model B ONLY)Press “A” button on the remote control, the car enters into armed stateand the siren will alarm one time, no SMS reply.6.17 Disarm6.17.1 Disarm by SMSSend SMS command "disarm password" to the tracker device in the vehicle, Itwill reply “Tracker is deactivated” in both armed and disarmed state, and theSMS command will make the tracker device enter into disarmed state if the unitcurrently armed.It won’t alarm if the door is open and sensor is vibrated and the engine is startedwhen deactivated this arm function.6.17.2 Disarm by remote control (Option, for model B ONLY)
18Press “B” button on the remote control, the car enters into disarm state, and thesiren will alarm two times, no SMS reply.6.18 Function of Remote Control (Option, for model B ONLY)ARMPress “A” button for 0.5 second, the siren will alarm one time.DISARMPress “B” button for .5 second, the siren will alarm two times.Silent modePress “A B” together for 0.5 second when it is in disarm state,the siren will alarm three times.Quit silent mode Press “A B” together for 0.5 second again when it is indisarm state, the siren will alarm four times.DeterrenceLong press “A” button for 3 seconds, siren will alarm for 10seconds, press “A” or “B” button to quit6.19. Alarms under Arm State6.19.1 DOOR ALARMThe unit will send SMS “Door alarm lat/long” to the authorized number in 3minutes interval when the door of the car opens in arm status; Siren will alarmfor 30 seconds in every 1 minute interval, send “disarm password” to stop it.6.19.2 SENSOR ALARMThe unit will send SMS “Sensor alarm lat/long” to the authorized number in 3minutes interval when the sensor is triggered in arm status; Siren will alarm for30 seconds in every 1 minute interval, send “disarm password” to stop it.
196.19.3ACC ALARMThe unit will send SMS “ACC alarm lat/long” to the authorized number in 3minute interval when the engine of the car is turned on, that is the key is rotatedto ACC.ON position to start the car in arm state; Siren will alarm for 30 secondsin every 1 minute interval, send “disarm password” to stop it.6.20. Silent Mode6.20.1 Set up silent mode by SMSSend SMS “silent password” to tracker device, it will reply “silent ok!”.Itmeans tracker device enters into silent mode, siren won’t alarm after alarmis triggered, but tracker will send alarm SMS to authorized number.Quit silent mode send SMS “loud password” to tracker device, it will reply“loud ok!”. It means tracker quit from silent mode, siren will alarm afteralarm is triggered, and it will also send SMS alarm to
6.9.2 Send SMS “fix030s***n password” to the tracker device, it will reply the Geo-info continuously at 30 seconds intervals. 6.9.3 Cancellation: Send SMS “nofix password” to the tracker device to cancel the “auto track”. Note: the interval must not less than 20s. 6.10 Get location in real street/address name
GSM/GPRS/GNSS HAT User Manual 1 / 32 GSM/GPRS/GNSS HAT User Manual OVERVIEW This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Blueto
Vehicle GPS tracker (GPS GSM SMS/GPRS) TK110 User Manual (Version 3.6) Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information ar
GPS Vehicle tracker (GPS GSM SMS/GPRS) User Manual (Version 1.0) . 6.1 Set configuration of GT06 For example: When the device goes to Indonesia, and the customer put the sim card from the Indosat operator in it. . book empty!” 6.4 Check the parameter setting
1.6 Support map viewing on mobile phone screen, get absolute address by SMS, GPRS real time tracking on web based server. 1.7 Built-in high sensitivity GPS and GSM antenna to make it can be used alone without installation, convenient and quick. 1.8 Support for external GSM antenna, GPS antenna, and external power supply for the tracker to be
GSM/GPRS/GPS Vehicle Tracker TK103A/B User Manual Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The .
2. SETTING GPS TRACKER (GT06, GT06N ,TR06, GT07) Setelah kartu GSM dipasang pada GPS Tracker, lalu nyalakan GPS Tracker dg menggeser tombol switch ON/OFF disamping slot kartu GSM. Gunakan handphone anda untuk mengirimkan sms berisi perintah setting dikirim ke nomer gsm
2.1 Circuit-Switched Data Transmission over GSM 63 2.2 Packet-Switched Data Transmission over GPRS 64 2.3 The GPRS Air Interface 66 2.3.1 GPRS vs. GSM Timeslot Usage on the Air Interface 66 2.3.2 Mixed GSM/GPRS Timeslot Usage in a Base Station 68 2.3.3 Coding Schemes 68 2.3.4 Enhanced Data
A Professional GSM Alarm System designer and manufacturer! GSM Transformer Alarm System &GSM House Alarm System& GSM Telemetry Units & GSM GPRS Logging System Http://www.GSMalarmsystem.com Sales@KingPigeon.com.cn 1. Brief introduction The GSM Gate Opener RTU5015 is a very simple device which can be used for authorized door access,
