Immobilizer And Smart Key Reset

3y ago
50 Views
4 Downloads
2.36 MB
23 Pages
Last View : 1m ago
Last Download : 2m ago
Upload by : Warren Adams
Transcription

T-SB-0043-14Rev2July 7, 2014Immobilizer and Smart Key ResetServiceCategoryVehicle InteriorSectionTheft Deterrent/Keyless EntryMarketUSAApplicabilityYEAR(S)MODEL(S)1998 – 20164Runner, Avalon,Avalon HV, Camry,Camry HV, Corolla,Corolla BR-Prod, FJCruiser, Highlander,Highlander HV, LandCruiser, MR2 Spyder,Matrix, Prius, PriusC, Prius PHV, PriusV, RAV4, RAV4 EV,Sequoia, Sienna,Solara, Tacoma,Tundra, Venza, YarisADDITIONAL INFORMATIONREVISION NOTICEJuly 23, 2015 Rev2: The applicability has been updated to include 2016 applicable model year vehicles. The Preparation section has been added.July 25, 2014 Rev1: Sections 1, 2, and 3 have been updated.Any previous printed versions of this bulletin should be discarded.SUPERSESSION NOTICEThe information contained in this bulletin supersedes SB No. SS003-01. Applicability has been updated to include 1998 – 2015 applicable model year vehicles.Service Bulletin No. SS003-01 is Obsolete and any printed versions should be discarded. Be sureto review the entire content of this bulletin before proceeding. 2015 Toyota Motor Sales, USAPage 1 of 23

Rev2T-SB-0043-14July 7, 2014Page 2 of 23Immobilizer and Smart Key ResetIntroductionThe Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when allmaster keys are lost. Once the system is reset, all previously registered keys will be erased. Followthe procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.NOTEThere are new security provisions required to obtain a Reset Pass-Code. It is critical that theinstructions for this new process are reviewed BEFORE attempting to get a Pass-Code in thenew system.Warranty InformationOP CODEDESCRIPTIONTIMEOFPT1T2N/ANot Applicable to Warranty––––Required Tools & EquipmentREQUIRED EQUIPMENTTechstream 2.0*Techstream LiteSUPPLIERADEPART NUMBERQTYTS2UNITTSLITEPDLR01* Essential SST.NOTE Only ONE of the Techstream units listed above is required. Software version 10.10.018 or later is required. Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE) at1-800-368-6787. 2015 Toyota Motor Sales, USA1

Rev2T-SB-0043-14July 7, 2014Page 3 of 23Immobilizer and Smart Key ResetService Bulletin Overview1. Review the vehicle application chart in the Technical Information System (TIS) to verify thevehicle is capable of being reset.Refer to the Toyota / Scion Vehicle Support chart located on TIS, under Diagnostics –Immobilizer Reset – Reference Documents.2. Review the new security authorization process and choose the option that best supports yourdealer situation.3. Follow the Techstream and TIS screenshots to obtain the Pass-Code needed to open registrationfor Immobilizer and Smart Key programming.NOTESome early ECM based Immobilizers cannot be reset using Techstream. For these vehicles, dothe following: Identify the vehicle using the Toyota / Scion Vehicle Support noted above. Refer to the most recent PANT bulletin for instructions. 2015 Toyota Motor Sales, USA

Rev2T-SB-0043-14July 7, 2014Page 4 of 23Immobilizer and Smart Key ResetPreparation for 2001 Model Year MR2 and RAV4Before beginning the Key Code Reset function on 2001 Model year MR2 and RAV4 vehicles, it isnecessary to short terminals TC to E1 at the ECM connector, using SST No. 09843–18020.With ECU connectors in place, back–probe and short terminals TC to E1 (pin 17 to pin 5).Figure 1. ECM TERMINALS ON ’01 MR2 & RAV4NOTE With the key ON and the engine OFF, the SRS, Cruise and ABS lights will flash on theinstrument panel when terminals TC to E1 are shorted together correctly. Leave the SST No. 09843–18020 in place for the entire Key Code Reset procedure. 2015 Toyota Motor Sales, USA

Rev2T-SB-0043-14July 7, 2014Page 5 of 23Immobilizer and Smart Key ResetSection 1: Security Authorization for the Reset Pass-CodeAn improved security measure has been implemented in TIS that requires a secondary approval bydealer management each time an Immobilizer or Smart Key Reset request is submitted. Pleasereview the following flow chart and become familiar with the options outlined prior to attemptinga vehicle reset.Figure 2. Immobilizer Reset ProcessREQUEST ORStartLogin to TIS and Navigate to TIS Diagnostics Immobilizer ResetRe-enter TIS password intoImmobilizer Reset portletComplete Immobilizer Resetform and acknowledge PositiveIdentification PolicyAPPROVING MANAGERConfirm Approving ManagersLogin to TIS and Access ApprovalRequest Inbox MessageLogin to TIS and AccessApproved Inbox MessageConfirm Request details,acknowledge Request ApprovalPolicy, and Approve RequestConfirm detail and select“Immobilizer Reset” linkRe-enter TIS password intoImmobilizer Reset portletComplete Remaining TIS andTe chstream Smart Code Resetprocedures as usualREQUEST ORAPPROVING MANAGEREnd 2015 Toyota Motor Sales, USASteps introducedJuly 5, 2014

Rev2T-SB-0043-14July 7, 2014Page 6 of 23Immobilizer and Smart Key ResetSection 1: Security Authorization for the Reset Pass-Code (Continued)Key Points: The Reset request can be submitted from the Techstream in the vehicle, or on TIS before thevehicle is available. A single management approval can be used multiple times for the same VIN as needed until thevehicle repair is completed. Each Reset attempt for the same VIN will generate a new Seed Number and a uniquePass-Code. The request and approval hand-off between technician and management is done on the TIShome page inbox accessed at each individual’s location (Techstream, office, etc.).Main Steps:1. Obtain AuthorizationA. Technician Reset Approval RequestB. Manager Access TIS In-Box Message and Approve2. Perform Reset with TechstreamA. Access Approval In-Box MessageB. Perform Reset at VehicleVariations:1. Pre-approval before vehicle is accessed (as per above Main Steps)2. Request and receive approval from Techstream after entering the reset utility3. Repeated reset attempts with Techstream by accessing the single approval fileApproving Managers:Once the Pass-Code Request form has been completed an approval request will be sent to allapproving managers. Dealership personnel with the following job titles in “Staffmaster” are grantedPass-Code approval capability.Dealer Principal, General Manager, Service Manager, Service Director, Service/Parts Director, PartsManager, Parts Director, Customer Relations Manager, Customer Satisfaction Manager, Shop Foreman,Diagnostic Specialist, Team Leader. Each dealer must have at least 2 enrolled managers in order to accessany Pass-Codes. 2015 Toyota Motor Sales, USA

Rev2T-SB-0043-14July 7, 2014Page 7 of 23Immobilizer and Smart Key ResetSection 1: Security Authorization for the Reset Pass-Code (Continued)NOTEOnce a Reset is completed, it may be necessary to enter an “Immobilizer Key Registration” or a“Smart Key Code Registration” utility to program the new keys. Early Immobilizer systems may beready to accept keys immediately after the Reset if the security light flashes a 2-digit code (suchas 21 or 22). Refer to the applicable Repair Manual for details.Please review the Techstream and TIS screenshots in this bulletin to become familiar with thenew management authorization process flow.Section 2: Reset Approval Request (TIS Pre-Approval)1. Open TIS and enter the Diagnostics and Immobilizer Reset tabs. Login using your password.Figure 3. 2015 Toyota Motor Sales, USA

Rev2T-SB-0043-14July 7, 2014Page 8 of 23Immobilizer and Smart Key ResetSection 2: Reset Approval Request (TIS Pre-Approval) (Continued)2. Enter the information requested, check all 4 boxes below Positive Identification Policy, thenclick Next.Figure 4.3. A minimum of two managers are required to be selected. Once two or more managers areselected, click Submit to continue. Each request is required to be approved by one manager.Once manager approval is received, continue to Section 5, “Receipt of Pass-Code.”Figure 5. 2015 Toyota Motor Sales, USA

Rev2T-SB-0043-14July 7, 2014Immobilizer and Smart Key ResetSection 3: Techstream Reset Utility (With Request)1. Connect Techstream to the vehicle.Figure 6. 2015 Toyota Motor Sales, USAPage 9 of 23

Rev2T-SB-0043-14July 7, 2014Page 10 of 23Immobilizer and Smart Key ResetSection 3: Techstream Reset Utility (With Request) (Continued)2. Choose the appropriate vehicle model and year if the ignition cannot be turned on and theinformation does not automatically populate.Figure 7.3. Choose the Immobilizer or Smart Key system as needed.Figure 8. 2015 Toyota Motor Sales, USA

Rev2T-SB-0043-14July 7, 2014Immobilizer and Smart Key ResetSection 3: Techstream Reset Utility (With Request) (Continued)4. Choose the Immobilizer or Smart Code Reset utility.Figure 9.5. Enter the VIN if prompted.Figure 10. 2015 Toyota Motor Sales, USAPage 11 of 23

Rev2T-SB-0043-14July 7, 2014Immobilizer and Smart Key ResetSection 3: Techstream Reset Utility (With Request) (Continued)6. Techstream will generate a Seed Number. Click Get Pass-Code.Figure 11.7. Click Send to connect to TIS.Figure 12. 2015 Toyota Motor Sales, USAPage 12 of 23

Rev2T-SB-0043-14July 7, 2014Page 13 of 23Immobilizer and Smart Key ResetSection 3: Techstream Reset Utility (With Request) (Continued)NOTE If there is already a management approval file for this VIN, DO NOT follow the next 3 steps toresubmit a request. Open the approval file in your TIS inbox and enter the most recent SeedNumber to get the Pass-Code (as outlined in Section 5, “Receipt of Pass-Code”). Then go toSection 6, “Techstream Reset Utility (Reset Initiated).” For repeated Reset attempts after the approval is completed, follow Section 3, “TechstreamReset Utility (With Request),” and Section 6, “Techstream Reset Utility (Reset Initiated),” usingthe same management approval file.8. When the TIS window opens, enter your password to login.Figure 13. 2015 Toyota Motor Sales, USA

Rev2T-SB-0043-14July 7, 2014Page 14 of 23Immobilizer and Smart Key ResetSection 3: Techstream Reset Utility (With Request) (Continued)9. Fill in the required information and select Next.Figure 14.10. A minimum of two managers are required to be selected. Once two or more managers areselected, click Submit to continue. Each request is required to be approved by one manager.Once manager approval is received, continue to Section 5, “Receipt of Pass-Code.”Figure 15. 2015 Toyota Motor Sales, USA

Rev2T-SB-0043-14July 7, 2014Page 15 of 23Immobilizer and Smart Key ResetSection 4: Manager Approval (TIS)1. Once the request has been submitted, one of the authorized dealer managers will locate thetechnician’s request in their TIS home page inbox.The manager clicks the title to open the Request.Figure 16. 2015 Toyota Motor Sales, USA

Rev2T-SB-0043-14July 7, 2014Page 16 of 23Immobilizer and Smart Key ResetSection 4: Manager Approval (TIS) (Continued)2. The manager checks the 3 boxes under Request Approval Policy, then selects Approve tosend the approval to the technician.Figure 17. 2015 Toyota Motor Sales, USA

Rev2T-SB-0043-14July 7, 2014Page 17 of 23Immobilizer and Smart Key ResetSection 5: Receipt of Pass-Code (TIS)1. Once approved by management, the technician opens his TIS inbox and locates the Resetrequest. The technician clicks the title to open the Approval.Figure 18.NOTE It is recommended to retrieve the Pass-Code from the Techstream connected to the vehicleas the Seed Number and Pass-Code work together. Once approved by management, multiple resets can be performed for a single VIN.Each attempt will create a new Seed Number and resultant Pass-Code. 2015 Toyota Motor Sales, USA

Rev2T-SB-0043-14July 7, 2014Page 18 of 23Immobilizer and Smart Key ResetSection 5: Receipt of Pass-Code (TIS) (Continued)2. Once opened, the technician clicks the Immobilizer Reset link to continue.Figure 19.3. At this point, it is necessary for the technician to re-enter their password to login again.Figure 20. 2015 Toyota Motor Sales, USA

Rev2T-SB-0043-14July 7, 2014Page 19 of 23Immobilizer and Smart Key ResetSection 5: Receipt of Pass-Code (TIS) (Continued)4. The technician must enter the Techstream software version and paste in the Seed Numberfrom Techstream, then click Next.Figure 21. 2015 Toyota Motor Sales, USA

Rev2T-SB-0043-14July 7, 2014Page 20 of 23Immobilizer and Smart Key ResetSection 5: Receipt of Pass-Code (TIS) (Continued)5. The Pass-Code will then be provided as shown. Continue to Section 6, “Techstream Reset Utility(Reset Initiated),” for instructions on entering the Pass-Code to initiate the Reset.Figure 22. 2015 Toyota Motor Sales, USA

Rev2T-SB-0043-14July 7, 2014Page 21 of 23Immobilizer and Smart Key ResetSection 6: Techstream Reset Utility (Reset Initiated)The Reset can be initiated once the management approval reply is available in the TIS home pageinbox. With this approval file, multiple Seed Numbers can be used for as many attempts as neededto repair the vehicle.NOTEIf you have received the file from management in your TIS inbox that shows the approval statusfor the given VIN, do NOT resubmit for another approval for this vehicle. It will not be necessary.Continue to open the approval file and enter a new Seed Number to get the unique Pass-Codefor each attempt.1. After retrieving the Pass-Code from the manager approval process in Section 4 (“ManagerApproval”) and Section 5 (“Receipt of Pass-Code”), enter the Pass-Code in Techstream andclick Next.Figure 23. 2015 Toyota Motor Sales, USA

Rev2T-SB-0043-14July 7, 2014Immobilizer and Smart Key ResetSection 6: Techstream Reset Utility (Reset Initiated) (Continued)2. Click Yes to start the process.Figure 24.Figure 25. 2015 Toyota Motor Sales, USAPage 22 of 23

Rev2T-SB-0043-14July 7, 2014Page 23 of 23Immobilizer and Smart Key ResetSection 6: Techstream Reset Utility (Reset Initiated) (Continued)3. Once completed, it may be necessary to enter either the Immobilizer Key Registration or SmartCode Registration utility to program keys.Figure 26.NOTESome early Immobilizer systems go directly into programming mode. This can be confirmedby the security light blinking a 2-digit code. Refer to the applicable Repair Manual for details. 2015 Toyota Motor Sales, USA

as 21 or 22). Refer to the applicable Repair Manual for details. Please review the Techstream and TIS screenshots in this bulletin to become familiar with the new management authorization process flow. Section 2: Reset Approval Request (TIS Pre-Approval) 1. Open TIS and enter the Diagnostics and Immobilizer Reset tabs. Login using your .

Related Documents:

From year 1995 in Audi-VW (VAG) cars is used engine immobilizer. The VAG group immobilizer system consists of an immobilizer ECU which controls the recognition of keys and the Engine Management ECU system. Immobilizer is activat

Ignition Key Ignition Fuel The engine immobilizer system is designed to prevent the vehicle from being stolen. When the immobilizer system is set, the ECM disables the fuel delivery and ignition systems. Only an authorized key can unset the immobilizer. The Transponder Key ECU assembly stores the codes of authorized ignition keys.

Reset Of SCR Restriction Counter Reset Of SCR Tank Level Sensing SCR Metering Quantity Test o Immobilizer Key Matching by Immobilizer for 2002-2013 vehicles 47 new Actuation type special tests, including: o Engine Coolant Pump Coolant Valve Diesel Particu

Ports LAN Port Reset Button Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the Rocket Prism is powered on. Alternatively, the Rocket Prism may be reset remotely via a Reset button located on the bottom of the Gigabit PoE adapter. LAN The Gigabit Ethernet port is u

Reset Airbag TT Reset Oil Service Light Reset Airbag Other Models Auto Detect BMW (1998 Above) Model Function 3 Series E36 7 Series E38 5 Series E39 Reset Oil Service Light Set Inspection Mileage 3 Series E46 (OBDII) Reset Oil Inspection Light Set Inspection 1 Service Interval

Smart push-button on/off controller with Smart Reset and power-on lockout Datasheet -production data Features Operating voltage 1.6 V to 5.5 V Low standby current of 0.6 µA Adjustable Smart Reset assertion delay time driven by external CSRD Power-up duration determined primarily by push-button press Debounced PB and SR inputs

Back Panel microSD Slot Reset Button USB Type-C Power Port Ethernet Port Power Button Reset Button The Reset Button serves two functions: Restart Press and release the Reset button quickly. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds, until the status LED begins flashing white. Power Button Press to turn the Cloud Key Gen 2 on or off.

ONLINE REGISTRATION: A STEP-BY-STEP GUIDE CONTENTS OVERVIEW 3 HOW TO LOG IN TO ONLINE REGISTRATION 6 PERSONAL DETAILS 7 1. Personal Information (Gender, Marital Status, Mobile Phone No.) 8 2. Social Background (Occupational Background, No. of Dependants). 9 3. Country of Origin/Domicile 9 4. Home Address 10 5. Term Time Address 11 6. Emergency Contact Details 12 7. Disabilities 14 8. Previous .