Atlas Copco Oil-injected Rotary Screw Compressors
Atlas CopcoOil-injected rotary screw compressorsGA 15, GA 18, GA 22, GA 26Instruction book
Atlas CopcoOil-injected rotary screw compressorsGA 15, GA 18, GA 22, GA 26From following serial No. onwards: CAI 782 294Instruction bookOriginal instructionsCopyright noticeAny unauthorized use or copying of the contents or any part thereof is prohibited.This applies in particular to trademarks, model denominations, part numbers anddrawings.This instruction book is valid for CE as well as non-CE labelled machines. It meets therequirements for instructions specified by the applicable European directives asidentified in the Declaration of Conformity.2014 - 11No. 2920 7140 90www.atlascopco.com
Instruction bookTable of contents1Safety precautions.71.1SAFETY ICONS. 71.2GENERAL SAFETY PRECAUTIONS.71.3SAFETY PRECAUTIONS DURING INSTALLATION. 81.4SAFETY PRECAUTIONS DURING OPERATION. 91.5SAFETY PRECAUTIONS DURING MAINTENANCE OR REPAIR. 102Introduction.123Operation.164Electrical system. 215Electrical diagrams.226Air dryer.237Elektronikon controller.247.1ELEKTRONIKON REGULATOR. 247.2CONTROL PANEL. 257.3ICONS USED ON THE DISPLAY.267.4MAIN SCREEN.287.5SHUTDOWN WARNING.297.6SHUTDOWN. 297.7SERVICE WARNING.317.8SCROLLING THROUGH ALL SCREENS.327.9CALLING UP OUTLET AND DEWPOINT TEMPERATURES. 367.10DIGITAL INPUTS.377.11CALLING UP RUNNING HOURS.387.12CALLING UP MOTOR STARTS. 3922920 7140 90
Instruction book7.13CALLING UP MODULE HOURS.397.14CALLING UP LOADING HOURS. 407.15CALLING UP LOAD RELAY. 407.16CALLING UP/RESETTING THE SERVICE TIMER . 417.17SELECTION BETWEEN LOCAL, REMOTE OR LAN CONTROL. 427.18CALLING UP/MODIFYING CAN ADDRESS CONTROL. 427.19CALLING UP/MODIFYING IP, GATEWAY AND SUBNETMASK. 447.20CALLING UP/MODIFYING PRESSURE BAND SETTINGS.457.21MODIFYING THE PRESSURE BAND SELECTION. 477.22CALLING UP/MODIFYING SERVICE TIMER SETTINGS.477.23CALLING UP/MODIFYING THE UNIT OF TEMPERATURE.487.24CALLING UP/MODIFYING UNIT OF PRESSURE. 487.25ACTIVATING AUTOMATIC RESTART AFTER VOLTAGE FAILURE. 487.26SELECTION BETWEEN Y-D OR DOL STARTING. 497.27CALLING UP MODIFYING LOAD DELAY TIME. 497.28CALLING UP MODIFYING MINIMUM STOP TIME. 507.29ACTIVATING PASSWORD PROTECTION. 507.30ACTIVATE LOAD/UNLOAD REMOTE PRESSURE SENSING. 517.31CALLING UP/MODIFYING PROTECTION SETTINGS. 527.32TEST SCREENS. 537.33WEB SERVER. 547.34PROGRAMMABLE SETTINGS.618Elektronikon Graphic controller. 658.1ELEKTRONIKON GRAPHIC CONTROLLER.658.2CONTROL PANEL. 678.3ICONS USED. 688.4MAIN SCREEN.718.5SHUTDOWN WARNING.758.6SHUTDOWN. 762920 7140 903
Instruction book8.7OTHER WARNINGS. 798.8CALLING UP MENUS. 818.9INPUTS MENU.828.10OUTPUTS MENU. 858.11COUNTERS.868.12CONTROL MODE SELECTION.878.13SERVICE MENU. 888.14SETPOINT MENU.928.15EVENT HISTORY MENU.948.16MODIFYING GENERAL SETTINGS.958.17INFO MENU.968.18WEEK TIMER MENU.978.19TEST MENU. 1068.20USER PASSWORD MENU.1078.21WEB SERVER. 1088.22PROGRAMMABLE SETTINGS.1169Installation.1209.1DIMENSION DRAWINGS.1209.2INSTALLATION PROPOSAL. 1219.3ELECTRICAL CONNECTIONS.1239.4PICTOGRAPHS. 12510Operating instructions. 12710.1INITIAL START UP. 12710.2STARTING . 12710.3DURING OPERATION. 12810.4STOPPING .13110.5TAKING OUT OF OPERATION.13242920 7140 90
Instruction book11Maintenance. 13311.1PREVENTIVE MAINTENANCE SCHEDULE.13311.2OIL SPECIFICATIONS.13611.3STORAGE AFTER INSTALLATION. 13711.4SERVICE KITS. 13711.5DISPOSAL OF USED MATERIAL. 13712Adjustments and servicing procedures. 13912.1DRIVE MOTOR .13912.2AIR FILTER.13912.3OIL AND OIL FILTER CHANGE.14012.4OIL SEPARATOR CHANGE. 14112.5COOLERS. 14112.6SAFETY VALVES. 14212.7DRYER MAINTENANCE INSTRUCTIONS.14313Problem solving.14414Technical data.
Atlas Copco Oil-injected rotary screw compressors GA 15, GA 18, GA 22, GA 26 Instruction book. Atlas Copco Oil-injected rotary screw compressors . In multiple compressor systems, manual valves must be installed to isolate each compressor. Non-return valves (check valves) must not be relied upon for isolating pressure systems.
2 Atlas Copco GA 7-37 VSD oil-injected rotary screw compressors Atlas Copco GA 7-37 VSD oil-injected rotary screw compressors 3 A new standard in compressed air performance and efficiency Atlas Copco’s GA 7-37 VSD is a true game changer for your operational environment. It reduces energy consumption by on average 50% and
8 Atlas Copco GA 30 -90/GA 37-110 VSD oil-injected rotary screw compressors Atlas Copco GA 30 -90/GA 37-110 VSD oil-injected rotary screw compressors 9 A step ahead in monitoring and controls The next-generation Elektronikon operating system offers a great variety of control and monitoring features that allow you to increase your compressor’s efficiency and reliability.
Atlas Copco’s service technicians are factory trained and have 24 hours access to the combines global knowledge of Atlas Copco to provide faster troubleshooting. EXPERIENCE With over 140 years of rock drill knowledge, Atlas Copco offers sustainable productivity for your operation. Atlas Copco Mining and Rock Excavation Australia
Mar 03, 2002 · c-1221 atlas copco xas 185 185 cfm @ 125 psi. kubota engine 2018 260 24,174 c-1222 atlas copco xas 185 185 cfm @ 125 psi. kubota engine 2018 766 23,499 c-1240 atlas copco xas 88 175 cfm @ 125 psi. kubota engine 2018 166 16,670 c-1242 atlas copco xas 88 175 cfm @ 125 psi. kubota engine 2018 280 16,670 c-1243 atlas copco xas 88
Common threads on our Drill Pipes 4 DRICONEQ Standard Pipes 5 DRICONEQ eX-Flow 11 DRICONEQ Standard Drill Collar 12 ATLAS COPCO CM (695/760/780) 13 ATLAS COPCO ROC (F6/L6/L8/ SmartRoc/FlexiRoc) 14 ATLAS COPCO T4 (DM30/45/50, T4, RD20) 16 ATLAS COPCO SIMBA Underground 18 ATLAS COPCO TH60 (T2/T3/TH60/ 75E/100A) 19
Atlas Copco is committed to developing a highly efficient screw element for each GA generation. Developed from extensive R&D by dedicated Atlas Copco engineers, the latest version of the patented oil-injected rotary scr
Atlas Copco is committed to developing a highly efficient screw element for each GA generation. Developed from extensive R&D by dedicated Atlas Copco engineers, the latest version of the patented oil-injected rotary screw element provides unrivaled efficiency and reliability. Both the after-cooler with integrated water separator 3
additif alimentaire ainsi que d’une nouvelle utilisation pour un additif alimentaire déjà permis. Les dispositions réglementaires pour les additifs alimentaires figurent à la partie B du titre 16 du RAD. L’article B.16.001 énumère les exigences relatives à l’étiquetage des additifs alimentaires. En particulier, l’article B.16.002 énumère la liste des critères qui doivent .
