MPR2110 - Jensenmobile

MPR2110INSTALLATION/OWNER'S MANUALAM/FM Receiver with Bluetooth and Fixed Face

MPR2110 INSTALLATIONPreparationPlease read entire manual before installation.Before You Start Disconnect negative battery terminal. Consult a qualified technician for instructions. Avoid installing the unit where it would be subject to high temperatures, such as fromdirect sunlight, or where it would be subject to dust, dirt or excessive vibration.Mounting the Head Unit:Typical DIN mountingSingle DINDashboard orInstallation KitStep 1:Insert the mountingsleeve into theinstallation kit ordashboard.Step 2:Bend multiplemounting tabs aroundthe mounting sleeveuntil the mountingsleeve is secure.Step 3:Connect all wiringharnesses and slidethe head unit into themounting sleeve untilit clicks into place.Mounting the Head Unit:ISO mountingUsing the existingbrackets or the bracketssupplied with theinstallation kit, mountthe brackets to the sidesof the head unit with thescrews supplied with thehead unit.2Mounting SleeveSingle DINDashboard or Installation KitMounting SleeveMounting TabsSingle DINDashboard or Installation KitMounting SleeveHead UnitSingle DINDecorativeBezelExistingBracketsNewRadio

MPR2110 INSTALLATIONWiring DiagramFUSEWhen replacing thefuse, make sure newfuse is the correct typeand amperage. Usingan incorrect fuse coulddamage the radio.The unit usesone 10 amp ATM fuselocated besidethe Heat Sink3

MPR2110 OPERATIONControl y Input132Band8Preset 6 / Folder Up14 Display3Mute9Preset 5 / Folder Down15 Mode4Volume Knob10 Preset 4 / Random16 Reset5Automatically Store11 Preset 3 / Repeat17Tune Up6USB Port12 Preset 2 / Intro18Tune Down1171615141312Preset 1 / Play/Pause231Mode10Preset 6 / Folder Up42Volume Up11Mute3Power12AS/PS4Audio13Preset 5 / Folder Down5Tune Up14Preset 4 / Random6Volume Down15Preset 1 / Play / Pause87Band16Bluetooth Talk98Preset 3 / Repeat17Tune Down109Preset 2 / Intro5671147

MPR2110 OPERATIONGeneral OperationPower On/OffChanging ModesVolumeMuteAuxiliary InputsResetSetting the ClockPress thebutton to turn the unit on. Pressturn the unit off.again toPress MODE to select between Radio, USB, Auxiliary Inputand Bluetooth. Modes of operation are shown in the display.Adjust volume using the volume knob (00-43).Press to silence the audio. Press again to resume listeningat the previously selected volume.Insert a 3.5mm cable in the unit's front AUX port.Press the RESET button to reset the unit back to the factorysettings if abnormal operation occurs. The reset button islocated on the front panel.With the unit on, press DISP to display clock time. Press andhold DISP until the hours begins to flash, then release.nnllPress the TUNEand TUNEto adjust the hours,then press the DISP, the minutes begins to flash, press theTUNEand TUNEbutton to adjust the minutes.nnllPress DISP momentarily to save the selected time.DisplayAudio / MenuPress DISP to toggle display between various displayedinformation.Press the volume knob momentarily to select between audiofunctions.Press and hold the volume knob for more than two secondsto select between the menu functions.Rotate the volume knob left/right to adjust or activate thedesired function/audio.5

MPR2110 OPERATIONAM/FM Tuner OperationSeek Tuning Press TUNE nn or TUNE ll to seek to the previous ornext strong station.Manual TuningnnllPress and hold TUNEor TUNEto enter manualtuning mode, then press TUNEor TUNEmomentarily to change radio frequency up or down onestep at a time. Press and hold TUNEor TUNEtoadvance quickly.nnnnllBandPress BAND to select between FM1, FM2, FM3, AM1 andAM2 bands. Up to six presets can be programmedfor each band, enabling up to 18 FM stations and 12 AMstations to be stored in memory.Storing PresetsUp to 18 FM and 12 AM stations can be stored. To storea station, select the desired band and station. Press andhold the desired preset button (1-6) for more than twoseconds. When stored, the preset number will appear inthe display.Recalling PresetsPreset stations can be recalled any time by pressing thecorresponding preset button.Automatically StorePreset Scan Stations6llPress and hold AS/PS for more than 2 seconds to store18 FM stations and 12 AM stations automatically.Press AS/PS to recall each preset staion that stored in thememories in each band.

MPR2110 OPERATIONUSB OperationPlaying MP3 FilesTrack SelectFast Forwardand ReversePauseFolder AccessRepeatTo play MP3 files, insert a USB device containing MP3 files.Press TUNEPress TUNEtrack.to skip to the beginning of the next track.llnn to skip to the beginning of the previousPress and hold TUNEreverse a track.PressPressll or TUNE nn to fast forward ortemporarily stop USB playback.ll// IIII toagainto resume playback.Folders can be found by pressing Folder Up or Folder Down.About one second after the folder name is displayed, thefirst file under the selected folder will be displayed andplayback will begin.Press RPT to toggle between RPT ALL, RPT FLR and RPTONE. RPT ALL - Plays all tracks on USB device. RPT ONE - Continuously repeats selected track. RPT FLR - Continuously repeats all files in current folder.RandomPress RDM to play tracks in random order; press again tocancel the RDM function.IntroPress INT to play the first 10 seconds of each track; pressagain to cancel the INT function.7

MPR2110 OPERATIONBluetooth OperationPreparationPairing a NewDeviceBefore using a Bluetooth device, it must be paired andconnected. Ensure that Bluetooth is activated on yourdevice before beginning the pairing process.The head unit broadcasts the pairing signal constantly whenno devices are connected. Complete the pairing sequencefrom your Bluetooth device. Refer to the owner’s manual foryour device for more details.The device name is “Jensen Media Player”.The Bluetooth passcode is "1234”.Note: The head unit can be in any mode of operation whenpairing is performed.Streaming AudioTroubleshootingThe head unit supports A2DP wireless streaming audiofrom a Bluetooth mobile device directly to your head unit.The following functions can be used to control the music:ll to skip to the next available audio track. Press nn to skip to the previous audio track. Pressl Press / II to toggle between play and pause duringplayback.8

MPR2110 OPERATIONTroubleshootingProblemUnit will not turn on(no power)Unit has power(but no sound)CauseActionYellow wire not connected or incorrectvoltage Red wire not connected orincorrect voltageBlack wire not connectedFuse blownSpeaker wires not connectedCheck connections for propervoltage (11 16VDC)One or more speaker wires touchingeach other or touching chassis groundCheck connection to groundReplace fuseCheck connections at speakersInsulate all bare speaker wiresfrom each other and chassisgroundUnit blows fusesYellow or red wire touching chassisgroundSpeaker wires touching chassis groundIncorrect fuse ratingCheck for pinched wireUse fuse with correct ratingNO FILE appearson displayNo playable MP3 files foundon the deviceCheck the device for validMP3 filesNO SUPPORT appearson displayAn invalid ID3 tag version is presentVersion 1.0 to 2.0 ID3 tags aresupported.Check for pinched wire9

MPR2110 OPERATIONLimited One Year WarrantyThis warranty gives you specific legalrights. You may also have other rightswhich vary from state to state.Namsung America Inc. warrants thisproduct to the original purchaser to be freefrom defects in material and workmanshipfor a period of one year from the date ofthe original purchase.Namsung America Inc. agrees, at ouroption, during the warranty period,to repair any defect in material orworkmanship or to furnish an equalnew, renewed or comparable product(whichever is deemed necessary) inexchange without charges, subject toverification of the defect or malfunction andproof of the date of purchase. Subsequentreplacement products are warranted forthe balance of the original warranty period.Who is covered? This warranty is extendedto the original retail purchaser for productspurchased from an authorized Jensendealer and used in the U.S.A.What is covered? This warranty covers alldefects in material and workmanship inthis product. The following are not covered:software, installation/removal costs,damage resulting from accident, misuse,abuse, neglect, product modification,improper installation, incorrect linevoltage, unauthorized repair or failureto follow instructions supplied with theproduct, or damage occurring duringreturn shipment of the product. Specificlicense conditions and copyright noticesfor the software can be found via www.jensenmobile.com.10What to do?1. Before you call for service, check thetroubleshooting guide in your owner’smanual. A slight adjustment of anycustom controls may save you a servicecall.2. If you require service during thewarranty period, you must carefullypack the product (preferably in theoriginal package) and ship it by prepaidtransportation with a copy of the originalreceipt from the retailer to anauthorized service center.3. Please describe your problem inwriting and include your name, areturn UPS shipping address (P.O. Boxnot acceptable), and a daytime phonenumber with your shipment.4. For more information and for thelocation of the nearest authorizedservice center please contact us by oneof the following methods: Call: 888-921-4088 E-mail: jensenmobile2015@gmail.comExclusion of Certain Damages: Thiswarranty is exclusive and in lieu of anyand all other warranties, expressed orimplied, including without limitation theimplied warranties of merchantability andfitness for a particular purpose and anyobligation, liability, right, claim or remedyin contract or tort, whether or not arisingfrom the company’s negligence, actualor imputed. No person or representativeis authorized to assume for the companyany other liability in connection with thesale of this product. In no event shall thecompany be liable for indirect, incidental orconsequential damages.

MPR2110 OPERATIONFCC ComplianceThis device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that maycause undesired operation.Warning: Changes or modifications to this unit not expressly approved by the partyresponsible for compliance could void the user’s authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected. Consult the dealer or an experienced radio/TV technician for help.11