7-INCH AUDIO/VIDEO RECEIVER ILX-207 FR ES

ML.book Page 1 Wednesday, November 30, 2016 3:00 PMEN7-INCH AUDIO/VIDEO RECEIVERiLX-207FRES INSTALLATION MANUAL GUIDE D’INSTALLATION MANUAL DE INSTALACIÓNALPINE ELECTRONICS MARKETING, INC.1-7, Yukigaya-Otsukamachi, Ota-ku,Tokyo 145-0067, JAPANPhone: 03-5499-4531ALPINE ELECTRONICS OF AMERICA, INC.19145 Gramercy Place, Torrance,California 90501, U.S.A.Phone 1-800-ALPINE-1 (1-800-257-4631)ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.161-165 Princes Highway, HallamVictoria 3803, AustraliaPhone 03-8787-1200Yamagata Printing Co., Ltd.2-6-34, Takashima, Nishi-ku, Yokohama,Kanagawa, JapanALPINE ELECTRONICS GmbHWilhelm-Wagenfeld-Str. 1-3, 80807 München, GermanyPhone 089-32 42 640ALPINE ELECTRONICS OF U.K. LTD.Alpine HouseFletchamstead Highway, Coventry CV4 9TW, U.K.www.alpine.co.ukALPINE ITALIA S.p.A.Viale Cristoforo Colombo 8,20090 Trezzano sul Naviglio MI, ItalyPhone 39 02 484781ALPINE ELECTRONICS DE ESPAÑA, S.A.Portal de Gamarra 36, Pabellón, 3201013 Vitoria (Alava)-APDO 133, SpainPhone 945-283588ALPINE ELECTRONICS France S.A.R.L.184 allée des ErablesCS 52016 – Villepinte95 945 Roissy CDG cedexFRANCEPhone : 33(0)1 48 63 89 89Designed by ALPINE JapanPrinted in Japan68-34732Z15-A (Y-B5)01GB01X208U-US.fmALPINE iLX-207 68-34732Z15-A (EN)

ML.book Page 2 Wednesday, November 30, 2016 3:00 PM01GB02X208U-US.fmALPINE iLX-207 68-34732Z15-A (EN)

ML.book Page 1 Wednesday, November 30, 2016 3:00 PMENGLISHContentsENWARNING . 2CAUTION . 2Precautions . 3Accessory List . 3FRInstallation . 3Caution concerning the installationlocation . 3Mounting the GPS Antenna inside thevehicle . 3Mounting the Microphone . 3Installation example using the OriginalMounting Bracket . 4Connections . 5If an ACC power supply is not available . 8System Example . 9ES1-EN01GB03X208U-USTOC.fmALPINE iLX-207 68-34732Z15-A (EN)

ML.book Page 2 Wednesday, November 30, 2016 3:00 PMWARNINGThis symbol means important instructions. Failureto heed them can result in serious injury or death.DO NOT DISASSEMBLE OR ALTER.DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TOMAKE GROUND CONNECTIONS.Bolts or nuts used for the brake or steering systems (or any othersafety-related system), or tanks should NEVER be used forinstallations or ground connections. Using such parts could disablecontrol of the vehicle and cause fire etc.Doing so may result in an accident, fire or electric shock.DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLEOPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.KEEP SMALL OBJECTS SUCH AS SCREWS OUT OF THE REACH OFCHILDREN.Doing so may obstruct forward vision or hamper movement etc.and results in serious accident.Swallowing them may result in serious injury. If swallowed, consulta physician immediately.DO NOT INSTALL THE MONITOR NEAR THE PASSENGER SEAT AIR BAG.USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.Failure to do so may result in fire or electric shock.DO NOT BLOCK VENTS OR RADIATOR PANELS.Doing so may cause heat to build up inside and may result in fire.USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.Use for other than its designed application may result in fire,electric shock or other injury.If the unit is not installed correctly the air bag may not functioncorrectly and when triggered the air bag may cause the monitor tospring upwards causing an accident and injuries.CAUTIONThis symbol means important instructions. Failureto heed them can result in injury or materialproperty damage.MAKE THE CORRECT CONNECTIONS.HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.Failure to make the proper connections may result in fire orproduct damage.The wiring and installation of this unit requires special technicalskill and experience. To ensure safety, always contact the dealerwhere you purchased this product to have the work done.USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.(Check with your dealer if you are not sure.) Failure to do so mayresult in fire, etc.BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERYTERMINAL.Failure to do so may result in electric shock or injury due toelectrical shorts.DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDINGOBJECTS.Arrange wiring and cables in compliance with the manual toprevent obstructions when driving. Cables or wiring that obstructor hang up on places such as the steering wheel, gear lever, brakepedals, etc. can be extremely hazardous.DO NOT SPLICE INTO ELECTRICAL CABLES.Never cut away cable insulation to supply power to otherequipment. Doing so will exceed the current carrying capacity ofthe wire and result in fire or electric shock.USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.Be sure to use only the specified accessory parts. Use of other thandesignated parts may damage this unit internally or may notsecurely install the unit in place. This may cause parts to becomeloose resulting in hazards or product failure.ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARPMETAL EDGE.Route the cables and wiring away from moving parts (like the seatrails) or sharp or pointed edges. This will prevent crimping anddamage to the wiring. If wiring passes through a hole in metal, use arubber grommet to prevent the wire’s insulation from being cut bythe metal edge of the hole.DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.Avoid installing the unit in locations with high incidence ofmoisture or dust. Moisture or dust that penetrates into this unit mayresult in product failure.DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.When drilling holes in the chassis for installation, take precautionsso as not to contact, damage or obstruct pipes, fuel lines, tanks orelectrical wiring. Failure to take such precautions may result in fire.2-EN01GB04X208U-US EN.fmALPINE iLX-207 68-34732Z15-A (EN)

ML.book Page 3 Wednesday, November 30, 2016 3:00 PMPrecautionsCaution concerning the installation location Be sure to disconnect the cable from the (–) battery post beforeinstalling your unit. This will reduce any chance of damage to theunit in case of a short-circuit. Be sure to connect the color coded leads according to thediagram. Incorrect connections may cause the unit tomalfunction or damage to the vehicle’s electrical system. When making connections to the vehicle’s electrical system, beaware of the factory installed components (e.g. on-boardcomputer). Do not tap into these leads to provide power for thisunit. When connecting the unit to the fuse box, make sure thefuse for the intended circuit of the unit has the appropriateamperage. When in doubt, consult your Alpine dealer. The unit uses female RCA-type jacks for connection to otherunits (e.g. amplifier) having RCA connectors. You may need anadaptor to connect other units. If so, please contact yourauthorized Alpine dealer for assistance. Be sure to connect the speaker (–) leads to the speaker (–)terminal. Never connect left and right channel speaker cables toeach other or to the vehicle body.Accessory List iLX-207 . 1Power cable. 1GPS Antenna. 1Antenna mounting plate. 1Cable clamp for antenna . 1setUSB extension cable. 1PRE OUT cable . 1Microphone. 1Interface cable. 1W.REMOTE cable. 1Face plate . 1HDMI Fixation Bracket. 1Flush head screw (M5 8) . 4Screw (M5 8). 4Owner’s Manual. 1setInstallationCautionDo not block the unit’s fan, thus preventing air circulation. Ifblocked, heat will accumulate inside the unit and may causea fire. example Angle of installationInstall at an angle between horizontal and 30 . Note that installing atan angle outside of this range will result in a loss of performance andpossibly damage.FR0 - 30 ESMounting the GPS Antenna inside the vehicle123Clean the mounting location.Put on the GPS Antenna mounting plate.Mount the GPS Antenna.GPS AntennaAntenna mounting plateThis unit Do not mount the GPS Antenna inside the center console.- Mount the GPS Antenna on a flat plane of the dash board or reartray.- Make sure the GPS Antenna is not covered (obstructed) by anymetallic surface or object. If the GPS Antenna is mounted near the unit, the reception becomespoor, and the location of your vehicle may not be displayed correctly.- Mount the GPS Antenna far away enough from the unit.- Bundle the GPS Antenna cable away from the rear of the unit. Some thermal reflection type or thermal absorption type glass mayinterrupt high frequency waves. If reception is poor with the antennainstalled inside the car, try to mount the antenna outside the car.Air ventilation holeMounting the MicrophoneRear of the UnitENFor safe use, make sure of the following: Location is stable and firm. Driver’s view and operations are not obstructed. Microphone is located where the driver’s voice can be easilypicked up (for example, on the sun visor).When you speak into the microphone, you should not have to changeyour driving posture. This may cause a distraction, taking yourattention away from safely driving your vehicle. Carefully considerdirection and distance while mounting the microphone. Confirm thatthe driver’s voice can be easily picked up at the selected location.3-EN01GB04X208U-US EN.fmALPINE iLX-207 68-34732Z15-A (EN)

ML.book Page 4 Wednesday, November 30, 2016 3:00 PMNote on using HDMI Connection CablesWhen using HDMI connection cables, secure the cables to the HDMITerminals with the supplied HDMI Fixation Bracket.MicrophoneCable clamp(Sold separately)12Slide the HDMI Fixation Bracket into the grooves (A).Secure it with the screw (B).HDMI Terminal(A)(A)Installation example using the OriginalMounting Bracket1Mount the original mounting bracket to the unit usingthe supplied screws.HDMI Fixation Bracket(Included)Ground Lead*(B)ChassisOriginal Mounting BracketScrews (M5 8) (Included)Face plate (Included)* To securely connect the ground lead, use an already installed screw on ametal part of the vehicle (marked ( )) or a clean, bare metal spot on thevehicle’s chassis.23Connect all other leads of the unit according to detailsdescribed in the “Connections” (page 5).Mounting the unit in a car. Fix the cables carefully. Do not damage them by tucking them intomovable parts, such as a seat rail, or by locating them against sharp orpointed edges.4-EN01GB04X208U-US EN.fmALPINE iLX-207 68-34732Z15-A (EN)

ML.book Page 5 Wednesday, November 30, 2016 3:00 PMConnectionsTo SiriusXM TunerVehicle AntennaENGPS Antenna (Included)SPEED SENSOR(Green/White)CAMERAIDATALINK I/FAUX INPUTREMO(Blue/White)Interface cableREVERSE(Orange/White)P. ANT(Blue)PARKING BRAKE(Yellow/Blue)To the vehicle speed pulse lineFRTo Front, Rear or Side cameraTo iDataLink moduleTo AUX output device or iDataLinkmoduleESTo amplifier or equalizerTo plus side of the back lamp signallead of the carTo power antennaTo the parking brake signal leadACC(Red)Ignition k)Rear Left(White)(White/Black)Front LeftSpeakers(Gray/Black)(Gray)Power cablePRE OUT cableFront Right(Violet/Black)(Violet)W.REMOTE cableDVD REMOTE(Brown)MON REMOTE(Brown)REMOTE IN(Brown/White)REMOTE OUT(Brown)DVD STATUS IN(Red/White)STEERING REMOTERear RightTo remote control input lead ofDVE-5300To remote control input lead of RearMonitorTo remote control output leadTo remote control input leadTo remote control output lead ofDVE-5300To steering remote control interfaceboxMIC INSUBWFRONT OUTMicrophone (Included)To input terminal of amplifier whenadding an external amplifierREAR OUT5-EN01GB04X208U-US EN.fmALPINE iLX-207 68-34732Z15-A (EN)

ML.book Page 6 Wednesday, November 30, 2016 3:00 PMSiriusXM Tuner Input ConnectorSwitched Power Lead (Ignition) (Red)To SiriusXM Tuner.Radio Antenna ReceptacleConnect this lead to an open terminal on the vehicle’s fuse boxor another unused power source that provides ( ) 12V onlywhen the ignition is turned on or in the accessory position.Speed Sensor Lead (Green/White)Fuse Holder (15A)Improper connection of the speed pulse line may causeimportant safety features of the vehicle to fail (such as thebrakes or air bags). Such failures may result in an accident andloss of life. We strongly recommend that the installation beperformed by a train

01GB02X208U-US.fm ALPINE iLX-207 68-34732Z15-A (EN) ML.book Page 2 Wednesday, November 30, 2016 3:00 PM