Globe & Angle Control Valve - Flowserve

3y ago
59 Views
2 Downloads
1.57 MB
36 Pages
Last View : 1m ago
Last Download : 2m ago
Upload by : Lilly Kaiser
Transcription

TECHNICAL BULLETINValtek Mark 200Globe & Angle Control ValveFCD VLENTB0200 12/12Experience In MotionExperience in Motion

Mark 200 Control Valve FCD VLENTB0200 12/12Valtek Mark 200 High Pressure Control ValveThe Mark 200 high pressure globe control valve designed to handle the most extreme severe service applications also offers high competitive flowcapacity. The Mark 200’s large galleries include longer stroke lengths which provide finer control and result in more stages of severe service protection insmaller size valves. With a clamped-in (DIN, screwed-in) seat ring, the Mark 200 has been designed for easy maintenance and flexibility. The seatretainer/cage (DIN, seat ring) in the Mark 200 can be changed out to provide an exceptional variety of severe service options, including cavitation controland noise abatement. This bulletin has been designed to provide clear, easy to find information, allowing the user to specify and apply theMark 200 control valve. Further sizing details are available in Performance!, Flowserve’s control valve sizing & selection software program (pleasecontact your local Flowserve representative for further details). The Mark 200 plug is typically pressure-balanced to allow smaller and more economicalactuators. Flow over or under the plug is available.Figure 2: DIN Mark 200 Cut-AwayFigure 1: ASME Mark 200 Cut-AwayContents2Table 1: ASME/DIN SpecificationsTable 2: ASME: Severe Service Trim OptionsTable 3.1: ASME: Materials of ConstructionTable 3.2: DIN: Materials of ConstructionTable 4: ASME/DIN Pessure Balanced Seal LimitsTable 5.1: ASME: Cv Flow Rate, Globe 900Table 5.2: ASME: Cv Flow Rate, Globe 1500Table 5.3: ASME: Cv Flow Rate, Globe 2500Table 5.4: ASME: Cv Flow Rate, Angle 900Table 5.5: ASME: Cv Flow Rate, Angle 1500Table 5.6: ASME: Cv Flow Rate, Angle 2500Table 6.1: DIN: Cv Flow Rate, Modified Equal PercentTable 6.2: DIN: Cv Flow Rate, LinearTable 7.1: ASME: Dimensions for Globe Body34567101112131415171819Table 7.2: ASME: Dimensions for Angle Body20Table 8.1: ASME: Shipping Weights/Dimensions for Globe Body21Table 8.2: ASME: Shipping Weights/Dimensions for Angle Body22Table 8.3: ASME: Sub Assy Shipping Weights for Globe & Angle23Table 9: ASME: Actuator Mounting Data24-25Table 10: ASME: Standard Actuator Sizing Data26Table 11: ASME: Actuator Selection Options27Table 12.1: DIN: Dimensions for Globe Body28Table 12.2: DIN: Dimensions for Angle Body29Table 13: DIN: Flange Connection Data30Table 14.1: DIN: Shipping Weights/Dimensions for Globe Body30Table 14.2: DIN: Shipping Weights/Dimensions for Angle Body31Table 15: DIN: Electric Actuator Selection Options32Table 16: DIN: Electric Actuator Thrust Data32

Mark 200 Control Valve FCD VLENTB0200 12/12ContentsFigure 1: ASME Mark 200 Cut-AwayFigure 2: DIN Mark 200 Cut-AwayFigure 3: Exploded Drawing of an ASME Mark 200Figure 4: Exploded Drawing of a DIN Mark 200Figure 5: ASME: Equal Percent and Linear Flow CurvesFigure 6: ASME: FL Flow CurvesFigure 7: ASME: X T Flow CurvesFigure 8: DIN: Modified Equal Percent and Linear Flow Curves225689916Figure 9: DIN: X T and FL Flow CurvesFigure 10: Dimensions for ASME Globe BodyFigure 11: Dimensions for ASME Angle BodyFigure 12: ASME Mark 200 Mounting Clamped-On (Size 2” only)Figure 13: ASME Mark 200 Mounting Bolt-OnFigure 14: Dimensions for DIN Mark 200 Globe BodyFigure 15: Dimensions for DIN Mark 200 Angle BodyFigure 16: Dimensions for DIN Mark 200 Actuator Mounting1619202424282932Table 1:SpecificationsASMEDINStyleGlobe & angleGlobe & angleSizes2 inch through 16 inch*DN 50 through DN 400Pressure ClassesASME 900, 1500, 2500PN 160 and PN 250End ConnectionsFlanged, buttweld, RTJ flangedFlanged, according to EN 1092-1:2008 Form B1Face to FaceISA 75.08.06, flanged; ISA 75.08.05, buttweld;ASME B16.10 RTJGlobe, according to DIN EN 558:2008 GR105(PN 160) GR106 (PN 250)Angle, according to DIN EN 558:2008GR105/2 (PN 160) GR93 (PN 250)Face FinishStandard: 125-250Ra 3,2 - 12,5 µm according EN 1092-1:2008Form B1 (std. 6,3 µm)Optional: 250-500Not applicableBonnetStandard, extendedStandard, heavy duty design, unbalanced standardheavy duty design, piston ring balancedPacking OptionsPTFE Vee-ring, PTFE square, Graphite, Graphite-braided,SureGuard, SureGuardXT, SafeGuard, others on requestAdjustable, graphite ringsTrim TypesStandardEqual percent, linearParabolic plug, modified characteristicEqual percent or linear ¹Low NoiseMegaStream, Stealth, TigerToothMulti hole plug, modified characteristicEqual percent or linear ¹Anti-CavitationCavControl, ChannelStream, TigerToothRadial multi step system, modified characteristicEqual percent or linear ¹Trim Materials400 series, 300 series stainless steels1.4122 or 1.4922Leakage RatesANSI Class IV, VI (with optional soft seat), Class VAccording to IEC 60534-4:2006, Class IV; ANSI/FCI 70-2, Class V ²* Class 2500 sizes up to 14”¹ Optional hardened material² Pressure balanced class III3flowserve.com

Mark 200 Control Valve FCD VLENTB0200 12/12Table 2:ASME Mark 200: Severe Service Trim Options*TrimDescriptionCavControlContains the cavitating bubbles in thecenter of the retainer, away from the metalsurfaces of the valve – a simple but veryeffective method of controlling cavitation inlow to mild conditions.ChannelStreamPrevents cavitation from forming andminimizes hydrodynamic noise in the mostsevere liquid applications. This designalso offers easy maintenance and productlongevity, even when installed in the mostdifficult applications.MegaStream4Decades of proven service make thisheavy-duty, drilled-hole cage one of themost common and effective solutions tocontrol valve noise.StealthThe most sophisticated noise attenuationdesign available. Effectively reduces soundpressure levels in the most demandingapplications.TigerToothOne of the most effective cavitationelimination and noise reduction trimsavailable, especially at high-pressure drops.Reduces sound pressure levels in gasapplications and prevents the formation ofgas bubbles, thereby eliminating cavitationin liquid applications.* For full details, see document FCENBR0068 and FCENBR0067

Mark 200 Control Valve FCD VLENTB0200 12/12Table 3.1:ASME Mark 200: Materials of ConstructionPartItemAvailable Materials1Carbon Steel (WCC) , 316 SS (CF8M), CrMo (WC9, C12A),Duplex SSSeat Ring*20316 SS, 316 SS / Alloy 6, 410 SS HT, 416 SS HT, 420 SS HTPlug*50316 SS, 316 SS / Alloy 6, 416 SS HT, 420 SS HT, CrMo/Alloy 21Plug Stem51316 SS, 316 SS / Alloy 6, 416 SS HT, 17-4PH SSCage30316 SS , 416 SS HT, CrMo/NitridedPressureBalanced Sleeve31316 SS, 410 SS, 410 SS HT, 420 SS HT**, 316 SS / Alloy 6,CrMo/NitridedBonnet40Carbon Steel, 316 SS, CrMo, Duplex SSSeat Gasket55PTFE, Spiral GraphiteSleeve Gasket56PTFE, Spiral GraphiteBonnet Gasket58PTFE, Spiral GraphiteO-Ring Seal65Buna, Viton , EPDM, PerflouroelastomerBack-up Ring66Carbon-Filled PTFE, PEEK, Vespel , RytonPTFE Seal65PTFE, Glass-Loaded PTFEMetal Multi-Seal65Rene 41 , Inconel X-750Carbon Seal65Carbon (Single & Triple)80Carbon Steel 1, Stainless Steel 2109, 117Carbon Steel 1, Stainless Steel 2Seal TypesBodyGland FlangeGland Flange Bolting Gland Flange 80Packing, Guides & Spacers83-88, 93-99Bonnet 40 Lower Guide83Upper Guide87316 SS / GL PTFE 1, 2, 316 SS / Graphite, Bronze C93200Packing88PTFE V-Ring 1, 2, PTFE / Glass V-Ring, Quick-Set 9001,Braided PTFE, AFPI, Graphite Rib/Braid, Safeguard, Sureguard,1303 FEP, Chesterton 5800E, Sureguard XT, TA-Luft DoubleGraphiteBody Bolting108B7-2H Zinc-coated 1, B7-2H Oxide-coated, B7M-2HM (NACE),B8-8 (304 SS) 2, B8M-8M (NACE), L7-7, L7M-7M (NACE),B16-7L, L7M-7M Uncoated (NACE)93-99Gland Flange Bolting 109, 117Body Bolting 108316 SS / GL PTFE 1, 2, 316 SS / Graphite, Bronze C93200,Alloy 6, UltimetPacking SpacersFigure 3: Exploded Drawing of an ASME Mark 200,pressure balanced with cageBonnet & Sleeve Gasket56 & 58Pressure Balance Seals 65,66Plug 50Pressure Balanced Sleeve 31Seat Ring 20Seat Gasket 56Body 1316 SS 1,2* The seat ring and plug have hard facing of alloy 6 or other materials on the seating and guiding surfaces** Internal Sleeve Only1Standard for Carbon Steel Body Construction2Standard for Stainless Steel Body Construction5flowserve.com

Mark 200 Control Valve FCD VLENTB0200 12/12Table 3.2:DIN Mark 200: Materials of ConstructionPartItemFigure 4: Exploded Drawing of a DIN Mark 200Available MaterialsBody1.1Bonnet Gasket1.2Pure Graphite on Support Plate from C-2761.06191.54191.73571.7379Stud Bolt1.31.7218 (KG)1.7709 (GA)1.4923 (V)Hex Nut1.41.7218 (KG)1.7709 (GA)1.4923 (V)Extension Sleeve1.51.7218 (KG)1.7709 (GA)1.4923 (V)Screwed Seat2.11.41221.4922Contoured Plug2.21.41221.4922Linear Thrust Unit 12.5Spring Pin2.3Stem2.41.4922Lock Nut 12.4Profil Ring2.5Bonnet3.1Bottom Ring3.21.4922A21.4122Pure Graphite1.04601.54151.7335Packing Box3.3Pure Graphite RingsGland Flange3.41.4922Stud Bolt3.51.4923 (V)Hex Nut3.61.4923 (V)Yoke Rod5.11.4122Flange5.21.0460Hex Nut5.3A2 - 70Stroke indicator scale5.4AluminiumHex Bolt5.5A2 - 70Washer5.6A2Hex Nut5.7A2 - 50Stroke indicator Disk5.91.0038Threaded Ring5.101.0460Set Screw5.1145 H1.7383Stroke Indicator Disk 5.9Hex Nut 5.7Hex Nut 3.6Gland Flange 3.4Packing Box 3.3Bottom Ring 3.2Bonnet 3.1Hex Nut 1.4Extension Sleeve 1.5Body Gasket 1.2Trim 2.2 2.4Screwed Seat 2.1Seat Gasket 2.5Stud Bolt 1.3Body 1.16

Mark 200 Control Valve FCD VLENTB0200 12/12Table 4:ASME Pressure Balanced Seal Limits (for DIN, see piston ring below)Seal StyleBuna O-RingASME ShutoffClass VLowerUpper F C F C-60-51250121Viton O-RingClass V0-18400204EPDM O-RingClass V-20-29350177204Filled PTFE Seal RingsClass IV-60-51400Spring Energized SealsClass V-350-212300149Carbon SealsClass IV0-181100*593*Metal Multi SealsClass III3001491600871Piston Ring 1Class III14-10842450* 800 F 426 C in oxidizing service1DIN/TUV pressure balanced seal limits7flowserve.com

Mark 200 Control Valve FCD VLENTB0200 12/12ASME Mark 200: Equal Percent and Linear Flow CurvesCapacity450% Open % 0419.2419.2Data represents a 6” Class 1500 Mark 200, equal percent trim.PercentOpen %CvLINCvFigure 5: ASME Mark 200: Equal Percent and Linear Flow Curves8LIN Cv

Mark 200 Control Valve FCD VLENTB0200 12/12ASME Mark 200: FL Flow Curves10.95FL0.90.85% OpenFO %FO LINFU %FU 930.80430.7020406080100FL curve for a 6” Class 1500 Mark 200, equal percent trim.PercentOpenFO %FU %Figure 6: ASME Mark 200: FL Flow CurvesASME Mark 200: XT Flow Curves10.9XT0.80.7% OpenFO %FU 80100XT curve for a 6” Class 1500 Mark 200, equal percent trim.PercentOpenFO %FU %9Figure 7: ASME Mark 200: XT Flow Curvesflowserve.com

Mark 200 Control Valve FCD VLENTB0200 12/12Table 5.1:ASME Mark 200: Globe Cv, Class 900, Standard RetainerValveSizeTrimNo.StrokeCharacteristic %2 in.2(50 mm)1.5 in.(38 mm)Linear %3 in.3(80 mm)2 in.(50 mm)Linear %4 in.4(100 mm)3 in.(76 mm)Linear %6 in.5.75(150 mm)4 in.(101 mm)Linear %8 in.7.75(200 mm)4 in.(101 mm)Linear %10 in.9.75(250 mm)6 in.(152 mm)Linear %12 in.11.25(300 mm)6 in.(152 mm)Linear %14 in.12.375(350 mm)8 in.(203 mm)Linear %16 in.(400 mm)1014.258 in.(203 mm)LinearFlowDirectionCv at Percent Open5102030405060708090100Flow ow Over0.71.12.74.76.812.122.331.537.741.1Flow Under1.43.08.014.320.426.432.036.139.241.042.4Flow Over1.53.18.113.519.625.931.735.839.141.142.5Flow low low 2Flow .6Flow .0Flow 5Flow 237.0Flow 61.5Flow 69.9Flow 1.2Flow .7469.9491.2Flow 2Flow 0821.8Flow 2931.2Flow 3.6821.8Flow .0931.2Flow 55.31325.8Flow 26.01473.6Flow 1280.31325.8Flow 21425.71473.6Flow 1717.81814.4Flow 762.21821.0Flow 7.01752.01814.4Flow .01761.81821.0Flow 1948.02057.6Flow 2140.42211.8Flow 1.81986.92057.6Flow 5.72139.92211.8Flow 92608.52755.2Flow 2689.62779.2Flow 46.62660.52755.2Flow 7.92688.92779.2

Mark 200 Control Valve FCD VLENTB0200 12/12Table 5.2:ASME Mark 200: Globe Cv, Class 1500, Standard RetainerValveSizeTrimNo.StrokeCharacteristic %2 in.1.875(50 mm)1.5 in.(38 mm)Linear %3 in.2.75(80 mm)2 in.(50 mm)Linear %4 in.3.625(100 mm)3 in.(76 mm)Linear %6 in.5.375(150 mm)4 in.(101 mm)Linear %8 in.7(200 mm)4 in.(101 mm)Linear %10 in.8.75(250 mm)6 in.(152 mm)Linear %12 in.10.375(300 mm)6 in.(152 mm)Linear %14 in.11.375(350 mm)8 in.(203 mm)Linear %16 in.(400 mm)138 in.(203 mm)LinearFlowDirectionCv at Percent Open5102030405060708090100Flow ow Over0.71.12.74.76.812.122.331.537.741.1Flow Under1.43.08.014.320.426.432.036.139.241.042.4Flow Over1.53.18.113.519.625.931.735.839.141.142.5Flow low ow 2Flow 214.2Flow Under2.75.113.122.734.156.494.5145.8181.3202.8Flow 1Flow 214.2Flow 19.1Flow 19.2Flow 8.5Flow .8419.2428.5Flow 5Flow 731.7Flow 804.8Flow 6.6731.7Flow .7804.8Flow 0.31119.9Flow 1.11282.5Flow 081.41119.9Flow 240.81282.5Flow 509.01593.9Flow 56.81505.4Flow .21539.11593.9Flow 51456.51505.4Flow 1718.71815.41908.8Flow 1847.2Flow 8.01753.01815.4Flow .81846.71908.8Flow 42288.12416.7Flow 2288.02364.3Flow 33.82333.72416.7Flow 6.02287.42364.311flowserve.com

Mark 200 Control Valve FCD VLENTB0200 12/12Table 5.3:ASME Mark 200: Globe Cv, Class 2500, Standard RetainerValveSizeTrimNo.StrokeCharacteristic %2 in.1.5(50 mm)1.5 in.(38 mm)Linear %3 in.2.25(80 mm)2 in.(50 mm)Linear %4 in.2.875(100 mm)3 in.(76 mm)Linear %6 in.4.375(150 mm)4 in.(101 mm)Linear %8 in.5.75(200 mm)4 in.(101 mm)Linear %10 in.7.25(250 mm)6 in.(152 mm)Linear %12 in.8.625(300 mm)6 in.(152 mm)Linear %14 in.(350 mm)129.58 in.(203 mm)LinearFlowDirectionCv at Percent Open5102030405060708090100Flow Under0.50.92.34.05.99.816.425.431.535.337.3Flow Over0.50.92.13.85.49.617.725.130.032.733.8Flow Under1.22.67.012.517.923.228.131.734.436.037.3Flow Over1.22.56.510.815.620.625.228.531.132.733.8Flow Under1.12.15.59.414.123.439.360.675.384.389.0Flow Over1.42.45.710.114.525.847.667.380.587.890.7Flow w Over3.16.717.328.941.955.467.776.583.587.890.7Flow low low .6Flow .0Flow .9Flow 1Flow 291.9Flow 301.1Flow 15.4Flow 0.9Flow .7515.4Flow .1580.9Flow 5798.0Flow 807.7Flow 0.6798.0Flow .5807.7Flow 5.21125.0Flow 0.01167.7Flow 086.41125.0Flow 29.71167.7Flow 499.31583.6Flow 92.31542.1Flow .71529.21583.6Flow 31492.01542.1

Mark 200 Control Valve FCD VLENTB0200 12/12Table 5.4:ASME Mark 200: Angle Cv, Class 900, Standard RetainerValveSizeTrimNo.StrokeCharacteristic %2 in.2(50 mm)1.5 in.(38 mm)Linear %3 in.3(80 mm)2 in.(50 mm)Linear %4 in.4(100 mm)3 in.(76 mm)Linear %6 in.5.75(150 mm)4 in.(101 mm)Linear %8 in.7.75(200 mm)4 in.(101 mm)Linear %10 in.9.75(250 mm)6 in.(152 mm)Linear %12 in.11.25(300 mm)6 in.(152 mm)Linear %14 in.12.375(350 mm)8 in.(203 mm)Linear %16 in.(400 mm)14.258 in.(203 mm)LinearFlowDirectionCv at Percent Open5102030405060708090100Flow Under0.81.64.06.910.417.228.844.455.261.765.2Flow Over1.01.74.07.010.017.832.946.655.660.762.7Flow w Over2.24.612.020.029.038.346.852.957.760.762.7Flow 5Flow Flow Under5.211.330.654.778.3101.0122.6138.2150.21

3 Mark 200 Control Valve FCD VLENTB0200 12/12 flowserve.com ASME DIN Style Globe & angle Globe & angle Sizes 2 inch through 16 inch* DN 50 through DN 400 Pressure Classes ASME 900, 1500, 2500 PN 160 and PN 250 End Connections Flanged, buttweld, RTJ flanged Flanged, according to EN 1092-1:2008 Form B1 Face to Face ISA 75.08.06, flanged; ISA 75.08.05, buttweld;

Related Documents:

Generic two-way valve Straight globe valve Gate valve Generic two-way angle valve Angle globe valve Safety angle valve Generic three-way valve Three-way globe valve Arrow indicates failure or unactuated flow path a. b. Generic four-way valve Four-way four-ported plug or ball valve Arro

the flow rate and pressure. To select the correct valve to fulfill these functions properly, an outline of the different types of valves and their features is given below. Butterfly valve Butterfly valve and globe valve Butterfly valve and ball valve Butterfly valve and gate valve Check valve Gate valve Globe valve Ball valve Valve shaped like a

3 Mark 200 Control Valve FCD VLENTB0200 12/12 flowserve.com ASME DIN Style Globe & angle Globe & angle Sizes 2 inch through 16 inch* DN 50 through DN 400 Pressure Classes ASME 900, 1500, 2500 PN 160 and PN 250 End Connections Flanged, buttweld, RTJ flanged Flanged, according to EN 1092-1:2008 Form B1 Face to Face ISA 75.08.06, flanged; ISA 75.08.05, buttweld;

Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to perform its intended function safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used

G- Autoflow Valve 2.0 GPM H- Autoflow Valve 2.5 GPM I- Autoflow Valve 2.8 GPM J- Autoflow Valve 3.0 GPM K- Autoflow Valve 3.3 GPM L- Autoflow Valve 3.5 GPM M- Autoflow Valve 4.0 GPM N- Autoflow Valve 4.5 GPM O- Autoflow Valve 5.0 GPM P- Autoflow Valve 5.5 GPM Q- Autoflow Valve 6.0 GPM R- Autoflow Valve

Control Valve Size Control Valve Flange Control Valve Profile Control Valve Trim Size Control Valve Trim Mat'l Control Valve Actuator DPRV Size DPRV Flange DPRV Trim Material DPRV Actuator P2 2.5" 0 ANSI 125 Flanges 22 Type of Control Valve Body (Sizes P8 & P1) F Control Valve Trim Size Full S Stainless Steel E029 Fail-in-Place, 24 Vac P2 2 .

Valve size DN 8 to 50 · NPS ¼ to 2 Maximum pressure 10 bar · 150 psi Medium temperature 0 to 160 C · 32 to 320 F Type 3349/3379 Pneumatic Control Valve Type 3349 Aseptic Angle Valve With USP-VI diaphragm Type 3349 Angle Valve with Type 3379 Pneumatic Actuator Special features Valve body made of stainless steel 1.4435 or 316L

TCIA (ASC A300) (Tree Care Industry Association) Revision BSR A300 Part 2-201x, Tree, Shrub, and Other Woody Plant Management - Standard Practices (Soil Management a. Assessment, b. Modification, c. Fertilization, and d. Drainage) (revision of ANSI A300 Part 2-2011) A300 (Part 2) Soil Management standards are performance standards for