QH441-OperationManual

3y ago
15 Views
4 Downloads
5.92 MB
176 Pages
Last View : 18d ago
Last Download : 1m ago
Upload by : Azalea Piercy
Transcription

qh441Original InstructionsOperator’s ManualQH441-en-140415

qh441Copyright Sandvik Construction Mobile Crushers and Screens Ltd.All rights reserved. No parts of this document may be reproduced or copied in any form or by anymeans without written permission from Sandvik. All data and information in this manual may bechanged without further notice. Reservation for misprints.Sandvik Construction Mobile Crushers and Screens Ltd.Tullyvannon, Ballygawley, Co.Tyrone, Northern Ireland, BT70 2HWTel. 44 (0) 28 8556 7799, Fax 44 (0) 28 8556 7007W: www.sandvikmobiles.comE: info.mobilecs@sandvik.com

qh441CONTENTS1 SAFETY1.1 Safety principles - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.1.1 Signal words - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.1.2 General hazard symbol - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.1.3 Essentials - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.1.4 Safety hazards pertaining to the equipment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.1.5 Colour coded safety signs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.1.6 Symbols for prohibited actions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.1.7 Symbols for mandatory actions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.1.8 Symbols for hazards - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1010101111121213141.2 Features for operator safety - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 151.3 Environmental safety - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.3.1 Hazardous materials - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.3.2 Battery disposal - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.3.3 Machine disposal - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -161617171.4 Personal protective equipment (PPE) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 181.5 Organisational safety measures - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 191.5.1 Fire risk control measures - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 191.6 Personnel qualifications, requirements and responsibilities - - - - - - - - - - - - - - - - - - - - - - - - - - 201.7 Safety advice regarding specific operational phases - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.7.1 Standard Operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.7.2 Blockage or malfunction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.7.3 Unguarded areas - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.7.4 Fire risk control measures - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -21212121221.8 Special work, including maintenance, parts disposal and hazardous materials - - - - - - - - - - 1.8.1 Securing equipment before performing maintenance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.8.2 Maintenance site conditions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.8.3 Replacement & removal of components - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.8.4 Climbing and falling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.8.5 Safety considerations during maintenance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.8.6 Safety considerations during cleaning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.8.7 Removal of safety devices, guards and decals - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.8.8 Surrounding structures - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.8.9 Safety when refuelling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -232324242426262627271.9 Specific hazards - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.9.1 Electrical energy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.9.2 Automotive batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.9.3 Gas, dust, steam, smoke and noise - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.9.4 Welding or Naked Flames - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.9.5 Hydraulic equipment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.9.6 Hazardous substances - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -282829293131321.10 Vibration levels - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 331.11 Hazard exclusion zones - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 351.12 Measured noise levels - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 361.13 Safety decals - Locations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 38Copyright Sandvik ConstructionQH441 en-1404153

qh441CONTENTS2 TRANSPORTATION & TECHNICAL DATA2.1 Special considerations for transport - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -422.1.1 Machine preparation for transport - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -422.1.2 Tracking machine on or off transport vehicle - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -492.1.3 Securing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -492.2 Application & limitations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -502.2.1 Common applications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -502.3 Technical specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -512.3.1 Feed hopper - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -512.3.2 Feed Conveyor Belt - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -512.3.3 Main Conveyor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -512.3.4 Lubrication Tank - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -512.3.5 Power Pack - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -522.3.6 Electrical system - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -522.3.7 Tracks - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -522.3.8 Dimensions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -522.3.9 Weight - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -522.3.10 Machine Transportation Dimensions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -533 PRODUCT OVERVIEW3.1 Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -563.1.1 Standard - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -563.1.2 Machine Models, Variations And Options - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -563.1.3 Optional items - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -563.2 Main Components - Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -573.3 Main control devices - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -583.3.1 Electrical controls - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -583.3.2 Display screen and soft keys - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -593.3.3 Icon highlighting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -593.3.4 Stopping machine in an emergency - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -603.3.5 Emergency stop locations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -603.3.6 Operation of an emergency stop - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -623.3.7 To reset an emergency stop - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -623.3.8 Set language, date and time - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -633.3.9 Radio remote control - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -643.3.10 Remote control battery recharging - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -653.3.11 Wired umbilical track control - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -663.4 Machine Working Dimensions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -674 COMMISSIONING AND SHUT DOWN4.1 General Safety - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -704.2 Pre-Commissioning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -714.2.1 Pre-Start Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -714.3 Engine starting procedure - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -734.3.1 Before starting engine - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -734.3.2 Engine start - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -734.4 Initial screen display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -754Copyright Sandvik ConstructionQH441 en-140415

qh441CONTENTS4.5 Moving the machine using the tracks - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4.5.1 Before moving the machine - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4.5.2 Moving the machine - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4.5.3 Coloured direction indicators - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4.5.4 Moving using the radio remote control - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4.5.5 Moving using wired umbilical control - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7676777878794.6 Preparing the crusher for operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 814.7 Legs set-up procedure - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 864.7.1 Lowering the legs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 864.7.2 Raising the legs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 884.8 Shut down the machine - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 904.8.1 Automatic mode shut down - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 904.8.2 Manual mode shut down - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 904.9 Lockout and tag procedure - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4.9.1 How to fit a single tag - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4.9.2 To remove a single tag - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4.9.3 How to fit a gang tag - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4.9.4 To remove a gang tag - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -92929293935 OPERATIONS5.1 Operations - minimum safety requirements - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 965.2 Machine crushing modes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 975.3 Methods of operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 995.4 Automatic mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5.4.1 Feeder start and stop - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5.4.2 Automatic operation - additional control screens - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5.4.3 Automatic mode screen 2 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5.4.4 To stop the crusher in automatic mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1001001001011015.5 Manual mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5.5.1 Feeder start and stop - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5.5.2 To stop the crusher in manual mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5.5.3 Feed conveyor manual speed adjustment - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5.5.4 Feed conveyor automatic speed control - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1021021021031035.6 Daily calibration of crusher wear parts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1055.7 Close side setting gap [CSS] - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1065.8 Feeding material into machine - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5.8.1 Before starting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5.8.2 Loading hopper with material - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5.8.3 Cone crusher - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1071071071075.9 Feed conveyor metal detector - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1085.10 Blocked crusher - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1096 ROUTINE MAINTENANCE6.1 Maintenance - minimum safety requirements - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1146.2 Reference information - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 116Copyright Sandvik ConstructionQH441 en-1404155

qh441CONTENTS6.3 Maintenance Schedules - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1176.3.1 First 50 to 80 Hours maintenance schedule - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1176.3.2 Daily maintenance schedule - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1176.3.3 Weekly maintenance schedule - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1186.3.4 Monthly maintenance schedule - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1196.3.5 250 Hours maintenance - C13 Tier 3a engine only - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1196.3.6 500 Hours maintenance schedule - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1196.3.7 1000 Hours maintenance schedule - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1206.3.8 2000 Hours or 1 year maintenance schedule - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1206.4 Maintenance procedures - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1216.4.1 Location of compartments for maintenance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1216.4.2 Fluid drain points - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1226.4.3 Track gearbox oil - check top up - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1236.4.4 Track gearbox oil - replace - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1246.4.5 Fuel tank - check top up - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1256.4.6 Hydraulic tank - check top up - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

means without written permission from Sandvik. All data and information in this manual may be changed without further notice. Reservation for misprints. Sandvik Construction Mobile Crushers and Screens Ltd. Tullyvannon, Ballygawley, Co.Tyrone, Northern Ireland, BT70 2HW Tel. 44 (0) 28 8556 7799, Fax 44 (0) 28 8556 7007 W: www.sandvikmobiles.com

Related Documents:

24 Troubleshooting 109 25 Maintenance 112 26 Decommissioning 113 26.1 Transfer 113 26.2 Disposal 113 27 Technical data 114 28 Keyboard Commands 115 . hinged DCA, which allows installers to “hang” the MIC camera temporarily on the DCA to make electrical connections, before bolting the camera to the DCA. .

Page-3 1-Operation INTHISSECTION: 1.1DisplayDoor 3 1.2WakeUpHeatPump 3 1.3DisplayPanel 4 1.4A

2000 MiniBanknoteCounter OperationManual www.safescan.com 1 1 0 4 2 0 0 8 2000 MAN

BarnsteadNanopure TOC-UV ultrapurewatersystem OperationManual Series2115and2117 ModelNo. Vol

Please read this operation manual before using the air conditioner. Keep this operation manual for future reference. . Smart mobile phone requires IOS or Android system: IOS system must support IOS 9.0 or above . Light sources like indoor lamps and

Page-3 1-Operation INTHISSECTION: 1.1DisplayDoor 3 1.2WakeUpHeatPump 3 1.3DisplayPanel 4 Equipment 6

A Pre-Revolution Time Line Directions: Using the list in the box, fill in the events and laws that led up to the American Revolution. Write the event or law below each year. You may need to do some online research to complete this exercise. Boston Tea Party, Stamp Act Congress, Intolerable Acts, The French and Indian

This paper aims to extend this range and introduces a novel engineering application of Origami: Folded Textured Sheets. Existing applications of Origami in engineering can broadly be catego-rized into three areas. Firstly, many deployable structures take inspiration from, or are directly derived from, Origami folding. Examples are diverse and range from wrapping solar sails [Guest and .