2004 – 2007 MAXIMA; ABS ACTIVATES WITH NORMAL BRAKING .
uly 10, 20072004 – 2007 MAXIMA; ABS ACTIVATES WITHNORMAL BRAKING / ABS WARNING LAMP IS ONThe Parts Information section of this bulletin has been amended and step 6 of the ServiceProcedure has changed. No other changes have been made.Please discard all previous copies of this bulletin.APPLIED VEHICLES: 2004 – 2007 Maxima (A34)APPLIED VINs:2004 – 2006 all VINs2007 built before 1N4BA41E(*)7C 806900APPLIED DATE:Built before July 10, 2006IF YOU CONFIRMThe ABS light is ON with one or more of the following DTC stored, C1105 – RR RH Sensor 2C1110 – Controller FailureC1124 – RR LH IN ABS SOLC1126 – RR RH IN ABS SOLand/orThe ABS system activates with normal braking.ACTIONS1. Remove only the right rear brake rotor, wheel hub assembly, baffle plate and ABSwheel sensor.2. Clean the corrosion off of the knuckle, wheel hub assembly, and baffle plate.3. Grind a notch in the knuckle locating hole (locating hole for plastic hub cap).4. Reassemble using the new plastic hub cap and a new ABS wheel sensor.5. If code C1126 and/or C1124 is stored; replace the ABS actuator.6. Test drive vehicle; recheck for code C1110 (refer to step 10 in the Service Procedure).IMPORTANT: The purpose of “ACTIONS” (above) is to give you a quick idea of the workyou will be performing. You MUST closely follow the entire Service Procedure (starting onpage 2) as it contains information that is essential to successfully completing the repair.Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians areproperly trained individuals who have the equipment, tools, safety instruction, and know-how to do a jobproperly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DONOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.1/6
PARTS INFORMATIONDESCRIPTIONSensor Assy – Anti Skid RearCap-Hub - RHABS ActuatorPART #47900-7Y00043234-ZK30AUse the VIN and the electronic partscatalog (FAST or equivalent) to findthe correct P/NQUANTITY111 (if needed)CLAIMS INFORMATIONSubmit a Primary Part (PP) type line claim using the following claims coding:DESCRIPTIONPFP OP CODE SYMDIAFRTRPL Rear ABS Sensor and(1)PX32AAZE321.1Plastic Hub Cap(1) Reference the FAST Parts Catalog and use the “Housing Assy – Rear Axle, RH” P/N asthe PFP.And, IF Necessary, use Combination Op Code:DESCRIPTIONRPL ABS ActuatorOP CODEPX321AFRT1.5SERVICE PROCEDURE1. Remove only the right rear (passenger side) brake rotor, wheel hub assembly, andbaffle plate (see Figure 1). Refer to Section RAX in the Service Manual for removal information.1. Knuckle2. Baffle plate3. Wheel hub assembly4. Brake RotorFigure 12/6
Sensor bolt2. Remove the plastic hub cap.3. Remove the right rear ABS wheelsensor as follows:a. Apply corrosion penetrant to thesensor bolt.b. Use a punch and hammer to lightlytap the sensor bolt.Plastichub capFigure 2Sensor boltc. Remove the sensor bolt and sensor.Figure 33/6
4. Clean corrosion off of the, knuckle, baffle plate, and wheel hub assembly. Use a non-metal brush on the wheel hub assembly. A metal brush may damagecomponents.1. Knuckle2. Baffle plate3. Wheel hub assembly4. Brake RotorFigure 4 A wire wheel or metal brush canbe used on the knuckle andbaffle plate.Figure 54/6
5. Grind or file a notch in the locating hole.Grind notchhereFigure 6Before grindingGrind notchhereFigure 7After grindingAbout1/8 inch(4 mm)Figure 85/6
6. Install the new plastic hub cap.7. Reassemble all parts removed in reverse order. Refer to section RAX in the Service Manual for reassembly information. Make sure to use a new ABS wheel sensor.8. If code C1124 and/or C1126 was stored; replace the ABS actuator. Refer to section BRC in the Service Manual for actuator replacement information.9. If you did not replace the ABS actuator in step 8, do the following:a. Use CONSULT-II to clear all ABS DTCs.b. Test drive the vehicle.c. Recheck for code C1110.d. If code C1110 is stored, replace the ABS actuator. Refer to section BRC in the Service Manual for actuator replacement information.10. Test drive the vehicle; make sure the incident is fixed and ABS light does not come on.6/6
Refer to section RAX in the Service Manual for reassembly information. Make sure to use a new ABS wheel sensor. 8. If code C1124 and/or C1126 was stored; replace the ABS actuator. Refer to section BRC in the Service Manual for actuator replacement information. 9. If you did not replace the ABS actuator in step 8, do the following: a.
Total (MJ/kg) 6 362 00 PC/ABS 25x25 13.340 6 362 01/51 PC/ABS 25x40 15.272 6 362 02/52 PC/ABS 25x60 18.538 6 362 06/56 PC/ABS 40x40 20.424 6 362 07/57 PC/ABS 40x60 22.632 6 362 08/58 PC/ABS 40x80 25.162 6 362 12/62 PC/ABS 60x60 28.198 6 362 13/63 PC/ABS 60x80 33.304 6 362 17 PC/ABS 80x80 37.729 6 362 25 PC/ABS 120x80 53.802 4. DIMENSIONS .
FABRICANTE: Whalen Furniture Manufacturing CATALOGO: Escritorio Executivo Villa Florenza (VF66ED) HECHO EN VIETNAM CARGA MÁXIMA 181.4 kg / 399.9 lb CARGA MÁXIMA 4.6 kg / 10.1 lb CARGA MÁXIMA 22.7 kg / 50 lb CARGA MÁXIMA 13.7 kg / 30.2 lb CARGA MÁXIMA 6.9 kg / 15.2 lb PESOS MÁXIMOS RECOMENDADOS .
ASME B16.5 Class 300 1.3 kPa abs, 13 mbar abs, 0.2 psia and 600 psi EN 1092-1 PN 16 1.3 kPa abs, 13 mbar abs, 0.2 psia and 13.5 bar EN 1092-1 PN 40 1.3 kPa abs, 13 mbar abs, 0.2 psia and 33.8 bar The pressure limit decreases with increasing temperature above 100 F (38 C), according to ASME B1
VOLKSWAGEN JETTA ABS REMOVAL FOR ABS ITT MARK 20 IE & ABS MARK 60. in engine compartment, to left of vacuum brake booster component of ABS Hydraulic Control Unit ABS/EDL/ASR/ESP - Mark 60 1. Control module, 47-pin (screwed to hydraulic unit). Two 4.8 mm wide contacts are located at bo
Chapter 1: 5 Biggest Mistakes You Are Making Today To Ruin Your Six-Pack Abs Goals Chapter 2: The Science Behind Six-Pack Abs Chapter 3: The Six-Pack Killers Chapter 4: Six Pack Abs Training Protocol—The Exercises Chapter 5: Six Pack Abs Training Protocol—Intro to High Intensity Interval Training Chapter 6: Six Pack Abs
ABS has been the leader in the avalanche airbag industry since 1985. The Kode ABS Compatible 42 and Kode ABS Compatible 22 10 pack body separates and easily zips on to the ABS Vario Base Unit for optimal safety and peace of mind in the backcountry. ABS NITROGEN GAS CANISTER The cartridges contain only non-hazardous, non-
2013 MAXIMA OWNER’S MANUAL For your safety, read carefully and keep in this vehicle. 2013 NISSAN MAXIMA A35-D Printing : February 2013 (12) . Fuel-filler door (P. 3-20) 9. Child safety rear door locks (P. 3-6) See the page number indicated in paren-theses for operating details. WII0156 EXTERIOR REAR
Soldier’s level of functioning as of the last developmental counseling session IAW AR 380-5, paragraph 5-5; and AR 25-2, paragraph 4-5. 2. First line leaders should: a. Conduct counseling sessions addressing the domains identified on the USA SLRRT with all Soldiers for whom they are responsible IAW paragraph F: Policies and
