Thermoplastic Polyurethane Elastomers (TPU)
ThermoplasticPolyurethaneElastomers (TPU)Elastollan – Product Range
Elastollan Elastollan is the brand name for thermoplastic polyurethane (TPU)from BASF. It stands for maximum reliability, consistent productquality and cost efficiency. Elastollan can be extruded into hoses,cable sheathing, belts, films and profiles, and can also be processedusing blow molding and injection molding technologies. Over the lastfew decades, the numerous benefits of Elastollan in all its forms –aromatic or aliphatic, very soft or glass fiber-reinforced, flameretardant or highly transparent – have been clearly demonstratedacross every sector of industry.This extensive product portfolio, which makes use of a variety of rawmaterials and formulations, is the starting point for successfullybringing innovative customer projects to fruition.We thrive on creative ideas and complex challenges – come andtalk to us!
Elastollan Nomenclature and Portfolio11 Series12 SeriesFHF / HFFR SeriesC SeriesB SeriesS Series500 Series800 SeriesA SeriesL SeriesSoft ProductsHPM Series (aliphatic)HPM Series (aromatic)R SeriesFood Contact SeriesSpecial ProductsSpecial Products – Infinergy Bondura SeriesHotbond Series0406081012141618192021222426283032343638
4Elastollan NomenclatureNomenclatureElastollan 11 85 A 10 W 000Elastollan The registeredtrade mark ofBASF forthermoplasticpolyurethaneElastollan A and Lstand for aliphaticthermoplasticpolyurethanesInfinergy SeriesThe letter or number characterizesthe polyol baseShore HardnessGranule ShapeLubricantAdditivesAdditivesShore hardnessA (35 - 98)1 cylindrical orlentil-shaped0, 1 no addedlubricantsESD electronicsensitive devices000 naturalB, C, S, Soft, 5,6, 7, 8, 9 polyester baseShore hardnessD (47 - 83)5 diced granules 2, 3, 5, 9 addedlubricants10, 11, 12, 13 polyether baseR glass fiberreinforcedFC food contactFHF/HFFR flame retardant.halogen-freeHPM high performance materialM mat surfaceHotbondSP specialproductN non- stabilizedBonduraN based onrenewableresourcesEXP experimental gradeQ compoundsP/W containsplasticizersT approved fordrinking waterapplicationsU UV-stabilizedTSG TPU forexpansion
Elastollan Portfolio5PortfolioProduct RangeChemistryShore HardnessRange Properties11Ether70 A - 75 DExcellent hydrolysis resistance, cold flexibility, resistance tomicroorganisms11 FHFEther flameretardant75 A - 54 DNon-halogen-based flame retardant, outstanding mechanical properties,excellent hydrolysis resistance, resistance to microorganisms12Ether85 A - 83 DHighly transparent, excellent hydrolysis resistance, cold flexibility,resistance to microorganisms12 FHFEther flameretardant70 D - 80 DNon-halogen-based flame retardant, outstanding mechanical properties,high rigidity, excellent hydrolysis resistance, resistance to microorganisms13Ether85 A - 90 AWater-vapor permeable, good tear propagation strength, very goodmechanical propertiesCEster80 A - 75 DExcellent mechanical properties, very good damping behavior,good rebound, very good wear resistanceBEster80 A - 65 DVery good mechanical properties, good cold flexibility, good wearresistanceSEster70 A - 65 DGood mechanical properties, good wear resistance, good dampingbehavior and rebound500Ester85 A - 65 DGood mechanical properties, good abrasion resistance600Ester70 A - 50 DTransparent, good damping behavior and rebound700Ester70 A - 65 DVery good hydrolysis resistance, high wear resistance, very lowcompression set, very good mechanical properties800Ester75 A - 95 AVery good transparency, good abrasion resistanceAEther or esteraliphatic65 A - 55 DColor-fast, non-yellowing, hydrolysis-resistant (ether)LEther or esteraliphatic75 A - 80 DTransparent, long-term UV-stabilitySupersoftEster or ether35 A - 65 AVery good wet grip, very flexible, very soft in part, highly transparent inpart, ESD grades with very good volume resistivityHPMEster60 A - 55 DVery good damping behavior and rebound, high temperature resistance,improved setting behavior, good demolding properties, color-fast,soft touchHFFREther flameretardant85 A - 92 ANon-halogen-based flame retardant, increased flame retardancy,reduced smoke density and toxicityCSEster70 A - 65 DVery good compression set, extremely low creep behaviorREster-reinforcedE-modulus1000 - 17000 MPaGlass fiber-reinforced, very high stiffness, low thermal expansioncoefficient, low shrinkage, very good impact resistanceFood Contact (FC)Ester or ether70 A - 75 DBasic suitability for food contact applications in FDA and EU-regulatedmarkets (see Food Contact Information)HotbondEsterSee tech. productinformationExcellent adhesive properties, good solubility with a broad viscosity rangeBonduraEsterSee tech. productinformationExcellent adhesive properties, low activation temperature, good solubilitywith a broad viscosity range
6Elastollan 11 SeriesElastollan 11 SeriesThermoplastic polyether polyurethane elastomerPropertyUnit of MeasurementTest ProcedureHardnessShore ADIN ISO 7619-1 (3s) HardnessShore DDIN ISO 7619-1 (3s)DensityTensile strengthElongation at breakg/cm³MPa%DIN EN ISO 1183-1-ADIN 53504-S2DIN 53504-S2Stress at 20 % elongationMPaDIN 53504-S2Stress at 100 % elongationMPaDIN 53504-S2Stress at 300 % elongationMPaDIN 53504-S2E-modulus from tensile testMPaDIN EN ISO 527Tear strengthkN/mDIN ISO 34-1.B(b)Abrasionmm³DIN ISO 4649-ACompression set 23 C / 72 hours%DIN ISO 815Compression set 70 C / 24 hours%DIN ISO 815Tensile strength after storage in water at 80 C for 42 daysMPaDIN 53504-S2Elongation at break after storage in water at 80 C for 42 days%DIN 53504-S2Notched impact resistance (Charpy) 23 CNotched impact resistance (Charpy) -30 CkJ/m²kJ/m²DIN EN ISO 179-1Burning behavior (depending on wall thickness)UL 94PropertyUnit of MeasurementTest ProcedureHardnessShore ADIN ISO 7619-1 (3s)HardnessShore DDIN ISO 7619-1 (3s)DensityTensile strengthElongation at breakg/cm³MPa%DIN EN ISO 1183-1-ADIN 53504-S2DIN 53504-S2Stress at 20 % elongationMPaDIN 53504-S2Stress at 100 % elongationMPaDIN 53504-S2Stress at 300 % elongationMPaDIN 53504-S2E-modulus from tensile testMPaDIN EN ISO 527Tear strengthkN/mDIN ISO 34-1.B(b)Abrasionmm³DIN ISO 4649-ACompression set 23 C / 72 hours%DIN ISO 815Compression set 70 C / 24 hours%DIN ISO 815Tensile strength after storage in water at 80 C for 42 daysMPaDIN 53504-S2Elongation at break after storage in water at 80 C for 42 days%DIN 53504-S2Notched impact resistance (Charpy) 23 CNotched impact resistance (Charpy) -30 CkJ/m²kJ/m²DIN EN ISO 179-1Burning behavior (depending on wall thickness)For more detailed information, please refer to the product information and processing guidance.UL 94
Elastollan 11 Series Excellent hydrolysis resistance Cold flexibility Resistance to microorganisms1170 A 101175 A 10 W1180 A 101185 A 10 W1185 A 101185 A 59 U1185 A 10 M1185 A 12 bnbnbnbV0 / V2HBV2HB1190 A 101195 A 101195 A 55 U1198 A 101154 D 101160 D 501164 D 111174 D 450450400400nbnbnbnbnbnbnb190nb18nb16nb12nb5HB7
8Elastollan 12 SeriesElastollan 12 SeriesThermoplastic polyether polyurethane elastomerPropertyUnit of MeasurementTest ProcedureHardnessShore ADIN ISO 7619-1 (3s)HardnessShore DDIN ISO 7619-1 (3s)DensityTensile strengthElongation at breakg/cm³MPa%DIN EN ISO 1183-1-ADIN 53504-S2DIN 53504-S2Stress at 20 % elongationMPaDIN 53504-S2Stress at 100 % elongationMPaDIN 53504-S2Stress at 300 % elongationMPaDIN 53504-S2E-modulus from tensile testMPaDIN EN ISO 527Tear strengthkN/mDIN ISO 34-1.B(b)Abrasionmm³DIN ISO 4649-ACompression set at 23 C / 72 hours%DIN ISO 815Compression set at 70 C / 24 hours%DIN ISO 815Notched impact strength (Charpy) 23 CNotched impact strength (Charpy) -30 CkJ/m²kJ/m²DIN EN ISO 179-1For more detailed information, please refer to the product information and processing guidance.
Elastollan 12 Series Highly transparentExcellent hydrolysis resistanceCold flexibilityResistance to microorganisms1285 A 10 U1290 A 10 U86891295 A 13 U1298 A 13 U1254 D 13 U1260 D 13 U1264 D 13 U1278 D 11 U1283 D 11 14nb13nb12nb103109
10Elastollan FHF / HFFR SeriesElastollan FHF / HFFR SeriesThermoplastic polyether polyurethane elastomerPropertyUnit ofMeasurementTest Procedure1185 A 10 FHF1190 A 10 FHF1191 A 10 FHFHardnessShore ADIN ISO 7619-1 (3s)899091HardnessShore DDIN ISO 7619-1 (3s)37DensityTensile strengthElongation at breakg/cm³MPa%DIN EN ISO 1183-1-ADIN 53504-S2DIN 53504-S21.23356001.25255501.2725600Stress at 20 % elongationMPaDIN 53504-S23.555Stress at 100 % elongationMPaDIN 53504-S28810Stress at 300 % elongationTear strengthAbrasionMPakN/mmm³DIN 53504-S2DIN ISO 34-1.B(b)DIN ISO 4649-A136035116030126540Compression set at 23 C / 72 hours%DIN ISO 8152526Compression set at 70 C / 24 hours%DIN ISO 8154543Tensile strength after storagein water at 80 C for 42 daysMPaDIN 53504-S22015Elongation at break after storagein water at 80 C for 42 days%DIN 53504-S2600640Notched impact strength (Charpy) 23 CNotched impact strength (Charpy) -30 CkJ/m²kJ/m²DIN EN ISO 179-1nb120nb46UL 94V0V0Burning behavior(depending on wall thickness)For more detailed information, please refer to the product information and processing guidance.
Elastollan FHF / HFFR Series 11Non-halogen-based flame retardantOutstanding mechanical propertiesExcellent hydrolysis resistanceResistance to microorganisms1192 A 10 FHF1147 D 10 FHF91941.251755055801154 D 10 FHF1185 A 10 HFFRSP 3092 A 10 HFFR 1270 D 10 FHF86951280 D 10 2156853030504572012270400750nb21503V0 / V296220V0V2 (0.4 mm)(0.43-0.47 mm ALL) V2 (3.0 mm)
12Elastollan C SeriesElastollan C SeriesThermoplastic polyester polyurethane elastomerPropertyUnit ofMeasurementTest ProcedureC 78 A 10C 80 A 10HardnessShore ADIN ISO 7619-1 (3s)8082HardnessShore DDIN ISO 7619-1 (3s)DensityTensile strengthElongation at breakg/cm³MPa%DIN EN ISO 1183-1-ADIN 53504-S2DIN 53504-S21.18506501.19506501.1950650Stress at 20 % elongationMPaDIN 53504-S2233Stress at 100 % elongationMPaDIN 53504-S2456Stress at 300 % elongationMPaDIN 53504-S28910E-modulus from tensile testMPaDIN EN ISO 527Tear strengthkN/mDIN ISO 34-1.B(b)606570Abrasionmm³DIN ISO 4649-A303030Compression set at 23 C / 72 hours%DIN ISO 815252525Compression set at 70 C / 24 hours%DIN ISO 815353535Tensile strength after storagein water at 80 C for 21 daysMPaDIN 53504-S2353538Elongation at break after storagein water at 80 C for 21 days%DIN 53504-S2650650650Notched impact strength (Charpy) 23 CNotched impact strength (Charpy) -30 CkJ/m²kJ/m²DIN EN ISO 179-1nbnbnbnbnbnbHBHBBurning behavior(depending on wall thickness)UL 94For more detailed information, please refer to the product information and processing guidance.C 85 A 108736
Elastollan C Series Outstanding mechanical propertiesVery good damping behaviorGood reboundVery good wear resistanceC 88 A 10C 90 A 13C 95 A 10889396C 98 A 10C 59 D 53C 60 D 53C 64 D 53C 74 D HBHBHB13
14Elastollan B SeriesElastollan B SeriesThermoplastic polyester polyurethane elastomerPropertyUnit of MeasurementTest ProcedureHardnessShore ADIN ISO 7619-1 (3s)HardnessShore DDIN ISO 7619-1 (3s)DensityTensile strengthElongation at breakg/cm³MPa%DIN EN ISO 1183-1-ADIN 53504-S2DIN 53504-S2Stress at 20 % elongationMPaDIN 53504-S2Stress at 100 % elongationMPaDIN 53504-S2Stress at 300 % elongationMPaDIN 53504-S2E-modulus from tensile testMPaDIN EN ISO 527Tear strengthkN/mDIN ISO 34-1.B(b)Abrasionmm³DIN ISO 4649-ACompression set at 23 C / 72 hours%DIN ISO 815Compression set at 70 C / 24 hours%DIN ISO 815Tensile strength after storage in water at 80 C for 21 daysMPaDIN 53504-S2Elongation at break after storage in water at 80 C for 21 days%DIN 53504-S2Notched impact strength (Charpy) 23 CNotched impact strength (Charpy) -30 CkJ/m²kJ/m²DIN EN ISO 179-1For more detailed information, please refer to the product information and processing guidance.
Elastollan B Series Very good mechanical properties Good cold flexibility Good wear resistanceB 80 A 11B 85 A 11B 90 A 15B 95 A 158283919642B 98 A 15B 60 D 15B 64 D 0500450400nbnbnbnbnbnbnb200nb18nb10nb815
16Elastollan S SeriesElastollan S SeriesThermoplastic polyester polyurethane elastomerPropertyUnit of MeasurementTest ProcedureHardnessShore ADIN ISO 7619-1 (3s)HardnessShore DDIN ISO 7619-1 (3s)DensityTensile strengthElongation at breakg/cm³MPa%DIN EN ISO 1183-1-ADIN 53504-S2DIN 53504-S2Stress at 20 % elongationMPaDIN 53504-S2Stress at 100 % elongationMPaDIN 53504-S2Stress at 300 % elongationMPaDIN 53504-S2E-modulus from tensile testMPaDIN EN ISO 527Tear strengthkN/mDIN ISO 34-1.B(b)Abrasionmm³DIN ISO 4649-ACompression set at 23 C / 72 hours%DIN ISO 815Compression set at 70 C / 24 hours%DIN ISO 815Notched impact strength (Charpy) 23 CNotched impact strength (Charpy) -30 CkJ/m²kJ/m²DIN EN ISO 179-1For more detailed information, please refer to the product information and processing guidance.
Elastollan S Series Good mechanical properties Good wear resistance Good damping behavior and reboundS 70 A 12S 80 A 10S 85 A 10S 90 A 55S 95 A 55708185939641S 98 A 53S 60 D 53D 64 D bnbnb14nb13nb4nb4nbnb17
18Elastollan 500 SeriesElastollan 500 SeriesThermoplastic polyester polyurethane elastomer Good mechanical properties Good abrasion resistancePropertyUnit ofMeasurementTest Procedure585 A 11590 A 53HardnessShore ADIN ISO 7619-1 (3s)8594HardnessShore DDIN ISO 7619-1 (3s)4153516160DensityTensile strengthElongation at breakg/cm³MPa%DIN EN ISO 1183-1-ADIN 53504-S2DIN 4501.2655510Stress at 20 %elongationMPaDIN 53504-S235915Stress at 100 %elongationMPaDIN 53504-S2681218.5Stress at 300 %elongationMPaDIN 53504-S210131623Tear strengthkN/mDIN ISO 34-1.B(b)95100150130180170Abrasionmm³DIN ISO 4649-A353530403030Compression set at23 C / 72 hours%DIN ISO 81517242624Compression set at70 C / 24 hours%DIN ISO 81535364046For more detailed information, please refer to the product information and processing guidance.598 A 53598 A 10560 D 53560 D 59
Elastollan 800 SeriesElastollan 800 SeriesThermoplastic polyester polyurethane elastomer Very good transparency Good abrasion resistancePropertyUnit ofMeasurementTest Procedure880 A 13 N890 A 10HardnessShore ADIN ISO 7619-1 (3s)7793HardnessShore DDIN ISO 7619-1 (3s)DensityTensile strengthElongation at breakg/cm³MPa%DIN EN ISO 1183-1-ADIN 53504-S2DIN 53504-S21.2407001.2245480Stress at 20 % elongationMPaDIN 53504-S21.86Stress at 100 % elongationMPaDIN 53504-S24.210Stress at 300 % elongationMPaDIN 53504-S27.623Tear strengthkN/mDIN ISO 34-1.B(b)60110Abrasionmm³DIN ISO 4649-A3545Compression set at 23 C / 72 hours%DIN ISO 8153232Compression set at 70 C / 24 hours%DIN ISO 8155443For more detailed information, please refer to the product information and processing guidance.19
20Elastollan A SeriesElastollan A SeriesThermoplastic aliphatic polyether/-ester polyurethane elastomer Color-fast Non-yellowing Hydrolysis resistant (ether)Aliphatic EthersUnit ofPropertyMeasurementTest ProcedureA 1182 A 10 N A 1185 A 10 N81HardnessShore ADIN ISO 7619-1 (3s)HardnessShore DDIN ISO 7619-1 (3s)DensityTensile strengthElongation at breakg/cm³MPa%DIN EN ISO 1183-1-ADIN 53504-S2DIN 53504-S2A 1154 D 10 N86Aliph. EstersA C 88 A 1288541.06156001.05186501.11306001.1417640Stress at 20 % elongationMPaDIN 53504-S234123.1Stress at 100 % elongationMPaDIN 53504-S267.8207Stress at 300 % elongationMPaDIN 53504-S212102410.6Tear strengthkN/mDIN ISO 34-1.B(b)453511040Abrasionmm³DIN ISO 4649-A6710724110Compression set at 23 C /72 hours%DIN ISO 81530232742Compression set at 70 C /24 hours%DIN ISO 81555524644Vicat softening temperature at10 N and 120 C/h(Proc. A120) CDIN EN ISO 306For more detailed information, please refer to the product information and processing guidance.140
Elastollan L Series21Elastollan L SeriesThermoplastic aliphatic polyether/-ester polyurethane elastomer Superior transparency Long-term UV-stabilityAliphatic EthersUnit ofPropertyMeasurementTest ProcedureL 1185 A 12 L 1160 D 12HardnessShore ADIN ISO 7619-1 (3s) 85HardnessShore DDIN ISO 7619-1 (3s)56Densityg/cm³DIN EN ISO1183-1-A 1.08TensilestrengthMPaDIN 53504-S2Elongation atbreak%Stress at 20 %elongationAliphatic EstersL 1275 A 10L 785 A 10708663801.11.081.121.131.13173035283046DIN 53504-S2550400550500350320MPaDIN 53504-S2391211Stress at 100 %elongationMPaDIN 53504-S27112.5412Stress at 300 %elongationMPaDIN 53504-S2111661018.6Tear strengthkN/mDIN ISO 34-1.B(b)70704265130For more detailed information, please refer to the product information and processing guidanceL 765 D 10 L 780 D 10
22Elastollan Soft ProductsElastollan Soft ProductsThermoplastic polyether/-ester polyurethane elastomerPropertyUnit of MeasurementTest ProcedureHardnessShore ADIN ISO 7619-1 (3s)Densityg/cm³DIN EN ISO 1183-1-ATensile strengthElongation at breakStress at 20 % elongationMPa%MPaDIN 53504-S2DIN 53504-S2DIN 53504-S2Stress at 100 % elongationMPaDIN 53504-S2Stress at 300 % elongationMPaDIN 53504-S2Tear strengthkN/mDIN ISO 34-1.B(b)Abrasionmm³DIN ISO 4649-ACompression set at 23 C / 72 hours%DIN ISO 815Compression set at 70 C / 24 hours%DIN ISO 815Notched impact strength (Charpy) 23 CNotched impact strength (Charpy) -30 CkJ/m²kJ/m²DIN EN ISO 179-1Volume resistivityOhm*cmDIN IEC 60093PropertyUnit of MeasurementTest ProcedureHardnessShore ADIN ISO 7619-1 (3s)Densityg/cm³DIN EN ISO 1183-1-ATensile strengthElongation at breakStress at 20 % elongationMPa%MPaDIN 53504-S2DIN 53504-S2DIN 53504-S2Stress at 100 % elongationMPaDIN 53504-S2Stress at 300 % elongationMPaDIN 53504-S2Tear strengthkN/mDIN ISO 34-1.B(b)Abrasionmm³DIN ISO 4649-ACompression set at 23 C / 72 hours%DIN ISO 815Compression set at 70 C / 24 hours%DIN ISO 815Notched impact strength (Charpy) 23 CNotched impact strength (Charpy) -30 CkJ/m²kJ/m²DIN EN ISO 179-1Volume resistivityOhm*cmDIN IEC 60093For more detailed information, please refer to the product information and processing guidance.
Elastollan Soft Products 23Very good wet gripVery flexibleHighly transparent in partVery soft in partESD grades with very good volume resistivitySP 1145 A 12 PUSP 1150 A 19 PSP 1155 A 12 PU1160 A 10 PC 60 A 10 PS 60 A 12 oft 35 A 12 PSoft 45 A 12 PSoft 45 A 12 ESD565 A 12 P560 A 13 P TSG565 A 12 ESDMB 60 A 12 ESD37464
Elastollan is the brand name for thermoplastic polyurethane (TPU) from BASF. It stands for maximum reliability, consistent product quality and cost efficiency. Elastollan can be extruded into hoses, cable sheathing, belts, films and profiles, and can also be processed using blow molding and injection molding technologies. Over the last few decades, the numerous benefits of Elastollan in .
Overmolding of Thermoplastic Elastomers: Engineered solutions for consumer product differentiation . Krishna Venkataswamy, Rajesh Varma and Walter Ripple, Thermoplastic Elastomers Division,GLS Corporation, 833, Ridgeview Drive, McHenry, IL 60050 . Introduction. Ove
MDI) copolymerized with 1,4-butane diol (BD) and a segment of poly(1,6-hexylene adipate), and C74D50 (aromatic polyester-TPU, assigned as Ar-TPU) composed of diphenylmethane diisocyanate (MDI), BD and poly(1,4-butylene adipate). Both TPU are commercial products by BASF Polyurethanes GmbH.
Thermoplastic Elastomers Engineered thermoplastic elastomers (TPE’s), are one of the most versatile plastics available today. Our wide range of TPE’s combine many of the performance properties of thermoset rubber with the processing ease of plastic thereby providing design options and greater cost-reduction opportunities.
1 registred trade mark of Danquinsa GmbH 2 registred trade mark of the Lubrizol Corporation 3 registred trade mark of Concentrol S. A. 4 DANTHANE 1 Thermoplastic polycaprolactone-polyurethane and polyurethane in compound and powder form compounds for adhesive coatings and thermoplastic adhesive equipments extensive range of thermoplastic powder with different melting ranges for laminations
If a decision is made to use regrind, recommended levels should not exceed 30% with residence times in the barrel as low as possible. PP or HDPE is recommended for purging the extruder after the extruding TPU’s.
POLYUREThANE CASE APPLICATIONS Polyurethane is a versatile material that is ideally suited for a wide range of CASE (Coatings, Adhesives, Sealants, and Elastomers) applications. As the leading supplier of additives to the polyurethane industry, Evonik offers a wide array of advanced technologies for CASE formulations.
The use of diphenylmethane-4,4‟-diisocyanate (MDI) can be seen as a breakthrough in the history of TPUs, since it offered the opportunity to produce melt processible polyurethane elastomers.[6] From then on, more and more TPU products appeared on the market, such as Estane and Pellethane (produced
IN ARTIFICIAL INTELLIGENCE Stuart Russell and Peter Norvig, Editors _I FORSYTH & PONCE GRAHAM JURAFSKY & MARTIN NEAPOLITAN RUSSELL & NORVIG Computer Vision: A Modern Approach ANSI Common Lisp .
