Manual For The Design Of Reinforced Concrete Building .

3y ago
45 Views
4 Downloads
1.39 MB
157 Pages
Last View : 1m ago
Last Download : 2m ago
Upload by : Bennett Almond
Transcription

The Institution of Structural EngineersThe Institution of Civil EngineersMARCH 2000Manual for the designof reinforced concretebuilding structures to EC2Published for the Institution of Structural Engineers

ConstitutionD J Lee CBE BScTech DIC FEng FIStructE FICE Chairman, (until April 1995)(previously G Maunsell & Partners)R S Narayanan BE(Hons) MSc DIC FEng FIStructE Chairman, (from May 1995)(S B Tietz & Partners)Professor A W Beeby BSc(Eng) PhD CEng MIStructE MICE(University of Leeds)P G Cobb CEng MICE(Sir Robert McAlpine & Sons Ltd)R F D Povey CEng FIStructE(Mitchell McFarlane & Partners)S S Ray BSc CEng FICE(Robert Benaim & Associates)R T Whittle MA CEng MICE(Ove Arup & Partners)K R Wilson MA CEng MICE(G Maunsell & Partners)R J W Milne BSc, Secretary to the Task Group(The Institution of Structural Engineers)Editorial PanelThe final version was prepared by an Editorial Panel consisting of:R S Narayanan, ChairmanK R WilsonR J W Milne, Secretarybe contacted at 11 Upper Belgrave Street, London SW1X 8BH.

ContentsForeword1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111.1 Aims of the Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111.2 Eurocode system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111.3 Scope of the Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121.4 Contents of the Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122 General principles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132.2 Stability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132.3 Robustness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132.4 Movement joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142.5 Fire resistance and durability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143 Design principles – reinforced concrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163.1 Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163.2 Limit states . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163.2.1 Ultimate limit state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163.2.2 Serviceability limit states . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163.3 Material and design stresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174 Initial design – reinforced concrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184.2 Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184.3 Material properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194.4 Structural form and framing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194.5 Fire resistance and durability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194.6 Stiffness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194.7 Sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214.7.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214.7.2 Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214.7.3 Width of beams and ribs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214.7.4 Sizes and reinforcement of columns . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214.7.5 Walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224.7.6 Shear in flat slabs at columns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .234.7.7 Adequacy of chosen sections to accommodate the reinforcement . . . . . . . .234.7.7.1 Bending moments and shear forces . . . . . . . . . . . . . . . . . . . . . . . . .234.7.7.2 Provision of reinforcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .244.8 The next steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .254.9 Reinforcement estimates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .255 Final design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .275.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .275.1.1 Checking of all information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .275.1.2 Preparation of a list of design data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285.1.3 Amendment of drawings as a basis for final calculations . . . . . . . . . . . . . .285.1.4 Final design calculations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28IStructE EC2 (Concrete) Design Manual3

5.2 Slabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .295.2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .295.2.2 Fire resistance and durability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .295.2.2.1 Fire resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .295.2.2.2 Durability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .305.2.3 Bending moments and shear forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .315.2.3.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .315.2.3.2 One-way spanning slabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .325.2.3.3 Two-way spanning slabs on linear supports . . . . . . . . . . . . . . . . . . .325.2.3.4 Flat slabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .325.2.4 Section design – solid slabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .375.2.4.1 Bending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .375.2.4.2 Shear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .395.2.4.3 Openings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .425.2.5 Span/effective depth ratios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .425.2.6 Section design – ribbed and coffered slabs . . . . . . . . . . . . . . . . . . . . . . . . .425.2.6.1 Bending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .425.2.6.2 Span/effective depth ratios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .425.2.6.3 Shear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .445.2.6.4 Beam strips in ribbed and coffered slabs . . . . . . . . . . . . . . . . . . . . .445.2.7 Notes on the use of precast floors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .445.3 Structural frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .455.3.1 Division into subframes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .455.3.2 Elastic analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .455.3.3 Redistribution of moments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .455.3.4 Design shear forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .465.4 Beams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .465.4.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .465.4.2 Fire resistance and durability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .475.4.2.1 Fire resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .475.4.2.2 Durability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .485.4.3 Bending moments and shear forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .485.4.4 Section design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .495.4.4.1 Bending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .495.4.4.2 Minimum and maximum amounts of reinforcement . . . . . . . . . . . .525.4.4.3 Shear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .555.4.5 Span/effective depth ratios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .575.5 Columns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .575.5.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .575.5.2 Slenderness, fire resistance and durability . . . . . . . . . . . . . . . . . . . . . . . . .585.5.2.1 Slenderness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .585.5.2.2 Fire resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .585.5.2.3 Durability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .585.5.3 Axial loads and moments – non-slender columns . . . . . . . . . . . . . . . . . . . .605.5.4 Axial loads and moments – slender columns . . . . . . . . . . . . . . . . . . . . . . .605.5.4.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .605.5.4.2 Calculation of first-order moments . . . . . . . . . . . . . . . . . . . . . . . . .615.5.4.3 Calculation of the ultimate deflection . . . . . . . . . . . . . . . . . . . . . . .625.5.5 Section design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .645.5.6 Reinforcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .644IStructE EC2 (Concrete) Design Manual

5.6 Walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .645.6.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .645.6.2 Slenderness, fire resistance and durability . . . . . . . . . . . . . . . . . . . . . . . . .665.6.2.1 Slenderness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .665.6.2.2 Fire resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .665.6.2.3 Durability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .665.6.3 Axial load and moments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .685.6.3.1 In-plane bending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .685.6.3.2 Bending at right-angles to the walls . . . . . . . . . . . . . . . . . . . . . . . .685.6.3.3 Slender walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .685.6.4 Section design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .685.6.4.1 Walls not subject to significant bending at rightangles to the wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .685.6.4.2 Intersecting walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .695.6.5 Reinforcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .695.6.6 Openings in shear and core walls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .695.7 Staircases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .705.7.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .705.7.2 Fire resistance, durability and concrete grades . . . . . . . . . . . . . . . . . . . . . .705.7.3 Bending moments and shear forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .705.7.4 Effective spans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .705.7.4.1 Stairs spanning between beams or walls . . . . . . . . . . . . . . . . . . . . .705.7.4.2 Stairs spanning between landing slabs . . . . . . . . . . . . . . . . . . . . . . .705.7.4.3 Stair with open wells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .715.7.5 Span/effective depth ratios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .715.7.6 Section design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .715.8 Design of non-suspended ground floor slabs . . . . . . . . . . . . . . . . . . . . . . . . . . .725.9 Guidance for the design of basement walls . . . . . . . . . . . . . . . . . . . . . . . . . . . .725.9.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .725.9.2 Bending moments and shear forces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .735.9.3 Section design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .735.9.4 Foundation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .735.9.5 Reinforcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .735.10 Foundations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .735.10.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .735.10.2 Durability and cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .745.10.3 Types of foundation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .745.10.4 Plan area of foundations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .745.10.5 Design of spread footings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .755.10.5.1 Axially loaded unreinforced pad footings . . . . . . . . . . . . . . . . . . .755.10.5.2 Axially loaded reinforced pad footings . . . . . . . . . . . . . . . . . . . . .755.10.5.3 Eccentrically loaded footings . . . . . . . . . . . . . . . . . . . . . . . . . . . .765.10.6 Design of other footings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .765.10.6.1 Strip footings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .765.10.6.2 Combined footings and balanced footings . . . . . . . . . . . . . . . . . . .765.10.7 Reinforcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .765.10.8 Design of rafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .775.10.9 Design of pile caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .775.10.10 Reinforcement in pile caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .785.11 Robustness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78IStructE EC2 (Concrete) Design Manual5

5.11.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .785.11.2 Tie forces and arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .795.12 Detailing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .805.12.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .805.12.2 Bond conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .805.12.3 Anchorage and lap lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .805.12.4 Transverse reinforcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .805.12.5 Additional rules for high-bond bars exceeding 32mm in diameter . . . . . .805.12.6 Curtailment of bars in flexural members . . . . . . . . . . . . . . . . . . . . . . . . .855.12.7 Corbels and nibs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .876 Design principles – prestressed concrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .886.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .886.2 Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .896.3 Limit states . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .926.3.1 Ultimate limit state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .926.3.2 Serviceability limit states . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .926.4 Materials, prestressing components and design stresses . . . . . . . . . . . . . . . . . . .927 Initial design – prestressed concrete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .977.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .977.2 Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .977.3 Material properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .987.4 Structural form and framing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .987.5 Fire resistance and durability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .997.6 Stiffness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .997.6.1 Slabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .997.6.2 Beams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1007.7 Sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1007.7.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1007.7.2 Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1017.7.3 Width of beams and ribs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1017.7.4 Punching shear in flat slabs at columns . . . . . . . . . . . . . . . .

The Eurocode for the Design of Concrete Structures(EC2) is likely to be published as a Euronorm (EN) in the next few years. The prestandard (ENV) for EC2 has now been avail-able since 1992. To facilitate its familiarisation the Institution of Structural Engineers and

Related Documents:

May 02, 2018 · D. Program Evaluation ͟The organization has provided a description of the framework for how each program will be evaluated. The framework should include all the elements below: ͟The evaluation methods are cost-effective for the organization ͟Quantitative and qualitative data is being collected (at Basics tier, data collection must have begun)

Silat is a combative art of self-defense and survival rooted from Matay archipelago. It was traced at thé early of Langkasuka Kingdom (2nd century CE) till thé reign of Melaka (Malaysia) Sultanate era (13th century). Silat has now evolved to become part of social culture and tradition with thé appearance of a fine physical and spiritual .

On an exceptional basis, Member States may request UNESCO to provide thé candidates with access to thé platform so they can complète thé form by themselves. Thèse requests must be addressed to esd rize unesco. or by 15 A ril 2021 UNESCO will provide thé nomineewith accessto thé platform via their émail address.

̶The leading indicator of employee engagement is based on the quality of the relationship between employee and supervisor Empower your managers! ̶Help them understand the impact on the organization ̶Share important changes, plan options, tasks, and deadlines ̶Provide key messages and talking points ̶Prepare them to answer employee questions

Dr. Sunita Bharatwal** Dr. Pawan Garga*** Abstract Customer satisfaction is derived from thè functionalities and values, a product or Service can provide. The current study aims to segregate thè dimensions of ordine Service quality and gather insights on its impact on web shopping. The trends of purchases have

Bruksanvisning för bilstereo . Bruksanvisning for bilstereo . Instrukcja obsługi samochodowego odtwarzacza stereo . Operating Instructions for Car Stereo . 610-104 . SV . Bruksanvisning i original

Chính Văn.- Còn đức Thế tôn thì tuệ giác cực kỳ trong sạch 8: hiện hành bất nhị 9, đạt đến vô tướng 10, đứng vào chỗ đứng của các đức Thế tôn 11, thể hiện tính bình đẳng của các Ngài, đến chỗ không còn chướng ngại 12, giáo pháp không thể khuynh đảo, tâm thức không bị cản trở, cái được

10 tips och tricks för att lyckas med ert sap-projekt 20 SAPSANYTT 2/2015 De flesta projektledare känner säkert till Cobb’s paradox. Martin Cobb verkade som CIO för sekretariatet för Treasury Board of Canada 1995 då han ställde frågan