Bluetooth Barcode Scanner Model D750
socketmobile.comSERIES 700DURASCANTMBluetooth Barcode ScannerModel D750www.socketmobile.com
TABLE OF CONTENTSPackage Contents 4Product Information 5Scanner Setup 6Charge the Battery 7Optional Charging Accessories 8Powering Scanner On/Off 9Scanning Barcodes 10Bluetooth Connection Modes 11Setup without software application (Basic Mode): Android 13 Apple 14 Windows (Peripherals) 15
TABLE OF CONTENTSSetup using Application Mode: Android or Windows Mobile Device 16 Windows PC 18 Apple iOS 20Unpairing Bluetooth Connection 22Bluetooth Reconnection 23Scanner Status Indicators 24Product Specifications 28Helpful Resources 30Safety, Compliance & Warranty 31-41Battery Warning 36-37Changing the Scanner Settings 41
PACKAGE CONTENTSDuraScanD750LanyardUSB A to USBType-C CableThank you for choosing Socket Mobile!Let’s get started! 2010-2016 Socket Mobile, Inc. All rights reserved. Socket, the Socket logo, andSocketScan are registered trademarks or trademarks of Socket Mobile, Inc. TheBluetooth word mark and logo are registered trademarks of the Bluetooth SIG, Inc.USA, and any use by Socket Mobile, Inc. is under license. All other trademarks andtrade names contained herein may be those of their respective owners.
PRODUCT INFORMATIONScanner headScan Indicator LightProduct labelBluetooth Light (Blue)Battery Light (Green/Yellow/Red)Trigger buttonPower button*Power ConnectorStand AttachmentLanyard EyeletPins forchargingcradleThe D750 has a protection rating of IP54 for dust and water protection. It is alsomade with antimicrobial additives for protection against harmful microbes.*Also used to display the on-screen keyboard in Basic Mode (iOS only).5
SCANNER SETUPAttach the Lanyard (optional)1.2.3.4.Detach the string loop of the tether from the lanyard.Feed the string loop through the eyelet.Pull tight so the string loop is secure.Reattach the string loop to the tether from the lanyard.6
CHARGE THE BATTERY“Beep Beep”Rubber FlapTo openThe scanner must be fully charged before first use. Please allow 6 hoursuninterrupted charging for the initial battery charge.Lift the rubber flap to access the power connector. Yellow/Amber Light Charging Green Light Fully chargedImportant: Charging from a computer USB port is not reliable andnot recommended.7
OPTIONAL CHARGING ACCESSORIESAvailable separately.Charging CradleCharging StandAC Power SupplyInternational AdaptersavailableFor all optional accessories visit our Socket Store.8
POWERING ON/OFFPower buttonPowering On:Powering Off/ Disconnecting:Press and hold down the smallpower button until the Batterylight turns on and the scannerbeeps twice (low-high).Press and hold down the smallpower button until the scannerbeeps twice (high-low) and lightsturn off.The scanner will power off automatically if device is not connected within 5 minutes. Scannerconnected to a device will poweroff within 2 hours if idle/inactive.9
SCANNING BARCODES1D BarcodeAim the scan beam straightacross the entire barcode.2D BarcodeAim at the center.Trigger buttonScanning Barcodes1. Hold the scanner a few inches from the barcode.2. Aim, press and hold the trigger button.By default, the scanner will beep, vibrate, and the scan indicator willflash green to confirm a successful scan.Caution: Do not stare directly into the scanner light beam.10
BLUETOOTH CONNECTION MODESConnect your scanner using one of the following Bluetooth connectionmodes:Bluetooth Connection ProfilesBluetooth ModeDescriptionBasic Mode (HID)(Default)* NO software installation required Connects to most devices Good for barcodes containing small amounts ofdata Scanner interacts with host device like a keyboardHuman InterfaceDevice ProfileFor Android or WindowsApplication Mode Software installation is required(SPP) More efficient and reliable data communicationsfor barcodes containing lots of dataSerial Port Profile If you have an application that supports SocketMobile Scanners this is the mode recommendedForApplication Mode (MFi-SPP) Apple Specific Serial ProfileiOS DevicesMust use with an App developed to work withiOS devicesSoftware installation is requiredIf you have an iOS application that supportsSocket Mobile Scanners this is the mode youwant to use*By default, the scanner is set to Basic Mode (HID).11
BLUETOOTH CONNECTION MODESOperating System Connection rtBluetoothAppleSerialSpecific(MFi Mode)AndroidAndroid 4.0.3 &laterYesYesN/AApple iOSiPod, iPhone, &iPadYesN/AYesWindowsMobileWindows Mobile6.x (SoMo only)YesYesN/AWindows PCWindows 7, 8, 10YesYesN/AMac OSMac OS X 10.4 to10.XMac Books, MacMini, & iMacYesNoN/AOperatingSystems(OS)Note: To switch from one mode to the other you must remove thepairing information from both devices - host computer and the scanner.(see unpairing procedure on page 21)12
BASIC MODEAndroid: Connect Android Device in Basic ModeIn this mode the scanner functions and communicates similar to a keyboard. Therefore, scanner will work with Notes, and any otherapplication that support an active cursor.1. Power on the scanner. Make sure the scanner isdiscoverable (unpaired) The Blue light blinks fast.2. Settings Bluetooth.3. Make sure the device has Bluetooth “On” and scan for devices.4. In the list of found devices, select D750 [xxxxxx]. Tap Pair.5. The scanner will connect to the Android device.6. The scanner will beep once after it has connected.*If you have trouble connecting or pairing with host device, turn hostdevice’s Bluetooh off/on, and/or perform factory reset to the scanner(see page 44).Now you are ready to scan barcodes!13
BASIC MODEApple: Connect to Apple iOS Device or Mac OS Device Basic ModeIn this mode the scanner functions and communicates similar to a keyboard. Therefore, scanner will work with Safari, Notes, and any otherapplication that support an active cursor.1. Power on the scanner. Make sure the scanner isdiscoverable (unpaired). The Blue light blinks fast.2. Start a Bluetooth device search. Settings Bluetooth: Turn on Bluetooth and search for device. Mac OS: Click System Preferences Bluetooth. A Bluetooth devicesearch will begin.3. In the device list, tap on D750 [xxxxxx]. Tap Pair.4. The scanner will connect to the Apple device.5. The scanner will beep once after it has connected.Now you are ready to scan barcodes!To use the virtual keyboard while the scanner is connected, double tap onthe power button. See YouTube video for demonstration.14
APPLICATION MODEConnect Android or Windows Mobile Device:In this mode the scanner functions and communicates similar to a keyboard. Therefore, scanner will work with Notes, and any otherapplication that support an active cursor.1. Power on the scanner and scan this barcode. The scanner will beep3 times. Make sure the scanner is discoverable (unpaired). The bluelight will blink fast.(Scanning this barcode changes the connection mode)2. Turn Bluetooth on for your device. Go to Settings Bluetooth. ABluetooth Devices search will begin.3. Tap Socket D750[xxxxxx] in the list of Devices found. After a fewseconds the “Not Paired” status will change to “Connected” or“Paired” and the scanner blue light will stop blinking and turn solidblue.Now you are ready to scan barcodes!15
APPLICATION MODEConnect Android device in Application Mode using EZ PairInstall Software1. Go to GooglePlay Store, search for “SocketScan ”.2. Download & install. Follow the on screen instructions.Getting Started3. Follow the on screen instructions.4. Tap on screen the ON SCREEN button.5. Tap on screen the 2D SCANNER button.6. Scan the barcode on the device screen. Wait a few seconds. Thescanner will beep 3 times indicating it has accepted the command toconnect to your device.7. When notified of a pairing request, swipe the notification icon down,then tap Pairing request.8. On the next screen, tap Pair.9. The scanner will beep once to indicate connected state and is ready toscan barcodes. Tap Back to close Socket EZ Pair.10.If you are connecting a scanner which is not registered, a scannerregistration icon will appear on top of the screen. Swipe the icon downto open the registration screen. Follow the instructions to registeryour Scanner. Socket Mobile highly recommends that all customersregister their products for future updates, but registration is optional.Now you are ready to scan barcodes!16
APPLICATION MODEConnect Windows PC in Application ModeNote: Make sure you have administrative privileges.1. Download the latest SocketScan 10 software from Socket Mobile’ssupport web page.2. Follow the on-screen instructions to install the software.3. In SocketScan 10 Settings, select an incoming Bluetooth serial COMport.Note: If there is none please click Ports to create at least one newincoming COM port in Bluetooth settings.4. Click Finish.Now you are ready to scan barcodes!17
APPLICATION MODETo pair the scanner with Windows PC using EZ Pair:1. Power on the scanner. Make sure the scanner is available to beconnected to Bluetooth (unpaired).2. Launch SocketScan 10 and click on the SocketScan 10 icon in the tasktray. In the pop-up menu, click Socket EZ Pair.3. Click 2D scanner accordingly.4. Scan the barcode that appears on the screen.5. The PC will automatically try to pair with the scanner. If promptedto allow the pairing, click Yes. If prompted for a passkey, enter 0000(four zeroes).6. After the scanner connects, it will beep once. Close Socket EZ Pair.6a. In Windows 10 if this step can not be done, open the Bluetoothsettings and add and pair the scanner manually.7. If you are connecting a scanner which is not registered, a scannerregistration icon will appear on top of the screen. Follow theinstructions to register your scanner. Socket Mobile highly recommendsthat all customers register their products, but registration is optional.8. The task tray icon will change to indicate the status of theconnection.Now you are ready to scan barcodes.18
APPLICATION MODEConnect Apple iOS device in Application ModePlease check with your scanner application vendor or visitwww.socketmobile.com/appstore to confirm your scanner-enabledapplication supports the scanner.If you are using the scanner with an Apple iOS device and ascanner-enabled Application that does not provide instructions how toconnect your scanner, please use the following steps.1. Power on the scanner. Make sure the scanner is discoverable(unpaired). The Blue light should be blinking fast.2. To change the profile to Application Mode scan this barcode. Thescanner will beep 3 times.Use with iPad, iPod touch, and iPhones.(Scanning this barcode changes the connection mode)3. Turn on Bluetooth on the Apple device. Go to Settings Bluetooth.A Bluetooth Devices search will begin(Continue on page 20)19
APPLICATION MODE4. Tap Socket D750[xxxxxx] in the list of other devices found. After afew seconds the “Not Paired” status will change to “Connected” or“Paired” and the scanner blue LED will stop blinking and turn solidblue.Note: The characters in brackets are the last 6 characters of theBluetooth Address.5. Launch your scanner-enabled Application. The scanner will beep onceindicating that it is connected to the appropriate application.Now you are ready to scan barcodes!20
BLUETOOTH UNPAIRINGNote: This procedure will put the scanner in discoverable mode.Step 1: Unpairing the scanner: Delete the Bluetooth PairingIf the scanner is paired with a device, unpair it before trying toconnect to a different device.a. Power on the scanner.b. Press the trigger button then power button and hold both untilyou hear 3 beeps.The scanner will unpair and automatically power off. The next time youpower on the scanner, it will be discoverable.Step 2: Remove or forget the scanner from the Bluetooth list on thehost device.Important: Both steps above must be done to completethe unpairing.21
BLUETOOTH RECONNECTIONAutomatic ReconnectionsEach time you power on the scanner, it will automatically try toconnect to the last device it was connected to. Make sure the device is in range with Bluetooth turned on. Pressing the trigger button will initiate the attempts to connect. If using Application Mode, make sure the Scanner-enabledApplication is launched or running. If a connection is made, the blue light will stop blinking and turnsolid. If a connection is not made after several attempts, the scanner willemit a long beep (and the blue light will turn off). Press the trigger button to re-initiate the connction process.22
STATUS INDICATORSBattery Chargingwhen pluggedinto PowerSupplyBattery StatusWhen notconnected topower supplyLED ActivityMeaningBlinking YellowCharging the batterySolid GreenBattery is 100% fullLED ActivityMeaningSolid GreenBattery capacity from 100%to 25%Solid YellowBattery capacity from 25%to 10%Solid RedWarning - Battery capacitybelow 10%Blinking RedCharge immediately!The battery level iscritically low. Alternatively,if battery capacity isunknown battery status willblink red until the power isapplied & scanner is fullycharged.23
STATUS INDICATORS (CONTINUED)BluetoothBluetoothScan/ReadScan/ReadLED ActivityMeaningQuick Blinking Blue(2 blinks everysecond)Discoverable - waiting for ahost Bluetooth connection.Slow Blinking Blue(1 blink every second)Attempting to connect toa paired device. Searchingthe last known Host.Note: Will STOP attemptingafter approx. 1 minute.No Light - No ActivityScanner has attempted toconnect and failed. Presstrigger button to try again.Solid BlueScanner ConnectedLED ActivityMeaningBlink Green OnceGood Scan/ReadBlink Red OnceBad Scan/ReadSolid Red - for as longas power button ispressedPower Button PressedQuick Blinking Green(2 blinks everysecond)Scanner is in bootloadermode during firmwareupgrade.24
STATUS INDICATORS (CONTINUED)Beep PatternSound MeaningLow-High TonePower OnHigh-Low TonePower OffHigh-High TonePower Supply detected and scanner startedcharging1 Low BeepScanner has toggled on-screen keyboard orkeyboard toggle feature is enabled (iOS devicesonly)1 BeepScanner connected to device and is ready to scanbarcodes1 BeepData successfully scanned2 Beeps (sametone)Scanner disconnected1 Long BeepScanner gave up searching for a host3 Beeps(escalating tone)Scanner has been reconfigured (the commandscanned successfully)3 Beeps (escalating tone followedby long tone)The command barcode did NOT work! (Verify if thecommand barcode used is valid for your scannerand try again)25
STATUS INDICATORS (CONTINUED)VibrateMeaningVibrateData successfully scannedCommand Barcodes are available on pages 43-46 to modify the LED,beep, and vibrate settings.If you are using a scanner-enabled application, typically theapplication provides settings for LED, beep, and vibrate settings.Configuration SettingsTime after powering on ScannerBluetooth mode0-5 minutesDiscoverable and connectable5 minutesIf connection is not made, scannerpowers off2 hoursIf your scanner is connected butnot used it will power off in 2hours. When trigger button ispressed the timer is reset.26
PRODUCT SPECIFICATIONSSpecificationsD750Dimensions (L x W x H) 5.2” x 1.5” x 1.6” (132.2 x 37.1 x 40.1 mm)Total Mass3.8 oz (108 g)AntimicrobialAntimicrobial additive in all external surfacesBattery:1400 mAh Lithium - Ion BatteryCharge Time:6 HoursBattery Life Per Full Charge:Standby time: over 30 hoursActive Scan Time: 70,000 scans within 9 hours(based on 2 scans every 1 second) or 14,000scans within 16 hours (calculation based on 1scan every 4 seconds)Note: Battery life varies depending onoperating conditions.Bluetooth VersionClass 1 Bluetooth v2.1 EDR with 56 bit dataencryptionWireless Range100 m (330ft) Line of sightScanner Type1D/2D Barcode Omni-directional Imager withhighly visible light27
PRODUCT SPECIFICATIONSSpecificationsD750SymbologiesAll major 1D and 2D barcodesSupportedLanguage Settings(in Basic Mode (HID))English, French, German, SpanishSystems/BatteryChargersRated output: 5.1v, 1.0AAmbient Light:From 0 to 100 000 luxFrom pitch black to direct sun lightOperatingTemperature:-20 to 50 C (-4 to 122 F)Storage Temperature:-40 to 70 C (-40 to 158 F)Relative Humidity:95% at 60 C (140 F) (non-condensing), 4 daysSealing:IP54 (Ingress Protection rating for dust andwater) EN60529Drop Specifications:Multiple 5 ft. drops to concreteTumble Specification:250 cycles at 1.64 ft. (0.5 m) (500 drops),IEC60062-2-3128
HELPFUL RESOURCESTechnical Support & Product : 800-279-1390 1-510-933-3020 (worldwide)Warranty nty-checkerSocket Mobile Developer Program:Learn more at: http://www.socketmobile.com/developersThe User’s Guide (full installation and usage instructions) and CommandBarcodes (Advanced Scanner Configurations) can be download 9
SAFETY AND HANDLING INFORMATIONWARNING: Failure to follow these safety instructions could result infire or other injury or damage to the barcode scanners or otherproperty.Carrying and Handling the DuraScan barcode scanners: The Socket Mobilebarcode scanner contains sensitive components. Do not disassemble,open, crush, bend, deform, puncture, shred, microwave, incinerate,paint, or insert foreign objects into this unit.Do not attempt to disassemble the product. Should your unit needservice, contact Socket Mobile technical support athttps://support.socketmobile.com/Changes or modifications of this product, not expressly approved bySocket Mobile may void the user’s authority to use the equipment.Do not charge the DuraScan barcode scanner using an AC adapter whenoperating the unit outdoors, or in the rain.Operating Temperature - this product is designed for a maximum ambienttemperature of 50 degrees C or 122 degrees F.30
BLUETOOTH DEVICE UNITED STATESFCC ID: LUBD750Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, usesand can radiate radio frequency energy and, if not installed and usedin accordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interferencewill not occur in a particular installation.If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one of thefollowing measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.FCC Caution: To assure continued compliance, any changes ormodifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate this equipment.(Example - use only shielded interface cables when connecting tocomputer or peripheral devices).31
BLUETOOTH DEVICE UNITED STATESFCC Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forthfor an uncontrolled environment. This equipment should be installed andoperated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, includinginterference that may cause undesired operation32
BLUETOOTH DEVICE CANADAIC ID: 2925A-D750This device complies with Industry Canada license exempt RSSstandard(s). Operation is subject t
Connect to Apple iOS Device or Mac OS Device Basic Mode In this mode the scanner functions and communicates similar to a key-board. Therefore, scanner will work with Safari, Notes, and any other application that support an active cursor. 1. Power on the scanner. Make sure the scanner is discoverable (unpaired). The Blue light blinks fast. 2.
KDC270Li 1D Laser Bluetooth Barcode Scanner KDC270Di 1D CCD Bluetooth Barcode Scanner KDC270Ci 2D Imager Bluetooth Barcode Scanner Basic Operation 1. Aim the KDC directly at the barcode and press the SCAN button, ensuring the beam covers the barcode horizontally. 2.
1 unitech MS852B Bluetooth 2D Barcode Scanner User Guide 1.1 How to turn on / turn off the scanner 1.2 Charging the Scanner 1.3 How to pair the scanner with the cradle 1.4 Scanner type 1.5 Operation Mode 1.6 Scan Mode 1.7 Aimer Mode 1.8 Mobile Phone Read Mode 1.9 Bluetooth 1.10 System Reset & Info 1.11 Data & Memory 1.12 Auto Power Off After Idle
2. Is the scanner dirty of are there water droplets on its surface? If the scanner scans the barcode, but you still have to press a key to enter it: 1. You need to program a suffix for the scanner (Enter/Return). If the scanner won't read the barcode at all: 1. Scan the sample barcode. If the scanner reads the sample barcode, check that your .
Automatically scan a barcode when seated in the Charging Dock or Charging Stand. 1. Pair and connect the *2D scanner to your host device prior to placing the scanner in Auto Mode. 2. Scan the barcode to confirure the scanner to operate in Auto Mode. The barcode is included on the bottom of the Charging Dock and Charging Stand.
More to one —several scanner to one receiver If you have 2 scanners: scanner A, scanner B, 1, Plug the receiver to your computer 2, Match for the scanner A: A scan the "Match" Barcode. 3, Unplug the receiver and Plug the receiver again. 4, Match for the scanner B: B scan the "Match" Barcode.
barcode, which will be located at the bottom of almost every page of this manual. The CT10 Barcode Scanner will respond with three beeps (tone descending from high to low), and its LED indicator becomes purple and go off quickly after reading the barcode. Enter Setup For setting scanner parameters, see "Read a Setup Barcode" below.
This wireless barcode scanner base in USB 3.0，It can transmit data in hight-speed。 This wireless barcode scanner have flash-rom，It can save data when the scanner not connect base station or terminal。 It can transmit 150m Hight-performance 1D or 2D scan engine，It can read barcode speedy。
SKILLS OF COUNSELLING MICROSKILL MODEL Kinesics and Focusing are included D. John Antony, OFM, Cap. Anugraha Publications Anugraha (Tamilnadu Capuchin Institute for Counselling, Psychotherapy and Research) Nochiodaipatti Post, Dindigul – 624 003, Tamilnadu, India 2003 . 2 . 3 D. John Antony, OFM.Cap., 2003 Other Books by the Author: 1. Dynamics of Counselling Microskill Model TA & NLP are .
