Bluetooth Barcode Laser Scanner Model D730
socketmobile.comSERIES 700DURASCANTMBluetooth Barcode Laser ScannerModel D730www.socketmobile.com
TABLE OF CONTENTSPackage Contents 4Product Information 5Scanner Setup 6Charge the Battery 7Optional Charging Accessories 8Powering Scanner On/Off 9Scanning Barcodes 10Bluetooth Connection Modes 11Setup without software application (Basic Mode): Android 13 Apple 14 Windows PC 15
TABLE OF CONTENTSSetup using software (Application Mode): Android 16 Apple iOS 18 Windows PC 20Unpairing Bluetooth Connection 22Bluetooth Reconnection of Scanner 23Scanner Status Indicators 24Scanner Specifications 28Helpful Resources 30Safety, Compliance & Warranty 31-40Battery Warning 36-37Advanced Scanner Settings (Command Barcodes) 41Language Settings (Command Barcodes) 45
PACKAGE CONTENTSDuraScanD730LanyardUSB A to USBType-C CableThank you for choosing Socket Mobile!Let’s get started! 2010-2016 Socket Mobile, Inc. All rights reserved. Socket, the Socket logo, andSocketScan are registered trademarks or trademarks of Socket Mobile, Inc. TheBluetooth word mark and logo are registered trademarks of the Bluetooth SIG, Inc.USA, and any use by Socket Mobile, Inc. is under license. All other trademarks andtrade names contained herein may be those of their respective owners.
PRODUCT INFORMATIONScanner HeadScan Indicator Light(Green/Red)Product LabelBluetooth Light (Blue)Battery Light (Green/Yellow/Red)Trigger ButtonPower Button*Power ConnectorStand AttachmentLanyard EyeletChargingPinsThe D730 has a protection rating of IP54 for dust and water resistance. It is alsomade with antimicrobial additives to help provide protection against bacteria.*Also used to display the on-screen keyboard in Basic Mode (iOS only).5
SCANNER SETUPAttach the Lanyard (optional)1.2.3.4.5.Detach the string loop of the tether from the lanyard.Feed the string loop through the eyelet.Pull the tether through the string loop.Pull tight so the string loop is secure.Reattach the string loop’s tether to the lanyard.6
CHARGE THE BATTERYPower AdapterRubber FlapTo openThe scanner must be fully charged before first use. Please allow 6 hoursuninterrupted charging for the initial battery charge.Lift the rubber flap to access the power connector. Blinking Yellow Light Charging Solid Green Light Fully chargedImportant: Charging from a computer USB port is not reliable andnot recommended.7
OPTIONAL CHARGING ACCESSORIESAvailable separately.Charging CradleCharging StandAC Power SupplyInternational Adaptersavailable*Recommended powersupply(1000 mAh - 5.0 volts)For all optional accessories visit our Socket Store.8
POWERING ON/OFFPower buttonPowering On:Powering Off / Disconnecting:Press and hold down the smallpower button until the Batterylight turns on and the scannerbeeps twice (low-high).Press and hold down the smallpower button until the scannerbeeps twice (high-low) and alllights turn off.Scanner will power offautomatically if device is not connected within 5 minutes. Scannerconnected to a device will poweroff within 2 hours if idle/inactive.9
SCANNING BARCODES1D Laser Barcode ScannerAim the scan beamacross the entire barcodeTrigger buttonScanning Barcodes1. Hold the scanner a few inches from the barcode.2. Aim, press and hold the trigger button.By default, the scanner will beep, vibrate, and the scan indicator willflash green to confirm a successful scan.Caution: Do not stare directly into the scanner’s laser beam.10
BLUETOOTH CONNECTION MODESConnect your scanner using one of the following Bluetooth connectionmodes:Bluetooth Connection ProfilesBluetooth ModeDescriptionBasic Mode (HID)(Default)* NO software installation required Connects to most devices Good for barcodes containing small amounts ofdata Scanner interacts with host device like a keyboardHuman InterfaceDevice ProfileFor Android or Windows OS devicesApplication Mode 1. Software installation is required(SPP)2. More efficient and reliable data communicationsfor barcodes containing lots of dataSerial Port Profile 3. If you have an application that supports SocketMobile Scanners, this is the recommended modeFor iOS DevicesApplication Mode 1. Must use with an App developed to work with(MFi-SPP)iOS devices2. Software installation is requiredApple Specific3. If you have an iOS application that supportsSerial ProfileSocket Mobile Scanners this is the mode you wantto use*By default, the scanner is set to Basic Mode (HID).11
BLUETOOTH CONNECTION MODESOS Connection rtBluetoothAppleSerialSpecific(MFi Mode)AndroidAndroid 4.0.3 &laterYesYesN/AApple iOSiPod, iPhone, &iPadYesN/AYesWindows PCWindows 7, 8, 10YesYesN/AMac OSMac OS X 10.4 to10.XMac Books, MacMini, & iMacYesNoN/AOperatingSystems(OS)Note: To switch from one mode to the other, you must remove thepairing information from both devices - host computer and the scanner.(see unpairing procedure on page 22)12
BASIC MODEAndroid: Connect Android Device in Basic ModeIn this mode the scanner functions and communicates similar to a keyboard. Therefore, scanner will work with Notes, and any otherapplication that supports an active cursor.1. Power on the scanner. Make sure the scanner isdiscoverable (unpaired) and the blue light blinks fast.2. Go to Settings Bluetooth.3. Make sure the device’s Bluetooth is turned “On” to scan for devices.4. In the list of found devices, select D700 [xxxxxx]. Tap Pair.5. The scanner will connect to the Android device.6. The scanner will beep once after it has connected.Note: If you have trouble connecting or pairing with host device, turnhost device’s Bluetooth off/on, and/or perform factory reset to thescanner (see page 44).Now you are ready to scan barcodes!To connect to a new device or use a different profile (mode) on thesame device, you must first unpair the scanner (see page 22).13
BASIC MODEApple: Connect Apple iOS Device or Mac OS Device in Basic ModeIn this mode the scanner functions and communicates similar to a keyboard. Therefore, scanner will work with Safari, Notes, and any otherapplication that support an active cursor.1. Power on the scanner. Make sure the scanner isdiscoverable (unpaired). The Blue light blinks fast.2. Start a Bluetooth device search. Settings Bluetooth: Turn on Bluetooth and search for device. Mac OS: Click System Preferences Bluetooth. A Bluetooth devicesearch will begin.3. In the device list, tap on D700 [xxxxxx].4. The scanner will connect to the Apple device.5. The scanner will beep once after it has connected.Now you are ready to scan barcodes!To use the virtual keyboard while the scanner is connected, double tap onthe power button (similar to double clicking a mouse).To connect to a new device or use a different profile (mode) on thesame device, you must first unpair the scanner (see page 22).14
BASIC MODEWindows: Connect Windows PC1. Power on the scanner. Make sure the scanner is discoverable (unpaired).2. Use your computer’s Bluetooth Settings to connect to the scanner.3. Select “Add a device”.4. In the device list, select Socket D700[xxxxxx]. Click Next.5. If a passkey is requested, enter 0000 (four zeroes). Click OK.6. Follow the remaining screens to complete the wizard.Note: On some computers the DuraScan will have to be configured as aperipheral class of device. Please, refer to the Command Sheet Barcodefor details.15
APPLICATION MODEConnect to Android Device:Scanner-enabled app software installation is required.1. Power on the scanner and scan barcode below. The scanner will beep3 times. Make sure the scanner is discoverable (unpaired). The bluelight will blink fast.(Print page to scan. Do not scan on screen.)(Scanning this barcode changes the connection mode)2. Turn your device’s Bluetooth on. Go to Settings Bluetooth. ABluetooth Devices search will begin.3. Select Socket D700[xxxxxx] in the list of Devices found.4. When prompted, tap “Pair”. After a few seconds the “Not Paired” status will change to “Paired”.Note: The characters in brackets are the last six characters of the scanner’s Bluetooth Address.(Continue instructions on page 17)16
APPLICATION MODEConnect to Android device in Application Mode CONTINUED5. Install Software on Androida. Go to GooglePlay Store, search for “SocketScan Keyboard”.b. Download & install. Follow the on-screen instructions.6. Open SocketScan Bluetooth application. Follow the on-screen steps.7. Tap on step 4 and on next screen, select Bluetooth.8. On the list of devices, tap on your appropriate scanner designated byBluetooth address.9. After the scanner connects and is ready for scanning, it will beep once.The scanner’s blue light will stop blinking and turn solid blue.Note: Socket Mobile highly recommends that all customers register theirproducts for future updates. But, registration is optional.Now you are ready to scan barcodes!17
APPLICATION MODEConnect to Apple iOS device in Application ModePlease check with your scanner application vendor or visitwww.socketmobile.com/appstore to confirm your scanner-enabledapplication supports the scanner.If you are using the scanner with an Apple iOS device and ascanner-enabled Application that does not provide instructions how toconnect your scanner, please use the following steps.1. Power on the scanner. Make sure the scanner is discoverable (unpaired).The Blue light should be blinking fast.2. To change the profile to Application Mode scan this barcode. Thescanner will beep 3 times.Use with iPad, iPod touch, and iPhones(Print page to scan. Do not scan on screen.)(Scanning this barcode changes the connection mode)3. Turn on Bluetooth on the Apple device. Go to Settings Bluetooth.A Bluetooth Devices search will begin.(Continue instructions on page 19)18
APPLICATION MODEConnect to Apple iOS device in Application Mode CONTINUED4. Tap Socket D700[xxxxxx] in the list of other devices found. After a fewseconds the “Not Paired” status will change to “Connected” and thescanner blue LED will stop blinking and turn solid blue.Note: The characters in brackets are the last 6 characters of theBluetooth Address.5. Launch your scanner-enabled Application. The scanner will beep onceindicating that it is connected to the appropriate application.Now you are ready to scan barcodes!19
APPLICATION MODEConnect Windows PC in Application ModeNote: Make sure you have administrative privileges.1.2.Turn on the Bluetooth Radio on your PC.Download the latest SocketScan 10 software from Socket Mobile’ssupport web page.3. Follow the on-screen instructions to install the software.4. In SocketScan 10 Settings, select an incoming Bluetooth serial COMport.Note: If there is no “COM,” click on “Ports” to create at least one newincoming COM Port in Bluetooth Settings.5.Click Finish to complete the installation.Pair Scanner with Windows1. Power on the Scanner and scan this barcode.(Print page to scan. Do not scan on screen.)(Scanning this barcode changes the connection mode)2. The DuraScan will beep 3 times.*Make sure the Scanner is discoverable – available to be connected to aBluetooth (Unpaired). The Blue light blinks fast.(CONTINUE INSTRUCTIONS ON PAGE 21)20
APPLICATION MODEPair Scanner with Windows PC CONTINUED3. Use the Bluetooth software on your computer to start a device search.4. Tap Socket D700[xxxxxx]* in the list of Devices found. If prompted for apasskey, enter 0000 (four zeroes).*The characters in brackets are the last 6 characters of the Bluetooth address.5. Follow the remaining screen instructions to complete the process.6. Click on the SocketScan 10 icon in the system tray. In the pop-up menu,click Socket EZ Pair. If the icon does not appear, open SocketScan 10 byclicking on the desktop shortcut.7. Select 1D Scanner and click on the “Bluetooth” Button.8. Select your Scanner in the list.9. After they pair, the computer will connect to your scanner, indicated bya beep. The Scanner will then disconnect, indicated by two beeps. Click“OK”.10. After several seconds, the Scanner will reconnect to the computer,indicated by a beep and the “connected” icon will appear in thesystem tray.11. Click X to close Socket EZ Pair. If you are connecting a scanner which isnot registered, a scanner registration icon will appear. But, registrationis optional.Note: Socket Mobile recommends that all customers register their productsfor future updates.Now you are ready to scan barcodes.21
BLUETOOTH UNPAIRINGNote: This procedure will put the scanner in discoverable mode.Step 1: Unpairing the scanner: Delete the Bluetooth PairingIf the scanner is paired with a device, unpair it before trying toconnect to a different device.a. Power on the scanner.b. Press the trigger button, then presss the power button and hold bothuntil you hear 3 beeps.The scanner will unpair and automatically power off. The next time youpower on the scanner, it will be discoverable.Step 2: Remove and/or forget the scanner from the Bluetooth list onthe host device in Settings Bluetooth.Important: Both steps above must be done to completethe unpairing process.22
BLUETOOTH RECONNECTIONAutomatic ReconnectionsEach time you power on the scanner, it will automatically try toconnect to the last device it was connected to. Make sure the device is in range with Bluetooth turned on. If using Application Mode, make sure the Scanner-enabledapplication is launched or running. If a connection is made, the blue light will stop blinking and turnsolid. If a connection is not made after several attempts, the scanner willemit a long beep (and the blue light will turn off). Press the trigger button again to re-initiate the connection attempts.23
STATUS INDICATORSBattery Chargingwhen pluggedinto PowerSupplyBattery StatusWhen notconnected topower supplyLED ActivityMeaningBlinking YellowCharging the batterySolid GreenBattery is fully chargedLED ActivityMeaningSolid GreenBattery level: 100% to 25%Solid YellowBattery level: 25% to 10%Solid RedWarning - Battery levelbelow 10%Blinking RedCharge immediately!The battery level iscritically low. Alternatively,if battery level isunknown, battery statuswill blink red until thepower is applied & scanneris fully charged.24
STATUS INDICATORS (CONTINUED)BluetoothBluetoothScan/ReadScan/ReadLED ActivityMeaningFast Blinking Blue(2 blinks everysecond)Discoverable - waiting for ahost Bluetooth connection.Slow Blinking Blue(1 blink every second)Attempting to connect to ahost device. Searching forthe last known device.Note: Will STOP attempting after approximately 1minute.No Light - No ActivityScanner has attempted toconnect and failed. Presstrigger button to try again.Solid BlueScanner ConnectedLED ActivityMeaningBlink Green onceGood Scan/ReadBlink Red onceBad Scan/ReadSolid Red - for as longas power button ispressedPower Button PressedQuick Blinking Green(2 blinks everysecond)Scanner is in bootloadermode, used during firmwareupgrade25
STATUS INDICATORS (CONTINUED)Sound PatternSound MeaningLow-High TonePower OnHigh-Low TonePower OffHigh-High ToneScanner detects adequate power supply1 Low Beep(When the power button is double tapped) Scannerhas toggled on-screen keyboard or keyboard togglefeature is enabled. (iOS devices only)1 BeepScanner connected to device and is ready to scanbarcodes1 BeepData successfully scanned2 Beeps (sametone)Scanner disconnected1 Long BeepScanner gave up searching for a host device3 Beeps (escalating tone)Scanner has been reconfigured(the command barcode was scanned successfully)3 Beeps (escalating tone followedby long tone)The command barcode did NOT work! (Verify if thecommand barcode used is valid for your scannerand try again)3 Beeps, followedby 5 beeps)Factory reset barcode was scanned, OR, scannerperformed factory reset26
STATUS INDICATORS (CONTINUED)VibrateMeaningVibrateData successfully scannedCommand Barcodes are available on pages 43-46 to modify the LED,beep, and vibrate settings.If you are using a scanner-enabled application, typically theapplication provides settings for LED, beep, and vibrate notifications.Configuration SettingsTime after powering on ScannerBluetooth mode0-5 minutesDiscoverable and connectable5 minutesIf connection is not made, scannerpowers off2 hoursIf your scanner is connected butnot used it will power off in 2hours. When trigger button ispressed the timer is reset.27
PRODUCT SPECIFICATIONSSpecificationsD730Dimensions (L x W x H) 5.2” x 1.5” x 1.6” (132.2 x 37.1 x 40.1 mm)Total Mass3.8 oz (108 g)AntimicrobialAntimicrobial additive in external surfacesBattery1400 mAh Lithium - Ion BatteryCharge TimeApproximately 6 HoursBattery OperationTime Per Full ChargeStandby time: over 26 hoursActive Scan Time: 90,000 scans within 9 hours(based on 2 scans every 1 second) or 18,000scans within 21 hours (calculation based on 1scan every 4 seconds)Note: Battery operation time varies dependingon operating conditionsBluetooth VersionClass 1 Bluetooth v2.1 EDR with 56 bit dataencryptionWireless Range330ft (100 m) line of sightScanner Type1D barcode scanner (Class 2 laser)28
PRODUCT d EAN (ISBN / EAN-13), Chinese 2 of 5,Codabar, Code 11, Code 128, Code 39, Code93, Discrete 2 of 5, GS1 DataBar (RSS), GS1-128(UCC-128/EAN-128), Interleaved 2 of 5 (ITF-14),MSI, Plessey, UPC/EAN, Matrix 2 of 5, Korean 2of 5SupportedLanguage Settings[in Basic Mode (HID)]English, French, German, SpanishSystems/BatteryChargingRequirementUSB Type 5V 1AAmbient LightFrom 4,800 to 86,000 luxFrom artificial indoor to natural outdoor lightOperatingTemperature-4 to 122 F (-20 to 50 C)Storage Temperature-40 to 158 F (-40 to 70 C)Relative Humidity95% at 140 F (60 C) (non-condensing), 4 daysSealingIP54 (Ingress Protection rating for dust andwater) EN60529Drop SpecificationsMultiple 5 ft. drops to concreteTumble Specification250 cycles at 1.64 ft. (0.5 m) (500 drops),IEC60062-2-3129
HELPFUL RESOURCESTechnical Support & Product : 800-279-1390 1-510-933-3020 (worldwide)Warranty nty-checkerSocket Mobile Developer Program:Learn more at: http://www.socketmobile.com/developersThe User’s Guide (full installation and usage instructions) and CommandBarcodes (Advanced Scanner Configurations) can be download 0
SAFETY AND HANDLING INFORMATIONWARNING: Failure to follow these safety instructions could result infire or other injury or damage to the barcode scanners or otherproperty.Carrying and Handling the DuraScan barcode scanners: The Socket Mobilebarcode scanner contains sensitive components. Do not disassemble,open, crush, bend, deform, puncture, shred, microwave, incinerate,paint, or insert foreign objects into this unit.Do not attempt to disassemble the product. Should your unit needservice, contact Socket Mobile technical support athttps://support.socketmobile.com/Changes or modifications of this product, not expressly approved bySocket Mobile may void the user’s authority to use the equipment.Do not charge the DuraScan barcode scanner using an AC adapter whenoperating the unit outdoors, or in the rain.Operating Temperature - this product is designed for a maximum ambienttemperature of 50 degrees C or 122 degrees F.31
BLUETOOTH DEVICE UNITED STATESFCC ID: T9J-RN41-3Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, usesand can radiate radio frequency energy and, if not installed and usedin accordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interferencewill not occur in a particular installation.If this equipment does cause ha
: Connect Apple iOS Device or Mac OS Device in Basic Mode In this mode the scanner functions and communicates similar to a key-board. Therefore, scanner will work with Safari, Notes, and any other application that support an active cursor. 1. Power on the scanner. Make sure the scanner is discoverable (unpaired). The Blue light blinks fast. 2.
KDC270Li 1D Laser Bluetooth Barcode Scanner KDC270Di 1D CCD Bluetooth Barcode Scanner KDC270Ci 2D Imager Bluetooth Barcode Scanner Basic Operation 1. Aim the KDC directly at the barcode and press the SCAN button, ensuring the beam covers the barcode horizontally. 2.
1 unitech MS852B Bluetooth 2D Barcode Scanner User Guide 1.1 How to turn on / turn off the scanner 1.2 Charging the Scanner 1.3 How to pair the scanner with the cradle 1.4 Scanner type 1.5 Operation Mode 1.6 Scan Mode 1.7 Aimer Mode 1.8 Mobile Phone Read Mode 1.9 Bluetooth 1.10 System Reset & Info 1.11 Data & Memory 1.12 Auto Power Off After Idle
2. Is the scanner dirty of are there water droplets on its surface? If the scanner scans the barcode, but you still have to press a key to enter it: 1. You need to program a suffix for the scanner (Enter/Return). If the scanner won't read the barcode at all: 1. Scan the sample barcode. If the scanner reads the sample barcode, check that your .
Automatically scan a barcode when seated in the Charging Dock or Charging Stand. 1. Pair and connect the *2D scanner to your host device prior to placing the scanner in Auto Mode. 2. Scan the barcode to confirure the scanner to operate in Auto Mode. The barcode is included on the bottom of the Charging Dock and Charging Stand.
More to one —several scanner to one receiver If you have 2 scanners: scanner A, scanner B, 1, Plug the receiver to your computer 2, Match for the scanner A: A scan the "Match" Barcode. 3, Unplug the receiver and Plug the receiver again. 4, Match for the scanner B: B scan the "Match" Barcode.
barcode, which will be located at the bottom of almost every page of this manual. The CT10 Barcode Scanner will respond with three beeps (tone descending from high to low), and its LED indicator becomes purple and go off quickly after reading the barcode. Enter Setup For setting scanner parameters, see "Read a Setup Barcode" below.
This wireless barcode scanner base in USB 3.0，It can transmit data in hight-speed。 This wireless barcode scanner have flash-rom，It can save data when the scanner not connect base station or terminal。 It can transmit 150m Hight-performance 1D or 2D scan engine，It can read barcode speedy。
Barcode-Scanner LS6320E Best.-Nr. 1196333 Bestimmungsgemäße Verwendung Verwenden Sie den Barcode-Scanner zum schnellen und zuverlässigen Lesen gängiger Barcodes, wie z.B. UPC, EAN oder JAN. Die gescannten Codes können Sie sofort am angeschlossenen Computer in Dokumente und Formulare einfügen. Der Barcode-Scanner
