GC Accessories Solutions Guide - Microsoft
GCAccessoriesAccessoriesGCSolutions ck NutGold Seals
Table ofContentsInlet Base Seals. 3Installation Nuts. 4-5Mini-Unions. 5Septa. 6-7Ferrules. 8-9Injection Port Inlet Liners. 10-12Syringes. 13-16Vials. 17-25Filtration. 26-27Column Check Standards. 28Gas Traps and Purifiers. 29Capillary Unions and Splitters. 30Polyimide Resins. 30Sealing O-rings. 30Ferrule Remover Tool Kit. 31Ceramic Scoring Wafers. 31Flame Detector Jet Cleaning Kit. 31Injection Port Cleaning Kit. 31 2012 Phenomenex, Inc. All rights reserved.2PhenomenexlWEB: www.phenomenex.com
Inlet Base SealsnewEasy Seals for Agilent GCs Soft surface eliminates need for washer Minimal torque required to form tight seal Increase column lifetime with tight sealPhenomenex’s Easy Seals make a tight seal without theneed to apply high torque. These seals eliminate the needto use a washer and reduce breakdown and adsorption ofactive compounds, such as acids, bases, and pesticides.Ordering InformationEasy SealsPart No.DescriptionUnitPriceStandard, single groove for splitless applications, 0.8 mm dia. inlet holeAG0-86192/pkEasy Seal Inlet Base Seal, Gold Plated,for Agilent GCsAG0-862010/pkEasy Seal Inlet Base Seal, Gold Plated,for Agilent GCsGold Inlet Base Seals for Agilent GCs Traps non-volatile residues, septum fragments, and other contaminants Exceptional inertnessOrdering InformationGold Inlet Base SealsPart No.DescriptionStandard, single groove for splitless applications, 0.8 mm dia. inlet holeAG0-7518Gold Inlet Base Seal, splitless (single groove), 0.8 mmAG0-7519Gold Inlet Base Seal, splitless (single groove), 0.8 mmHigh Split Flow, cross groove for split applications, 0.8 mm dia. inlet holeAG0-7520Gold Inlet Base Seal, split (double groove/cross), 0.8 mmAG0-7521Gold Inlet Base Seal, split (double groove/cross), 0.8 mmStandard, single groove for splitless applications, 1.2 mm dia. inlet holeAG0-8581Gold Inlet Base Seal, splitless (single groove), 1.2 mmAG0-8582Gold Inlet Base Seal, splitless (single groove), 1.2 mmHigh Split Flow, cross groove for split applications, 1.2 mm dia. inlet holeAG0-8583Gold Inlet Base Seal, split (double groove/cross), 1.2 mmAG0-8584Gold Inlet Base Seal, split (double groove/cross), 1.2 mmReplacement Inlet Seal WashersAG0-8397Inlet Seal Washers Gold Plated, for Agilent GC injection portSimilar to Mfr. 0/pk–12/pkPriceDue to different replacementfrequencies, inlet seal washersare sold separately from inletbase seals.Stainless Steel Inlet Base Seals for Agilent GCs Lower cost alternative Ideal for hydrocarbon analysisOrdering InformationStainless Steel Inlet Base SealsPart No.DescriptionSimilar to Mfr. No.*Standard, single groove for splitless applications, 0.8 mm dia. inlet holeAG0-8393Stainless Steel Inlet Base Seal, splitless (single groove), 0.8 mm18740-20880AG0-8394Stainless Steel Inlet Base Seal, splitless (single groove), 0.8 mm18740-20880High Split Flow, cross groove for split applications, 0.8 mm dia. inlet holeAG0-8395Stainless Steel Inlet Base Seal, split (double groove/cross), 0.8 mm–AG0-8396Stainless Steel Inlet Base Seal, split (double groove/cross), 0.8 mm–Replacement Inlet Seal WashersAG0-7522Inlet Seal Washers, Stainless Steel, for Agilent GC injection lar to but not always anexact equivalent to the originalmanufacturer's product.PhenomenexlWEB: www.phenomenex.com3
Installation NutsCool-Lock NutU.S. Patent No. 8, 062, 516Fast GC Column Installation without the BurnQuick and Easy! Avoid burning your fingers again – cools with the oven Increased reproducibility—locks insertion depth before installation No need for wrench with hand-tightened connections No more Wite-Out , Tipp-Ex , or septa pieces!Part No. AGO-8319Parts for Agilent GC SystemsHow to Select a Cool-Lock Nut for your Agilent GC System1Decide on The Style of Cool-Lock Nut NeededShort Style (AG0-8319)Long Style (AG0-8320)Recommended for use with standard short Recommend for use with standard longstyle ferrules.style ferrules.Also, use for both the inlet and detector configurations on Agilent 6890, 5890, and 7890GC systems (Short ferrules provide a robustseal and typically remain tight over time).Ordering InformationCool-Lock GC Capillary Nut For Agilent GC Systems*Part No.DescriptionAG0-8319Cool-Lock GC Capillary Nut For Use WithShort-Style FerrulesAG0-8320Cool-Lock GC Capillary Nut For Use WithLong-Style FerrulesUniteaPrice2Determine How Many Cool-Lock Nuts Needed Per SystemDetectorNumber of NutsMSFID, ECD, Other12Cool-Lock Nut Installation Gauge for Agilent GC SystemsPart No.DescriptionAG0-8349Cool-Lock Nut Installation GaugeUniteaPriceea* Guaranteed fit for Aglilent 5850, 5890, 6850, 6890, 7890 GC systemsFor Ferrule Selection Guide forCool-Lock Nuts, see p. 8Parts for Shimadzu GC SystemsOrdering InformationCool-Lock GC Capillary Nut For Shimadzu GC Systems**Part No.DescriptionAG0-8419Cool-Lock GC Capillary Nut For Use WithShimadzu GC SystemsUniteaPriceCool-Lock Nut Installation Gauge For Shimadzu GC SystemsPart No.DescriptionUnitAG0-8420Cool-Lock Nut Installation GaugeeaPrice** Guaranteed fit for Shimadzu 2010 and 2014 GC systemsCaution: For safety, please use common sense when handling metal surfaces within the GC oven, including the Cool-Lock Nut. The Cool-Lock Nut is designed to track the GC oven temperatureas close as possible, therefore, when you cool down your GC oven, the Cool-Lock Nut will follow suit because it is related to oven temperature with the fan on. So if the oven is hot enough tocause severe burns, the Cool-Lock Nut will also be hot enough to cause severe burns. If the GC oven fan has turned off and the injection port temperature is still hot, the Cool-Lock Nut willbegin to heat up causing it to be too hot to touch with the bare hand. For any questions regarding use of the Cool-Lock Nut, please contact your local Phenomenex representative.Contact Phenomenex or your local Phenomenex distributor for additional GC products and applications.4PhenomenexlWEB: www.phenomenex.com
Installation NutsStandard Nut For capillary column connections to both Agilentinjectors and GC detectors (not MS)Ordering InformationGC Fittings Interchangeable with original Agilent nutsPart No.DescriptionAG0-5152 Agilent GC Standard Capillary Nut,1/16 in. hex stainless steel, uses shortAgilent ferrules (1.65 mm length)AG0-5153 Agilent GC Deep Well Capillary Nut,1/16 in. hex stainless steel, usesstandard Agilent ferrules (2.4 mmlength) Standard length nut uses short Agilent ferrules (1.65 mm) Extended length (deep well) nut uses standardferrules (2.4 mm)Similar toMfr. No.*5181-8830Unit2/pk5020-82922/pkPrice* Similiar to but not always an exact equivalent to the original manufacturer's product.For quick and accurate GC installation without burning yourfingers, use the Cool-Lock Nut, see p.4Capillary Column Mini-UnionsCapillary Column Mini-Unions High-precision unions for capillary GC columns Connect capillary columns of same or dissimilar sizes Inert and precise glass-lined bore Low dead volumeSelection GuideApplications Connecting similar sized columns or tubing:Select the union with inside diameter large enough to accommodatethe tubing in question. Connecting a guard column to an analytical column Connecting dissimilar sized columns or tubing:Select the union with inside diameter large enough to accommodatethe smaller of the two sizes.Graphite/Vespel Ferrule Mini-Unions 15 % Graphite / 85 % Vespel ferrules, Rated to 350 C Comes with 1 mini-union, 2 nuts, and 5 ferrulesSilTite Mini-Unions Supplied with SilTite ferrules – no more leaks and noneed to re-tighten after installation Recommended for high temperature analysis. Stableabove 450 C. Comes with 1 mini-union, 2 nuts, and 5 ferrules Connecting columns of different selectivities Connecting transfer lines to, e.g., mass spec Repairing a broken column May be used to connect polyimide-coated and metal capillaries,unlike glass unionsOrdering InformationGraphite/Vespel Ferrule Mini-UnionsColumn 1 Column 2 Ferrule Similar to Mfr.ID (mm)ID (mm) ID (mm)No.*0.10-0.25 0.10-0.530.41034310.28-0.35 0.32-0.530.51034320.45-0.53 0.45-0.530.8103433Replacement FerrulesFerrule Similar to Mfr.Column ID (mm)ID .530.8072698SilTite Mini-UnionsColumn 1 Column 2ID (mm)ID (mm)0.10-0.25 0.10-0.530.28-0.35 0.32-0.530.45-0.53 0.45-0.53Replacement FerrulesColumn ID (mm)0.10-0.250.28-0.350.45-0.53Part No.AG0-5160AG0-5161AG0-5162UniteaeaeaPart No.AG0-7033AG0-7034AG0-7035Unit Price10/pk10/pk10/pkFerrule Similar to Mfr.ID (mm)No.*Part 8825UniteaeaeaPricePriceFerrule Similar to Mfr.ID (mm)No.*Part No.Unit Price0.4073470AG0-8759 10/pk0.5073471AG0-8760 10/pk0.8073473AG0-8824 10/pk* Similiar to but not always an exact equivalent to the original manufacturer’s product.PhenomenexlWEB: www.phenomenex.com5
SeptaSilicone Rubber Inlet Septa Advanced silicone formulations reduce coringand increase septum lifetime Enhanced durability and re-sealing capabilitiesHow to choose the correct Septathe correct size for your GC inlet1 Find(See Septa Sizes chart)the appropriate temperature stability at or2 Chooseabove the maximum temperature of your inletusing narrow gauge needles, select an option with3 IfGuideRighthole Septa Sizes by GC InstrumentManufacturerInstrument ModelSepta DiameterAgilent (HP) .5850, 5880, 5890, 6850, 6890, 78905700 series, 5880AAll7/16 in. (11 mm)3/8 in. (9.5 mm)3/8 in. (9.5 mm)AntekThermo Scientific FinniganFinnigan/TremeticsFisons/Carlo ErbaGOW-MAC HNUPerkinElmer Shimadzu Tracor Varian 96009000, 95008000 SeriesAllPortable GCSigma series, 900, 9900, 8000, AutosamplerAll220, 222540550, 560Packed column injectorsSPI3700 / Vista capillary injectorsSaturn GC/MSOrdering InformationSilicone Rubber SeptaPart No.DescriptionPhenoGrey 3/8 in. (9.5 mm) DiameterAG0-4686PhenoGrey-250 Injector SeptaAG0-4687PhenoGrey-250 Injector SeptaPhenoBlue 3/8 in. (9.5 mm) DiameterAG0-4688PhenoBlue-300 Injector SeptaAG0-4689PhenoBlue-300 Injector SeptaPhenoRed 3/8 in. (9.5 mm) DiameterAG0-4690PhenoRed-400 Injector SeptaAG0-4691PhenoRed-400 Injector SeptaPhenoGreen 3/8 in. (9.5 mm) DiameterAG0-8572PhenoGreen-400 Injector SeptaInjector Septa Plugs High temperature silicone6PhenomenexlWEB: www.phenomenex.com3/8 in. (9.5 mm)1/2 in. (12.7 mm)21/32 in. (17 mm)3/8 in. (9.5 mm)3/8 in. (9.5 mm)7/16 in. (11 mm)plug1/2 in. (12.7 mm)11/24 in. (11.5 mm)3/8 in. (9.5 mm)3/8 in. (9.5 mm)7/16 in. (11 mm)7/16 in. (11 mm) or11/24 in. (11.5 TypeTemperatureStabilityDurabilityPhenoGrey -250250 ºCBestPhenoBlue -300350 ºCBetterPhenoRed -400400 ºCGoodPhenoGreen -400400 ºCGoodOrdering InformationGuideRight Injection Hole SeptaPart No.DescriptionPhenoGreen 3/8 in. (9.5 mm) Diameter 400 CAG0-7874PhenoGreen 400 Injector SeptaPhenoRed 3/8 in. (9.5 mm) Diameter 400 CAG0-7916PhenoRed 400 Injector SeptaPhenoGreen 7/16 in. (11 mm) Diameter 400 CAG0-7875PhenoGreen 400 Injector SeptaPhenoRed 7/16 in. (11 mm) Diameter 400 CAG0-7917PhenoRed 400 Injector SeptaPart No.DescriptionPhenoGrey 7/16 in. (11 mm) DiameterAG0-4692PhenoGrey-250 Injector SeptaAG0-4693PhenoGrey-250 Injector SeptaPhenoBlue 7/16 in. (11 mm) DiameterAG0-4694PhenoBlue-300 Injector SeptaAG0-4695PhenoBlue-300 Injector SeptaPhenoRed 7/16 in. (11 mm) DiameterAG0-4696PhenoRed-400 Injector SeptaAG0-4697PhenoRed-400 Injector SeptaPhenoGreen 7/16 in. (11 mm) DiameterAG0-8573PhenoGreen-400 Injector SeptaOrdering InformationShimadzu Injector Septa PlugPart No.DescriptionAG0-7517Septa Plug for Shimadzu Injectors(9A, 14, 15A, 16, 17A, 2010) Rated to 350 CAG0-8802Septa BTO Plugs, Rated to 400 CAvailable withGuideRight hole 0/pk100/pk50/pk100/pk50/pkUnit50/pk50/pkPrice
SeptaMerlin Microseal Septum Improves chromatographic performance andquantitative results by reducing bleed and ghost peaks Improves reliability and performance during extendedautomated runs Thousands of injections before seal replacement Save time changing septa, instrument downtime andtroubleshootingThe Merlin Microseal Septum is a long-life replacement for thestandard septum on the capillary inlet or the purged-packedinlet of Agilent GC systems.O-ring seals needle during injectionThe Microseal is a patented inlet assembly that provides twodistinct sealing mechanisms. The first is a double O-ring sealaround the syringe that ensures gas leak integrity during timeof injection. There is no traditional septum to core or flake,which can cause bleeding and ghost peaks, and less force isrequired for the user to make a manual injecti
** Guaranteed fit for Shimadzu 2010 and 2014 GC systems Decide on The Style of Cool-Lock Nut Needed Short Style (AG0-8319) Long Style (AG0-8320) Recommended for use with standard short style ferrules. Recommend for use with standard long style ferrules. Also, use for both the inlet and detector con-figurations on Agilent 6890, 5890, and 7890
ACCESSORIES FOR THE HUMMER H1, H2, SUT, AND H3 HUMMER H1 StainlessSteelAccessories.37-39 GENUINE Commercial Truck & Vehicle Accessories Hummer H2, H3 & SUT Accessories Hummer H1 Accessories Dodge Viper Accessories Truck & Auto Accessories Chevy Avalanche Accessories Toyota FJ Cruiser Accessories TO DISCOVER THE MANY PRODUCTS
o Microsoft Outlook 2000 o Microsoft Outlook 2002 o Microsoft Outlook 2003 o Microsoft Outlook 2007 o Microsoft Outlook 2010 o Microsoft Outlook 2013 o Microsoft Outlook 98 o Microsoft PowerPoint 2000 o Microsoft PowerPoint 2002 – Normal User o Microsoft PowerPoint 2002 – Power User o Microsoft PowerPoint 2002 – Whole Test
Business Ready Enhancement Plan for Microsoft Dynamics Customer FAQ Updated January 2011 The Business Ready Enhancement Plan for Microsoft Dynamics is a maintenance plan available to customers of Microsoft Dynamics AX, Microsoft C5, Microsoft Dynamics CRM, Microsoft Dynamics GP, Microsoft Dynamics NAV, Microsoft Dynamics SL, Microsoft Dynamics POS, and Microsoft Dynamics RMS, and
Microsoft, Microsoft Dynamics, logo systemu Microsoft Dynamics, Microsoft BizTalk Server, program Microsoft Excel, Microsoft.NET Framework, program Microsoft Outlook, Microsoft SharePoint Foundation 2010, Microsoft SharePoint Ser
Operations, on-premises, Microsoft Dynamics NAV, Microsoft Dynamics GP, Microsoft Dynamics SL, Microsoft Dynamics AX 2012 or prior versions, or Microsoft Dynamics CRM 2016 or prior versions. This guide also does not apply to the Microsoft Dynamic CRM Online or Microsoft Dynamics AX online services. This guide is not intended to influence the .
Veeam Backup for Microsoft Office 365 is a comprehensive solution that allows you to back up and restore data of your Microsoft Offic e 365 organizations, including Microsoft Exchange, Microsoft SharePoint, Microsoft OneDrive for Business and Microsoft Teams data, as well as data of on -premises Microsoft Exchange and on -premises
Microsoft Dynamics 365 for Operations on-premises, Microsoft Dynamics NAV, Microsoft Dynamics GP, Microsoft Dynamics SL, Microsoft Dynamics AX 2012 or prior versions, or Microsoft Dynamics CRM 2016 or prior versions. This guide is not intended to influence the choice of Microsoft Dynamics products and services or provide technical specification.
Operations on-premises, Microsoft Dynamics NAV, Microsoft Dynamics GP, Microsoft Dynamics SL, Microsoft Dynamics AX 2012 or prior versions, or Microsoft Dynamics CRM 2016 or prior versions. This guide also does not apply to the Microsoft Dynamic CRM Online or Microsoft Dynamics AX online services.
