ACCES SORIES MOTO FROM RACE TO ROAD BIKES

3y ago
13 Views
2 Downloads
8.35 MB
35 Pages
Last View : 2m ago
Last Download : 2m ago
Upload by : Sasha Niles
Transcription

ACCESSORIESMOTOBIKES2015FROM RACE TO ROAD

MOTORBIKESPERFORMANCESTYLEAND COMFORT02Out of Aprilia research and experience an original range of accessories is born, created to make the aesthetics and comfortof each model even more inimitable. From carbon components inspired by racing bikes, to billet components and technicalbags for free time and travel: a universe of ideas, details and made-to-fit attentiveness to every biker. Just like the apparelcollection: a complete line of clothing, helmets and other exclusive products that express the same incomparable attentionto quality, technology and design. On the road, the track or even offroad, at any time and in any situation: always in Apriliastyle, unique anywhere in the world.RSV4 FACTORY ABSRSV4 R ABSTUONO V4 R ABSCAPONORD 1200DORSODURO 1200 ABSDORSODURO 750SHIVER 750MANA GT 850RS4 50 / 125SRV 850RXV SXV RXV 450 / 550RSV4FACTORYABSRSV4 RABSTUONOV4 RABSCAPONORD1200DORSODURO1200ABSDORSODURO 750DORSODURO750 RXVSXVMXV

RSV4 FACTORY ABS / RSV4 R ABSRSV4FACTORYABS04RSV4 RABSRSV4FACTORYABSRSV4 RABS05

RSV4 FACTORY ABS / RSV4 R ABSRSV4FACTORYABSRSV4 RABSAKRAPOVIC HOMOLOGATED SLIP-ON EXHAUST KIT INCLUSIVE OF RACING HEADERCARBONTITANIUMB043763B043764RSV4 FACTORY ABS / RSV4 R ABSADJUSTABLE ALUMINIUM FOOTPEG KIT2S000080 Made entirely from billet aluminium Adjustable with 9 different footpeg settings Fine adjustment of gear and brake levers With provision for standard brake light switch and for inverted gear lever installation For track use only The kit consists of a hexagonal cross section carbon fibre or titanium silencer with extractable Db-killer, titanium header with catalytic converter, and titanium racing header with nocatalytic converter In the configuration with the Db-killer installed and the header with catalytic converter, the exhaust is homologated compliant with Euro3 sections 5 and 9 (emissionsand noise) and may be used on public roads without modifying carburetion parameters Fits onto the standard exhaust header and fastened to the passenger footrest with a specificbracket An aluminium bracket is available separately for fastening the silencer to the bike without the passenger footrest When replacing the header with the component supplied in thekit with no catalytic converter and removing the Db-killer, the exhaust system is considered a racing system and loses homologation, and can no longer be used on the public road.In this case, the specific ECU mapping - included with the kit on request - must be installed using the same procedure as used for the complete Evo Racing exhaustRSV4 RABS0607RACING CHAINALUMINIUM BRACKET KITFOR SLIP-ON EXHAUST Aluminium silencer mounting bracket For a sportier configuration with no passenger footpegs For track use onlyRACING accessory: intended solely for motorcycles used oncircuits closed to public traffic and may not be used for anyother purpose.RSV4FACTORYABS896180REVERSE GEAR LEVER KIT895408SPROCKET IN HARD ANODIZED ERGALFOR RACING CHAINZ 40Z 42896164896165PINIONFOR RACING CHAINZ 15Z 16896167896168 Racing final drive kit for RSV4, consisting of: Regina Racing ORNV6W chain with 520 pitch (used by the major Superstock worldchampionship teams) Hard anodised Ergal sprocket (40 or 42 teeth) Lightweight steel pinion (15 or 16 teeth) For track use onlyThe following possible combinations may be installed to reduce rotating masses (allcomponents are lighter than their standard counterparts, the whole kit saves weight by850 g) and improve acceleration:- chain, sprocket with 40 teeth and pinion with 16 teeth (drive ratio 2.500 - same as standard)- chain, sprocket with 42 teeth and pinion with 16 teeth (drive ratio 2.625 - shorter than standard)- chain, sprocket with 40 teeth and pinion with 15 teeth (drive ratio 2.667 - even shorter)- chain, sprocket with 42 teeth and pinion with 15 teeth (drive ratio 2.800 - even shorter)B043548 Mechanical element that reverses the shift gears mode, in order to have abetter driving performance on the exit of the turn when racing on the tracks.ATTENTION: THIS COMBINATION REQUIRES THE USEOF THE 520 PITCH RACING CHAIN - THE SPROCKETAND PINION CANNOT BE USED WITH THE STANDARDCHAIN OR IN COMBINATIONS WITH THE STANDARDSPROCKET AND PINIONN.B.: IT IS RECOMMENDED THAT THE FINAL DRIVECOMPONENTS ARE REPLACED EVERY 4000 KM OREARLIER IF SIGNS OF EXCESSIVE WEAR ARE NOTED(DEPENDING ON RIDING STYLE AND CONDITIONS)

RSV4 FACTORY ABS / RSV4 R ABSRSV4FACTORYABSRSV4 RABSRACE ECU KIT FOR RSV4896309 Dedicated engine control unit for track use, pre-programmed with racing ECUmappings For use on bikes fitted with aftermarket exhaust systems (completesystems or slip-on muffler) NOT supplied by Aprilia Recommended for use incombination with exhausts with no catalytic converter, with or without Db-killer Dedicated ECU mapping (with three R/S/T settings) to exploit the full potential ofthe exhaust Unlike the standard ECU mapping, all three R, S and T maps deliverunlimited power - the S ECU mapping offers smoother response, whereas the R ECUmapping limits torque in the first three gears After installation of ECU by an authorisedAprilia service centre, later updates may be downloaded and installed For track useonlyLICENSE PLATE HOLE CAP KIT In laser-cut steel With laser-cut logos Permits removal of license plate for track use For track use only895322RSV4 FACTORY ABS / RSV4 R ABSRACING SEMI-HANDLEBARS KIT RSV4 APRCB043579 With collars machined from billet aluminium For a more effective riding position forsports use For track use onlyCAP KIT FOR MIRROR MOUNT HOLES895320 In billet aluminium With laser-cut logos Permits removal of mirrors for track use For track use onlyRSV4FACTORYABSRSV4 RABS0809ADJUSTABLE LICENSE PLATE MOUNTING KIT895323 In laser-cut steel With white LED license plate light Gives the bike a sleeker and sportier look For track use onlyCRASH PADS KIT FOR “FACTORY” VERSIONB046132 Machined from solid nylon Mountings in billet aluminium Distinctive triangular design For “Factory” version onlyHANDLEBAR COUNTERWEIGHT KIT In billet aluminium With black nylon cap and laser-cut logos Design with concealed fastener screwCRASH PADS KIT FOR “R” VERSION896353 Machined from solid nylon Mountings in billet aluminium Distinctive triangular design For “R” version only895326STAND PIN KIT In billet aluminium Laser-cut logos Protective nylon crash pad Design with concealed fastener screw895321

RSV4 FACTORY ABS / RSV4 R ABSRSV4FACTORYABSEXTRA LARGE WINDSHIELD KIT894862 Taller windshield in thermoformed polycarbonate Tinted For track use onlyRSV4 FACTORY ABS / RSV4 R ABSÖHLINS TTX36 REAR SHOCK ABSORBER894912 Created especially for the RSV4 Fully adjustable Equippable with linear sensors Head and calliper mounting bracket made entirely from billet aluminiumRSV4 RABSÖHLINS FACTORY REAR SHOCK ABSORBER895334 Öhlins rear shock absorber (OEM part on “Factory” version), available as an accessoryfor the R version Maximum performance on the road with true racing looks. Replaces the standard unit without modification to the suspension mounts and linkage010RSV4FACTORYABSRSV4 RABS011ÖHLINS FACTORY STEERING DAMPER894913 Öhlins steering damper (OEM part on “Factory” version), available as an accessory forthe R version Maximum performance on the road with true racing looks Replaces the standard unit without modification to the frame mountsALUMINIUM FRONT WHEEL RIMSBLACK FORGED REAR WHEELS895409895410 Made from forged aluminium alloy Engineered using advanced simulation andmodelling tools such as FEM analysis, these wheel rims offer a weight saving over thestandard (cast)* components while still ensuring unrivalled robustness The resulting reduction in gyroscopic effect and unsprung weight translates tounparalleled responsiveness and agility Standard on RSV4 FactoryÖHLINS FACTORY FRONT FORK KIT RSV APRC899328 Includes Öhlins OEM front fork on “Factory” version and the lower steering plate(the upper steering plate on the bike is already compatible with this Öhlins fork) Can be mounted without having to replace the existing brake disks, brake calipersand rims

RSV4 FACTORY ABS / RSV4 R ABSRSV4FACTORYABSRSV4 RABSFRONT CARBON MUDGUARD KIT895394 Component from polished carbon fibre (with matte finish) Fits onto the standardcalliper mounting brackets for sportier looks evocative of the Factory version Weight saving Homologated for road use Front carbon mudguard for USA: code 896184REAR CARBON MUDGUARD KIT895395RSV4 FACTORY ABS / RSV4 R ABSTANK COVERB046054 In technical fabric with carbon effect inserts With fasteners for small and large tank bags Tested, approved resistance to oil, fuel and UV light. Ensures ergonomics and stabilityeven at higher speeds Features a hole for refuelling without removing the cover With contoured electrostatic tank protector Component from polished carbon fibre (with matte finish) Fits onto the standardswingarm for sportier looks evocative of the Factory version Weight saving Homologated for road useRSV4FACTORYABSRSV4 RABS012013RH CARBON SIDE FAIRING KITLH CARBON SIDE FAIRING KIT895396895397CARBON GUARD KIT FOR STANDARD EXHAUST Component made from varnished (matte finish) carbon fibre Used to replace the plastic side fairings to give the bike sportier looks evocative of theFactory version Weight saving Homologated for road use In 200g carbon fibre with an inner heat insulation layer Fits onto standard exhaust Sportier looks and reduced weightCARBON EXTRACTOR KITCARBON HEEL GUARD KIT894871 Component made from triple layer composite (carbon/kevlar/carbon) with radiusedcorners and matte finish varnish coating Supplied with fastener hardware for installation(if necessary), personalised decals if applicable and multilingual instruction manual Homologated for road use In 200g carbon fibre Less weight and sportier looks Also compatible with optional adjustable footpegs895319SMALL TANK BAGLARGE TANK BAG894868897049895318MOTORCYCLE COVER894866 Indoor cover In breathable Lycra Two-tone black and red colour scheme With Aprilia and RSV4 logos In technical fabric with carbon effect inserts With fasteners for tank cover Tested, approved resistance to oil, fuel and UV light. Ensures ergonomics and stabilityeven at higher speeds The small (3 litre) and large (9 litre) tank bags are secured to thetank cover with quick release buckles With upper map pocket and rain hood A handle and shoulder strap make the small bag easy to carry

TUONO V4 R ABSTUONOV4 RABSTUONOV4 RABS014015

TUONO V4 R ABSAKRAPOVIC EVO1 COMPLETE RACING EXHAUST SYSTEMCARBONTITANIUM894732897318 Complete Akrapovic racing exhaust system for track use made entirely from titanium with oval muffler in carbon or titanium The cylinder head mating flanges are machined from solidbillet aluminium while the silencer mounting brackets are in carbon fibre The whole system weighs less than 5 kg and delivers a healthy increase in torque above 4,500 rpm, which isparticularly notable from 4,500 to 8,000 rpm, significantly improving acceleration out of turns Includes dedicated ECU mapping (with three R/S/T settings) to exploit the full potential ofthe exhaust Unlike the standard ECU mapping, all three R, S and T maps deliver unlimited power - the S ECU mapping offers smoother response, whereas the R mapping limits torquein the first three gears For track use onlyTUONO V4 R ABSALUMINIUM BRACKET KIT FOR COMPLETERACING EVO EXHAUST895430ALUMINIUM BRACKET KIT FOR SLIP-ON EXHAUST896180 Aluminium silencer mounting bracket For a sportier configuration with no passenger footpegs For track use only Aluminium silencer mounting bracket For track use onlyTUONOV4 RABSTUONOV4 RABS016017RACE ECU KIT896309 Dedicated engine control unit for track use, pre-programmed with racing ECUmappings For use on bikes fitted with aftermarket exhaust systems (completesystems or slip-on muffler) NOT supplied by Aprilia Recommended for use incombination with exhausts with no catalytic converter, with or without Db-killer Dedicated ECU mapping (with three R/S/T settings) to exploit the full potential ofthe exhaust Unlike the standard ECU mapping, all three R, S and T maps deliverunlimited power - the S ECU mapping offers smoother response, whereas the R ECUmapping limits torque in the first three gears After installation of ECU by an authorisedAprilia service centre, later updates may be downloaded and installed For track useonlyAKRAPOVIC HOMOLOGATED SLIP-ON EXHAUST KIT INCLUSIVE OF RACING HEADERCARBONTITANIUMREVERSE GEAR LEVER KITB043548 Mechanical element that reverses the shift gears mode, in order to have abetter driving performance on the exit of the turn when racing on the tracks.B043763B043764 The kit consists of a hexagonal cross section carbon fibre or titanium silencer with extractable Db-killer, titanium header with catalytic converter, and titanium racing header with nocatalytic converter In the configuration with the Db-killer installed and the header with catalytic converter, the exhaust is homologated compliant with Euro3 sections 5 and 9 (emissionsand noise) and may be used on public roads without modifying carburetion parameters Fits onto the standard exhaust header and fastened to the passenger footrest with a specificbracket An aluminium bracket is available separately for fastening the silencer to the bike without the passenger footrest When replacing the header with the component supplied in thekit with no catalytic converter and removing the Db-killer, the exhaust system is considered a racing system and loses homologation, and can no longer be used on the public road.In this case, the specific ECU mapping - included with the kit on request - must be installed using the same procedure as used for the complete Evo Racing exhaustRACING accessory: intended solely for motorcycles used oncircuits closed to public traffic and may not be used for anyother purpose.ADJUSTABLE ALUMINIUM FOOTPEG KIT2S000080 Made entirely from billet aluminium Adjustable with 9 different footpeg settings Fine adjustment of gear and brake levers With provision for standard brake light switch and for inverted gear lever installation For track use only

TUONO V4 R ABSRACING CHAINTUONOV4 RABS895408SPROCKET IN HARD ANODIZED ERGALFOR RACING CHAINZ 40Z 42896164896165PINIONFOR RACING CHAINZ 15Z 16896167896168 Racing final drive kit for TUONO V4, consisting of: Regina Racing ORNV6W chain with 520 pitch (used by the major Superstock worldchampionship teams) Hard anodised Ergal sprocket (40 or 42 teeth) Lightweight steel pinion (15 or 16 teeth) For track use onlyThe following possible combinations may be installed to reduce rotating masses (allcomponents are lighter than their standard counterparts, the whole kit saves weight by850 g) and improve acceleration:- chain, sprocket with 40 teeth and pinion with 16 teeth (drive ratio 2.500)- chain, sprocket with 42 teeth and pinion with 16 teeth (drive ratio 2.625)- chain, sprocket with 40 teeth and pinion with 15 teeth (drive ratio 2.667)- chain, sprocket with 42 teeth and pinion with 15 teeth (drive ratio 2.800)TUONO V4 R ABSAIR FILTER KITB044225 Air filter from RSV4 Factory which allows a greater flow of air to the engine,giving a significantly better performanceÖHLINS STEERING DAMPER894913 Maximised performance on the road and track with genuine racing looks Replaces the standard unit without modification to the frame mountsTUONOV4 RABS018019ÖHLINS TTX36 REAR SHOCK ABSORBER894912 Fully adjustable Equippable with linear sensors Head and calliper mounting bracket made entirely from billet aluminiumATTENTION: THIS COMBINATION REQUIRES THE USEOF THE 520 PITCH RACING CHAIN - THE SPROCKETAND PINION CANNOT BE USED WITH THE STANDARDCHAIN OR IN COMBINATIONS WITH THE STANDARDSPROCKET AND PINIONALUMINIUM FRONT WHEEL RIMSBLACK FORGED REAR WHEELS895409895410ÖHLINS REAR SHOCK ABSORBER895334 Maximised performance on the road and track with genuine racing looks Replaces the standard unit without modification to the suspension mounts and linkageN.B.: IT IS RECOMMENDED THAT THE FINAL DRIVECOMPONENTS ARE REPLACED EVERY 4000 KM OREARLIER IF SIGNS OF EXCESSIVE WEAR ARE NOTED(DEPENDING ON RIDING STYLE AND CONDITIONS) Made from forged aluminium alloy Engineered using advanced simulation andmodelling tools such as FEM analysis, these wheel rims offer a weight saving over thestandard components while still ensuring unrivalled robustness The resulting reductionin gyroscopic effect and unsprung weight translates to unparalleled responsivenessand agilityÖHLINS FRONT FORK KIT899328 Includes the Öhlins FG616 front fork, fitted as standard, and the lower steering yoke(the upper yoke is already compatible with the Öhlins fork) Installable without having toreplace the existing brake discs, callipers and rims

TUONO V4 R ABSADJUSTABLE LICENSE PLATE MOUNTING KIT895323 In laser-cut steel With white LED license plate light Gives the bike a sleeker and sportier look For track use onlyLICENSE PLATE HOLE CAP KIT895322 In laser-cut steel With laser-cut logos Permits removal of license plate for track use For track use onlyTUONO V4 R ABSFRONT CARBON MUDGUARD KIT895394 Component made from varnished (matte finish) carbon fibre Weight saving Homologated for road useREAR CARBON MUDGUARD KIT895395 Component made from varnished (matte finish) carbon fibre Weight saving Homologated for road useTUONOV4 RABSTUONOV4 RABS020021FLYSCREEN KIT It fits in a harmoniously and consistently with the lines of the vehicle Complete with lid cover and support columns of aluminum billet Easy to install, is DOT approved.B044143SPORT GEL SADDLEB044750 The saddle is equipped with a gel insert that increases the feeling of the riderwith his motorcycle, ensuring maximum comfort in all driving conditionsRH CARBON SIDE FAIRING KITLH CARBON SIDE FAIRING KIT895396895397 Component made from varnished (matte finish) carbon fibre Used to replace the plastic side fairings to give the bike sportier looks Weight saving Homologated for road useCRASH PADS KIT They protect the vehicle from damage to the frame in case of a fall or slideB044095CARBON HEEL GUARD KIT In 200 g carbon fibre Less weight and sportier looks Also compatible with optional adjustable footpegs895318

TUONO V4 R ABSTANK COVERB046054 In technical fabric with carbon effect inserts With fasteners for small and large tank bags Tested, approved resistance to oil, fuel and UV light. Ensures ergonomics and stability even at higher speeds Features a hole for refuelling without removing the cover With contoured electrostatic tank protectorCAPONORD 1200CAPONORD1200TUONOV4 RABSCAPONORD1200022023SMALL TANK BAGLARGE TANK BAG894868897049 In technical fabric with carbon effect inserts With fasteners for tank cover Tested, approved resistance to oil, fuel and UV light.Ensures ergonomics and stability even at higher speeds The small (3 litre) and large(9 litre) tank bags are secured to the tank cover with quick release buckles With upper map pocket and rain hood A handle and shoulder strap make the small bag easy to carry

CAPONORD 1200APRILIA SLIP-ON EURO 3 EXHAUST KIT BY ARROW2S000043 Titanium slip-on silencer with carbon end-caps Sporty looks, spine-tingling sound, maximum performance on the road Euro 3 compliantCAPONORD 1200CARBON FRONT MUDGUARD895394 Component is made of polished carbon fiber (with matt finish) Fits onto the standard caliper mounting brackets for sportier looksSPORT GEL LOWER SEAT2S000042 Low seat made with gel inserts for increased rider comfort thanks to its reduced height Provides better support for the rider’s feet on the groundCAPONORD1200024CAPONORD1200PERFORMANCE OPTIMIZER KITCLUTCH HOUSING GUARD KIT The Performance Optimizer

MANA GT 850 RS4 125 RS4 50 SRV 850 RXV SXV MXV MOTOR BIKES PERFORMANCE STYLE AND COMFORT Out of Aprilia research and experience an original range of accessories is born, created to make the aesthetics and comfort of each model even more inimitable. From carbon components inspired by racing bikes, to billet components and technical

Related Documents:

2018 Hoey Moey Coffs Harbour Stadium MX All Classes Overalls Update2 PRO OPEN Pos. No. Rider Moto 1 Moto 2 Moto 3 Moto 4 Moto 5 Points Bonus SpMake onsers 1 6 WILSON, JAY 1 1 3 100 0 YAM YAMALUBE YAMAHA 2 199 CRAWFORD, NATHAN 3 3 1 95 0 YAM SERCO YAMAHA ROCKWELL 3 4 CLOUT, LUKE 4 2 2 92 0 KTM

MANA GT 850 RS4 125 RS4 50 SRV 850 RXV SXV MXV MOTOR BIKES PERFORMANCE STYLE AND COMFORT Out of Aprilia research and experience an original range of accessories is born, created to make the aesthetics and comfort of each model even more inimitable. From carbon components inspired by racing bikes, to billet components and technical

Robert Shapiro B ENEVOLENT M AGIC & L IVING P RAYER R OBERT S HAPIRO LIGHT TECHNOLOGY . Explorer Race series The Explorer Race ETs and the Explorer Race Explorer Race: Origins and the Next 50 Years Explorer Race: Creators and Friends Explorer Race: Particle Personalities The Explorer Race and Beyond Explorer Race: The Council of Creators

16 ’ C 1 e s t p e r s o Accès Studio Accès Studio Unit 1 (pp. 4–5) can be used before this unit to review greetings. Accès Studio Unit 2 (pp. 6–7) can be used with this unit to review numbers and ages. Accès Studio Unit 5 (pp. 12–13) can be used with this unit to review the defi nite article, in the context of

Satisfacció dels titulats amb els estudis i UVic-UCC 89 e. Nota d'accés i de tall 8. RENDIMENT ACADÈMIC. CURS 2015-16 e.1. Nombre d'estudiants de nou accés per nota d'accés 42 a. Taxes. GRAUS: e.2. Comparativa de la nota d'accés UVic-UCC i Catalunya (PAU i assimilats - vies

S’il vous plaît se référer à un service usine notice de démontage manuel pour votre moto / informations d’installation. Typiquement, vous devez garder toutes les vis d’usine, matériel et grilles à jour votre moto à un système de Kicker. Les schémas suivants illustrent la façon d’installer les haut-parleurs PS5250 dans une moto

yoshimura suzuki factory racing 2017 i hjc helmets catalog moto america supercross philipp Öttl schedl gp racing aron canet estrella galicia 0.0 . advanced pim plus shell construction 1 emergency release kit 2 glasses

TANK DESIGN & DETAILING Introduction The API 650 standard is designed to provide the petroleum industry with tanks of adequate safety and reasonable economy for use in the storage of petroleum, petroleum products, and other liquid products commonly handled and stored by the various branches of the industry. This standard does not present or establish a fixed series of allowable tank sizes .