ZebOS Network Platform Routing Information Protocol .
BIG-IP Advanced Routing Routing Information ProtocolCommand Reference GuideVersion 7.10.2
Publication DateThis document was published on September 16, 2016.Legal NoticesCopyrightCopyright 2001-2016, F5 Networks, Inc. All rights reserved.F5 Networks, Inc. (F5) believes the information it furnishes to be accurate and reliable. However, F5assumes no responsibility for the use of this information, nor any infringement of patents or other rights ofthird parties which may result from its use. No license is granted by implication or otherwise under anypatent, copyright, or other intellectual property right of F5 except as specifically described by applicableuser licenses. F5 reserves the right to change specifications at any time without notice.TrademarksAAM, Access Policy Manager, Advanced Client Authentication, Advanced Firewall Manager, AdvancedRouting, AFM, Alive With F5, APM, Application Acceleration Manager, Application Security Manager,ARX, AskF5, ASM, BIG-IP, BIG-IQ, Cloud Extender, CloudFucious, Cloud Manager, ClusteredMultiprocessing, CMP, COHESION, Data Manager, DevCentral, DevCentral [DESIGN], DNS Express,DSC, DSI, Edge Client, Edge Gateway, Edge Portal, ELEVATE, EM, Enterprise Manager, ENGAGE, F5,F5 [DESIGN], F5 Certified [DESIGN], F5 Networks, Fast Application Proxy, Fast Cache, FirePass,Global Traffic Manager, GTM, GUARDIAN, iApps, IBR, Intelligent Browser Referencing, IntelligentCompression, IPv6 Gateway, iControl, iHealth, iQuery, iRules, iRules OnDemand, iSession, L7 RateShaping, LC, Link Controller, Local Traffic Manager, LTM, LineRate, LineRate Systems [DESIGN],LROS, Message Security Manager, MSM, OneConnect, Packet Velocity, PEM, Policy EnforcementManager, Protocol Security Manager, PSM, Real Traffic Policy Builder, ScaleN, Signalling DeliveryController, SDC, SSL Acceleration, StrongBox, SuperVIP, SYN Check, TCP Express, TDR, TMOS,Traffic Management Operating System, Traffix Systems, Traffix Systems (DESIGN), Transparent DataReduction, UNITY, VAULT, VIPRION, vCMP, VE F5 [DESIGN], Virtual Clustered Multiprocessing,WA, WAN Optimization Manager, WebAccelerator, WOM, and ZoneRunner, are trademarks or servicemarks of F5 Networks, Inc., in the U.S. and other countries, and may not be used without F5's expresswritten consent.All other product and company names herein may be trademarks of their respective owners.A portion of this reference guide is copyrighted by IP Infusion, Inc.ZebOS is a registered trademark, and IP Infusion and the ipinfusion logo are trademarks of IP Infusion.All other trademarks are trademarks of their respective companies.This documentation is subject to change without notice. The software described in this document and thisdocumentation are furnished under a license agreement or nondisclosure agreement. The software anddocumentation may be used or copied only in accordance with the terms of the applicable agreement. Nopart of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or anymeans electronic or mechanical, including photocopying and recording for any purpose other than thepurchaser's internal use without the written permission of IP Infusion Inc.F5 Networks, Inc. (F5) believes the information it furnishes to be accurate and reliable. However, F5assumes no responsibility for the use of this information, nor any infringement of patents or other rights ofthird parties which may result from its use. No license is granted by implication or otherwise under anypatent, copyright, or other intellectual property right of F5 except as specifically described by applicableuser licenses. F5 reserves the right to change specifications at any time without notice.All other product and company names herein may be trademarks of their respective owners.i
ii
Table of ContentsCHAPTER 1ZebOS Command Line Interface Environment . . . . . . . . . . . . . . . . . . 7Command Line Interface Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Starting the Command Line Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Command Line Interface Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Command Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Command Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Command Line Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Command Negation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Typographic Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Variable Placeholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Command Description Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Keyboard Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Show Command Tokens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Output Modifiers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Common Command Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Common Command Mode Tree. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16CHAPTER 2Routing Information Protocol Commands . . . . . . . . . . . . . . . . . . . . . 17accept-lifetime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19cisco-metric-behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21clear ip rip route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22debug rip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23default-information originate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24default-metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26distribute-list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27ip rip authentication key-chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28ip rip authentication mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29ip rip authentication string . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30ip rip receive-packet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31ip rip receive version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32ip rip send-packet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33ip rip send version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34ip rip split-horizon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35key chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37key chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38key-string . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39maximum-prefix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40neighbor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42offset-list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43iii
Table of Contentspassive-interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .recv-buffer-size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .redistribute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .restart rip graceful . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .rip restart grace-period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .router rip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .send-lifetime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .show debugging rip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .show ip protocols rip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .show ip rip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .show ip rip interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .timers basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4445464748495051525354555657CHAPTER 3RIPng Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .aggregate-address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .cisco-metric-behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .clear ipv6 rip route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .debug ipv6 rip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .default-information originate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .default-metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .distribute-list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ipv6 rip metric-offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ipv6 rip split-horizon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ipv6 router rip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .neighbor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .offset-list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .passive-interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .recv-buffer-size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .redistribute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .route-map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .router ipv6 rip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .show debugging ipv6 rip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .show ipv6 protocols rip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .show ipv6 rip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .show ipv6 rip interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .timers basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Appendix ARouting Information Protocol Authentication. . . . . . . . . . . . . . . . . . . 85Single Key Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85Multiple Keys Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index - 1iv
CHAPTER 1ZebOS Command Line Interface EnvironmentNetwork administrators and application developers who configure the ZebOS Network Platform use this commandreference which includes the following information: An overview of the ZebOS Command Line Interface A complete reference of the commands used for Routing Information Protocol (RIP) configurationYou can give the commands described in this manual locally from the console of a device running ZebOS or remotelyfrom a terminal emulator such as putty or xterm.Command Line Interface OverviewThe ZebOS Command Line Interface (CLI) is a text-based command interface. Each command is usually associatedwith a specific task. The commands can be used in scripts to automate configuration tasks.Starting the Command Line InterfaceYou must start daemons as described in this section before you can use the CLI. The general steps are listed below.For details about the ZebOS daemons, see the ZebOS Network Platform Installation Guide.1. Start your terminal emulator and connect to the device or go to the console of the device running ZebOS.2. Connect to the directory where you installed the ZebOS executables.3. Start the Network Services Manager (NSM).# ./nsm -d4.Start the protocol module daemons that your organization uses, such as mstpd, ospf6d, or ripd.# ./mstpd –d5. Start the Integrated Management Interface (IMI) daemon.# ./imi -d6. Start the IMI shell.# ./imishNote:Your organization may use a ZebOS build that does not include imish. If that is the case, you mustconnect to a port on which a protocol daemon is listening. For details, see the ZebOS Network PlatformInstallation Guide.You can now begin using the CLI.Command Line Interface HelpYou access the CLI help by entering a full or partial command string and a question mark “?”. The CLI displays thecommand keywords or parameters along with a short description. For example, at the CLI command prompt, type:ZebOS show ?The CLI displays this keyword list with short descriptions for each keyword:7
ZebOS Command Line Interface EnvironmentZebOS show essroute-maprouter-idrunning-config.List IP access listsBidirectional Forwarding Detection (BFD)Border Gateway Protocol (BGP)Show CLI tree of current modeConnectionless-Mode Network Service (CLNS)Debugging functions (see also 'undebug')Show recorded faultsDisplay the session command historyInterface status and configurationInternet Protocol (IP)Internet Protocol version 6 (IPv6)Intermediate System-Intermediate SystemShow command listsMRIBNSMShow current privilege levelShow process namesProcessroute-map informationRouter IDCurrent Operating configurationIf you type the ? in the middle of a keyword, the CLI displays help for that keyword only.ZebOS show de?debugging Debugging functions (see also 'undebug')If the ? is typed in the middle of a keyword, but the incomplete keyword matches several other keywords, ZebOSdisplays help for all matching keywords.ZebOS show i? (CLI does not display the question mark).interface Interface status and configurationipIP informationisisISIS informationCommand CompletionThe CLI can complete the spelling of a command or a parameter. Begin typing the command or parameter and thenpress the tab key. For example, at the CLI command prompt type sh:ZebOS shPress the tab key. The CLI displays:ZebOS showIf the command or parameter spelling is ambiguous, the ZebOS CLI displays the choices that match the abbreviation.Type show i and press the tab key. The CLI displays:ZebOS show iinterface ipZebOS show iipv6isisThe CLI displays the interface and ip keywords. Type n to select interface and press the tab key. The CLIdisplays:ZebOS show inZebOS show interfaceType ? and the CLI displays the list of parameters for the show interface command.8
ZebOS Command Line Interface EnvironmentZebOS show interfaceIFNAME Interface name Output modifiers Output redirection cr The CLI displays the only parameter associated with this command, the IFNAME parameter.Command AbbreviationsThe CLI accepts abbreviations that uniquely identify a keyword in commands. For examplesh in eth0is an abbreviation for the show interface command.Command Line ErrorsAny unknown spelling variation causes the CLI to display the error Unrecognized command in response to the ?.The CLI displays the command again as last entered.ZebOS show dd?% Unrecognized commandZebOS show ddWhen you press the Enter key after typing an invalid command, the CLI displays:ZebOS(config)#router ospf here % Invalid input detected at ' ' marker.where the points to the first character in error in the command.If a command is incomplete, the CLI displays the following message:ZebOS show% Incomplete command.Some commands are too long for the display line and can wrap in mid-parameter or mid-keyword, as shown below:area 10.10.0.18 virtual-link 10.10.0.19 authentication-key 57393Command NegationMany commands can be negated using the no keyword. Depending on the command or the parameters, somecommand negation can disable one feature or a feature for a specific ID, interface, address or other identifier. However,some negation is for the base command only and the negated form does not take a parameter.9
ZebOS Command Line Interface EnvironmentTypographic ConventionsThe following table describes the typographic conventions used in this ntCommand strings entered on a command lineshow ip ospflowercaseKeywords that you enter exactly as shown in thecommand syntax.show ip ospfUPPERCASESee Variable PlaceholdersIFNAME()Optional parameters, from which you must selectone. Vertical bars delimit the selections. Do notenter the parentheses or vertical bars as part of thecommand.(A.B.C.D 0-4294967295 )()Optional parameters, from which you select one ornone. Vertical bars delimit the selections. Do notenter the parentheses or vertical bars as part of thecommand.(A.B.C.D 0-4294967295 )()Optional parameter which you can specify or omit.Do not enter the parentheses or vertical bar as partof the command.(IFNAME ){}Optional parameters, from which you must selectone or more. Vertical bars delimit the selections. Donot enter the braces or vertical bars as part of thecommand.{intra-area 1-255 inter-area 1-255 external 1-255 }[]Optional parameters, from which you select zero ormore. Vertical bars delimit the selections. Do notenter the brackets or vertical bars as part of thecommand.A '?' before a parameter in square brackets limitsthat parameter to one occurrence in a commandstring.[ 1-65535 AA:NN internet local-AS no-advertise no-export].Repeatable parameter. The parameter that follows aperiod can be repeated more than once. Do notenter the period as part of the command.set as-path prepend . 1-65535 10
ZebOS Command Line Interface EnvironmentVariable PlaceholdersThe command syntax use the following tokens to represent command line variables for which you supply a value:TokenDescriptionWORDA contiguous text string (excluding spaces), such as IFNAME for the name of an interfaceLINEA text string, including spaces; no other parameters can follow this parameterA.B.C.DIPv4 addressA.B.C.D/MIPv4 address and mask/prefixX:X::X:XIPv6 addressX:X::X:X/MIPv6 address and mask/prefixHH:MM:SSTime formatAA:NNBGP community valueXX:XX:XX:XX:XX:XXMAC address 1-5 1-65535 0-2147483647 0-4294967295 Numeric rangeCommand Description FormatThe following table explains the sections used to describe each command in this reference.SectionDescriptionCommand NameThe command, what the command does, and when should it be usedCommand SyntaxThe syntax of the commandParametersParameters and options for the commandDefaultThe status before the command is executedCommand ModeThe name of the mode in which this command is used. Examples include Exec or Configuremodes.ExampleAn example of the command being executed11
ZebOS Command Line Interface EnvironmentKeyboard OperationsYou can perform these operations from the keyboard:Key combinationOperationLeft arrow or Ctrl bMoves one character to the left. When a command extends beyond a single line, you can press leftarrow or Ctrl b repeatedly to scroll toward the beginning of the line, or you can press Ctrl a to godirectly to the beginning of the line.Right arrow or Ctrl-fMoves one character to the right. When a command extends beyond a single line, you can press rightarrow or Ctrl f repeatedly to scroll toward the end of the line, or you can press Ctrl e to go directly tothe end of the line.Esc, bMoves back one wordEsc, fMoves forward one wordCtrl eMoves to end of the lineCtrl aMoves to the beginning of the lineCtrl uDeletes the lineCtrl wDeletes from the cursor to the previous whitespaceAlt dDeletes the current wordCtrl kDeletes from the cursor to the end of lineCtrl yPastes text previously deleted with Ctrl k, Alt d, Ctrl w, or Ctrl u at the cursorCtrl tTransposes the current character with the previous characterCtrl cIgnores the current line and redisplays the command promptCtrl zEnds configuration mode and returns to exec modeCtrl lClears the screenUp Arrow or Ctrl pScroll backward through command historyDown Arrow or Ctrl nScroll forward through command historyShow Command TokensYou can use two tokens to modify the output of a show command. Enter a question mark to display these tokens:ZebOS# show users ? Output modifiers Output redirectionOutput ModifiersYou can type the (vertical bar character) to use output modifiers. For example:ZebOS show rsvp ?12
ZebOS Command Line Interface EnvironmentbeginexcludeincluderedirectBegin with the line that matchesExclude lines that matchInclude lines that matchRedirect outputBegin ModifierThe begin modifier displays the output beginning with the first line that contains the input string (everything typed afterthe begin keyword). For example:ZebOS# show run begin eth1.skippinginterface eth1ipv6 address fe80::204:75ff:fee6:5393/64!interface eth2ipv6 address fe80::20d:56ff:fe96:725a/64!line con 0login!endYou can specify a regular expression after the begin keyword, This example begins the output at a line with either“eth3” or “eth4”:ZebOS#show run begin eth[3-4].skippinginterface eth3shutdown!interface eth4shutdown!interface svlan0.1no shutdown!route-map myroute permit 3!route-map mymap1 permit 10!route-map rmap1 permit 3!line con 0loginline vty 0 4login!end13
ZebOS Command Line Interface EnvironmentInclude ModifierThe include modifier includes only those lines of output that contain the input string. In the output below, all linescontaining the word “input” are included:ZebOS# show interface eth1 include inputinput packets 80434552, bytes 2147483647, dropped 0, multicast packets 0input errors 0, length 0, overrun 0, CRC 0, frame 0, fifo 1, missed 0You can specify a regular expression after the include keyword. This examples includes all lines with “input” or“output”:ZebOS#show int eth0 include (in out)putinput packets 597058, bytes 338081476, dropped 0, multicast packets 0input errors 0, length 0, overrun 0, CRC 0, frame 0, fifo 0, missed 0output packets 613147, bytes 126055987, dropped 0output errors 0, aborted 0, carrier 0, fifo 0, heartbeat 0, window 0Exclude ModifierThe exclude modifier excludes all lines of output that contain the input string. In the following output example, all linescontaining the word “input” are excluded:ZebOS# show interface eth1 exclude inputInterface eth1Scope: bothHardware is Ethernet, address is 0004.75e6.5393index 3 metric 1 mtu 1500 UP,BROADCAST,RUNNING,MULTICAST VRF Binding: Not boundAdministrative Group(s): NoneDSTE Bandwidth Constraint Mode is MAMinet6 fe80::204:75ff:fee6:5393/64output packets 4438, bytes 394940, dropped 0output errors 0, aborted 0, carrier 0, fifo 0, heartbeat 0, window 0collisions 0You can specify a regular expression after the exclude keyword. This example excludes lines with “output” or “input”:ZebOS#show interface eth0 exclude (in out)putInterface eth0Scope: bothHardware is Ethernet Current HW addr: 001b.2139.6c4aPhysical:001b.2139.6c4a Logical:(not set)index 2 metric 1 mtu 1500 duplex-full arp ageing timeout 3000 UP,BROADCAST,RUNNING,MULTICAST VRF Binding: Not boundBandwidth 100mDHCP client is disabled.inet 10.1.2.173/24 broadcast 10.1.2.255VRRP Master of : VRRP is not configured on this interface.inet6 fe80::21b:21ff:fe39:6c4a/64collisions 0Redirect ModifierThe redirect modifier writes the output into a file. The output is not displayed.14
ZebOS Command Line Interface EnvironmentZebOS# show history redirect /var/frame.txtThe output redirection token ( ) does the same thing:ZebOS# show history /var/frame.txtCommon Command ModesCommands are grouped into modes arranged in a hierarchy. Each mode has its own set of commands. The commandmodes common to all protocols are listed below.NameDescriptionExecutiveModeAlso called the view mode, this the first mode to appear after you start the CLI. It is a base mode from where youcan perform basic commands such as show, exit, quit, help, list, and enable.PrivilegedExecutiveModeAlso called the enable mode, in this mode you can run additional basic commands such as debug, write, andshow.ConfigureModeAlso called Configure Terminal mode, in this mode you can run configuration commands and go into other modessuch as Interface, Router, Route Map, Key Chain, and Address Family.InterfaceModeIn this mode you can configure protocol-specific settings for a particular interface. Any setting you configure inthis mode overrides a setting configured in Router mode.RouterModeThis mode is used to configure router-specific settings for a protocol such as RIP or OSPF.15
ZebOS Command Line Interface EnvironmentCommon Command Mode TreeThe diagram below shows the common command mode hierarchy.Start inExecutivemodeenable (password)PrivilegedExecutivemodeconfigure terminalConfiguremodeinterface eth0Interfacemoderouter ripRoutermodeTo change modes:1. Enter Privileged Executive mode by entering enable in Executive mode.2. Enter Configure mode by entering configure terminal in Privileged Executive mode.The example below shows starting imish and then moving from Executive mode to Privileged Executive mode toConfigure mode and finally to Router mode:# ./imishZebOS enable mypasswordZebOS#configure terminalEnter configuration commands, one per line.ZebOS(config)#router ripZebOS(config-router)#End with CNTL/Z.See the ZebOS Network Platform NSM Command Line Interface Reference Guide for information about othercommand modes.Note:16Each protocol can have modes in addition to the common command modes. See the command reference forthe respective protocol for details.
CHAPTER 2Routing Information Protocol CommandsThis chapter provides an alphabetized reference for each of the Routing Information Protocol (RIP) commands, whichsupport IPv4. It includes the following commands: accept-lifetime on page 19 cisco-metric-behavior on page 21 clear ip rip route on page 22 debug rip on page 23 default-information originate on page 24 default-metric on page 25 distance on page 26 distribute-
Sep 16, 2016 · Command Line Interface Overview The ZebOS Command Line Interface (CLI) is a text-based command interface. Each command is usually associated with a specific task. The commands can be used in scripts to automate configuration tasks. Starting the Command Line Interface You must start daemons
systems (AS) (a.k.a. "domains") inter-AS routing § routing among AS'es § gateways perform inter-domain routing (as well as intra-domain routing) Internet approach to scalable routing intra-AS routing § routing among hosts, routers in same AS ("network") § all routers in AS must run sameintra-domain protocol § routers in .
iv Routing TCP/IP, Volume II About the Author Jeff Doyle, CCIE No. 1919, is vice president of research at Fishtech Labs. Specializing in IP routing protocols, SDN/NFV, data center fabrics, MPLS, and IPv6, Jeff has designed or assisted in the design of large-scale IP service provider and enterprise net-works in 26 countries over 6 continents.File Size: 7MBPage Count: 158Explore furtherRouting TCP/IP Volume 1 PDF Download Free 1578700418ebooks-it.orgDownload [PDF] Routing Tcp Ip Volume 1 2nd . - Usakochanwww.usakochan.netCcie Routing Tcp/ip Vol 1(2nd) And 2 Free . - Ebookeewww.ebookee.netJeff Doyle eBooks Download Free eBooks-IT.orgebooks-it.orgCCIE Professional Development Routing TCP . - Academia.eduwww.academia.eduTcp ip volume 1 jeff doyle pdf - AKZAMKOWY.ORGakzamkowy.orgRecommended to you b
Tutorial 13: Routing 3 Routing Routing is het gedeelte van SolidWorks waarmee je leidingen, bedradingen en componenten aan je pro-duct kunt toevoegen. Routing is geen onderdeel van de basisversie van SolidWorks. Gebruik je de Stu-dent Design Kit van SolidWorks, dan kun je deze tutorial dus niet doen. In de Student Edition is Routing
Classfull/Classless Routing Protocols Classful routing protocol does not send subnet masks in updates, but presumes that all networks are of A/B/C class often perform automatic summarization on major network boundary by default Classless routing protocol carry subnet masks
an interconnected network architecture. There are inter-domain and intra-domain routing protocols. The inter-domain routing protocol has experienced increasingly frequent anomalies, such as IP prefix hijackings, route leaks, or impact from large-scale disruptive routing events. The intra-domain routing also suffers from various attacks
Enhanced Interior Gateway Routing Protocol (EIGRP) is an example of a balanced hybrid routing protocol. EIGRP has several advantages over Routing Information Protocol (RIP) and Interior Gateway Routing Protocol (IGRP), and even some advantages over Open Shortest Path First (OSPF) and Intermediate System-to-Intermediate System (IS-IS).
Here is a look at the Festool MFS 400 and MFS 700, multi-routing template system. While these tools excel as routing templates they are capable of far more. Routing operations like open-field inlays, borders, cutouts, mortises, routing circles, curves and arcs are just part of what the MFS system can
The principle of archaeological illustration outlined above remains the same, and digital technology has not changed this: What it has done has provided different tools, in the form of graphics software and scanning hardware to enable a more efficient execution of illustrations. This guide addresses how to illustrate small finds using existing principles within a digital environment which is .
