Cora Bike Racks BMSP Instructions V2 - ArchitectureAU
Bike Rack Installation InstructionsCora Bike Rack - Bike Maintenance Stand and Pump (BMSP)This instruction sheet is to be used for installation of the BMSP Cora Bike Maintenance Stand and PumpBike stand with toolsBike stand pumpComponents for Bike Stand used in assemblyComponents for Bike Stand Pump usedin assemblyBike HolderToolsincluded; ScrewdriverFlat Head x 1 ScrewdriverPhilips head x 1 Bicycle Tyre Lever x 2 Hex socket multi tool x 1 Open end Spanner10mm/12mm x 1 Open end Spanner8mm/9mm x 1 Open end Spanner11mm/13mm x 1 Open end Spanner14mm/15mm x 1 Open end Spanner30mm/32mm x 1Bike toolsattached toflexible cable5 Sidedsecuritynut (x3)Round headsquareneck bolt(x3)Anchor Bolts(X4 per post)BikestandAnchor Bolts(X4 per post)SecurityCustom toolshear nutssupplied for5 sided nut (X4 per post)Securityshear nuts(X4 per post)Bike pumpstand1. Site selection When selecting a site for your bike maintenance stand, the most important advice is - do not try to hide it,as it will not be used!Locate the bike maintenance stand and bike pump on a level surface in the immediate area where bicyclesare parked.Cora Bike Rack - Australia’s Bike Parking Experts - WWW.CORA.COM.AU - PH 1800 249 878Rev 2.00 Feb 2020
Bike Rack Installation InstructionsCora Bike Rack - Bike Maintenance Stand and Pump (BMSP)2. Access and clearanceWallWallMinimum spacing of 300between back of stand andwalls or other obstructions1200Minimum spacing of 1200between either side of stand andwalls or other obstructions300Access dimensions around bike maintenance stand Before mounting stand, find a suitable place that will allowfor minimum spacing dimensions Ensure minimum spacing from walls, bike racks or obstructions toallow for minimum access300Minimum spacing of 300 between standand pump (centre to centre)Cora Bike Rack - Australia’s Bike Parking Experts - WWW.CORA.COM.AU - PH 1800 249 878Rev 2.00 Feb 2020
Bike Rack Installation InstructionsCora Bike Rack - Bike Maintenance Stand and Pump (BMSP)3. Drill holes for maintenance stand and bike pump in location Use the anchorbolts included Place maintenance stand and pump standin the desired location, ensuring correctclearance on all sides Place an pencil through the footingholes to mark the correct position Remove stands, drill or core a hole using a13mm diameter drill bit to 80mm min. depth.Clear holes of dust.Do not drill over plumbing and/or electricalconduits, or through waterproof membranesthat may be located just below surface level. Place stands back into correct positions, placethe flat washers and standard nut on to theanchorbolt, and hammer the bolts intoplace. Tighten nuts firmly4. Adding the security nuts To use the included security shear head nuts,carefully remove the tightened standard nuts,leaving the flat washers in place Screw on the new security nuts with the wideround base at the bottom Tighten the security nut firmly, and keeptightening until the top half of the nut snaps off Remove the top half of the Security Nut anddiscard. The lower half remains in place toprovide an effective tamper resistant fixingCora Bike Rack - Australia’s Bike Parking Experts - WWW.CORA.COM.AU - PH 1800 249 878Rev 2.00 Feb 2020
Bike Rack Installation InstructionsCora Bike Rack - Bike Maintenance Stand and Pump (BMSP)5. Attach the bike stand tools Insert the tool cables oneat a time into the cable slotat the top of the bike toolstand. Each tool cable isinserted into the cableholder through the insideof the stand and distributedevenly along the cableholder6. Attach the bike hanger Attach one five sided nut per bolt Tighten nuts from the inside of the standusing the custom tool supplied Place the bike holder in thecorrect position on top of the bikemaintenance stand Insert round head square nut bolts fromtop into three square holesCora Bike Rack - Australia’s Bike Parking Experts - WWW.CORA.COM.AU - PH 1800 249 878Rev 2.00 Feb 2020
Bike Rack Installation InstructionsCora Bike Rack - Bike Maintenance Stand and Pump (BMSP)7. Installation completeInstallation of the Cora Bike MaintenanceStand is now completePH 1800 249 878sales@cora.com.auwww.cora.com.auCora Bike Rack - Australia’s Bike Parking Experts - WWW.CORA.COM.AU - PH 1800 249 878Rev 2.00 Feb 2020
Cora Bike Rack - Bike Maintenance Stand and Pump (BMSP) This instruction sheet is to be used for installation of the BMSP Cora Bike Maintenance Stand and Pump Cora Bike Rack - Australia’s Bike Parking Expert
Cora Bike Rack – make the secure Expo Bike Racks. Call 1 (800)-739-4609 or visit Cora Bike Racks Dero in Minneapolis, MN manufacture commercial and custom designed bike racks, lockers and shelters. Dero has been supplying municipal and landsca
10 Hoop Rack Hoop Rack Heavy Duty Round Rack Arc Rack 11 Swerve Rack Bike Hitch Downtown Rack 12 Bike Bike Rack Cycle Dock 13 Helix Rack Hi Roller Campus Rack Rolling Rack CUSTOM BIKE RACKS 14 Full Custom Designs Image Infusion 15 Logo Racks Icon Hitch Type Rider Racks SPECIALTY RACKS 16 Event Rack Compack R
2.01 Bicycle Racks and Loops A. Single unit Loops 1. Manufacturer: Wabash Valley Manufacturing, Inc. www.wabashvalley.com a). Model BL100N, 36”, Black (Figure 5) b). In ground B. Multiple unit racks 1. Manufacturer: Cora Bike Rack, Inc. www.cora.com a). Cora Expo ‘W’ Series Bicycle Rack (
cyclists, such as public bike racks and public repair stations. Placing public bike parking near recreation sites such as parks and beach access points, to encourage cycling and to increase the use . Cora Bike Rack, Inc. (2007) Cora E
6 floor mounted cora bike rails 34 wall-mounted bike racks 14 floor mounted cora bike rails (inc. 4 with gpos for electric bikes) ahd -1.850 6400 6400 4 0 0 6400 2 4 0 0 1 3 5 2 2600 1 3 7 0 1646 1040 350 1050 350 3 7 5 325 625 3850 1512 4 motor bikes 1 motorbike lift pit over typ 350 t y p 1
“ribbon” racks or Cora “coathanger” racks. These style of racks do not provide two-points of contact with the bike and have issues with handlebar entanglement. That’s why SDOT’s Bicycle Parking Guidelines do not permit this style of bike rack. Inst
Bike, dirt bike PART # 10056 16 oz. Tube Sealant Bike, dirt bike, wheelbarrow Family Size PART # 10056HT 16 oz. Tube Sealant with hang tag Bike, dirt bike, wheelbarrow Family Size PART # 10159 3 oz. Slime Pro Tubeless Sealant Bike PART # 10160SL 8 oz. Slime Pro Tubeless Sealant Bike PART # 10004 16 oz. Tube Sealant B
CCSS Checklist—Grade 2 Writing 1 Teacher Created Resources Writing Text Types and Purposes Standard Date Taught Date Retaught Date Assessed Date Reassessed Notes ELA-Literacy.W.2.1 Write opinion pieces in which they introduce the topic or book they are writing about, state an opinion, supply reasons that support the opinion, use linking words (e.g., because, and, also) to connect opinion and .
