Ergonomics In The Workplace - Health And Safety Authority

Ergonomics in theWorkplace

ERGONOMICSIN THEWORKPLACEErgonomics in theWorkplace1

ERGONOMICSIN THEWORKPLACEIntroductionThe purpose of this short guide is to provide information to the readeron the subject of Ergonomics. It also provides guidance on where tosource further information. It is not within the bounds of this guidanceto discuss in detail all the main aspects of knowledge in the field ofErgonomics. However efforts will be made to give the reader anunderstanding of different Ergonomic principles aswell as anappreciation of relevant and useful literature and textbooks, whichcover the subject of Ergonomics in more detail.The guidance is designed to assist those who deal with Ergonomicissues in a workplace setting and these include architects, designers,engineers, manufacturers, suppliers, contractors, health and safetyprofessionals, safety representatives, employers and employees.“Ergonomics applies information about human behaviour,abilities and limitations and other characteristics to thedesign of tools, machines, tasks, jobs and environmentsfor productive, safe, comfortable and effective humanuse” (McCormick and Saunders 1993).A number of factors play a role in Ergonomics; these include bodyposture and movement (sitting, standing, lifting, pulling and pushing),and environmental factors (noise, lighting, temperature, humidity).(Dul et al 1993).THE IMPACT OF ERGONOMICS ON WORKPLACEDESIGNThe goal of Ergonomics is to provide maximum productivity withminimal cost; in this context cost is expressed as the physiological orhealth cost to the worker. In a workplace setting there are seldom alarge number of tasks that exceed the capabilities of most of the workforce. There may be jobs that will include a specific task that requires2

ERGONOMICSIN THEWORKPLACEextended reaches or overhead work that cannot be sustained for longperiods, by using Ergonomic principles to design these tasks; morepeople should be able to perform the job without the risk of injury.Ergonomics has already been defined and its primary focus is on thedesign of work activity that suits the person in that it takes account oftheir capabilities and limitations. Matching the requirements of a jobwith the capabilities of the worker is the approach to be adopted inorder to reduce the risks of musculoskeletal injuries resulting fromhandling materials manually.Proactive Ergonomics emphasises the prevention of work relatedmusculoskeletal disorders through recognising, anticipating andreducing risk factors in the planning stages of new systems of work orworkplaces. In effect, to design operations that ensures proper selectionand use of tools, job methods, workstation layouts and materials thatimpose no undue stress and strain on the worker. Additional costs areincurred in redesigning or modifying work processes therefore it is morecost effective to reduce risk factors at the design stage.A proactive approach to Ergonomics will ensure that: Designers will receive training in ergonomics and haveappropriate information and guidelines regarding risk reduction Decision-makers planning new work processes should haveknowledge of Ergonomics principles that contribute to thereduction or elimination of risk. Design strategies emphasise fitting job demands to thecapabilities and limitations of workers. For example, for tasksrequiring heavy materials handling, use of mechanical assistdevices to reduce the need for manual handling would bedesigned into the process Other aspects of design should be considered including loaddesign, layout of the workplace to allow for ease of access whenusing mechanical aids and eliminating unnecessary liftingactivities.3

ERGONOMICSIN THEWORKPLACEERGONOMIC PRINCIPLES THAT CONTRIBUTE TOGOOD WORKPLACE DESIGNThe goal for the design of workplaces is to design for as many peopleas possible and to have an understanding of the Ergonomic principlesof posture and movement which play a central role in the provision ofa safe, healthy and comfortable work environment. Posture andmovement at work will be dictated by the task and the workplace, thebody’s muscles, ligaments and joints are involved in adopting posture,carrying out a movement and applying a force. The muscles providethe force necessary to adopt a posture or make a movement. Poorposture and movement can contribute to local mechanical stress onthe muscles, ligaments and joints, resulting in complaints of the neck,back, shoulder, wrist and other parts of the musculoskeletal system.Ergonomic principles provide possibilities for optimising tasks in theworkplace These principles are summarised in Table 1 below:TABLE 1:4ERGONOMICPRINCIPLEDESCRIPTIONJoints must bein a neutralpositionIn the neutral position themuscles and ligaments, whichspan the joints, are stretchedto the least possible extentKeep workclose to thebodyIf the work is too far from thebody, the arms will beoutstretched and the trunkbent over forwards

ERGONOMICSIN THEWORKPLACEERGONOMICPRINCIPLEDESCRIPTIONAvoid bendingforwardThe upper part of the body ofan adult weighs about 40kgon average. The further thetrunk is bent forwards, theharder it is for the musclesand ligaments of the back tomaintain the upper body inbalanceA twisted trunkstrains the backTwisted postures of the trunkcause undesirable stress to thespineAlternateposture as wellas movementsNo posture or movementshould be maintained for along period of time.Prolonged postures andrepetitive movements aretiring.Avoid excessivereachesIt is necessary to limit theextent of forward andsideways reaches to avoidhaving to bend over or twistthe trunkAvoid carryingout tasksabove shoulderlevelThe hands and elbows shouldbe well below shoulder levelwhen carrying out a task5

ERGONOMICSIN THEERGONOMICPRINCIPLEWORKPLACEDESCRIPTIONLimit theweight of aload that isliftedThere are guidance weightlimits for both males andfemales detailed in Figure 2of this documentUse mechanicalaidsMany lifting accessories areavailable to help lift andmove loadsAvoid carryingloads with onehandWhen only one hand is usedto carry a load, the body issubject to mechanical stressUse transportaccessoriesThere are a large number ofaccessories such as rollerconveyors, conveyor belts,trolleys and mobile raisingplatforms, which eliminate orreduce manual handling.ERGONOMICS AND IRISH LEGISLATIONThe Manual Handling of Loads RegulationMany of the Ergonomic Principles, which have been detailed above,have been incorporated into Irish Legislation. The Safety Health andWelfare at Work (General Application) Regulations of 1993 containregulations dealing specifically with the manual handling of loads.6

ERGONOMICSIN THEWORKPLACEThe regulation is titled the Manual Handling of Loads Regulation.These regulations are likely to be remade in 2006 without substantivechanges. There is detailed guidance on this regulation in the Healthand Safety Authority publication Management of Manual Handling inthe Workplace.The Regulation details a definition of Manual Handling as:“any transporting or supporting of a load by one or moreemployees, and includes lifting, putting down, pushing,pulling, carrying or moving a load, which by reason of itscharacteristics or unfavourable ergonomic conditions,involves risk, particularly of back injury, to employees”There is a schedule attached to the Manual Handling of LoadsRegulation, which details these unfavourable ergonomic conditions orrisk factors for the manual handling of loads. The Manual Handlingregulations require the employer to have regard to these risk factorswhen assessing manual handling activities.These risk factors mirror many of the Ergonomic principles alreadydescribed in this guidance leaflet. The Regulation sets out a frameworkfor employers to avoid or reduce manual handling activity through arisk assessment process, which takes account of the risk factors detailedin the schedule. Ideally the risk assessment process should take placeat the design or planning stage of new systems of work, but musthappen as a matter of course for any existing systems of work, whichinvolve manual handling.Manual Handling Risk Assessment:Risk assessment is a process which involves gaining a detailedunderstanding of a task being carried out, collecting all relevanttechnical details of the task, identifying if there are risk factors/hazardspresent, exploring what options or solutions are available to reduce or7

ERGONOMICSIN THEWORKPLACEeliminate the risk factors/hazards and putting a plan in place tointroduce agreed control measures.There are a number of steps in the manual handling risk assessmentprocess and these are described briefly below:Step 1: Identify the Manual Handling Tasks that need to be assessedA list should be put together of all tasks being performed on sitewhere manual handling activity is a key component of the task.Step 2: Develop a risk assessment scheduleA plan should be put in place that will identify what tasks aregoing to be assessed and when the assessments are going to becarried out. Involving staff in the planning andimplementation of the risk assessment process can be animportant way of increasing the likelihood of success of theprocess.Step 3: The Risk Assessment ProcessThere are a number of key stages in this process and these arebriefly discussed below.Task Observation and descriptionThe objective at this stage is to gain a detailed understandingof how a task is performed and to identify the sub tasks thatcontribute to the completion of the overall task.Collect Task DataA well-documented manual handling risk assessment willhave good quality information about the task, which willinclude technical information and general information.Examples of technical information include data on loadweights, physical measures of a work area, dimensions of a8

ERGONOMICSIN THEWORKPLACEload, number of manual lifts in a task, light levels, noise levels.Frequency of lifts (lifts per min/hour/day) and duration.Identification of Risk FactorsThe Schedule in the regulation details the unfavourableergonomic conditions or risk factors, which should beconsidered as part of the risk assessment process. Figure 1details examples of some of these risk factors. ErgonomicsResearch which has been conducted to identify workplacefactors that contribute to the development of musculoskeletaldisorders including back injury, has demonstrated thefollowing as important risk factors:Awkward PostureBody postures determine which joints and muscles are used inthe activity, more stress is placed on the spinal discs whenlifting, lowering or handling loads with the back bent ortwisted compared with when the back is straight. Activitiesrequiring frequent or prolonged work over shoulder height canbe particularly stressful.9

ERGONOMICSIN THEWORKPLACEFIGURE 1: EXAMPLESOFAWKWARD POSTURESForceful Exertion: Tasks that require forceful exertions placehigher loads on the muscles, tendons and joints. Increasingforce means increasing body demands such as greater muscleexertion. The weight of a load that has to be lifted, the heightthat the load has to be lifted and the frequency of lift are allfactors that contribute to the level of exertion on the musclesand joints. The Regulations set no specific requirements suchas weight limits.However there are numerical guidelines, which take accountof weight, repetition and location of lifts as a means ofidentifying activities, which involve risk. In using theguideline weights in Figure 2, the assessor should take accountof the type of work activity and have an appreciation of whatrealistic improvements can be put in place to avoid or reducerisk. When assessing manual handling activities it is importantto keep in mind that weight is not the only factor that needs10