Installing Creo 2.0 - PTC

2y ago
24 Views
2 Downloads
1.82 MB
192 Pages
Last View : 2d ago
Last Download : 2m ago
Upload by : Mara Blakely
Transcription

Installing Creo 2.0:Creo Parametric, CreoDirect, Creo Layout, CreoSimulate,and Creo Options ModelerDatecode M160

Copyright 2015 PTC Inc. and/or Its Subsidiary Companies. All Rights Reserved.User and training guides and related documentation from PTC Inc. and its subsidiary companies (collectively"PTC") are subject to the copyright laws of the United States and other countries and are provided under alicense agreement that restricts copying, disclosure, and use of such documentation. PTC hereby grants to thelicensed software user the right to make copies in printed form of this documentation if provided on softwaremedia, but only for internal/personal use and in accordance with the license agreement under which theapplicable software is licensed. Any copy made shall include the PTC copyright notice and any otherproprietary notice provided by PTC. Training materials may not be copied without the express written consentof PTC. This documentation may not be disclosed, transferred, modified, or reduced to any form, includingelectronic media, or transmitted or made publicly available by any means without the prior written consent ofPTC and no authorization is granted to make copies for such purposes.Information described herein is furnished for general information only, is subject to change without notice,and should not be construed as a warranty or commitment by PTC. PTC assumes no responsibility or liabilityfor any errors or inaccuracies that may appear in this document.The software described in this document is provided under written license agreement, contains valuable tradesecrets and proprietary information, and is protected by the copyright laws of the United States and othercountries. It may not be copied or distributed in any form or medium, disclosed to third parties, or used in anymanner not provided for in the software licenses agreement except with written prior approval from PTC.UNAUTHORIZED USE OF SOFTWARE OR ITS DOCUMENTATION CAN RESULT IN CIVILDAMAGES AND CRIMINAL PROSECUTION. PTC regards software piracy as the crime it is, and we viewoffenders accordingly. We do not tolerate the piracy of PTC software products, and we pursue (both civillyand criminally) those who do so using all legal means available, including public and private surveillanceresources. As part of these efforts, PTC uses data monitoring and scouring technologies to obtain and transmitdata on users of illegal copies of our software. This data collection is not performed on users of legallylicensed software from PTC and its authorized distributors. If you are using an illegal copy of our softwareand do not consent to the collection and transmission of such data (including to the United States), ceaseusing the illegal version, and contact PTC to obtain a legally licensed copy.Important Copyright, Trademark, Patent, and Licensing Information: See the About Box, or copyrightnotice, of your PTC software.UNITED STATES GOVERNMENT RESTRICTED RIGHTS LEGENDThis document and the software described herein are Commercial Computer Documentation and Software,pursuant to FAR 12.212(a)-(b) (OCT’95) or DFARS 227.7202-1(a) and 227.7202-3(a) (JUN’95), and areprovided to the US Government under a limited commercial license only. For procurements predating theabove clauses, use, duplication, or disclosure by the Government is subject to the restrictions set forth insubparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software Clause at DFARS 252.2277013 (OCT’88) or Commercial Computer Software-Restricted Rights at FAR 52.227-19(c)(1)-(2) (JUN’87),as applicable. 01012015PTC Inc., 140 Kendrick Street, Needham, MA 02494 USA

ContentsAbout This Guide .9Preparing to Install Your PTC Software .13What You Receive .14Generating Licenses .14Before You Begin.15Opening a PTC Online Account .15About PTC Installation Assistant .16Working with PTC Installation Assistant.18PTC Software License Agreement .19Authenticating Your User Access .20Quick-Start Installation for Experienced Users .21Updating PTC License Server.22Installing Creo Applications .22Where Your Software Is Installed .23Configuring Licenses for the Creo Applications .25Using PTC Installation Assistant for Licensing.26Using the License Server Manager .26Verifying System Requirements .27Before You Proceed .27Generating or Updating Licenses .28Installing the Creo Applications .33Installation Prerequisites .34File Format Compatibility.34Installing the Creo Applications: Simple Installation Process .34Using PTC Diagnostic Tools with the Creo Applications .38Customizing the Installation of the Creo Applications .39Customizing an Installation.40Defining the Installation Components .41Modifying License Configurations .43Configuring Windows Shortcuts .45Setting Licenses for Creo Simulate .45Completing the Installation and Starting the Creo Applications.47Completing the Installation .48Installing and Uninstalling the Creo Applications in Silent Mode.49Starting the Creo Applications.49Configuring the Creo Application Startup .49Directory Permissions to Start the Creo Applications .525

Installing Creo Platform Agent .52Configuring a Creo Parametric Installation .52Uninstalling the Creo Applications .57Installing and Using Creo Help .59Overview of the Help Center .60Accessing Help within a Creo Application .60Choosing Your Installation Location for the Help Center.60Installing the Help Center .61Enabling the Help Center from a Network Drive.63Installing the Help Center on a Web Server.63Viewing the Help Center Independent of a Creo Application .65Uninstalling the Help Center .65Updating an Installation .67Updating the License Server.68Updating Creo Applications .68Customizing an Existing Installation of a Creo Application.69Installing a Maintenance Release.70Appendix A.License Management Software .71Overview of PTC Licensing .72License Types .72Simplified License Management Process .72PTC License Server.78Benefits of Using FlexNet Publisher .78Downward License Compatibility Using FlexNet Publisher .78Running FlexNet Publisher with Other Applications .79Understanding Timeout Parameters .79Suppressing the Regained Network License Dialog Box for CreoParametric .81Using the Ptcflush Utility.81License Borrowing .82Appendix B.lmadmin License Server Manager.87Overview of lmadmin as a GUI-Client .88Differences between lmgrd and lmadmin .88Installing PTC License Server Based on lmadmin.88Working with the FLEXnet License Administrator Web Interface .89Appendix C.System Administration Information .93Temporary Directories .95System Management Utilities .95Supported Graphics Modes .96General Plotter Information.96Using the ModelCHECK Metrics Tool with Creo Parametric.97Using Fonts. 108OpenType Font Support . 110UNICODE Font Support . 110Available System Fonts for Menu Items . 1116Installing Creo 2.0: Creo Parametric, Creo Direct, Creo Layout, Creo Simulate, andCreo Options Modeler

Extended ASCII Set . 111Displaying the Text Symbol Palette in Creo Parametric . 112Exporting Special Symbols to IGES. 112Font Definition . 112AVI Compression Codecs. 129Exporting Data to Portable Document Format . 130Meeting Browser Requirements . 130Opening a PDF File within the Creo Browser . 131Using Creo View Express to Open Creo Objects . 131Opening Creo Objects from Windows Explorer. 132JavaScript Security . 133Rights Management. 133Appendix D.Installing and Configuring PTC Diagnostic Tools . 135Overview. 136Installing PTC Diagnostic Tools. 136Configuring PTC Diagnostic Tools . 136Using PTC Diagnostic Tools . 140Uninstalling PTC Diagnostic Tools. 141Appendix E.Installing MKS Platform Components . 143Overview. 144Installing MKS Platform Components . 144Appendix F.Installing the Creo Applications in Silent Mode . 145Guidelines and Advantages of a Silent Installation. 146Strategies for the Mass Deployment of Creo Applications . 147Workflow for a Silent Installation . 148Command Syntax for a Silent Installation. 149Locating the XML Files. 151Editing the XML Files . 151Uninstalling the Creo Applications in Silent Mode . 157Installing and Uninstalling Client-Side Components in Silent Mode . 157Installing PTC Diagnostic Tools and MKS Platform Components in SilentMode. 159Updating the Registry File . 159Appendix G.Port Usage by Creo Applications . 161Using Communication Ports . 162Appendix H.Distributed Computing Technology for Creo Parametric. 167Overview of Distributed Computing . 168Supported Functions. 168Configuring Workstations for Distributed Computing . 169Appendix I.Troubleshooting Tips. 171General Debugging Hints . 172Online Information . 172Troubleshooting List. 172Appendix J.Workflow for Installation and Configuration . 177Contents7

Workflow for Generating Licenses for the Creo Applications. 178Workflow for Installing the Creo Applications. 179Workflow for Reconfiguring the Creo Applications . 180Glossary. 181Index. 1898Installing Creo 2.0: Creo Parametric, Creo Direct, Creo Layout, Creo Simulate, andCreo Options Modeler

About This GuideThe Creo design software package encompasses the CAD, CAM, CAE, CAID,and Visualization applications of PTC. It provides flexibility to add newinteroperable capabilities such as 2D modeling, direct modeling, and BOM-drivenassemblies to your software tools. This guide describes how to generate andconfigure licenses, and how to install and maintain the Creo applications—CreoParametric, Creo Direct, Creo Layout, Creo Simulate, and Creo Options Modeler—using PTC Installation Assistant. The installation instructions are also commonfor Creo Distributed Services Manager.System administrators who are installing the Creo applications for the first timemust be experienced in application installations and must have a goodunderstanding of operating systems.How to Use This GuideThis guide supplements the tooltips in PTC Installation Assistant and providesinstallation instructions and reference information. To generate or update licensesand then install or reconfigure the Creo applications, see the following chapters:ChapterPreparing to InstallYour PTC Software onpage 13RoleAll usersQuick-Start Installation Advanced usersfor Experienced Userson page 21InformationDescribes the materials in yoursoftware shipment. Alsoprovides an overview of PTCInstallation Assistant.Describes a quick-startapproach for users who havepreviously installed licensemanagement and productsoftware.9

ChapterConfiguring Licensesfor the CreoApplications on page25Installing the CreoApplications on page33Customizing theInstallation of the CreoApplications on page39Completing theInstallation and Startingthe Creo Applicationson page 47RoleAll usersInformationDescribes how to generate orupdate licenses and install PTCLicense Server.All usersDescribes a simple installationprocess for the Creoapplications.Describes the advancedcustomization options forinstalling the Creo applications.Installing and UsingCreo Help on page 59Advanced users andDescribes how to install andsystem administrators access Help for CreoParametric, Creo Simulate,Creo Direct, Creo Layout, andCreo Options Modeler from alocal host computer, a networkdrive, and from a Web server.All usersDescribes how to update theCreo applications on yoursystem.System administrators Describes how to install anduninstall the Creo applicationsand the client-side componentsin silent mode.Updating anInstallation on page 67Installing the CreoApplications in SilentMode on page 145Advanced usersAll usersDescribes the steps to completethe installation of Creoapplications and the procedureto uninstall them.Related DocumentationThe following documents on the Reference Documents page may be helpful asyou use this guide: Installing Creo 2.0: Creo Schematics Installing Creo 2.0: Creo View Installing Creo 2.0: Creo Illustrate10Installing Creo 2.0: Creo Parametric, Creo Direct, Creo Layout, Creo Simulate, andCreo Options Modeler

FlexNet Publisher License Administration Guide that discusses the third-partylicense management software for distributing Creo licenses Installing and Configuring the Standalone PTC License Server that discussesthe installation of the lmadmin-based PTC License ServerTechnical SupportContact PTC Technical Support via the PTC Web site, phone, fax, or e-mail if youencounter problems using your software. You can log a new case or track anexisting case or SPR (Software Performance Report) using the PTC Web page athttps://www.ptc.com/appserver/cs/portal. To log a new case, see the eSupportTools on the left.You must have a Service Contract Number (SCN) before you can receivetechnical support. You can find this number on your Shipment confirmation e-mailfrom PTC or by contacting Customer Care. See the Contact table in the CustomerSupport Guide.Documentation for PTC ProductsPTC provides documentation for download at PTC.com and also on a DVD. Thefollowing forms of documentation for Creo Parametric, Creo Direct, Creo Layout,Creo Simulate, and Creo Options Modeler are available: A Help Center with context-sensitive Help, search facility, and quick links tohelpful information. Installing Creo 2.0: Creo Parametric, Creo Direct, Creo Layout, CreoSimulate, and Creo Options Modeler and other books as PDF files. To viewand print the books, you must have the Adobe Acrobat Reader installed.After you install the Help component, press F1 on a user interface item to getcontext-sensitive Help. To access the Help Center, click.To access all PTC Documentation from PTC.com, you must have a valid useraccount. Go to the New Account page to request a user account or call theCustomer Support.Feedback to DocumentationPTC welcomes your suggestions and comments on its documentation—sendfeedback to the following address:mcad-documentation@ptc.comPlease include the name of the application and its release with your comments.For online books, provide the book title.About This Guide11

Additionally, you can report any documentation issues using the online CaseLogger tool. On the second Case Logger page, select a product, release, datecode,and then select Help Center / Documentation from the Technical Area list. Uponsubmission of all information, a case number is returned immediately.Documentation ConventionsPTC documentation uses the following conventions:ConventionBoldCourierCourier with lessthan and greaterthansymbols ( )12ItemMenu paths, dialog box options,buttons, and other selectableelements from the user interfaceUser input, system messages,directories, and file namesVariables for which anappropriate value is substitutedExampleClick File New.Click OK.Processingcompleted.output LOADPOINT Installing Creo 2.0: Creo Parametric, Creo Direct, Creo Layout, Creo Simulate, andCreo Options Modeler

1Preparing to Install Your PTCSoftwareWhat You Receive .14Generating Licenses.14Before You Begin .15Opening a PTC Online Account .15About PTC Installation Assistant.16Working with PTC Installation Assistant .18PTC Software License Agreement .19Authenticating Your User Access .20This chapter describes the materials in your software shipment. It also provides anoverview of how you can use PTC Installation Assistant for obtaining licenses andinstalling your software.13

What You ReceivePTC sends the following materials related to your software order: PTC Software Order Confirmation e–mail—Before the receipt of your PTCsoftware, you will receive an e-mail containing all the details of your order. Software and Help DVDs—Your order contains one or more DVDs for eachproduct purchased. It also contains the Help DVD for the Creo applications:Creo Parametric, Creo Direct, Creo Layout, Creo Simulate, and Creo OptionsModeler in all the supported languages.Generating LicensesBoth new and existing customers can generate licenses in one of two ways. Using PTC Installation Assistant Using PTC License Management Web tools—Request your License Pack viae-mail.New Software Orders and ConfigurationsFor new software orders, configure the license for the purchased products in oneof the following ways: Use PTC Installation Assistant to generate the license and install PTC LicenseServer.Contact PTC License Management directly for licenses.Click the Configure New Software link under License Management on the CreoeSupport Center page and follow the instructions.Maintenance ShipmentsIf you are updating your PTC software, you can use PTC Installation Assistant togenerate a license file. The license generation process is based on the product codefor your Maintenance Release shipment. Alternatively, you can request electroniccopies of your License Packs by either contacting PTC License Managementdirectly or using the Creo eSupport Center page and clicking Retrieve ExistingLicense Packs under License Management and following the instructions. ALicense Pack for a Maintenance Release shipment contains all the qualifyinglicenses for the specified site.14Installing Creo 2.0: Creo Parametric, Creo Direct, Creo Layout, Creo Simulate, andCreo Options Modeler

NoteThe contents of the License Pack reflect your order. If your configurationshave changed since a maintenance release, contact PTC License Managementfor a new License Pack.Before You BeginBefore you install your Creo software, make sure that the following prerequisitesare met: You have opened an online account at PTC.com. You have received the Software Confirmation Order e-mail with the productcode or the Sales Order Number for your shipment. Alternatively, you musthave received your License Pack via e-mail from PTC License Management. You have received the product DVD in your software shipment. If not, followthe link on your Software Confirmation Order e-mail to download theinstallation package to a folder on the local or the network computer. You have checked the Hardware Notes for platform support, systemrequirements, and supported graphics card details at www.ptc.com/WCMS/files/135225/en/creo2 hw notes.pdf. If you are an existing user, you must have verified whether a FlexNetPublisher license server is available for updating with new license codes. You have read the READ THIS FIRST document for installation prerequisites.Opening a PTC Online AccountYou must have a PTC online account to generate a license and install the Creoapplications. Use the following instructions to create an online account:1. On a computer connected to the Internet, go to the New Account page.2. Fill in any empty boxes.3. Click Create Account. A confirmation page indicates a successful accountcreation.4. Review and print this confirmation for your record. A confirmation of youraccount is sent to your e-mail address.Preparing to Install Your PTC Software15

Resetting Your PasswordIf at any time you do not remember your PTC.com password, follow theseinstructions:1. Open the Reset Your Password page.2. Type your user name.3. Click Continue. A URL to reset your password is sent to your e-mail address.About PTC Installation AssistantPTC Installation Assistant generates licenses and installs the Creo applicationsbased on the license sources that you have been provided. You can perform thefollowing tasks, many automatically, using PTC Installation Assistant: Generate or update node-locked or floating licenses at runtime Drag-and-drop previously downloaded node-locked or floating license files Download node-locked licenses to a specific location. In case of floatinglicenses, install PTC License Server Identify license sources listed in a PTC D LICENSE FILE variable set onyour computer or if a license server is already running View a list of the available applications based on the entitlements listed in thelicense file Download and install the Creo applications from PTC.com Perform a simple installation. Alternatively, customize the installation to addspecific features and configurations Reconfigure an existing installationSee Workflow for Installation and Configuration on page 177 for flowcharts onthe installation and reconfiguration tasks.Accessing PTC Installation AssistantYou can access PTC Installation Assistant from the DVD in your softwareshipment. You can also download the Assistant from the Web by following thelink on your PTC Software Order Confirmation e-mail. After downloading theinstallation package from the Web, extract the contents to a folder on yourcomputer or onto a network server location depending on how you want toconfigure your installation.16Installing Creo 2.0: Creo Parametric, Creo D

PTC provides documentation for download at PTC.com and also on a DVD. The following forms of documentation for Creo Parametric, Creo Direct, Creo Layout, Installing Creo 2.0: Creo Parametric, Creo Di

Related Documents:

PTC\Creo 3.0. creo_otk_loadpoint_app The location where the PTC Creo Object TOOLKIT C application files are installed, that is, creo_ loadpoint \ datecode \Common Files\ otk\otk_cpp. . Extend the PTC Creo Parametric and PTC Creo Direct user interface with

environment, drawing setups, libraries ) Language settings for PTC Creo Parametric, PTC Creo Direct, PTC Creo Simulate, PTC Creo Layout, PTC Pro/INTRALINK, PTC Windchill PDMLink, and TOOLBOX Central storage of all configuration setti

PTC MathCAD & Creo Parametric Integration Guide MathCAD and Creo Parametric are well integrated and the process is documented. This one-page guide aims to clarify this process. Prerequisites: User must have Creo Parametric and PTC MathCAD installed. See Article CS201396 for version requirements. How to Integrate PTC MathCAD & Creo Parametric: 1.

Introduction to Creo Parametric 3.0 Advanced Modeling using Creo Parametric 3.0 Advanced Assembly Design using Creo Parametric 3.0 Introduction to Creo Simulate 3.0 Detailing using Creo Parametric 3.0 Surfacing using Creo Parametric 3.0 Sheetmetal using Creo

Creo View Lite Creo View MCAD ECAD-MCAD Visualization Cross selection between Electronic and Mechanical designs* X Toolkits Creo View Java Toolkit* X X Creo View Web Toolkit * X X X Creo View Office Toolkit * X X X Creo View WebGL Toolkit * * * * Licensing FlexLM license enabled X Supported Optional m

Surface finish: Access symbol-based surface finish. Note - This is a special royalty-bearing extension to core PTC Creo . Technical documentation in form of User Guide and an APIWizard. J-Link and PTC Creo Parametric TOOLKIT can be used in one application . PTC Creo UI Editor

PTC CREO 3 Parametric Training Program PTC Creo Parametric 3.0 is truly parametric software that updates every part in an assembly even a mere change occurred in designing. The user can create 3D sectioning in an easy way and if any problem occurs then PTC Creo 3.0 performs real-time interference checking of all parts within the

Type A02 : Cable suffices This type comprises people with some limited interest in electronic technologies but who have neither the education nor income to become heavily engaged in using them. Many of this type are men who have recently retired or who are approaching retirement. A high proportion has access to cable television. Type A03 : Technology as fantasy This type contains many old .