Series 2A - Parker
Series 2AHeavy Duty Air Cylinderszc17Producción CNC, SA de CVAv. Pie de la Cuesta No. 1440Local 2 Col. Amalia SolorzanoQuerétaro, Qro. CP 76130Tel. (442) 253 7834Fax. (442) 253 7997www.parkercnc.com.mxContentsFeatures . 2Specifications . 3Design Features . 4Mountings . 6Double Rod Models . 32Cylinder Accessories . 33Ordering Information . 36Series 2AN . 39“Style 55” Rod End . 431Parker Hannifin CorporationActuator DivisionWadsworth, Ohio USA
Parker Series 2AAir CylinderWhen your application requirements demandperformance and maximum reliability, step up tothe Parker Series 2A cylinder. Parker Series 2Acylinders incorporate the highest quality materialsand assembly practices to ensure superiorperformance and long life. Series 2A cylinders arerated for air service to 250 PSI and conform toANSI and NFPA specifications for dimensionaland mounting standards. Available in 18 differentNFPA mounting styles and 13 bore sizes, theSeries 2A provides the end user the ultimate inflexibility. All Series 2A cylinders come prelubricated for initial system start up.To assure premium quality, every Series 2Acylinder is thoroughly cycle tested beforeshipment. All Series 2A cylinders come standardwith an 18-month warranty from defects in materialand workmanship. The standard warranty may beincreased to 5 years if Parker air preparation units(FRL’s) are incorporated into the pneumaticsystem.With the most proven track record in the industry,come see why the Series 2A cylinder is the bestchoice for your heavy-duty industrial pneumaticcylinder requirements. For additional informationregarding the design of this product, please referto pages 4 and 5 of this section.2Parker Hannifin CorporationActuator DivisionWadsworth, Ohio USA
Heavy Duty Air CylindersSeries 2ACatalog AU03-0900P-2/NASpecifications / MountingsC052Standard Specifications Heavy Duty Service – ANSI/(NFPA) T3.6.7R2-1996Specifications and Mounting Dimension Standards Standard Construction – Square Head – Tie Rod Design Nominal Pressure – Up to 250 PSI Air Service Standard Fluid – Filtered Air Standard Temperature – -10 F. to 165 F. Optional High Temperature 14 F. to 250 F. Bore Sizes – 1" through 14" (Larger sizes available) Piston Rod Diameter – 1/2" through 51/2" Mounting Styles – 18 standard styles at various applicationratings Strokes – Available in any practical stroke length Cushions – Optional at either end or both ends of stroke.“Float Check” at cap end. Rod Ends – Three Standard Choices – Specials to OrderIn line with our policy of continuing product improvement, specifications in this catalog aresubject to change.Note: Series 2A Air Cylinders fully meet ANSI/(NFPA) T3.6.7R2-1996 Specifications and Mounting Dimension Standards for Square Head Industrial Fluid Power Cylinders.Parker Style TB, JB, HB, C, DB, and BB are available in 7" bore size, see page 18.Available Mounting StylesTie Rods Extended Head EndTie Rods Extended Cap EndStyle TB1"-6", Page 67", Page 188"-14", Page 201"-6", Page 67", Page 18(NFPA MX3) 8"-14", Page 20Head Square FlangeCap Rectangular FlangeCenterline Lugs11/2"-6", Page 108"-14", Page 22Style F1"-6", Page 107", Page 19(NFPA MS3) 8"-14", Page 241"-6", Page 167", Page 198"-14", Page 26Intermediate Fixed Trunnion11/2"-6", Page 148"-14", Page 28Style G1"-6", Page 12(NFPA MS1) 8"-14", Page 24Head Trunnion1"-6", Page 147", Page 19(NFPA MP2) 8"-14", Page 28(NFPA MS7)Cap TrunnionStyle DStyle DB1"-6", Page 147", Page 19(NFPA MT1) 8"-14", Page 28Spherical BearingStyle DD(NFPA MS2)Side End Lugs1"-6", Page 12(NFPA MS4) 8"-14", Page 26Style BC(NFPA MP1) 1"-6", Page 16Style CStyle CBCap Detachable ClevisStyle BB(NFPA MF1)Side Lug1"-6", Page 107", Page 19(NFPA MF6) 8"-14", Page 22Side End AnglesSide TappedCap Fixed Clevis(NFPA MX1) 1"-6", Page 6Style HB1"-6", Page 87", Page 18(NFPA MF2) 8"-14", Page 20Style EStyle JCap Square FlangeStyle H(NFPA MF5) 1"-6", Page 6Head Rectangular FlangeStyle TD1"-6", Page 67", Page 18(NFPA MX2) 8"-14", Page 20Style JB1"-6", Page 87", Page 188"-14", Page 20Tie Rods Extended Both EndsStyle TC(NFPA MT2)Double Rod CylindersStyle KTB ShownStyle SBMost of the above illustratedmounting styles are available indouble rod cylinders.See Catalog Page 32.11/2"-6", Page 30(NFPA MT4) 8"-14", Page 313Parker Hannifin CorporationActuator DivisionWadsworth, Ohio USA
The inside story on whySeries 2A is your best choice inheavy duty pneumatic cylindersPrimary Seal – Unique Serrated Lipseal is aproven leakproof design (Parker Patent #2997318).The rod seal is completely self-compensating andself-relieving to withstand variations and conform tomechanical deflection that may occur.Steel Head – Bored and groovedto provide concentricity for matingparts.Ports – NPTF portsare standard.End Seals – Pressure-actuatedcylinder body-to-head and cap“O” rings.Piston Rod Stud –Furnished on 2" diameterrods and smaller whenstandard style #4 rodend threads are required,or on 13/8" diameter rodsand smaller when style#8 threads are required.Piston rod studs are alsoavailable in 2 times thecatalog “A” dimensionlength. Studs have rolledthreads, and are madefrom high strength steel.Anaerobic adhesive isused to permanently lockthe stud to the piston rod.“Jewel” Rod GlandAssembly –Externally removablewithout cylinderdisassembly. Longbearing surface isinboard of the sealsassuring positivelubrication from withinthe cylinder. An “O”ring is used as a sealbetween gland andhead and also servesas a prevailingtorque-type lock.Secondary Seal –A Double-Service Wiperseal (Parker Patent #2907596) acts asa secondary pressure seal on theextend stroke and cleans the rod onthe return stroke.High Strength TieRods – Made from100,000 psi minimumyield steel with rolledthreads for addedstrength.Adjustable Floating Cushions – Cushionsare optional and can be supplied at head end,cap end, or both ends without change inenvelope or mounting dimensions.The Cylinder BodyHard chrome-platedbore, steel tubingfinished to a 15 microinch finish on 11/2"through 14" boresizes. 1" bore size isaluminum with hardcoated bore.Adjustable floating cushionsCushions are optional, and can be supplied at head end,cap end, or both ends without change in envelope ormounting dimensions. All Parker cushions are adjustable.The Series 2A cylinder design incorporates the longestcushion sleeve and cushion spear that can be provided inthe standard envelope without decreasing the rod bearingand piston bearing lengths.adjacent to the needle valve (except on certain boresof mounting style C where it is mounted opposite theneedle valve). The needle valve may be identified bythe fact that it is slotted.d. The check and needle valves are interchangeablein the head.(2) When a cushion is specified at the cap end:a. A cushion spear is provided on the pistonrod assembly.b. A “float check” self-centering bushing is providedwhich incorporates a large flow check valve for fast“out-stroke” action.c. A socket-keyed needle valve is provided that isflush with the side of the cap when wide open. It islocated on side number 2 in all mounting stylesexcept D, DB, DD, and E. These styles have needlevalves located on side number 3.(1) When a cushion is specified at the head end:a. A self-centering sleeve is furnished on the pistonrod assembly.b. A needle valve is provided that is flush with theside of the head when wide open. It may beidentified by the fact that it is socket-keyed. Needlevalves are located on side number 2, in all mountingstyles except D, DB, DD, and E. These styles haveneedle valves located on side number 3.c. A springless check valve is provided (that is alsoflush with the side of the head) and is mounted4Parker Hannifin CorporationActuator DivisionWadsworth, Ohio USA
The exclusive“Jewel” glandgives you longercylinder life, betterperformance andlower costs.Piston Rod – Medium carbon steel, induction case-hardened to 54Rc, hard chrome-plated and polished to 10 RMS finish. Piston rods aremade from 90,000 to 100,000 psi minimum yield material in 1/2" through4" diameters. Larger diameters vary between 57,000 and 90,000 psiminimum yield material, depending on rod diameter. The piston threadequals the catalog style #4 rod end thread for each rod diameter toassure proper piston-to-rod thread strength. Two wrench flats areprovided for rod end attachment.Ports – NPTF portsare standard.An extra-long inboard bearing surface insures lubricationfrom within the cylinder. Outboard of the bearing surfaceare two leakproof seals – The Lipseal and Wiperseal.The serrated Lipseal (primary seal) is completely selfcompensating and self-relieving. It adjusts to mechanicaldeflections or any pressure variation from near-zero torated operating pressure. The result is positive, no-leaksealing regardless of conditions.The Wiperseal has two functions: On the advance stroke,it acts as a secondary pressure seal. On the return, itwipes away any dirt on the rod. This means less wear andlonger life for working parts.You can replace a “Jewel” gland without removing the tierods or retainer. Downtime and maintenance costs areminimized.Steel Cap – Bored and groovedto provide concentricity for matingparts.Alloy Steel Tie Rod NutsAlign-A-Groove –(Patent #3043639) – A 3/16" widesurface machined at each end ofthe cylinder body. This makesprecise mounting quick and easy.Prelubricated Wearing SurfacesParker Series 2A Air Cylinders are factory prelubricated.Lube-A-Cyl applied to seals, piston, cylinder bore, pistonrod and gland surfaces provides lubrication for initial startup operation. Lube-A-Cyl has been field and laboratorytested, and is recommended by Parker for air cylinderswhere lubricant should remain in the cylinder and not beexpelled into the atmosphere.One-Piece Nodular IronPiston – The wide piston surfacecontacting cylinder bore reducesbearing loads. Anaerobicadhesive is used to permanentlylock and seal the piston to therod.Pistons on cylinderbores 8" and largercome standard with awear band to ensurelong service life.Piston Lipseal – Fully dynamicand self-compensating for variations in pressure, mechanicaldeflections, and wear.Piston with Wear BandStandard 8"-14" BoreNut Retained PistonOptional at extra chargeCushion er*(Inches)5/81Cushion CylinderBore(Inches)6Cushion 1/1611/413/8111/1611/451/2215/1611/413/451/221011 5/1613/161 5/1613/413/451/221/2911 3/1613/413/4251/28111/16213/4*Head end cushions for rod diameters not listed have cushion lengths with the limits shown.For cushion selection and sizing, see Section I of this catalog for additional information.5Parker Hannifin CorporationActuator DivisionWadsworth, Ohio USA
Heavy Duty Air CylindersSeries 2ACatalog AU03-0900P-2/NAMountings – 1" to 6" Bore SizesC052Basic Mounting (T) —NFPA MX0 — no tie rods extended can be supplied uponrequest.Tie Rods ExtendedStyle TB(NFPA Style MX3)ZB STROKEYP STROKELB STROKEWEEE1AAEMM2 R4DD3KJGFBBRStyle TB (NFPA MX3). Head Tie Rods Extended, illustrated: Style TC (NFPA MX2), Cap Tie Rods Extended; and StyleTD (NFPA MX1), Both Ends Tie Rods Extended are also available. All “T” styles can be dimensioned from Style TBdrawing at right.Head Rectangular FlangeStyle J(NFPA Style MF1)ZB STROKEYP STROKELB STROKEWUFEE1E24RMM3TFCap Rectangular FlangeStyle H(NFPA Style MF2)KJGFFB4 HOLESEWFZF STROKEYP STROKELB STROKEWUFEE1MMRKJGF24 E3FEXFTFRod End Dimensions — see table 2Thread Style 8Thread Style 4Thread Style 9(NFPA Style IM)Intermediate Male(NFPA Style SM)Small MaleLAALAWC(NFPA Style SF)Small FemaleAVKKA18WCVCCKKMM BD WRENCHFLATSNA18MM BMM BD WRENCHFLATSA high strength rod end stud is supplied on thread style 4 through 2"diameter rods and on thread style 8 through 13/8" diameter rods.Larger sizes or special rod ends are cut threads. Style 4 rod ends arerecommended where the workpiece is secured against the rodshoulder. When the workpiece is not shouldered, style 4 rod ends areD WRENCHFLATSNANAC18VWrecommended through 2" piston rod diameters and style 8 rod endsare recommended on larger diameters. Use style 9 for applicationswhere female rod end threads are required. If rod end is not specified,style 4 will be supplied.6FB4 HOLES“Special” ThreadStyle 3Special thread,extension, rod eye,blank, etc., arealso available.To order, specify“Style 3” and givedesired dimensions for CC orKK, A and LA. Ifotherwise special,furnish dimensioned sketch.Parker Hannifin CorporationActuator DivisionWadsworth, Ohio USA
Heavy Duty Air CylindersSeries 2ACatalog AU03-0900P-2/NAMountings – 1" to 6" Bore SizesC052Table 1—Envelope and Mounting DimensionsBore1*11/2221/231/4456AA BB1.53 3/42.0212.6 11/83.1 11/83.9 13/84.7 13/85.8 113/166.9 01/2-20E 221/2333/441/251/261/2EENPTFAdd 45/165/163/83/87/167/16RTFUF21/21.0821.43 23/4 33/81.84 33/8 41/82.19 37/8 45/82.76 411/16 51/23.32 5 7/16 61/44.10 65/8 75/84.88 75/8 5/825/827/831/8* Cushions not available on 1" bore.** On 1", 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinderswith No. 2 rods. Minimum of three full threads available. 1" bore head dimension is 13/4" x 11/2". See page 16 for dimensional information on 1" bore cylinders.Table 3 — Envelope andMounting DimensionsTable 2—Rod 313/8413/4221/2331/2ThreadStyle Style84&9CCKK7/16-20 5/16-241/2-20 7/16-201/2-20 7/16-203/4-167/8 -141/2-20 7/16-2011/4-12 1-143/4-167/8 -141/2-20 7/16-2011/2-12 11/4-123/4-167/8 -1411/4-12 1-143/4-167/8 -1413/4-12 11/2-1211/4-12 1-1411/2-12 11/4-123/4-167/8 -1421/4-12 17/8-1211/4-12 1-1411/2-12 11/4-1213/4-12 11/2-123/4-167/8 -1413 /4-12 21/2-1211/4-12 1-1411/2-12 11/4-1213/4-12 11/2-1221/4-12 17/8-1223/4-12 21/4-1211/4-12 1-1433/4-12 3-1211/2-12 11/4-1213/4-12 11/2-1221/4-12 17/8-1223/4-12 21/4-1231/4-12 1/4331/231/2Rod Extensions and Pilot DimensionsAdd Stroke 41 115/16 41/2 411/16 47/89/161/45/81/ 213/81.124 3/81 115/16 41/2 411/16 47/81/ 29/161/45/8547/81.124 3/813/81 115/16 45/81/27/8551/453/81.499 1/221/8 15/16113/8 25/165/89/161/41/ 2513/81 115/16 45/8 415/161.124 3/81751551.999/8/81 /4 15/8 29/16 51/4 59/16 55/81 /8 2 /8 1 /167/8555/16 53/81.499 1/22 1/8 15/16 1/2113/8 25/165/89/161/41/ 213/81 115/16 43/4 51/16 51/81.124 3/8611/2 17/8 213/16 55/8 515/162.374 3/411/2 3 1/2 111/16 3/41115171.499/2/82 /8/16/2113/8 25/16 51/8 57/16 51/211/8 27/8 15/16 5/81.999 5/811/4 15/8 29/16 53/8 511/16 53/43/47/861/4617/8 15/16 1/41.499 1/213/8 27/16 55/865/867/82.624 7/8 111/16 35/8 115/16 1/213/8231/16 61/4715553111561/26 /4/81 /8 2 /8 1 /16/811.9991 /8 2 /16 5 /863/461/211/4 17/8 215/16 61/82.374 3/411/2 3 1/4 111/16 1/23/47/8661/41.499 1/217/8 15/16 1/413/8 27/16 55/85/871/867/83.124121/16 45/8 2 3/815/8 21/4 35/16 61/2713515551161/26 /41.999/8/811 /8 2 /8 1 /161 /8 2 /16 5 /861/263/42.374 3/411/2 3 1/4 111/16 1/211/4 17/8 215/16 61/867/865/82.624 7/8 111/16 35/8 115/16 1/213/8231/16 61/43/47/81.499 1/217/8 15/16 1/413/8 27/16 57/8 65/16 61/25/84.2491351/8 33/815/8 21/4 35/16 63/4 73/16 73/81.999 5/811/8 25/8 15/16 3/8115/8 211/16 61/8 69/16 63/472.374 3/411/4 17/8 215/16 63/8 613/1611/2 3 1/4 111/16 1/22.624 7/8 111/16 35/8 115/16 1/213/8231/16 61/2 615/16 71/85/83.124121/16 45/8 23/815/8 21/4 35/16 63/4 73/16 73/85/83.749115/8 21/4 35/16 63/4 73/16 73/825/8 51/8 27/87/81.999 5/811/8 21/2 15/16 1/415/8 213/16 65/8 71/16 73/81/2813 3 /8 51/2 37/811/2 21/4 37/16 71/4 711/164.74911/8 17/8 31/16 67/8 75/16 75/82.374 3/411/2 31/8 111/16 3/8777/16 73/411/422.624 7/8 111/16 31/2 115/16 3/833/161/28121/16 41/2 23/811/2 21/4 37/16 71/4 711/163.1241/281527/811/2 21/4 37/16 71/4 711/163.74925/81/2813533/811/2 21/4 37/16 71/4 711/164.249Note: Shaded areas indicate non-standard rod sizes that are available and made to order.7Parker Hannifin CorporationActuator DivisionWadsworth, Ohio USA
Heavy Duty Air CylindersSeries 2ACatalog AU03-0900P-2/NAMountings – 1" to 6" Bore SizesC052Head Square FlangeStyle JB(NFPA Style MF5)ZB STROKEUFE1YP STROKELB STROKEWEEUF EMM2 R TF4JGF3RFB8 HOLESKWFTFCap Square FlangeStyle HB(NFPA Style MF6)ZF STROKEYUFE1P STROKELB STROKEWEEMMTFR 24 E UFKFGJF3RFB8 HOLESXFTFRod End Dimensions — see table 2Thread Style 8Thread Style 4Thread Style 9(NFPA Style IM)Intermediate Male(NFPA Style SM)Small MaleLAALAWC(NFPA Style SF)Small FemaleAVKKA18WCVCCKKMM BD WRENCHFLATSNA18MM BMM BD WRENCHFLATSA high strength rod end stud is supplied on thread style 4 through 2"diameter rods and on thread style 8 through 13/8" diameter rods.Larger sizes or special rod ends are cut threads. Style 4 rod ends arerecommended where the workpiece is secured against the rodshoulder. When the workpiece is not shouldered, style 4 rod ends areD WRENCHFLATSNANAC18VWrecommended through 2" piston rod diameters and style 8 rod endsare recommended on larger diameters. Use style 9 for applicationswhere female rod end threads are required. If rod end is not specified,style 4 will be supplied.8“Special” ThreadStyle 3Special thread,extension, rod eye,blank, etc., arealso available.To order, specify“Style 3” and givedesired dimensions for CC orKK, A and LA. Ifotherwise special,furnish dimensioned sketch.Parker Hannifin CorporationActuator DivisionWadsworth, Ohio USA
Heavy Duty Air CylindersSeries 2ACatalog AU03-0900P-2/NAMountings – 1" to 6" Bore SizesC052Table 1—Envelope and Mounting DimensionsBore1*11/2221/231/4456EEENPTF1/4 3/8**221/2 3/8**3/8**31/233/41/241/21/251/23/461/2Add 21.43 23/41.84 33/82.19 37/82.76 411/163.32 5 7/164.10 65/84.88 47/847/851/853/4P21/821/421/423/825/825/827/831/8* Cushions not available on 1" bore.** On 1", 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinderswith No. 2 rods. Minimum of three full threads available. 1" bore head dimension is 13/4" x 11/2". See page 16 for dimensional information on 1" bore cylinders.Table 3 — Envelope andMounting DimensionsTable 2—Rod 313/8413/4221/2331/2ThreadStyle Style84&9CCKK7/16-20 5/16-241/2-20 7/16-201/2-20 7/16-203/4-167/8 -141/2-20 7/16-2011/4-12 1-143/4-167/8 -141/2-20 7/16-2011/2-12 11/4-123/4-167/8 -1411/4-12 1-143/4-167/8 -1413/4-12 11/2-1211/4-12 1-1411/2-12 11/4-123/4-167/8 -1421/4-12 17/8-1211/4-12 1-1411/2-12 11/4-1213/4-12 11/2-123/4-167/8 -1413 /4-12 21/2-1211/4-12 1-1411/2-12 11/4-1213/4-12 11/2-1221/4-12 17/8-1223/4-12 21/4-1211/4-12 1-1433/4-12 3-1211/2-12 11/4-1213/4-12 11/2-1221/4-12 17/8-1223/4-12 21/4-1231/4-12 1/4331/231/2Rod Extensions .000-.002BCD3/83/8.9991/21.124 3/81/21.124 3/87/81.499 1/21/21.124 3/81.999 5/811/87/81.499 1/21/21.124 3/82.374 3/411/27/81.499 1/211/81.999 5/87/81.499 1/22.624 7/8 111/1611/81.999 5/82.374 3/411/27/81.499 1/2121/163.1241.999 5/811/811/22.374 3/42.624 7/8 111/167/81.499 1/24.2491311/81.999 5/82.374 3/411/22.624 7/8 111/16121/163.12413.74925/811/81.999 5/813 3/84.7492.374 3/411/22.624 7/8 111/16121/163.12413.74925/8134.249Add Strokeand Pilot DimensionsLA11/413/813/821/813/827/82 1 /813/83 1/221/827/817/835/825/83 1/417/845/825/83 1/435/817/851/825/83 1/43/42 3/ 8875/873/4888Note: Shaded areas indicate non-standard rod sizes that are available and made to order.9Parker Hannifin CorporationActuator DivisionWadsworth, Ohio USA
Heavy Duty Air CylindersSeries 2ACatalog AU03-0900P-2/NAMountings – 1" to 6" Bore SizesC052Side LugStyle C(NFPA Style MS2)ZB STROKEYP STROKELB STROKEWUSEE1E24MME –.0052 –.010ST3SBSW 4 HOLESSWETSSWSWCenterline LugsStyle E(NFPA Style MS3)JGFSWSUXSKSWSUSS STROKEZB STROKEYP STROKELB STROKEWUSEESB4 HOLES1STE4MM23Side TappedStyle F(NFPA Style MS4)SWSWJGFETSSWSWSWSUXSKSWSUSS STROKEZB STROKEYP STROKELB STROKEWEEE1E24MME –.0052 –.0103NT THREAD, ND DEEP4 TAPPED MTG. HOLESRod End Dimensions — see table 2Thread Style 8Thread Style 4LAAC(NFPA Style SF)Small FemaleLAWAVKKVCCKKMM BD WRENCHFLATSA18WCNA18MM BMM BD WRENCHFLATSA high strength rod end stud is supplied on thread style 4 through 2"diameter rods and on thread style 8 through 13/8" diameter rods.Larger sizes or special rod ends are cut threads. Style 4 rod ends arerecommended where the workpiece is secured against the rodshoulder. When the workpiece is not shouldered, style 4 rod ends areD WRENCHFLATSNA18NACVWrecommended through 2" piston rod diameters and style 8 rod endsare recommended on larger diameters. Use style 9 for applicationswhere female rod end threads are required. If rod end is not specified,style 4 will be supplied.10KSN STROKEXTThread Style 9(NFPA Style IM)Intermediate Male(NFPA Style SM)Small MaleJGFTN“Special” ThreadStyle 3Special thread,extension, rod eye,blank, etc., arealso available.To order, specify“Style 3” and givedesired dimensions for CC orKK, A and LA. Ifotherwise special,furnish dimensioned sketch.Parker Hannifin CorporationActuator DivisionWadsworth, Ohio USA
Heavy Duty Air CylindersSeries 2ACatalog AU03-0900P-2/NAMountings – 1" to 6" Bore SizesC052Table 1—Envelope and Mounting DimensionsBore1*11/2221/231/4456EEE NPTF1/4 32/8**21/2 3/8**3/8**31/233/4114 /2/21/251/23/461/2Add 83/87/167/16NT SB 10-24 9/32†1/4-207/165/16-187/163/8-16 7/161/2-139/161/2-139/165/8-11 13/163/4-10 7/831/8SS27/8†27/827/8331/431/431/835/8* Cushions not available on 1" bore.** On 1", 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinderswith No. 2 rods. Minimum of three full threads available. Upper surface spot-faced for socket head screws.† Mounting style E not available in 1" bore. 1" bore head dimension is 13/4" x 11/2". See page 16 for dimensional information on 1" bore cylinders.Table 3 — Envelope andMounting DimensionsTable 2—Rod 313/8413/4221/2331/2ThreadStyle Style84&9CCKK7/16-20 5/16-241/2-20 7/16-201/2-20 7/16-203/4-167/8 -141/2-20 7/16-2011/4-12 1-143/4-167/8 -141/2-20 7/16-2011/2-12 11/4-123/4-167/8 -1411/4-12 1-143/4-167/8 -1413/4-12 11/2-1211/4-12 1-1411/2-12 11/4-123/4-167/8 -1421/4-12 17/8-1211/4-12 1-1411/2-12 11/4-1213/4-12 11/2-123/4-167/8 -1413 /4-12 21/2-1211/4-12 1-1411/2-12 11/4-1213/4-12 11/2-1221/4-12 17/8-1223/4-12 21/4-1211/4-12 1-1433/4-12 3-1211/2-12 11/4-1213/4-12 11/2-1221/4-12 17/8-1223/4-12 21/4-1231/4-12 21/2-12Rod Extensions and .000-.002ABCD5/83/83/8.9993/41/21.124 3/83/41/21.124 3/87/811/8 1.499 1/23/41/21.124 3/815/8 1.999 5/811/87/811/8 1.499 1/23/41/21.124 3/822.374 3/411/27/811/8 1.499 1/215/8 1.999 5/811/87/811/8 1.499 1/221/4 2.624 7/8 111/1615/8 1.999 5/811/822.374 3/411/27/811/8 1.499 1/233.124121/1615/8 1.999 5/811/822.374 3/411/221/4 2.624 7/8 111/167/811/8 1.499 1/231/2 4.2491315/8 1.999 5/811/822.374 3/411/221/4 2.624 7/8 111/1633.124121/1631/2 3.749125/815/8 1.999 5/811/8413 3/84.74922.374 3/411/221/4 2.624 7/8 111/163121/163.12431/2 3.749125/831/2 4.24913Pilot DimensionsLA11/413/813/821/813/827/82 1 /813/83 1/221/827/817/835/825/83 1/417/845/825/83 1/435/817/851/825/83 1/415/161/43/41/ 2115/1615/16111/161/21/ 21/213/8111/415/161/43/45/82 3/ 1/25/83/83/81/21/21/27/167/161/ 21/ adedstyleareasE notindicateavailablenon-standardin 1" bore. rod sizes that are available and made to order.11Parker Hannifin CorporationActuator DivisionWadsworth, Ohio USA
Heavy Duty Air CylindersSeries 2ACatalog AU03-0900P-2/NAMountings – 1" to 6" Bore SizesC052Side End AnglesStyle CB(NFPA Style MS1)ZA STROKEXA STROKEYP STROKELB STROKEWEAB6 HOLESEE41E 3MMSAT2ATAOAHALJGFKALAOSA STROKESide End LugsStyle G(NFPA Style MS7)ZE STROKEXE STROKEYP STROKELB STROKEWEEEK12E 4MME —.0052 —.010ET164EB4 HOLES3RESESLA(NFPA Style SF)Small FemaleLAWCAVVCCKKMM BD WRENCHFLATSA18WCKKNA18ELThread Style 9(NFPA Style IM)Intermediate MaleAELSE STROKERod End Dimensions — see table 2Thread Style 8Thread Style 4(NFPA Style SM)Small MaleMM BMM BD WRENCHFLATSA high strength rod end stud is supplied on thread style 4 through 2"diameter rods and on thread style 8 through 13/8" diameter rods.Larger sizes or special rod ends are cut threads. Style 4 rod ends arerecommended where the workpiece is secured against the rodshoulder. When the workpiece is not shouldered, style 4 rod ends areEOJGFEOD WRENCHFLATSNA18NACVWrecommended through 2" piston rod diameters and style 8 rod endsare recommended on larger diameters. Use style 9 for applicationswhere female rod end threads are required. If rod end is not specified,style 4 will be supplied.12“Special” ThreadStyle 3Special thread,extension, rod eye,blank, etc., arealso available.To order, specify“Style 3” and givedesired dimensions for CC orKK, A and LA. Ifotherwise special,furnish dimensioned sketch.Parker Hannifin CorporationActuator DivisionWadsworth, Ohio USA
Heavy Duty Air CylindersSeries 2ACatalog AU03-0900P-2/NAMountings – 1" to 6" Bore SizesC052Table 1—Envelope and Mounting DimensionsBore ABAHAL1* 3/8†‡1† 13/16†11/2 7/16 13/1617/16217/16121/2 7/16 15/8131/4 9/16 115/16 11/49/16421/4 11/411/1623/4 13/8513/16631/4 13/8AOATE5/16†1/8† 33/441/251/261/2EEEB NPTF EL1/4 5/163/8**3/43/83/8**15/163/83/8** 11/167/161/27/161/29/161/29/163/4Add StrokeEO ES 1/49/16ET 215/16111 /4 15/3213/8 13/813/4 /85/85/83/4J111111/411/411/411/2* Cushions not available on 1" bore.** On 1", 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinderswith No. 2 r
Parker Series 2A Air Cylinder. When your application requirements demand performance and maximum reliability, step up to the Parker Series 2A cylinder. Parker Series 2A cylinders incorporate the highest quality materials and assembly practices to ensure superior performance and long life. Series 2A cy
Parker Pneumatic B Tie Rod Cylinders Actuator Products 3MA Series 4MA/4ML Series 3MAJ/4MAJ Series 4MNR Series P1D Series . Catalog PDN1000-2US Parker Pneumatic B Tie Rod Cylinders Actuator Products Bore size MM 4. 3MA Series 1 1. 7 Sensor Option) Parker Hannifin Corporation .
21 Ingersoll Rand - Material Handing 21 Ingersoll Rand - Tools 22 Intelligent Actuator Inc. (IAI) 23 KolverUSA 24 LNA Laser Technology 25 MB Connect Line 26 Metreel 27 Mitsubishi Electric Automation 28 Murr Elektronik 29 PARCO Inc. 30 Parker - Airtek 30 Parker - Cylinders 30 Parker - Fluid Connectors 30 Parker - Hydraulics 30 Parker .
PARKER CORE KNOWLEDGE CHARTER SCHOOL 11661 Pine Drive ; Parker, CO 80138 School Code: C32 Girls, grades: PK-JK DRESSES Jersey Polo Dress -Navy w/Parker Core fiberlok (067) Youth 3XS-XL 32.65 Jersey Polo Dress -Green w/Parker Core fiberlok (136) Item #: 0380B0-CP2 Girls, grades: K-8 SHIFTS C
Parker, Gas Turbine Fuel System 1QTD9 Mt. Holley, SC Parker, Gas Turbine Fuel System 4U799 Glendale, AZ Parker, Hydraulic Systems Division 93835 Kalamazoo, MI Parker, Hydraulic Systems Division 26433 Eylria, OH Parker, Nichols Airborne Division 86329 Ayer, MA PW Military Engines 55820, 45153 San Diego, CA PW Military Engines 52661 East Hartford, CT
20 BIOGRAPHIE CHARLIE PARKER 24 BIOGRAPHY CHARLIE PARKER 27 DISCOGRAPHIE CD1 CHARLIE PARKER (1945–1951) 28 DISCOGRAPHIE CD2 CHARLIE PARKER (1947–1952) . Le 26, en bonne forme, il grave Relaxin’ At Camarillo et trois autres faces. Le 4 avril, Charlie et Doris quittent Los Angeles. Le 7 avril, ils s’installent au Dewey Square Hotel pour .
SMB_Dual Port, SMB_Cable assembly, Waterproof Cap RF Connector 1.6/5.6 Series,1.0/2.3 Series, 7/16 Series SMA Series, SMB Series, SMC Series, BT43 Series FME Series, MCX Series, MMCX Series, N Series TNC Series, UHF Series, MINI UHF Series SSMB Series, F Series, SMP Series, Reverse Polarity
Series 2H 2 Parker Hannifin Corporation Industrial Cylinder Division www.parker.com /cylinder Des Plaines, Illinois USA Catalog HY08-1114-6/NA Parker Series 2H Heavy Duty Hydraulic Cylinder Series 2H cylinders set the standard for performance, durability, and trouble free operation. Parker superior design,
Annual Men’s Day Sunday, October 26, 2008 Order of Service Devotion Men’s Day Praise Team Responsive Reading Psalm 1 Congregational Singing This Little Light of Mine Selection Men’s Day Choir Altar Prayer Dance Selection Creations of God Announcements Bro. Robert Shields Pastoral Observations Message Rev. Jeffery A. Lang, Senior Pastor Southside Church & International Ministries Jackson .
